kopia lustrzana https://github.com/Hamlib/Hamlib
2926 wiersze
66 KiB
C
2926 wiersze
66 KiB
C
/*
|
|
* Hamlib CI-V backend - main file
|
|
* Copyright (c) 2000-2005 by Stephane Fillod
|
|
*
|
|
* $Id: icom.c,v 1.107 2008-11-13 20:29:43 y32kn Exp $
|
|
*
|
|
* This library is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU Library General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Library General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Library General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h> /* String function definitions */
|
|
#include <unistd.h> /* UNIX standard function definitions */
|
|
#include <math.h>
|
|
|
|
#include <hamlib/rig.h>
|
|
#include <serial.h>
|
|
#include <misc.h>
|
|
#include <cal.h>
|
|
#include <token.h>
|
|
#include <register.h>
|
|
|
|
#include "icom.h"
|
|
#include "icom_defs.h"
|
|
#include "frame.h"
|
|
|
|
const struct ts_sc_list r8500_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ 50, 0x01 },
|
|
{ 100, 0x02 },
|
|
{ kHz(1), 0x03 },
|
|
{ 12500, 0x04 },
|
|
{ kHz(5), 0x05 },
|
|
{ kHz(9), 0x06 },
|
|
{ kHz(10), 0x07 },
|
|
{ 12500, 0x08 },
|
|
{ kHz(20), 0x09 },
|
|
{ kHz(25), 0x10 },
|
|
{ kHz(100), 0x11 },
|
|
{ MHz(1), 0x12 },
|
|
{ 0, 0x13 }, /* programmable tuning step not supported */
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list ic737_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ kHz(1), 0x01 },
|
|
{ kHz(2), 0x02 },
|
|
{ kHz(3), 0x03 },
|
|
{ kHz(4), 0x04 },
|
|
{ kHz(5), 0x05 },
|
|
{ kHz(6), 0x06 },
|
|
{ kHz(7), 0x07 },
|
|
{ kHz(8), 0x08 },
|
|
{ kHz(9), 0x09 },
|
|
{ kHz(10), 0x10 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list r75_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ 100, 0x01 },
|
|
{ kHz(1), 0x02 },
|
|
{ kHz(5), 0x03 },
|
|
{ 6250, 0x04 },
|
|
{ kHz(9), 0x05 },
|
|
{ kHz(10), 0x06 },
|
|
{ 12500, 0x07 },
|
|
{ kHz(20), 0x08 },
|
|
{ kHz(25), 0x09 },
|
|
{ kHz(100), 0x10 },
|
|
{ MHz(1), 0x11 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list r7100_ts_sc_list[] = {
|
|
{ 100, 0x00 },
|
|
{ kHz(1), 0x01 },
|
|
{ kHz(5), 0x02 },
|
|
{ kHz(10), 0x03 },
|
|
{ 12500, 0x04 },
|
|
{ kHz(20), 0x05 },
|
|
{ kHz(25), 0x06 },
|
|
{ kHz(100), 0x07 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list r9000_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ 100, 0x01 },
|
|
{ kHz(1), 0x02 },
|
|
{ kHz(5), 0x03 },
|
|
{ kHz(9), 0x04 },
|
|
{ kHz(10), 0x05 },
|
|
{ 12500, 0x06 },
|
|
{ kHz(20), 0x07 },
|
|
{ kHz(25), 0x08 },
|
|
{ kHz(100), 0x09 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list ic718_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ kHz(1), 0x01 },
