Hamlib/rigs/kenwood/ts480.c

1695 wiersze
50 KiB
C

/*
* Hamlib Kenwood backend - TS-480 description
* Copyright (c) 2000-2004 by Stephane Fillod and Juergen Rinas
* Copyright (c) 2021 by Mikael Nousiainen
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
#include <hamlib/rig.h>
#include "cal.h"
#include "idx_builtin.h"
#include "iofunc.h"
#include "token.h"
#include "kenwood.h"
#define TS480_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define PS8000A_ALL_MODES (RIG_MODE_AM|RIG_MODE_AMS|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define TS480_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS480_AM_TX_MODES RIG_MODE_AM
#define TS480_VFO (RIG_VFO_A|RIG_VFO_B)
#define TS480_LEVEL_ALL (RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|RIG_LEVEL_AGC|RIG_LEVEL_MICGAIN|RIG_LEVEL_STRENGTH|RIG_LEVEL_KEYSPD|RIG_LEVEL_CWPITCH| \
RIG_LEVEL_MONITOR_GAIN|RIG_LEVEL_NB|RIG_LEVEL_NR|RIG_LEVEL_PREAMP|RIG_LEVEL_COMP|RIG_LEVEL_ATT|RIG_LEVEL_VOXDELAY|RIG_LEVEL_VOXGAIN|RIG_LEVEL_BKIN_DLYMS| \
RIG_LEVEL_METER|RIG_LEVEL_SWR|RIG_LEVEL_COMP_METER|RIG_LEVEL_ALC|RIG_LEVEL_RFPOWER_METER|RIG_LEVEL_SLOPE_HIGH|RIG_LEVEL_SLOPE_LOW)
#define TS480_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_NR|RIG_FUNC_NR|RIG_FUNC_BC|RIG_FUNC_BC2|RIG_FUNC_RIT|RIG_FUNC_XIT| \
RIG_FUNC_TUNER|RIG_FUNC_MON|RIG_FUNC_FBKIN|RIG_FUNC_LOCK)
#define TS480_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN|RIG_OP_BAND_UP|RIG_OP_BAND_DOWN|RIG_OP_CPY|RIG_OP_TUNE)
// TS-480 S-meter calibration table based on LCD display bars
#define TS480_STR_CAL { 9, \
{ \
{ 0, -60 }, \
{ 3, -48 }, \
{ 5, -36 }, \
{ 7, -24 }, \
{ 9, -12 }, \
{ 11, 0 }, \
{ 14, 20 }, \
{ 17, 40 }, \
{ 20, 60 } \
} }
// TS-480 SWR calibration table based approximately on LCD display bars
#define TS480_SWR_CAL { 5, \
{ \
{ 0, 1.0f }, \
{ 4, 1.5f }, \
{ 8, 2.0f }, \
{ 12, 3.0f }, \
{ 20, 10.0f } \
} }
#define TOK_FUNC_NOISE_REDUCTION_2 TOKEN_BACKEND(102)
#define TOK_FUNC_TX_AUDIO_FROM_DATA_INPUT TOKEN_BACKEND(103)
#define TOK_LEVEL_DSP_RX_EQUALIZER TOKEN_BACKEND(104)
#define TOK_LEVEL_DSP_TX_EQUALIZER TOKEN_BACKEND(105)
#define TOK_LEVEL_DSP_TX_BANDWIDTH TOKEN_BACKEND(106)
#define TOK_LEVEL_BEEP_VOLUME TOKEN_BACKEND(107)
#define TOK_LEVEL_TX_SIDETONE_VOLUME TOKEN_BACKEND(108)
#define TOK_LEVEL_AF_INPUT_LEVEL TOKEN_BACKEND(109)
#define TOK_LEVEL_AF_OUTPUT_LEVEL TOKEN_BACKEND(110)
#define TOK_LEVEL_DIGITAL_NOISE_LIMITER TOKEN_BACKEND(111)
#define TOK_FUNC_CW_IF_FOR_SSB_RX TOKEN_BACKEND(112)
int ts480_ext_tokens[] =
{
TOK_FUNC_NOISE_REDUCTION_2, TOK_FUNC_FILTER_WIDTH_DATA, TOK_FUNC_TX_AUDIO_FROM_DATA_INPUT,
TOK_LEVEL_DSP_RX_EQUALIZER, TOK_LEVEL_DSP_TX_EQUALIZER, TOK_LEVEL_DSP_TX_BANDWIDTH,
TOK_LEVEL_BEEP_VOLUME, TOK_LEVEL_TX_SIDETONE_VOLUME,
TOK_LEVEL_AF_INPUT_LEVEL, TOK_LEVEL_AF_OUTPUT_LEVEL,
TOK_LEVEL_DIGITAL_NOISE_LIMITER, TOK_FUNC_CW_IF_FOR_SSB_RX,
TOK_BACKEND_NONE,
};
const struct confparams ts480_ext_funcs[] =
{
{
TOK_FUNC_NOISE_REDUCTION_2, "NR2", "Noise reduction 2", "Noise reduction 2",
NULL, RIG_CONF_CHECKBUTTON,
},
{
TOK_FUNC_CW_IF_FOR_SSB_RX, "CW_IF_FOR_SSB_RX", "CW IF filter for SSB", "Use CW IF filter for SSB reception",
NULL, RIG_CONF_CHECKBUTTON,
},
{
TOK_FUNC_FILTER_WIDTH_DATA, "FILTER_WIDTH_DATA", "Filter bandwidth for data", "Filter bandwidth for data communications",
NULL, RIG_CONF_CHECKBUTTON,
},
{
TOK_FUNC_TX_AUDIO_FROM_DATA_INPUT, "TX_AUDIO_FROM_DATA_INPUT", "TX audio from data input", "Transmit with audio input from the data terminal",
NULL, RIG_CONF_CHECKBUTTON,
},
{ RIG_CONF_END, NULL, }
};
const struct confparams ts480_ext_levels[] =
{
{
TOK_LEVEL_DIGITAL_NOISE_LIMITER, "DIGITAL_NOISE_LIMITER", "Digital Noise Limiter", "Digital Noise Limiter",
NULL, RIG_CONF_COMBO, { .c = { .combostr = { "OFF", "DNL Level 1", "DNL Level 2", "DNL Level 3", NULL } } }
},
{
TOK_LEVEL_DSP_RX_EQUALIZER, "DSP_RX_EQUALIZER", "DSP RX equalizer", "DSP RX equalizer type",
NULL, RIG_CONF_COMBO, { .c = { .combostr = { "OFF", "Hb1", "Hb2", "FP", "bb1", "bb2", "c", "U", NULL } } }
},
{
TOK_LEVEL_DSP_TX_EQUALIZER, "DSP_TX_EQUALIZER", "DSP TX equalizer", "DSP TX equalizer type",
NULL, RIG_CONF_COMBO, { .c = { .combostr = { "OFF", "Hb1", "Hb2", "FP", "bb1", "bb2", "c", "U", NULL } } }
},
{
TOK_LEVEL_DSP_TX_BANDWIDTH, "DSP_TX_BANDWIDTH", "DSP TX bandwidth", "DSP TX bandwidth for SSB and AM",
NULL, RIG_CONF_COMBO, { .c = { .combostr = { "2.0 kHz", "2.4 kHz", NULL } } }
},
{
TOK_LEVEL_BEEP_VOLUME, "BEEP_VOLUME", "Beep volume", "Beep volume",
NULL, RIG_CONF_NUMERIC, { .n = { .min = 0, .max = 9, .step = 1 } }
},
{
TOK_LEVEL_TX_SIDETONE_VOLUME, "TX_SIDETONE_VOLUME", "TX sidetone volume", "TX sidetone volume",
NULL, RIG_CONF_NUMERIC, { .n = { .min = 0, .max = 9, .step = 1 } }
},
{
TOK_LEVEL_AF_INPUT_LEVEL, "AF_INPUT_LEVEL", "AF input level", "AF input level for data communications",
NULL, RIG_CONF_NUMERIC, { .n = { .min = 0, .max = 9, .step = 1 } }
},
{
TOK_LEVEL_AF_OUTPUT_LEVEL, "AF_OUTPUT_LEVEL", "AF output level", "AF output level for data communications",
NULL, RIG_CONF_NUMERIC, { .n = { .min = 0, .max = 9, .step = 1 } }
},
{ RIG_CONF_END, NULL, }
};
/*
* kenwood_ts480_get_info
* Assumes rig!=NULL
*/
const char *
kenwood_ts480_get_info(RIG *rig)
{
char firmbuf[50];
int retval;
size_t firm_len;
retval = kenwood_transaction(rig, "TY", firmbuf, sizeof(firmbuf));
if (retval != RIG_OK)
{
return NULL;
}
firm_len = strlen(firmbuf);
if (firm_len != 5)
{
rig_debug(RIG_DEBUG_ERR, "%s: wrong answer len=%d\n", __func__, (int)firm_len);
return NULL;
}
switch (firmbuf[4])
{
case '0':
return "TS-480HX (200W)";
case '1':
return "TS-480SAT (100W + AT)";
case '2':
return "Japanese 50W type";
case '3':
return "Japanese 20W type";
default:
return "Firmware: unknown";
}
}
static int ts480_set_ex_menu(RIG *rig, int number, int value_len, int value)
{
char buf[20];
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
SNPRINTF(buf, sizeof(buf), "EX%03d0000%0*d", number, value_len, value);
RETURNFUNC(kenwood_transaction(rig, buf, NULL, 0));
}
static int ts480_get_ex_menu(RIG *rig, int number, int value_len, int *value)
{
int retval;
char buf[20];
char ackbuf[20];
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
SNPRINTF(buf, sizeof(buf), "EX%03d0000", number);
retval = kenwood_safe_transaction(rig, buf, ackbuf, sizeof(ackbuf),
9 + value_len);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf + 9, "%d", value);
RETURNFUNC(RIG_OK);
}
static int ts480_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
char buf[20];
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
switch (func)
{
case RIG_FUNC_MON:
SNPRINTF(buf, sizeof(buf), "ML00%c", (status == 0) ? '0' : '1');
RETURNFUNC(kenwood_transaction(rig, buf, NULL, 0));
case RIG_FUNC_LOCK:
SNPRINTF(buf, sizeof(buf), "LK%c%c", (status == 0) ? '0' : '1',
(status == 0) ? '0' : '1');
RETURNFUNC(kenwood_transaction(rig, buf, NULL, 0));
default:
return kenwood_set_func(rig, vfo, func, status);
}
}
static int ts480_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
{
char buf[20];
int retval;
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
switch (func)
{
case RIG_FUNC_MON:
{
int raw_value;
retval = kenwood_safe_transaction(rig, "ML", buf, sizeof(buf), 5);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(buf, "ML%d", &raw_value);
*status = (raw_value > 0);
break;
}
case RIG_FUNC_LOCK:
retval = kenwood_safe_transaction(rig, "LK", buf, sizeof(buf), 4);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
*status = buf[2] != '0' || buf[3] != '0';
break;
default:
return kenwood_get_func(rig, vfo, func, status);
}
RETURNFUNC(RIG_OK);
}
/*
* WARNING: The commands differ slightly from the general versions in kenwood.c
* e.g.: "SQ"=>"SQ0" , "AG"=>"AG0"
*/
int kenwood_ts480_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
char levelbuf[16];
int kenwood_val;
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_RF:
kenwood_val = val.f * 100;
SNPRINTF(levelbuf, sizeof(levelbuf), "RG%03d", kenwood_val);
break;
case RIG_LEVEL_AF:
return kenwood_set_level(rig, vfo, level, val);
case RIG_LEVEL_SQL:
kenwood_val = val.f * 255;
SNPRINTF(levelbuf, sizeof(levelbuf), "SQ0%03d", kenwood_val);
break;
case RIG_LEVEL_AGC:
/* hamlib argument is int, possible values rig.h:enum agc_level_e */
/* possible values for TS480 000(=off), 001(=fast), 002(=slow) */
rig_debug(RIG_DEBUG_VERBOSE, "%s TS480 RIG_LEVEL_AGC\n", __func__);
switch (val.i)
{
case RIG_AGC_OFF:
kenwood_val = 0;
break;
case RIG_AGC_FAST:
kenwood_val = 1;
break;
case RIG_AGC_SLOW:
kenwood_val = 2;
break;
default:
rig_debug(RIG_DEBUG_ERR, "%s: unsupported agc value", __func__);
return -RIG_EINVAL;
}
SNPRINTF(levelbuf, sizeof(levelbuf), "GT%03d", kenwood_val);
break;
case RIG_LEVEL_MONITOR_GAIN:
kenwood_val = val.f * 9.0;
SNPRINTF(levelbuf, sizeof(levelbuf), "ML%03d", kenwood_val);
break;
case RIG_LEVEL_NB:
kenwood_val = val.f * 10.0;
SNPRINTF(levelbuf, sizeof(levelbuf), "NL%03d", kenwood_val);
break;
case RIG_LEVEL_NR:
kenwood_val = val.f * 9.0;
SNPRINTF(levelbuf, sizeof(levelbuf), "RL%02d", kenwood_val);
break;
case RIG_LEVEL_PREAMP:
if (val.i != 12 && val.i != 0)
{
RETURNFUNC(-RIG_EINVAL);
}
SNPRINTF(levelbuf, sizeof(levelbuf), "PA%c", (val.i == 12) ? '1' : '0');
break;
case RIG_LEVEL_ATT:
if (val.i != 12 && val.i != 0)
{
RETURNFUNC(-RIG_EINVAL);
}
SNPRINTF(levelbuf, sizeof(levelbuf), "RA%02d", (val.i == 12) ? 1 : 0);
break;
case RIG_LEVEL_METER:
switch (val.i)
{
case RIG_METER_SWR:
kenwood_val = 1;
break;
case RIG_METER_COMP:
kenwood_val = 2;
break;
case RIG_METER_ALC:
kenwood_val = 3;
break;
default:
RETURNFUNC(-RIG_EINVAL);
}
SNPRINTF(levelbuf, sizeof(levelbuf), "RM%d", kenwood_val);
break;
case RIG_LEVEL_CWPITCH:
if (val.i > 1000 || val.i < 400)
{
RETURNFUNC(-RIG_EINVAL);
}
RETURNFUNC(ts480_set_ex_menu(rig, 34, 2, (val.i - 400) / 50));
default:
return kenwood_set_level(rig, vfo, level, val);
}
return kenwood_transaction(rig, levelbuf, NULL, 0);
}
static int ts480_read_meters(RIG *rig, int *swr, int *comp, int *alc)
{
int retval;
char *cmd = "RM;";
struct rig_state *rs = &rig->state;
char ackbuf[32];
int expected_len = 24;
rig_debug(RIG_DEBUG_TRACE, "%s: called\n", __func__);
retval = write_block(&rs->rigport, (unsigned char *) cmd, strlen(cmd));
rig_debug(RIG_DEBUG_TRACE, "%s: write_block retval=%d\n", __func__, retval);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
// TS-480 returns values for all meters at the same time, for example: RM10000;RM20000;RM30000;
retval = read_string(&rs->rigport, (unsigned char *) ackbuf, expected_len + 1, NULL, 0, 0, 1);
rig_debug(RIG_DEBUG_TRACE, "%s: read_string retval=%d\n", __func__, retval);
if (retval < 0)
{
rig_debug(RIG_DEBUG_ERR, "%s: failed to read rig response\n", __func__);
RETURNFUNC(retval);
}
if (retval != expected_len)
{
rig_debug(RIG_DEBUG_ERR, "%s: expected %d bytes, got %d in '%s'\n", __func__,
expected_len, retval, ackbuf);
RETURNFUNC(-RIG_EPROTO);
}
retval = sscanf(ackbuf, "RM1%d;RM2%d;RM3%d;", swr, comp, alc);
if (retval != 3)
{
rig_debug(RIG_DEBUG_ERR,
"%s: expected 3 meter values to parse, got %d in '%s'\n", __func__, retval,
ackbuf);
RETURNFUNC(-RIG_EPROTO);
}
RETURNFUNC(RIG_OK);
}
/*
* kenwood_ts480_get_level
* Assumes rig!=NULL, val!=NULL
*/
int
kenwood_ts480_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
char ackbuf[50];
size_t ack_len, ack_len_expected;
int levelint;
int retval;
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_AF:
return kenwood_get_level(rig, vfo, level, val);
case RIG_LEVEL_RF:
retval = kenwood_transaction(rig, "RG", ackbuf, sizeof(ackbuf));
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (5 != ack_len)
{
return -RIG_EPROTO;
}
if (1 != sscanf(&ackbuf[2], "%d", &levelint))
{
return -RIG_EPROTO;
}
val->f = levelint / (float) 100;
return RIG_OK;
case RIG_LEVEL_SQL:
retval = kenwood_transaction(rig, "SQ0", ackbuf, sizeof(ackbuf));
ack_len_expected = 6;
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (ack_len != ack_len_expected)
{
return -RIG_EPROTO;
}
if (1 != sscanf(&ackbuf[ack_len_expected - 3], "%d", &levelint))
{
return -RIG_EPROTO;
}
val->f = (float) levelint / 255.;
return RIG_OK;
case RIG_LEVEL_AGC:
retval = kenwood_transaction(rig, "GT", ackbuf, sizeof(ackbuf));
ack_len_expected = 5;
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (ack_len != ack_len_expected)
{
return -RIG_EPROTO;
}
switch (ackbuf[ack_len_expected - 1])
{
case '0':
val->i = RIG_AGC_OFF;
break;
case '1':
val->i = RIG_AGC_FAST;
break;
case '2':
val->i = RIG_AGC_SLOW;
break;
default:
return -RIG_EPROTO;
}
return RIG_OK;
case RIG_LEVEL_STRENGTH:
if (rig->state.cache.ptt != RIG_PTT_OFF)
{
val->i = -9 * 6;
break;
}
return kenwood_get_level(rig, vfo, level, val);
case RIG_LEVEL_MONITOR_GAIN:
{
int raw_value;
retval = kenwood_safe_transaction(rig, "ML", ackbuf, sizeof(ackbuf), 5);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf, "ML%d", &raw_value);
val->f = (float) raw_value / 9.0f;
break;
}
case RIG_LEVEL_NB:
{
int raw_value;
retval = kenwood_safe_transaction(rig, "NL", ackbuf, sizeof(ackbuf), 5);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf, "NL%d", &raw_value);
val->f = (float) raw_value / 10.0f;
break;
}
case RIG_LEVEL_NR:
{
int raw_value;
retval = kenwood_safe_transaction(rig, "RL", ackbuf, sizeof(ackbuf), 4);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf, "RL%d", &raw_value);
val->f = (float) raw_value / 9.0f;
break;
}
case RIG_LEVEL_PREAMP:
retval = kenwood_safe_transaction(rig, "PA", ackbuf, sizeof(ackbuf), 4);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
val->i = ackbuf[2] == '1' ? 12 : 0;
break;
case RIG_LEVEL_ATT:
retval = kenwood_safe_transaction(rig, "RA", ackbuf, sizeof(ackbuf), 6);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
val->i = ackbuf[3] == '1' ? 12 : 0;
break;
case RIG_LEVEL_METER:
{
int raw_value;
// TODO: Read all meters at the same time: RM10000;RM20000;RM30000;
retval = kenwood_safe_transaction(rig, "RM", ackbuf, sizeof(ackbuf), 7);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf, "RM%1d", &raw_value);
switch (raw_value)
{
case 1:
val->i = RIG_METER_SWR;
break;
case 2:
val->i = RIG_METER_COMP;
break;
case 3:
val->i = RIG_METER_ALC;
break;
default:
val->i = RIG_METER_NONE;
}
break;
}
case RIG_LEVEL_SWR:
case RIG_LEVEL_COMP_METER:
case RIG_LEVEL_ALC:
{
int swr;
int comp;
int alc;
retval = ts480_read_meters(rig, &swr, &comp, &alc);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
switch (level)
{
case RIG_LEVEL_SWR:
if (rig->caps->swr_cal.size)
{
val->f = rig_raw2val_float(swr, &rig->caps->swr_cal);
}
else
{
val->f = (float) swr / 2.0f;
}
break;
case RIG_LEVEL_COMP_METER:
val->f = (float) comp; // Maximum value is 20dB
break;
case RIG_LEVEL_ALC:
// Maximum value is 20, so have the max at 5 just to be on the range where other rigs report ALC
val->f = (float) alc / 4.0f;
break;
default:
return -RIG_ENAVAIL;
}
break;
}
case RIG_LEVEL_RFPOWER_METER:
{
int raw_value;
if (rig->state.cache.ptt == RIG_PTT_OFF)
{
val->f = 0;
break;
}
retval = kenwood_safe_transaction(rig, "SM0", ackbuf, sizeof(ackbuf), 7);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf, "SM0%d", &raw_value);
val->f = (float) raw_value / 20.0f;
break;
}
case RIG_LEVEL_CWPITCH:
{
int raw_value;
retval = ts480_get_ex_menu(rig, 34, 2, &raw_value);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
val->i = 400 + raw_value * 50;
break;
}
default:
return kenwood_get_level(rig, vfo, level, val);
}
RETURNFUNC(RIG_OK);
}
static int ts480_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
{
char buf[20];
int retval;
int rit_enabled;
int xit_enabled;
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
if (rit < -9999 || rit > 9999)
{
RETURNFUNC(-RIG_EINVAL);
}
// RC clear command cannot be executed if RIT/XIT is not enabled
retval = kenwood_get_func(rig, vfo, RIG_FUNC_RIT, &rit_enabled);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
if (!rit_enabled)
{
retval = kenwood_get_func(rig, vfo, RIG_FUNC_XIT, &xit_enabled);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
}
if (!rit_enabled && !xit_enabled)
{
retval = kenwood_set_func(rig, vfo, RIG_FUNC_RIT, 1);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
}
retval = kenwood_transaction(rig, "RC", NULL, 0);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
if (!rit_enabled && !xit_enabled)
{
retval = kenwood_set_func(rig, vfo, RIG_FUNC_RIT, 0);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
}
if (rit == 0)
{
RETURNFUNC(RIG_OK);
}
SNPRINTF(buf, sizeof(buf), "R%c%05d", (rit > 0) ? 'U' : 'D', abs((int) rit));
retval = kenwood_transaction(rig, buf, NULL, 0);
RETURNFUNC(retval);
}
static int ts480_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit)
{
int retval;
char buf[7];
struct kenwood_priv_data *priv = rig->state.priv;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rit)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = kenwood_get_if(rig);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
memcpy(buf, &priv->info[18], 5);
buf[6] = '\0';
*rit = atoi(buf);
RETURNFUNC(RIG_OK);
}
static int ts480_set_ext_func(RIG *rig, vfo_t vfo, token_t token, int status)
{
char cmdbuf[20];
int retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (token)
{
case TOK_FUNC_NOISE_REDUCTION_2:
if (status < 0 || status > 1)
{
RETURNFUNC(-RIG_EINVAL);
}
SNPRINTF(cmdbuf, sizeof(cmdbuf), "NR%d", status ? 2 : 0);
retval = kenwood_transaction(rig, cmdbuf, NULL, 0);
break;
case TOK_FUNC_CW_IF_FOR_SSB_RX:
if (status < 0 || status > 1)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 17, 1, status);
break;
case TOK_FUNC_FILTER_WIDTH_DATA:
if (status < 0 || status > 1)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 45, 1, status);
break;
case TOK_FUNC_TX_AUDIO_FROM_DATA_INPUT:
if (status < 0 || status > 1)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 60, 1, status);
break;
