Hamlib/rigs/jrc/nrd525.c

261 wiersze
6.5 KiB
C

/*
* Hamlib JRC backend - NRD-525 description
* Copyright (c) 2001-2009 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h>
#include "hamlib/rig.h"
#include "iofunc.h"
#include "jrc.h"
static int nrd525_open(RIG *rig);
static int nrd525_close(RIG *rig);
static int nrd525_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int nrd525_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
static int nrd525_set_func(RIG *rig, vfo_t vfo, setting_t func, int status);
static int nrd525_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
static int nrd525_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op);
static int nrd525_set_mem(RIG *rig, vfo_t vfo, int ch);
#define NRD525_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_FAX)
#define NRD525_FUNC (RIG_FUNC_LOCK)
#define NRD525_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC)
#define NRD525_VFO (RIG_VFO_VFO)
#define NRD525_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.levels = RIG_LEVEL_ATT|RIG_LEVEL_AGC, \
}
/*
* NRD-525 rig capabilities.
*
*/
const struct rig_caps nrd525_caps =
{
RIG_MODEL(RIG_MODEL_NRD525),
.model_name = "NRD-525",
.mfg_name = "JRC",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 20,
.timeout = 1000,
.retry = 0,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = NRD525_FUNC,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = NRD525_LEVEL,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { 20, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.vfo_ops = RIG_OP_FROM_VFO,
.scan_ops = RIG_SCAN_NONE,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 199, RIG_MTYPE_MEM, NRD525_MEM_CAP },
RIG_CHAN_END
},
.rx_range_list1 = {
{kHz(10), MHz(30), NRD525_MODES, -1, -1, NRD525_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(10), MHz(30), NRD525_MODES, -1, -1, NRD525_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{NRD525_MODES, 10},
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{RIG_MODE_FM, kHz(12)},
{RIG_MODE_FM, kHz(6)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_AM, kHz(2)},
{RIG_MODE_AM, kHz(12)},
{RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_FAX, kHz(2)},
{RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_FAX, kHz(1)},
{RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_FAX, kHz(6)},
{RIG_MODE_CW, kHz(1)},
{RIG_MODE_CW, kHz(2)},
RIG_FLT_END,
},
.rig_open = nrd525_open,
.rig_close = nrd525_close,
.set_freq = nrd525_set_freq,
.set_mode = nrd525_set_mode,
.set_func = nrd525_set_func,
.set_level = nrd525_set_level,
.set_mem = nrd525_set_mem,
.vfo_op = nrd525_vfo_op,
};
/*
* Function definitions below
*/
static int nrd525_open(RIG *rig)
{
return write_block(&rig->state.rigport, "H1", 2);
}
static int nrd525_close(RIG *rig)
{
return write_block(&rig->state.rigport, "H0", 2);
}
static int nrd525_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
char freqbuf[12];
sprintf(freqbuf, "F%08u", (unsigned)(freq / 10));
return write_block(&rig->state.rigport, freqbuf, strlen(freqbuf));
}
static int nrd525_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
int retval;
char *modestr;
switch (mode)
{
case RIG_MODE_RTTY: modestr = "D0"; break;
case RIG_MODE_CW: modestr = "D1"; break;
case RIG_MODE_USB: modestr = "D2"; break;
case RIG_MODE_LSB: modestr = "D3"; break;
case RIG_MODE_AM: modestr = "D4"; break;
case RIG_MODE_FM: modestr = "D5"; break;
case RIG_MODE_FAX: modestr = "D6"; break;
default:
return -RIG_EINVAL;
}
retval = write_block(&rig->state.rigport, modestr, strlen(modestr));
if (retval != RIG_OK)
{
return retval;
}
if (RIG_PASSBAND_NOCHANGE == width) { return retval; }
// TODO: width
return retval;
}
static int nrd525_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
return -RIG_ENIMPL;
}
static int nrd525_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
switch (level)
{
case RIG_LEVEL_ATT:
return write_block(&rig->state.rigport, val.i != 0 ? "A1" : "A0", 2);
case RIG_LEVEL_AGC:
return write_block(&rig->state.rigport,
val.i == RIG_AGC_SLOW ? "G0" :
(val.i == RIG_AGC_FAST ? "G1" : "G2"), 2);
default:
return -RIG_EINVAL;
}
return -RIG_EINVAL;
}
static int nrd525_set_mem(RIG *rig, vfo_t vfo, int ch)
{
char membuf[12];
sprintf(membuf, "C%03d", ch);
return write_block(&rig->state.rigport, membuf, strlen(membuf));
}
static int nrd525_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
{
switch (op)
{
case RIG_OP_FROM_VFO:
return write_block(&rig->state.rigport, "E1", 2);
default:
return -RIG_EINVAL;
}
return -RIG_EINVAL;
}