|
|
{ kHz(5), 0x01 },
|
|
{ kHz(9), 0x01 },
|
|
{ kHz(10), 0x04 },
|
|
{ kHz(100), 0x05 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list ic756_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ kHz(1), 0x01 },
|
|
{ kHz(5), 0x02 },
|
|
{ kHz(9), 0x03 },
|
|
{ kHz(10), 0x04 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list ic756pro_ts_sc_list[] = {
|
|
{ 10, 0x00 }, /* 1 if step turned off */
|
|
{ 100, 0x01 },
|
|
{ kHz(1), 0x02 },
|
|
{ kHz(5), 0x03 },
|
|
{ kHz(9), 0x04 },
|
|
{ kHz(10), 0x05 },
|
|
{ kHz(12.5), 0x06 },
|
|
{ kHz(20), 0x07 },
|
|
{ kHz(25), 0x08 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list ic706_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ 100, 0x01 },
|
|
{ kHz(1), 0x02 },
|
|
{ kHz(5), 0x03 },
|
|
{ kHz(9), 0x04 },
|
|
{ kHz(10), 0x05 },
|
|
{ 12500, 0x06 },
|
|
{ kHz(20), 0x07 },
|
|
{ kHz(25), 0x08 },
|
|
{ kHz(100), 0x09 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list ic7000_ts_sc_list[] = {
|
|
{ 10, 0x00 },
|
|
{ 100, 0x01 },
|
|
{ kHz(1), 0x02 },
|
|
{ kHz(5), 0x03 },
|
|
{ kHz(9), 0x04 },
|
|
{ kHz(10), 0x05 },
|
|
{ 12500, 0x06 },
|
|
{ kHz(20), 0x07 },
|
|
{ kHz(25), 0x08 },
|
|
{ kHz(100), 0x09 },
|
|
{ MHz (1), 0x10 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
const struct ts_sc_list ic910_ts_sc_list[] = {
|
|
{ Hz(1), 0x00 },
|
|
{ Hz(10), 0x01 },
|
|
{ Hz(50), 0x02 },
|
|
{ Hz(100), 0x03 },
|
|
{ kHz(1), 0x04 },
|
|
{ kHz(5), 0x05 },
|
|
{ kHz(6.25), 0x06 },
|
|
{ kHz(10), 0x07 },
|
|
{ kHz(12.5), 0x08 },
|
|
{ kHz(20), 0x09 },
|
|
{ kHz(25), 0x10 },
|
|
{ kHz(100), 0x11 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
/* rtty filter list for some DSP rigs ie PRO */
|
|
const pbwidth_t rtty_fil[] = {
|
|
Hz(250),
|
|
Hz(300),
|
|
Hz(350),
|
|
Hz(500),
|
|
kHz(1),
|
|
0,
|
|
};
|
|
|
|
struct icom_addr {
|
|
rig_model_t model;
|
|
unsigned char re_civ_addr;
|
|
};
|
|
|
|
|
|
#define TOK_CIVADDR TOKEN_BACKEND(1)
|
|
#define TOK_MODE731 TOKEN_BACKEND(2)
|
|
|
|
const struct confparams icom_cfg_params[] = {
|
|
{ TOK_CIVADDR, "civaddr", "CI-V address", "Transceiver's CI-V address",
|
|
"0", RIG_CONF_NUMERIC, { .n = { 0, 0xff, 1 } }
|
|
},
|
|
{ TOK_MODE731, "mode731", "CI-V 731 mode", "CI-V operating frequency "
|
|
"data length, needed for IC731 and IC735",
|
|
"0", RIG_CONF_CHECKBUTTON
|
|
},
|
|
{ RIG_CONF_END, NULL, }
|
|
};
|
|
|
|
/*
|
|
* Please, if the default CI-V address of your rig is listed as UNKNOWN_ADDR,
|
|
* send the value to <f4cfe@users.sourceforge.net> for inclusion. Thanks --SF
|
|
*
|
|
* TODO: sort this list with most frequent rigs first.