default:
RETURNFUNC(-RIG_EINVAL);
}
RETURNFUNC(retval);
}
static int ts480_get_ext_func(RIG *rig, vfo_t vfo, token_t token, int *status)
{
char ackbuf[20];
int retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (token)
{
case TOK_FUNC_NOISE_REDUCTION_2:
{
int value;
retval = kenwood_safe_transaction(rig, "NR", ackbuf, sizeof(ackbuf), 3);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf, "NR%d", &value);
*status = (value == 2) ? 1 : 0;
break;
}
case TOK_FUNC_CW_IF_FOR_SSB_RX:
retval = ts480_get_ex_menu(rig, 17, 1, status);
break;
case TOK_FUNC_FILTER_WIDTH_DATA:
retval = ts480_get_ex_menu(rig, 45, 1, status);
break;
case TOK_FUNC_TX_AUDIO_FROM_DATA_INPUT:
retval = ts480_get_ex_menu(rig, 60, 1, status);
break;
default:
RETURNFUNC(-RIG_EINVAL);
}
RETURNFUNC(retval);
}
static int ts480_set_ext_level(RIG *rig, vfo_t vfo, token_t token, value_t val)
{
int retval;
char cmdbuf[20];
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (token)
{
case TOK_LEVEL_DIGITAL_NOISE_LIMITER:
if (val.i < 0 || val.i > 3)
{
RETURNFUNC(-RIG_EINVAL);
}
SNPRINTF(cmdbuf, sizeof(cmdbuf), "DL%d%02d", val.i != 0 ? 1 : 0,
val.i > 0 ? val.i - 1 : 0);
retval = kenwood_transaction(rig, cmdbuf, NULL, 0);
break;
case TOK_LEVEL_DSP_RX_EQUALIZER:
if (val.i < 0 || val.i > 7)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 18, 1, val.i);
break;
case TOK_LEVEL_DSP_TX_EQUALIZER:
if (val.i < 0 || val.i > 7)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 19, 1, val.i);
break;
case TOK_LEVEL_DSP_TX_BANDWIDTH:
if (val.i < 0 || val.i > 1)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 20, 1, val.i);
break;
case TOK_LEVEL_BEEP_VOLUME:
if (val.f < 0 || val.f > 9)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 12, 1, (int) val.f);
break;
case TOK_LEVEL_TX_SIDETONE_VOLUME:
if (val.f < 0 || val.f > 9)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 13, 1, (int) val.f);
break;
case TOK_LEVEL_AF_INPUT_LEVEL:
if (val.f < 0 || val.f > 9)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 46, 1, (int) val.f);
break;
case TOK_LEVEL_AF_OUTPUT_LEVEL:
if (val.f < 0 || val.f > 9)
{
RETURNFUNC(-RIG_EINVAL);
}
retval = ts480_set_ex_menu(rig, 47, 1, (int) val.f);
break;
default:
RETURNFUNC(-RIG_EINVAL);
}
RETURNFUNC(retval);
}
static int ts480_get_ext_level(RIG *rig, vfo_t vfo, token_t token, value_t *val)
{
char ackbuf[20];
int retval;
int value;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (token)
{
case TOK_LEVEL_DIGITAL_NOISE_LIMITER:
{
int enabled;
int level;
retval = kenwood_safe_transaction(rig, "DL", ackbuf, sizeof(ackbuf), 5);
if (retval != RIG_OK)
{
RETURNFUNC(retval);
}
sscanf(ackbuf, "DL%1d%2d", &enabled, &level);
val->i = enabled ? level + 1 : 0;
break;
}
case TOK_LEVEL_DSP_RX_EQUALIZER:
retval = ts480_get_ex_menu(rig, 18, 1, &value);
val->i = value;
break;
case TOK_LEVEL_DSP_TX_EQUALIZER:
retval = ts480_get_ex_menu(rig, 19, 1, &value);
val->i = value;
break;
case TOK_LEVEL_DSP_TX_BANDWIDTH:
retval = ts480_get_ex_menu(rig, 20, 1, &value);
val->i = value;
break;
case TOK_LEVEL_BEEP_VOLUME:
retval = ts480_get_ex_menu(rig, 12, 1, &value);
val->f = value;
break;
case TOK_LEVEL_TX_SIDETONE_VOLUME:
retval = ts480_get_ex_menu(rig, 13, 1, &value);
val->f = value;
break;
case TOK_LEVEL_AF_INPUT_LEVEL:
retval = ts480_get_ex_menu(rig, 46, 1, &value);
val->f = value;
break;
case TOK_LEVEL_AF_OUTPUT_LEVEL:
retval = ts480_get_ex_menu(rig, 47, 1, &value);
val->f = value;
break;
default:
RETURNFUNC(-RIG_EINVAL);
}
RETURNFUNC(retval);
}
static struct kenwood_filter_width ts480_filter_width[] =
{
{ RIG_MODE_CW | RIG_MODE_CWR, 50, 50 },
{ RIG_MODE_CW | RIG_MODE_CWR, 80, 80 },
{ RIG_MODE_CW | RIG_MODE_CWR, 100, 100 },
{ RIG_MODE_CW | RIG_MODE_CWR, 150, 150 },
{ RIG_MODE_CW | RIG_MODE_CWR, 200, 200 },
{ RIG_MODE_CW | RIG_MODE_CWR, 300, 300 },
{ RIG_MODE_CW | RIG_MODE_CWR, 400, 400 },
{ RIG_MODE_CW | RIG_MODE_CWR, 500, 500 },
{ RIG_MODE_CW | RIG_MODE_CWR, 600, 600 },
{ RIG_MODE_CW | RIG_MODE_CWR, 1000, 1000 },
{ RIG_MODE_CW | RIG_MODE_CWR, 2000, 2000 },
{ RIG_MODE_RTTY | RIG_MODE_RTTYR, 250, 250 },
{ RIG_MODE_RTTY | RIG_MODE_RTTYR, 500, 500 },
{ RIG_MODE_RTTY | RIG_MODE_RTTYR, 1000, 1000 },
{ RIG_MODE_RTTY | RIG_MODE_RTTYR, 1500, 1500 },
{ RIG_MODE_SSB, 0, 2400 },
{ RIG_MODE_SSB, 1, 500 }, // NAR1 optional filter
{ RIG_MODE_SSB, 2, 270 }, // NAR2 optional filter
{ RIG_MODE_FM, 0, 12000 },
{ RIG_MODE_AM, 0, 6000 },
{ RIG_MODE_AM, 1, 2400 }, // NAR1 optional filter (?)
{ RIG_MODE_NONE, -1, -1 },
};
static struct kenwood_slope_filter ts480_slope_filter_high[] =
{
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 0, 1000 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 1, 1200 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 2, 1400 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 3, 1600 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 4, 1800 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 5, 2000 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 6, 2200 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 7, 2400 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 8, 2600 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 9, 2800 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 10, 3000 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 11, 3400 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 12, 4000 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 13, 5000 },
{ RIG_MODE_AM, 0, 0, 2500 },
{ RIG_MODE_AM, 0, 1, 3000 },
{ RIG_MODE_AM, 0, 2, 4000 },
{ RIG_MODE_AM, 0, 3, 5000 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 0, 1000 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 1, 1500 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 2, 2210 },
{ RIG_MODE_NONE, 0, -1, -1 },
};
static struct kenwood_slope_filter ts480_slope_filter_low[] =
{
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 0, 0 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 1, 50 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 2, 100 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 3, 200 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 4, 300 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 5, 400 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 6, 500 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 7, 600 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 8, 700 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 9, 800 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 0, 10, 900 },
{ RIG_MODE_SSB | RIG_MODE_FM | RIG_MODE_RTTY | RIG_MODE_RTTYR, 10, 1, 1000 },
{ RIG_MODE_AM, 0, 0, 0 },
{ RIG_MODE_AM, 0, 1, 100 },
{ RIG_MODE_AM, 0, 2, 200 },
{ RIG_MODE_AM, 0, 3, 500 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 0, 50 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 1, 100 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 2, 250 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 3, 500 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 4, 1000 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 5, 1500 },
{ RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_FM | RIG_MODE_AM, 1, 6, 2400 },
{ RIG_MODE_NONE, 0, -1, -1 },
};
static struct kenwood_priv_caps ts480_priv_caps =
{
.cmdtrm = EOM_KEN,
.filter_width = ts480_filter_width,
.slope_filter_high = ts480_slope_filter_high,
.slope_filter_low = ts480_slope_filter_low,
};
int ts480_init(RIG *rig)
{
struct kenwood_priv_data *priv;
int retval;
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
retval = kenwood_init(rig);
if (retval != RIG_OK)
{
return retval;
}
priv = (struct kenwood_priv_data *) rig->state.priv;
priv->ag_format = 2;
priv->micgain_min = 0;
priv->micgain_max = 100;
RETURNFUNC(RIG_OK);
}
/*
* TS-480 rig capabilities
* Notice that some rigs share the same functions.
*/
const struct rig_caps ts480_caps =
{
RIG_MODEL(RIG_MODEL_TS480),
.model_name = "TS-480",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG_MICDATA,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 115200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.preamp = {12, RIG_DBLST_END,},
.attenuator = {12, RIG_DBLST_END,},
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.rx_range_list1 = {
{kHz(100), Hz(59999999), TS480_ALL_MODES, -1, -1, TS480_VFO},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 1 */
.tx_range_list1 = {
{kHz(1810), kHz(1850), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO}, /* 100W class */
{kHz(1810), kHz(1850), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO}, /* 25W class */
{kHz(3500), kHz(3800), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(3500), kHz(3800), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(7), kHz(7200), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(7), kHz(7200), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{kHz(10100), kHz(10150), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(10100), kHz(10150), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(14), kHz(14350), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(14), kHz(14350), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{kHz(18068), kHz(18168), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(18068), kHz(18168), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(21), kHz(21450), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(21), kHz(21450), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{kHz(24890), kHz(24990), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(24890), kHz(24990), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(28), kHz(29700), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(28), kHz(29700), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(50), kHz(52000), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(50), kHz(52000), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 1 */
.rx_range_list2 = {
{kHz(100), Hz(59999999), TS480_ALL_MODES, -1, -1, TS480_VFO},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 2 */
.tx_range_list2 = {
{kHz(1800), MHz(2) - 1, TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO}, /* 100W class */
