Hamlib/rigs/rs/eb200.c

180 wiersze
4.7 KiB
C

/*
* Hamlib R&S backend - EB200 description
* Copyright (c) 2009-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
#include <stdlib.h>
#include <hamlib/rig.h>
#include "rs.h"
/* TODO: PULSE and IQ ? */
#define EB200_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define EB200_FUNC (RIG_FUNC_SQL|RIG_FUNC_AFC|RIG_FUNC_LOCK)
#define EB200_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_SQL|RIG_LEVEL_AGC|\
RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)
#define EB200_PARM_ALL (RIG_PARM_NONE)
#define EB200_VFO (RIG_VFO_A)
#define EB200_VFO_OPS (RIG_OP_NONE)
#define EB200_ANTS (RIG_ANT_1)
#define EB200_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.ant = 1, \
.funcs = EB200_FUNC, \
.levels = RIG_LEVEL_SET(EB200_LEVEL_ALL), \
.channel_desc=1, \
.flags = RIG_CHFLAG_SKIP, \
}
/*
* EB200 rig capabilities.
*
* Needs option ESMBR2 for computer operation RS-232C
*
* TODO
* - set/get_channels
* - get_dcd
* - set_ant
*/
const struct rig_caps eb200_caps =
{
RIG_MODEL(RIG_MODEL_EB200),
.model_name = "EB200",
.mfg_name = "Rohde&Schwarz",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300, /* 7E2 */
.serial_rate_max = 115200, /* 7E1, RTS/CTS */
.serial_data_bits = 7,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_EVEN,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = EB200_FUNC,
.has_set_func = EB200_FUNC,
.has_get_level = EB200_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(EB200_LEVEL_ALL),
.has_get_parm = EB200_PARM_ALL,
.has_set_parm = RIG_PARM_SET(EB200_PARM_ALL),
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { 32, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 7, /* FIXME */
.vfo_ops = EB200_VFO_OPS,
.chan_list = {
{ 0, 999, RIG_MTYPE_MEM, EB200_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(10), GHz(3), EB200_MODES, -1, -1, EB200_VFO, EB200_ANTS},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(10), GHz(3), EB200_MODES, -1, -1, EB200_VFO, EB200_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{EB200_MODES, 1},
{EB200_MODES, 10},
{EB200_MODES, 100},
{EB200_MODES, 1000},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_WFM, kHz(150)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(15)},
{EB200_MODES, kHz(2.4)},
{EB200_MODES, kHz(1.5)},
{EB200_MODES, Hz(150)},
{EB200_MODES, Hz(300)},
{EB200_MODES, Hz(600)},
{EB200_MODES, kHz(6)},
{EB200_MODES, kHz(9)},
{EB200_MODES, kHz(15)},
{EB200_MODES, kHz(30)},
{EB200_MODES, kHz(50)},
{EB200_MODES, kHz(120)},
RIG_FLT_END,
},
.priv = NULL,
.set_freq = rs_set_freq,
.get_freq = rs_get_freq,
.set_mode = rs_set_mode,
.get_mode = rs_get_mode,
.set_level = rs_set_level,
.get_level = rs_get_level,
.set_func = rs_set_func,
.get_func = rs_get_func,
.get_info = rs_get_info,
.reset = rs_reset,
#if 0
/* TODO */
.rig_open = rs_rig_open,
.set_channel = rs_set_channel,
.get_channel = rs_get_channel,
#endif
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* Function definitions below
*/