|
|
*/
|
|
static const struct icom_addr icom_addr_list[] = {
|
|
{ RIG_MODEL_IC703, 0x68 },
|
|
{ RIG_MODEL_IC706, 0x48 },
|
|
{ RIG_MODEL_IC706MKII, 0x4e },
|
|
{ RIG_MODEL_IC706MKIIG, 0x58 },
|
|
{ RIG_MODEL_IC271, 0x20 },
|
|
{ RIG_MODEL_IC275, 0x10 },
|
|
{ RIG_MODEL_IC375, 0x12 },
|
|
{ RIG_MODEL_IC471, 0x22 },
|
|
{ RIG_MODEL_IC475, 0x14 },
|
|
{ RIG_MODEL_IC575, 0x16 },
|
|
{ RIG_MODEL_IC707, 0x3e },
|
|
{ RIG_MODEL_IC725, 0x28 },
|
|
{ RIG_MODEL_IC726, 0x30 },
|
|
{ RIG_MODEL_IC728, 0x38 },
|
|
{ RIG_MODEL_IC729, 0x3a },
|
|
{ RIG_MODEL_IC731, 0x02 }, /* need confirmation */
|
|
{ RIG_MODEL_IC735, 0x04 },
|
|
{ RIG_MODEL_IC736, 0x40 },
|
|
{ RIG_MODEL_IC746, 0x56 },
|
|
{ RIG_MODEL_IC746PRO, 0x66 },
|
|
{ RIG_MODEL_IC737, 0x3c },
|
|
{ RIG_MODEL_IC738, 0x44 },
|
|
{ RIG_MODEL_IC751, 0x1c },
|
|
{ RIG_MODEL_IC751A, 0x1c },
|
|
{ RIG_MODEL_IC756, 0x50 },
|
|
{ RIG_MODEL_IC756PRO, 0x5c },
|
|
{ RIG_MODEL_IC756PROII, 0x64 },
|
|
{ RIG_MODEL_IC756PROIII, 0x6e },
|
|
{ RIG_MODEL_IC761, 0x1e },
|
|
{ RIG_MODEL_IC765, 0x2c },
|
|
{ RIG_MODEL_IC775, 0x46 },
|
|
{ RIG_MODEL_IC7800, 0x6a },
|
|
{ RIG_MODEL_IC781, 0x26 },
|
|
{ RIG_MODEL_IC820, 0x42 },
|
|
{ RIG_MODEL_IC821, 0x4c },
|
|
{ RIG_MODEL_IC821H, 0x4c },
|
|
{ RIG_MODEL_IC910, 0x60 },
|
|
{ RIG_MODEL_IC970, 0x2e },
|
|
{ RIG_MODEL_IC1271, 0x24 },
|
|
{ RIG_MODEL_IC1275, 0x18 },
|
|
{ RIG_MODEL_ICR10, 0x52 },
|
|
{ RIG_MODEL_ICR20, 0x6c },
|
|
{ RIG_MODEL_ICR71, 0x1a },
|
|
{ RIG_MODEL_ICR72, 0x32 },
|
|
{ RIG_MODEL_ICR75, 0x5a },
|
|
{ RIG_MODEL_IC78, 0x62 },
|
|
{ RIG_MODEL_ICR7000, 0x08 },
|
|
{ RIG_MODEL_ICR7100, 0x34 },
|
|
{ RIG_MODEL_ICR8500, 0x4a },
|
|
{ RIG_MODEL_ICR9000, 0x2a },
|
|
{ RIG_MODEL_MINISCOUT, 0x94 },
|
|
{ RIG_MODEL_IC718, 0x5e },
|
|
{ RIG_MODEL_OS535, 0x80 },
|
|
{ RIG_MODEL_ICID1, 0x01 },
|
|
{ RIG_MODEL_IC7000, 0x70 },
|
|
{ RIG_MODEL_NONE, 0 },
|
|
};
|
|
|
|
/*
|
|
* This is a generic icom_init function.
|
|
* You might want to define yours, so you can customize it for your rig
|
|
*
|
|
* Basically, it sets up *priv
|
|
* REM: serial port is already open (rig->state.rigport.fd)
|
|
*/
|
|
int icom_init(RIG *rig)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
const struct icom_priv_caps *priv_caps;
|
|
const struct rig_caps *caps;
|
|
|
|
if (!rig || !rig->caps)
|
|
return -RIG_EINVAL;
|
|
|
|
caps = rig->caps;
|
|
|
|
if (!caps->priv)
|
|
return -RIG_ECONF;
|
|
|
|
priv_caps = (const struct icom_priv_caps *) caps->priv;
|
|
|
|
priv = (struct icom_priv_data*)malloc(sizeof(struct icom_priv_data));
|
|
if (!priv) {
|
|
/* whoops! memory shortage! */
|
|
return -RIG_ENOMEM;
|
|
}
|
|
|
|
rig->state.priv = (void*)priv;
|
|
|
|
/* TODO: CI-V address should be customizable */
|
|
|
|
/*
|
|
* init the priv_data from static struct
|
|
* + override with preferences
|
|
*/
|
|
|
|
priv->re_civ_addr = priv_caps->re_civ_addr;
|
|
priv->civ_731_mode = priv_caps->civ_731_mode;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* ICOM Generic icom_cleanup routine
|
|
* the serial port is closed by the frontend
|
|
*/
|
|
int icom_cleanup(RIG *rig)
|
|
{
|
|
if (!rig)
|
|
return -RIG_EINVAL;
|
|
|
|
if (rig->state.priv)
|
|
free(rig->state.priv);
|
|
rig->state.priv = NULL;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_freq
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char freqbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int freq_len, ack_len=sizeof(ackbuf), retval;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
|
|
freq_len = priv->civ_731_mode ? 4:5;
|
|
/*
|
|
* to_bcd requires nibble len
|
|
*/
|
|
to_bcd(freqbuf, freq, freq_len*2);
|
|
|
|
retval = icom_transaction (rig, C_SET_FREQ, -1, freqbuf, freq_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_freq: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_freq
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, freq!=NULL
|
|
* Note: old rig may return less than 4/5 bytes for get_freq
|
|
*/
|
|
int icom_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char freqbuf[MAXFRAMELEN];
|
|
int freq_len, retval;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
retval = icom_transaction (rig, C_RD_FREQ, -1, NULL, 0,
|
|
freqbuf, &freq_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* freqbuf should contain Cn,Data area
|
|
*/
|
|
freq_len--;
|
|
|
|
/*
|
|
* is it a blank mem channel ?
|
|
*/
|
|
if (freq_len == 1 && freqbuf[1] == 0xff) {
|
|
*freq = RIG_FREQ_NONE;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
if (freq_len != 4 && freq_len != 5) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_freq: wrong frame len=%d\n",
|
|
freq_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
if (freq_len != (priv->civ_731_mode ? 4:5)) {
|
|
rig_debug(RIG_DEBUG_WARN,"icom_get_freq: "
|
|
"freq len (%d) differs from "
|
|
"expected\n", freq_len);
|
|
}
|
|
|
|
/*
|
|
* from_bcd requires nibble len
|
|
*/
|
|
*freq = from_bcd(freqbuf+1, freq_len*2);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int icom_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
|
|
{
|
|
unsigned char freqbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int freq_len, ack_len=sizeof(ackbuf), retval;
|
|
|
|
|
|
freq_len = 2;
|
|
/*
|
|
* to_bcd requires nibble len
|
|
*/
|
|
to_bcd(freqbuf, rit, freq_len*2);
|
|
|
|
retval = icom_transaction (rig, C_SET_OFFS, -1, freqbuf, freq_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_rit: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/* icom_get_dsp_flt
|
|
returns the dsp filter width in hz or 0 if the command is not implemented or error. This allows the default parameters to be assigned from the get_mode routine if the command is not implemented.
|
|
Assumes rig != null and the current mode is in mode.
|
|
|
|
Has been tested for IC-746pro, Should work on the all dsp rigs ie pro models.
|
|
The 746 documentation says it has the get_if_filter, but doesn't give any decoding information ? Please test.
|
|
*/
|
|
|
|
pbwidth_t icom_get_dsp_flt(RIG *rig, rmode_t mode) {
|
|
|
|
int retval, res_len, rfstatus;
|
|
unsigned char resbuf[MAXFRAMELEN];
|
|
value_t rfwidth;
|
|
|
|
if (rig_has_get_func(rig, RIG_FUNC_RF) && (mode & (RIG_MODE_RTTY | RIG_MODE_RTTYR))) {
|
|
if(!rig_get_func(rig, RIG_VFO_CURR, RIG_FUNC_RF, &rfstatus) && (rfstatus)) {
|
|
retval = rig_get_ext_parm (rig, TOK_RTTY_FLTR, &rfwidth);
|
|
if (retval != RIG_OK) return 0; /* use default */
|
|
else return rtty_fil[rfwidth.i];
|
|
}
|
|
}
|
|
retval = icom_transaction (rig, C_CTL_MEM, S_MEM_FILT_WDTH, 0, 0,
|
|
resbuf, &res_len);
|
|
if (retval != RIG_OK) {
|
|
rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
|
|
"len=%d\n", __FUNCTION__,resbuf[0],res_len);
|
|
return 0; /* use default */
|
|
}
|
|
if (res_len == 3 && resbuf[0] == C_CTL_MEM) {
|
|
int i;
|
|
i = (int) from_bcd(resbuf + 2, 2);
|
|
|
|
if (mode & RIG_MODE_AM) return (i + 1)* 200; /* Ic_7800 */
|
|
else if ( mode & (RIG_MODE_CW | RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_RTTY | RIG_MODE_RTTYR)) return i < 10 ? ++i * 50 : (i -4) * 100;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_mode
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