{kHz(1800), MHz(2) - 1, TS480_AM_TX_MODES, 5000, 25000, TS480_VFO}, /* 25W class */
{kHz(3500), MHz(4) - 1, TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(3500), MHz(4) - 1, TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{kHz(5250), kHz(5450), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(5250), kHz(5450), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(7), kHz(7300), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(7), kHz(7300), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{kHz(10100), kHz(10150), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(10100), kHz(10150), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(14), kHz(14350), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(14), kHz(14350), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{kHz(18068), kHz(18168), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(18068), kHz(18168), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(21), kHz(21450), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(21), kHz(21450), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{kHz(24890), kHz(24990), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{kHz(24890), kHz(24990), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(28), kHz(29700), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(28), kHz(29700), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
{MHz(50), kHz(52000), TS480_OTHER_TX_MODES, 5000, 100000, TS480_VFO},
{MHz(50), kHz(52000), TS480_AM_TX_MODES, 5000, 25000, TS480_VFO},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 2 */
.tuning_steps = {
{TS480_ALL_MODES, kHz(1)},
{TS480_ALL_MODES, Hz(2500)},
{TS480_ALL_MODES, kHz(5)},
{TS480_ALL_MODES, Hz(6250)},
{TS480_ALL_MODES, kHz(10)},
{TS480_ALL_MODES, Hz(12500)},
{TS480_ALL_MODES, kHz(15)},
{TS480_ALL_MODES, kHz(20)},
{TS480_ALL_MODES, kHz(25)},
{TS480_ALL_MODES, kHz(30)},
{TS480_ALL_MODES, kHz(100)},
{TS480_ALL_MODES, kHz(500)},
{TS480_ALL_MODES, MHz(1)},
{TS480_ALL_MODES, 0}, /* any tuning step */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_SSB, Hz(270)},
{RIG_MODE_SSB, Hz(500)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(200)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(50)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(1000)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(80)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(100)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(150)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(300)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(400)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(500)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(600)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(2000)},
{RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(500)},
{RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(250)},
{RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(1000)},
{RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(1500)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.vfo_ops = TS480_VFO_OPS,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 30 }, .step = { .i = 1 } },
[LVL_KEYSPD] = {.min = {.i = 10}, .max = {.i = 60}, .step = {.i = 1}},
[LVL_CWPITCH] = {.min = {.i = 400}, .max = {.i = 1000}, .step = {.i = 50}},
[LVL_BKIN_DLYMS] = {.min = {.i = 0}, .max = {.i = 1000}, .step = {.i = 50}},
[LVL_SLOPE_LOW] = {.min = {.i = 0}, .max = {.i = 2400}, .step = {.i = 10}},
[LVL_SLOPE_HIGH] = {.min = {.i = 0}, .max = {.i = 5000}, .step = {.i = 10}},
},
.str_cal = TS480_STR_CAL,
.swr_cal = TS480_SWR_CAL,
.ext_tokens = ts480_ext_tokens,
.extfuncs = ts480_ext_funcs,
.extlevels = ts480_ext_levels,
.priv = (void *)& ts480_priv_caps,
.rig_init = ts480_init,
.rig_open = kenwood_open,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = ts480_set_rit,
.get_rit = ts480_get_rit,
.set_xit = ts480_set_rit,
.get_xit = ts480_get_rit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_split_vfo = kenwood_set_split_vfo,
.get_split_vfo = kenwood_get_split_vfo_if,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.get_info = kenwood_ts480_get_info,
.reset = kenwood_reset,
.set_ant = kenwood_set_ant,
.get_ant = kenwood_get_ant,
.scan = kenwood_scan, /* not working, invalid arguments using rigctl; kenwood_scan does only support on/off and not tone and CTCSS scan */
.has_set_level = TS480_LEVEL_ALL,
.has_get_level = TS480_LEVEL_ALL,
.set_level = kenwood_ts480_set_level,
.get_level = kenwood_ts480_get_level,
.set_ext_level = ts480_set_ext_level,
.get_ext_level = ts480_get_ext_level,
.has_get_func = TS480_FUNC_ALL,
.has_set_func = TS480_FUNC_ALL,
.set_func = ts480_set_func,
.get_func = ts480_get_func,
.set_ext_func = ts480_set_ext_func,
.get_ext_func = ts480_get_ext_func,
.send_morse = kenwood_send_morse,
.vfo_op = kenwood_vfo_op,
.hamlib_check_rig_caps = "HAMLIB_CHECK_RIG_CAPS"
};
/*
* Hilberling PS8000A TS480 emulation
* Notice that some rigs share the same functions.
*/
const struct rig_caps pt8000a_caps =
{
RIG_MODEL(RIG_MODEL_PT8000A),
.model_name = "PT-8000A",
.mfg_name = "Hilberling",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG_MICDATA,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 57600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 20,
.timeout = 200,
.retry = 10,
.preamp = {12, RIG_DBLST_END,},
.attenuator = {12, RIG_DBLST_END,},
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.rx_range_list1 = { // not region specific
{kHz(9), MHz(30), PS8000A_ALL_MODES, -1, -1, TS480_VFO, RIG_ANT_2 | RIG_ANT_3, "Generic"},
{MHz(50), MHz(54), PS8000A_ALL_MODES, -1, -1, TS480_VFO, RIG_ANT_1, "Generic"},
{MHz(69.9), MHz(70.5), PS8000A_ALL_MODES, -1, -1, TS480_VFO, RIG_ANT_1, "Generic"},
{MHz(110), MHz(143.99), PS8000A_ALL_MODES, -1, -1, TS480_VFO, RIG_ANT_1, "Generic"},
{MHz(144), MHz(148), PS8000A_ALL_MODES, -1, -1, TS480_VFO, RIG_ANT_1, "Generic"},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 1 */
.tx_range_list1 = {
{MHz(1.8), MHz(30), TS480_OTHER_TX_MODES, 1000, 200000, TS480_VFO, RIG_ANT_2 | RIG_ANT_3, "Generic"}, /* 200W class */
{MHz(1.8), MHz(30), TS480_AM_TX_MODES | RIG_MODE_AMS, 5000, 50000, TS480_VFO, RIG_ANT_2 | RIG_ANT_3, "Generic"}, /* 50W class */
{MHz(50), MHz(54), TS480_OTHER_TX_MODES, 1000, 100000, TS480_VFO, RIG_ANT_1, "Generic"}, /* 100W class */
{MHz(50), MHz(54), TS480_AM_TX_MODES | RIG_MODE_AMS, 5000, 25000, TS480_VFO, RIG_ANT_1, "Generic"}, /* 25W class */
{MHz(69.9), MHz(70.5), TS480_OTHER_TX_MODES, 1000, 100000, TS480_VFO, RIG_ANT_1, "Generic"}, /* 100W class */
{MHz(69.9), MHz(70.5), TS480_AM_TX_MODES | RIG_MODE_AMS, 5000, 25000, TS480_VFO, RIG_ANT_1, "Generic"}, /* 25W class */
{MHz(144), MHz(148), TS480_OTHER_TX_MODES, 1000, 100000, TS480_VFO, RIG_ANT_1, "Generic"}, /* 100W class */
{MHz(144), MHz(148), TS480_AM_TX_MODES | RIG_MODE_AMS, 5000, 25000, TS480_VFO, RIG_ANT_1, "Generic"}, /* 25W class */
RIG_FRNG_END,
},
.tuning_steps = {
{PS8000A_ALL_MODES, Hz(1)},
{PS8000A_ALL_MODES, Hz(10)},
{PS8000A_ALL_MODES, Hz(100)},
{PS8000A_ALL_MODES, Hz(1000)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(1.0)},
{RIG_MODE_SSB, kHz(1.2)},
{RIG_MODE_SSB, kHz(1.4)},
{RIG_MODE_SSB, kHz(1.6)},
{RIG_MODE_SSB, kHz(1.8)},
{RIG_MODE_SSB, kHz(1.9)},
{RIG_MODE_SSB, kHz(2.0)},
{RIG_MODE_SSB, kHz(2.1)},
{RIG_MODE_SSB, kHz(2.2)},
{RIG_MODE_SSB, kHz(2.3)},
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_SSB, kHz(2.5)},
{RIG_MODE_SSB, kHz(2.6)},
{RIG_MODE_SSB, kHz(2.7)},
{RIG_MODE_SSB, kHz(2.8)},
{RIG_MODE_SSB, kHz(2.9)},
{RIG_MODE_SSB, kHz(3.0)},
{RIG_MODE_SSB, kHz(3.1)},
{RIG_MODE_SSB, kHz(3.2)},
{RIG_MODE_SSB, kHz(3.3)},
{RIG_MODE_SSB, kHz(3.4)},
{RIG_MODE_SSB, kHz(3.5)},
{RIG_MODE_SSB, kHz(4.6)},
{RIG_MODE_SSB, kHz(6.0)},
{RIG_MODE_CW, Hz(50)},
{RIG_MODE_CW, Hz(100)},
{RIG_MODE_CW, Hz(200)},
{RIG_MODE_CW, Hz(400)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_AM, kHz(2.5)},
{RIG_MODE_AM, kHz(2.6)},
{RIG_MODE_AM, kHz(2.7)},
{RIG_MODE_AM, kHz(2.8)},
{RIG_MODE_AM, kHz(2.9)},
{RIG_MODE_AM, kHz(3.0)},
{RIG_MODE_AM, kHz(3.1)},
{RIG_MODE_AM, kHz(3.2)},
{RIG_MODE_AM, kHz(3.3)},
{RIG_MODE_AM, kHz(3.4)},
{RIG_MODE_AM, kHz(3.5)},
{RIG_MODE_AM, kHz(3.5)},
{RIG_MODE_AM, kHz(4.6)},
{RIG_MODE_AM, kHz(6.0)},
{RIG_MODE_FM, kHz(2.4)},
{RIG_MODE_FM, kHz(2.5)},
{RIG_MODE_FM, kHz(2.6)},
{RIG_MODE_FM, kHz(2.7)},
{RIG_MODE_FM, kHz(2.8)},
{RIG_MODE_FM, kHz(2.9)},
{RIG_MODE_FM, kHz(3.0)},
{RIG_MODE_FM, kHz(3.1)},
{RIG_MODE_FM, kHz(3.2)},
{RIG_MODE_FM, kHz(3.3)},
{RIG_MODE_FM, kHz(3.4)},
{RIG_MODE_FM, kHz(3.5)},
{RIG_MODE_FM, kHz(3.5)},
{RIG_MODE_FM, kHz(4.6)},
{RIG_MODE_FM, kHz(6.0)},
RIG_FLT_END,
},
.priv = (void *)& ts480_priv_caps,
.rig_init = kenwood_init,
.rig_open = kenwood_open,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_split_vfo = kenwood_set_split_vfo,
.get_split_vfo = kenwood_get_split_vfo_if,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.get_info = kenwood_ts480_get_info,
.reset = kenwood_reset,
.set_ant = kenwood_set_ant,
.get_ant = kenwood_get_ant,
.scan = kenwood_scan, /* not working, invalid arguments using rigctl; kenwood_scan does only support on/off and not tone and CTCSS scan */
.has_set_level = TS480_LEVEL_ALL,
.has_get_level = TS480_LEVEL_ALL,
.set_level = kenwood_ts480_set_level,
.get_level = kenwood_ts480_get_level,
.has_get_func = TS480_FUNC_ALL,
.has_set_func = TS480_FUNC_ALL,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
};
const struct confparams malachite_cfg_parms[] =
{
{
// the Malachite SDR cannot handle sending ID; after FA; commands
TOK_NO_ID, "no_id", "No ID", "If true do not send ID; with set commands",
NULL, RIG_CONF_CHECKBUTTON, { }
},
{ RIG_CONF_END, NULL, }
};
int malachite_init(RIG *rig)
{
struct kenwood_priv_data *priv;
int retval;
ENTERFUNC;
retval = kenwood_init(rig);
priv = rig->state.priv;
priv->no_id = 1; // the Malchite doesn't like the ID; verify cmd
if (retval != RIG_OK) { RETURNFUNC(retval); }
RETURNFUNC(RIG_OK);
}
int malachite_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
int retval;
// Malachite has a bug where it takes two freq set to make it work
// under some band changes -- so we just do this all the time
retval = kenwood_set_freq(rig, vfo, freq + 1);
if (retval != RIG_OK) { RETURNFUNC(retval); }
retval = kenwood_set_freq(rig, vfo, freq);
RETURNFUNC(retval);
}
/*
* Malachite SDR rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*/
const struct rig_caps malachite_caps =
{
RIG_MODEL(RIG_MODEL_MALACHITE),
.model_name = "DSP",
.mfg_name = "Malachite",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 400,
.timeout = 3000,
.retry = 3,
.preamp = {0, RIG_DBLST_END,},
.attenuator = {0, RIG_DBLST_END,},
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_POLL,
.rx_range_list1 = {
{kHz(50), MHz(250), TS480_ALL_MODES, -1, -1, RIG_VFO_A, RIG_ANT_CURR, "Generic" },
{MHz(400), GHz(2), TS480_ALL_MODES, -1, -1, RIG_VFO_A, RIG_ANT_CURR, "Generic" },
RIG_FRNG_END,
},
.priv = (void *)& ts480_priv_caps,
.rig_init = malachite_init,
.rig_open = kenwood_open,
.rig_cleanup = kenwood_cleanup,
.set_freq = malachite_set_freq,
.get_freq = kenwood_get_freq,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.set_vfo = kenwood_set_vfo, // Malachite only supports VFOA
.get_vfo = kenwood_get_vfo_if,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
};