Hamlib/alinco/dx77.c

205 wiersze
6.0 KiB
C

/*
* hamlib - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com)
*
* dx77.c - Copyright (C) 2001 Stephane Fillod
* This shared library provides an API for communicating
* via serial interface to a Alinco radio.
*
*
* $Id: dx77.c,v 1.1 2001-06-03 17:39:59 f4cfe Exp $
*
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#include <stdlib.h>
#include <stdio.h> /* Standard input/output definitions */
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <fcntl.h> /* File control definitions */
#include <errno.h> /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <sys/ioctl.h>
#include <hamlib/rig.h>
#include <hamlib/riglist.h>
#include "alinco.h"
#define DX77_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DX77_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DX77_AM_TX_MODES RIG_MODE_AM
#define DX77_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TONE|RIG_FUNC_COMP)
#define DX77_LEVEL_ALL (RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH|RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD|RIG_LEVEL_BKINDL|RIG_LEVEL_CWPITCH)
#define DX77_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT)
#define DX77_VFO (RIG_VFO_A|RIG_VFO_B)
/* 90 is S9 */
#define DX77_STR_CAL { 13, { \
{ 0, -60 }, \
{ 28, -48 }, \
{ 36, -42 }, \
{ 42, -36 }, \
{ 50, -30 }, \
{ 58, -24 }, \
{ 66, -18 }, \
{ 74, -12 }, \
{ 82, -6 }, \
{ 90, 0 }, \
{ 132, 20 }, \
{ 174, 40 }, \
{ 216, 60 }, \
} }
static const struct alinco_priv_caps dx77_priv_caps = {
DX77_STR_CAL
};
/*
* dx77 rig capabilities.
*
* protocol is documented at
* http://www.alinco.com/pdf.files/DX77-77_SOFTWARE_MANUAL.pdf
*
* This backend was a pleasure to develop. Documentation is clear,
* and the protocol logical. I'm wondering is the rig's good too. --SF
*
* TODO:
* - get_parm/set_parm and some LEVELs left (Set Data "2W" command).
* - tuner
* - up/down
* - scan
*/
const struct rig_caps dx77_caps = {
rig_model: RIG_MODEL_DX77,
model_name:"DX-77",
mfg_name: "Alinco",
version: "0.1",
copyright: "GPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_TRANSCEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 9600,
serial_rate_max: 9600,
serial_data_bits: 8,
serial_stop_bits: 2,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,
has_get_func: DX77_FUNC,
has_set_func: DX77_FUNC|RIG_FUNC_MON,
has_get_level: DX77_LEVEL_ALL,
has_set_level: RIG_LEVEL_SET(DX77_LEVEL_ALL),
has_get_parm: DX77_PARM_ALL,
has_set_parm: RIG_PARM_SET(DX77_PARM_ALL),
level_gran: {}, /* FIXME: granularity */
parm_gran: {},
ctcss_list: common_ctcss_list,
dcs_list: NULL,
preamp: { 10, RIG_DBLST_END },
attenuator: { 10, 20, RIG_DBLST_END },
max_rit: kHz(1),
max_xit: Hz(0),
max_ifshift: Hz(0),
targetable_vfo: 0,
transceive: RIG_TRN_OFF,
bank_qty: 0,
chan_desc_sz: 0,
chan_list: {
{ 0, 99, RIG_MTYPE_MEM, 0 },
RIG_CHAN_END,
},
rx_range_list1: { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
tx_range_list1: { RIG_FRNG_END, },
rx_range_list2: {
{kHz(500),MHz(30),DX77_ALL_MODES,-1,-1,DX77_VFO},
RIG_FRNG_END,
},
tx_range_list2: {
{kHz(1800),MHz(2)-100,DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(1800),MHz(2)-100,DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(3500),MHz(4)-100,DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(3500),MHz(4)-100,DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(7),kHz(7300),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(7),kHz(7300),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(10100),kHz(10150),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(10100),kHz(10150),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(14),kHz(14350),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(14),kHz(14350),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(18068),kHz(18168),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(18068),kHz(18168),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(21),kHz(21450),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(21),kHz(21450),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(24890),kHz(24990),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(24890),kHz(24990),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(28),kHz(29700),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(28),kHz(29700),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
RIG_FRNG_END,
},
tuning_steps: {
{DX77_ALL_MODES,10}, /* FIXME: add other ts */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
filters: {
{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.7)},
{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
{RIG_MODE_AM, kHz(2.7)},
RIG_FLT_END,
},
priv: (void*)&dx77_priv_caps,
set_freq: alinco_set_freq,
get_freq: alinco_get_freq,
set_mode: alinco_set_mode,
get_mode: alinco_get_mode,
set_vfo: alinco_set_vfo,
get_vfo: alinco_get_vfo,
set_split: alinco_set_split,
get_split: alinco_get_split,
set_split_freq: alinco_set_split_freq,
get_split_freq: alinco_get_split_freq,
set_ctcss: alinco_set_ctcss,
get_rit: alinco_get_rit,
get_ptt: alinco_get_ptt,
get_dcd: alinco_get_dcd,
set_func: alinco_set_func,
get_func: alinco_get_func,
set_level: alinco_set_level,
get_level: alinco_get_level,
set_mem: alinco_set_mem,
get_mem: alinco_get_mem,
};
/*
* Function definitions below
*/