const struct icom_priv_caps *priv_caps;
|
|
struct rig_state *rs;
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
unsigned char icmode;
|
|
signed char icmode_ext;
|
|
int ack_len=sizeof(ackbuf), retval, err;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
priv_caps = (const struct icom_priv_caps *) rig->caps->priv;
|
|
|
|
if (priv_caps->r2i_mode != NULL) { /* call priv code if defined */
|
|
err = priv_caps->r2i_mode(rig, mode, width,
|
|
&icmode, &icmode_ext);
|
|
}
|
|
else { /* else call default */
|
|
err = rig2icom_mode(rig, mode, width,
|
|
&icmode, &icmode_ext);
|
|
}
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* IC-731 and IC-735 don't support passband data */
|
|
if (priv->civ_731_mode || rig->caps->rig_model == RIG_MODEL_OS456)
|
|
icmode_ext = -1;
|
|
|
|
retval = icom_transaction (rig, C_SET_MODE, icmode, (unsigned char *) &icmode_ext,
|
|
(icmode_ext == -1 ? 0 : 1), ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_mode: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_mode
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, mode!=NULL, width!=NULL
|
|
*
|
|
* TODO: some IC781's, when sending mode info, in wide filter mode, no
|
|
* width data is send along, making the frame 1 byte short.
|
|
* (Thank to Mel, VE2DC for this info)
|
|
*/
|
|
int icom_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char modebuf[MAXFRAMELEN];
|
|
int mode_len, retval;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
retval = icom_transaction (rig, C_RD_MODE, -1, NULL, 0,
|
|
modebuf, &mode_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* modebuf should contain Cn,Data area
|
|
*/
|
|
mode_len--;
|
|
if (mode_len != 2 && mode_len != 1) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_mode: wrong frame len=%d\n",
|
|
mode_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
icom2rig_mode(rig, modebuf[1], mode_len==2 ? modebuf[2] : -1, mode, width);
|
|
/* IC910H has different meaning of command 1A, subcommand 03. So do
|
|
* not ask for DSP filter settings */
|
|
/* Likewise, don't ask if we happen to be an Omni VI Plus */
|
|
if ( (rig->caps->rig_model == RIG_MODEL_IC910) ||
|
|
(rig->caps->rig_model == RIG_MODEL_OMNIVIP) )
|
|
return RIG_OK;
|
|
|
|
/* Most rigs return 1-wide, 2-normal,3-narrow
|
|
* For DSP rigs these are presets, can be programmed for 30 - 41 bandwidths, depending on mode.
|
|
* Lets check for dsp filters
|
|
*/
|
|
|
|
if ((retval = icom_get_dsp_flt(rig, *mode)) !=0)
|
|
*width = retval;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_vfo
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_vfo(RIG *rig, vfo_t vfo)
|
|
{
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), icvfo, retval;
|
|
|
|
|
|
if (vfo == RIG_VFO_CURR)
|
|
return RIG_OK;
|
|
|
|
switch(vfo) {
|
|
case RIG_VFO_A: icvfo = S_VFOA; break;
|
|
case RIG_VFO_B: icvfo = S_VFOB; break;
|
|
case RIG_VFO_MAIN: icvfo = S_MAIN; break;
|
|
case RIG_VFO_SUB: icvfo = S_SUB; break;
|
|
case RIG_VFO_VFO:
|
|
retval = icom_transaction (rig, C_SET_VFO, -1, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_vfo: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
return RIG_OK;
|
|
case RIG_VFO_MEM:
|
|
retval = icom_transaction (rig, C_SET_MEM, -1, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_vfo: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
return RIG_OK;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"icom: Unsupported VFO %d\n", vfo);
|
|
return -RIG_EINVAL;
|
|
}
|
|
retval = icom_transaction (rig, C_SET_VFO, icvfo, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_vfo: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_level
