Hamlib/rigs/kit/usrp.c

148 wiersze
3.9 KiB
C

/*
* Hamlib KIT backend - Universal Software Radio Peripheral description
* Copyright (c) 2005 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
/*
* Compile only this model if usrp is available
*/
#if defined(HAVE_USRP)
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include "hamlib/rig.h"
#include "usrp_impl.h"
#include "token.h"
#define USRP_MODES (RIG_MODE_NONE)
#define USRP_FUNC (RIG_FUNC_NONE)
#define USRP_LEVEL_ALL (RIG_LEVEL_NONE)
#define USRP_PARM_ALL (RIG_PARM_NONE)
#define USRP_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_C|RIG_VFO_N(3))
static const struct confparams usrp_cfg_params[] =
{
{
TOK_IFMIXFREQ, "if_mix_freq", "IF", "IF mixing frequency in Hz",
"45000000", RIG_CONF_NUMERIC, { .n = { 0, MHz(400), 1 } }
},
{ RIG_CONF_END, NULL }
};
/*
* GNU Radio Universal Software Radio Peripheral
*
*/
const struct rig_caps usrp_caps =
{
RIG_MODEL(RIG_MODEL_USRP),
.model_name = "USRP",
.mfg_name = "GNU Radio",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TUNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_NONE,
.serial_rate_min = 9600, /* don't care */
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 0,
.has_get_func = USRP_FUNC,
.has_set_func = USRP_FUNC,
.has_get_level = USRP_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(USRP_LEVEL_ALL),
.has_get_parm = USRP_PARM_ALL,
.has_set_parm = RIG_PARM_SET(USRP_PARM_ALL),
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { RIG_CHAN_END, },
.rx_range_list1 = {
{kHz(150), MHz(30), USRP_MODES, -1, -1, USRP_VFO},
{kHz(87.5), MHz(108), RIG_MODE_WFM, -1, -1, USRP_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(150), MHz(30), USRP_MODES, -1, -1, USRP_VFO},
{kHz(87.5), MHz(108), RIG_MODE_WFM, -1, -1, USRP_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{USRP_MODES, 1},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{USRP_MODES, kHz(40)}, /* FIXME */
RIG_FLT_END,
},
.cfgparams = usrp_cfg_params,
.rig_init = usrp_init,
.rig_cleanup = usrp_cleanup,
.rig_open = usrp_open,
.rig_close = usrp_close,
.set_conf = usrp_set_conf,
.get_conf = usrp_get_conf,
.set_freq = usrp_set_freq,
.get_freq = usrp_get_freq,
.get_info = usrp_get_info,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
#endif /* HAVE_USRP */