mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/icom/icr30.c

279 wiersze
8.7 KiB
C
Czysty Wina Historia

/*
* Hamlib CI-V backend - description of IC-R30
* Copyright (c) 2018 Malcolm Herring
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
#include "hamlib/rig.h"
#include "token.h"
#include "icom.h"
#include "idx_builtin.h"
#include "icom_defs.h"
#include "frame.h"
#define ICR30_MODES (RIG_MODE_LSB|RIG_MODE_USB|RIG_MODE_AM|RIG_MODE_AMN|\
RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_FM|RIG_MODE_FMN|RIG_MODE_WFM|\
RIG_MODE_RTTYR|RIG_MODE_SAM|RIG_MODE_SAL|RIG_MODE_SAH|RIG_MODE_P25|\
RIG_MODE_DSTAR|RIG_MODE_DPMR|RIG_MODE_NXDNVN|RIG_MODE_NXDN_N|RIG_MODE_DCR)
#define ICR30_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_AFC|RIG_FUNC_VSC|\
RIG_FUNC_CSQL|RIG_FUNC_DSQL|RIG_FUNC_ANL|RIG_FUNC_CSQL|RIG_FUNC_SCEN)
#define ICR30_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_RF|\
RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH)
#define ICR30_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB)
#define ICR30_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ICR30_SCAN_OPS (RIG_SCAN_NONE)
#define TOK_ANL TOKEN_BACKEND(001)
#define TOK_EAR TOKEN_BACKEND(002)
#define TOK_REC TOKEN_BACKEND(003)
int icr30_tokens[] = { TOK_ANL, TOK_EAR, TOK_REC,
TOK_DSTAR_DSQL, TOK_DSTAR_CALL_SIGN, TOK_DSTAR_MESSAGE, TOK_DSTAR_STATUS,
TOK_DSTAR_GPS_DATA, TOK_DSTAR_GPS_MESS, TOK_DSTAR_CODE, TOK_DSTAR_TX_DATA,
TOK_BACKEND_NONE
};
struct confparams icr30_ext[] =
{
{ TOK_ANL, "anl", "Auto noise limiter", "", "", RIG_CONF_CHECKBUTTON, {} },
{ TOK_EAR, "ear", "Earphone mode", "", "", RIG_CONF_CHECKBUTTON, {} },
{ TOK_REC, "record", "Recorder on/off", "", "", RIG_CONF_CHECKBUTTON, {} },
{ 0 }
};
struct cmdparams icr30_extcmds[] =
{
{ {.t = TOK_ANL}, CMD_PARAM_TYPE_TOKEN, C_CTL_MEM, S_MEM_ANL, SC_MOD_RW, 0, {}, CMD_DAT_BOL, 1 },
{ {.t = TOK_EAR}, CMD_PARAM_TYPE_TOKEN, C_CTL_MEM, S_MEM_EAR, SC_MOD_RW, 0, {}, CMD_DAT_BOL, 1 },
{ {.t = TOK_REC}, CMD_PARAM_TYPE_TOKEN, C_CTL_MEM, S_MEM_REC, SC_MOD_WR, 0, {}, CMD_DAT_BOL, 1 },
{ {0} }
};
#define ICR30_STR_CAL { 2, \
{ \
{ 0, -60 }, /* S0 */ \
{ 255, 60 } /* +60 */ \
} }
/*
* This function does the special bandwidth coding for IC-R30
* (1 - normal, 2 - narrow)
*/
static int icr30_r2i_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width,
unsigned char *md, signed char *pd)
{
int err;
err = rig2icom_mode(rig, vfo, mode, width, md, pd);
if (*pd == PD_NARROW_3)
{
*pd = PD_NARROW_2;
}
return err;
}
/*
* This function handles the -N modes for IC-R30
*/
int icr30_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
if (mode & (RIG_MODE_AMN | RIG_MODE_FMN))
{
return icom_set_mode(rig, vfo, mode, (pbwidth_t)1);
}
else
{
return icom_set_mode(rig, vfo, mode, width);
}
}
static struct icom_priv_caps icr30_priv_caps =
{
0x9c, /* default address */
0, /* 731 mode */
0, /* no XCHG */
r8500_ts_sc_list, /* wrong, but don't have set_ts anyway */
.antack_len = 2,
.ant_count = 2,
.r2i_mode = icr30_r2i_mode,
.offs_len = 4,
.extcmds = icr30_extcmds /* Custom ext_parm parameters */
};
const struct rig_caps icr30_caps =
{
RIG_MODEL(RIG_MODEL_ICR30),
.model_name = "IC-R30",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_RECEIVER | RIG_FLAG_HANDHELD,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = ICR30_FUNC_ALL,
.has_set_func = ICR30_FUNC_ALL,
.has_get_level = ICR30_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ICR30_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ext_tokens = icr30_tokens,
.extfuncs = icr30_ext,
.extparms = icom_ext_parms,
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { 15, 30, 35, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR30_VFO_OPS,
.scan_ops = ICR30_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 999, RIG_MTYPE_MEM }, /* TBC */
{ 1000, 1199, RIG_MTYPE_MEM }, /* auto-write */
{ 1200, 1299, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { /* Other countries but France */
{kHz(100), GHz(3.3049999), ICR30_MODES, -1, -1, ICR30_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { /* USA */
{kHz(100), MHz(821.995), ICR30_MODES, -1, -1, ICR30_VFO_ALL},
{MHz(851), MHz(866.995), ICR30_MODES, -1, -1, ICR30_VFO_ALL},
{MHz(896), GHz(3.3049999), ICR30_MODES, -1, -1, ICR30_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{ICR30_MODES, Hz(10)},
{ICR30_MODES, Hz(100)},
{ICR30_MODES, Hz(1000)},
{ICR30_MODES, Hz(3125)},
{ICR30_MODES, Hz(5000)},
{ICR30_MODES, Hz(6250)},
{ICR30_MODES, Hz(8330)},
{ICR30_MODES, Hz(9000)},
{ICR30_MODES, Hz(10000)},
{ICR30_MODES, Hz(12500)},
{ICR30_MODES, kHz(15)},
{ICR30_MODES, kHz(20)},
{ICR30_MODES, kHz(25)},
{ICR30_MODES, kHz(30)},
{ICR30_MODES, kHz(50)},
{ICR30_MODES, kHz(100)},
{ICR30_MODES, kHz(125)},
{ICR30_MODES, kHz(200)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_USB | RIG_MODE_LSB, kHz(1.8)},
{RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_AMN | RIG_MODE_FMN, kHz(12)},
{RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_AMN | RIG_MODE_FMN, kHz(6)},
{RIG_MODE_WFM, kHz(150)},
RIG_FLT_END,
},
.str_cal = ICR30_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.set_powerstat = icom_set_powerstat,
.get_powerstat = icom_get_powerstat,
.priv = (void *)& icr30_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icr30_set_mode,
.get_mode = icom_get_mode,
.vfo_op = icom_vfo_op,
.set_vfo = icom_set_vfo,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.set_bank = icom_set_bank,
.set_mem = icom_set_mem,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_ext_parm = icom_set_ext_parm,
.get_ext_parm = icom_get_ext_parm,
.set_ext_level = icom_set_ext_level,
.get_ext_level = icom_get_ext_level,
.set_ext_func = icom_set_ext_func,
.get_ext_func = icom_get_ext_func,
.get_dcd = icom_get_dcd,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_sql,
.get_dcs_sql = icom_get_dcs_sql,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik