kopia lustrzana https://github.com/Hamlib/Hamlib
6d4295af2c
Android makefile fragments are distributed as extra distribution files by the GNU build system but are otherwise ignored. The Android build support is independent and does not rely on the GNU build system. See android/README.android for more info. Signed-off-by: Nate Bargmann <n0nb@n0nb.us> |
||
|---|---|---|
| .. | ||
| Android.mk | ||
| Makefile.am | ||
| README.aor | ||
| README.ar5000 | ||
| README.ar7030 | ||
| aor.c | ||
| aor.h | ||
| ar2700.c | ||
| ar3000.c | ||
| ar3030.c | ||
| ar5000.c | ||
| ar7030.c | ||
| ar7030p.c | ||
| ar7030p.h | ||
| ar7030p_utils.c | ||
| ar8000.c | ||
| ar8200.c | ||
| ar8600.c | ||
| sr2200.c | ||
README.ar7030
hamlib-1.2.3 aor ar7030.c
2004.11.26
Parameteraenderung fuer USB-Serial
//.post_write_delay = 0, //Device: /dev/ttyS0
//.post_write_delay = 85, //Device: /dev/tts/USB0 < 85 sec 'timedout after 0 chars'
Befehle mit rigctl
# rigctl -m 503 -r /dev/ttyS0
# rigctl -m 503 -r /dev/tts/USB0
Rig command: F Frequency: 0 .. 32016718 Hz
Rig command: f
Rig command: \get_freq
Rig command: M Mode: FM, AMS, AM, USB, LSB, CW, RTTY
Passband: 1 - 6
Rig command: m Passband: 800, 2100, 3700, 5200, 9500, XXXX (Value from RX) Hz
Rig command: L
Level: AF Value: 0.0 - 1.0
Level: RF Value: 0.1, 0.0 -0.1, -0.2, -0.3, -0.4 > +10, 0 ,-10 , -20, -30, -40 dB
Level: SQL Value: 0.0 - 1.0
Level: AGC Value: 0 > OFF, 2 > FAST, 3 > SLOW, 5 > MEDIUM
Level: CWPITCH Value: -4248 .. 0 .. 4215 Hz
Rig command: l
Level: AF
Level: RF
Level: SQL
Level: AGC
Level: CWPITCH
Level: RAWSTR
Level: STRENGTH Value: -121dBm ... -23dBm > S1 ... S9 + 50 dB
Rig command: \set_powerstat Status: 0 > Power off, 1 > Power on
Rig command: \get_powerstat
Rig command: \reset Reset: 1 > Software reset
Rig command: Quitt Q q
Rig command: Quitt Q Q
Rig command: 1 Caps dump for model 503
Friedrich Melchert (DC9RP)