Hamlib/rigs/icom/icr9500.c

234 wiersze
7.1 KiB
C

/*
* Hamlib CI-V backend - IC-R9500 descriptions
* Copyright (c) 2000-2011 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
#include <hamlib/rig.h>
#include "serial.h"
#include "misc.h"
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#define ICR9500_MODES (RIG_MODE_AM|RIG_MODE_AMS|\
RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|\
RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_WFM)
#define ICR9500_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ICR9500_FUNCS (RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_NR|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK)
#define ICR9500_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF)
#define ICR9500_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
#define ICR9500_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO) /* TBC */
#define ICR9500_HF_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)
#define ICR9500_VFOS (RIG_VFO_A|RIG_VFO_MEM)
#define ICR9500_MEM_CAP { /* FIXME */ \
.freq = 1, \
.mode = 1, \
.width = 1, \
.levels = RIG_LEVEL_ATT, \
}
/* TODO: S-Meter measurements */
/* This is just a copy if IC9700_STR_CAL */
/* Hope it's correct */
#define ICR9500_STR_CAL { 7, \
{ \
{ 0, -54 }, \
{ 10, -48 }, \
{ 30, -36 }, \
{ 60, -24 }, \
{ 90, -12 }, \
{ 120, 0 }, \
{ 241, 64 } \
} }
static struct icom_priv_caps icr9500_priv_caps =
{
0x72, /* default address */
0, /* 731 mode */
0, /* no XCHG */
.ts_sc_list = r9500_ts_sc_list,
.antack_len = 2,
.ant_count = 3
};
/*
* ICR9500A rig capabilities.
*/
const struct rig_caps icr9500_caps =
{
RIG_MODEL(RIG_MODEL_ICR9500),
.model_name = "IC-R9500",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = ICR9500_FUNCS,
.has_set_func = ICR9500_FUNCS,
.has_get_level = ICR9500_LEVELS,
.has_set_level = RIG_LEVEL_SET(ICR9500_LEVELS),
.has_get_parm = ICR9500_PARMS,
.has_set_parm = RIG_PARM_SET(ICR9500_PARMS),
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = { 10, 20, RIG_DBLST_END }, /* FIXME: TBC */
.attenuator = { 6, 10, 12, 18, 20, 24, 30, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR9500_OPS,
.scan_ops = ICR9500_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 12,
.chan_desc_sz = 0, /* FIXME */
.chan_list = {
{ 0, 999, RIG_MTYPE_MEM, ICR9500_MEM_CAP }, /* TBC */
{ 1000, 1099, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-A (Auto) */
{ 1100, 1199, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-S (skip) */
{ 1200, 1219, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-P (Scan edge), 2 by 2 */
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(5), MHz(30) - 1, ICR9500_MODES, -1, -1, ICR9500_VFOS, ICR9500_HF_ANTS},
{MHz(30), MHz(3335), ICR9500_MODES, -1, -1, ICR9500_VFOS, RIG_ANT_4},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(5), MHz(30) - 1, ICR9500_MODES, -1, -1, ICR9500_VFOS, ICR9500_HF_ANTS},
{MHz(30), MHz(3335), ICR9500_MODES, -1, -1, ICR9500_VFOS, RIG_ANT_4},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
.tuning_steps = {
{ICR9500_MODES, 1}, /* resolution */
{ICR9500_MODES, 10},
{ICR9500_MODES, 100},
{ICR9500_MODES, kHz(1)},
{ICR9500_MODES, kHz(2.5)},
{ICR9500_MODES, kHz(5)},
{ICR9500_MODES, kHz(6.25)},
{ICR9500_MODES, kHz(9)},
{ICR9500_MODES, kHz(10)},
{ICR9500_MODES, 12500},
{ICR9500_MODES, kHz(20)},
{ICR9500_MODES, kHz(25)},
{ICR9500_MODES, kHz(100)},
{ICR9500_MODES, MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY, kHz(2.4)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_AM | RIG_MODE_AMS, kHz(6)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_WFM, kHz(350)},
RIG_FLT_END,
},
.str_cal = ICR9500_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& icr9500_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_sql,
.get_dcs_sql = icom_get_dcs_sql,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.set_bank = icom_set_bank,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* Function definitions below
*/