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char lvlbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), lvl_len;
|
|
int lvl_cn, lvl_sc; /* Command Number, Subcommand */
|
|
int icom_val;
|
|
int i, retval;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
|
|
/*
|
|
* So far, levels of float type are in [0.0..1.0] range
|
|
*/
|
|
if (RIG_LEVEL_IS_FLOAT(level))
|
|
icom_val = val.f * 255;
|
|
else
|
|
icom_val = val.i;
|
|
|
|
/* convert values to 0 .. 255 range */
|
|
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
|
|
switch (level) {
|
|
case RIG_LEVEL_NR:
|
|
icom_val = val.f * 240;
|
|
break;
|
|
case RIG_LEVEL_PBT_IN:
|
|
case RIG_LEVEL_PBT_OUT:
|
|
icom_val = (val.f / 10.0) + 128;
|
|
if (icom_val > 255)
|
|
icom_val = 255;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Most of the time, the data field is a 3 digit BCD,
|
|
* but in *big endian* order: 0000..0255
|
|
* (from_bcd is little endian)
|
|
*/
|
|
lvl_len = 2;
|
|
to_bcd_be(lvlbuf, (long long)icom_val, lvl_len*2);
|
|
|
|
/* Optimize:
|
|
* sort the switch cases with the most frequent first
|
|
*/
|
|
switch (level) {
|
|
case RIG_LEVEL_PREAMP:
|
|
lvl_cn = C_CTL_FUNC;
|
|
lvl_sc = S_FUNC_PAMP;
|
|
lvl_len = 1;
|
|
if (val.i == 0) {
|
|
lvlbuf[0] = 0; /* 0=OFF */
|
|
break;
|
|
}
|
|
for (i=0; i<MAXDBLSTSIZ; i++) {
|
|
if (rs->preamp[i] == val.i)
|
|
break;
|
|
}
|
|
if (i==MAXDBLSTSIZ || rs->preamp[i] == 0) {
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported preamp set_level %ddB",
|
|
val.i);
|
|
return -RIG_EINVAL;
|
|
}
|
|
lvlbuf[0] = i+1; /* 1=P.AMP1, 2=P.AMP2 */
|
|
break;
|
|
case RIG_LEVEL_ATT:
|
|
lvl_cn = C_CTL_ATT;
|
|
/* attenuator level is dB, in BCD mode */
|
|
lvl_sc = (val.i/10)<<4 | (val.i%10);
|
|
lvl_len = 0;
|
|
break;
|
|
case RIG_LEVEL_AF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_AF;
|
|
break;
|
|
case RIG_LEVEL_RF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_RF;
|
|
break;
|
|
case RIG_LEVEL_SQL:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_SQL;
|
|
break;
|
|
case RIG_LEVEL_IF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_IF;
|
|
break;
|
|
case RIG_LEVEL_APF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_APF;
|
|
break;
|
|
case RIG_LEVEL_NR:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_NR;
|
|
break;
|
|
case RIG_LEVEL_PBT_IN:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_PBTIN;
|
|
break;
|
|
case RIG_LEVEL_PBT_OUT:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_PBTOUT;
|
|
break;
|
|
case RIG_LEVEL_CWPITCH:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_CWPITCH;
|
|
/* use 'set mode' call for CWPITCH on IC-R75*/
|
|
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_MODE_SLCT;
|
|
lvl_len = 3;
|
|
lvlbuf[0] = S_PRM_CWPITCH;
|
|
to_bcd_be(lvlbuf+1, (long long)icom_val, 4);
|
|
}
|
|
break;
|
|
case RIG_LEVEL_RFPOWER:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_RFPOWER;
|
|
break;
|
|
case RIG_LEVEL_MICGAIN:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_MICGAIN;
|
|
break;
|
|
case RIG_LEVEL_KEYSPD:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_KEYSPD;
|
|
break;
|
|
case RIG_LEVEL_NOTCHF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_NOTCHF;
|
|
break;
|
|
case RIG_LEVEL_COMP:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_COMP;
|
|
break;
|
|
case RIG_LEVEL_AGC:
|
|
lvl_cn = C_CTL_FUNC;
|
|
lvl_sc = S_FUNC_AGC;
|
|
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
|
|
lvl_len = 1;
|
|
lvlbuf[0] = val.i;
|
|
}
|
|
break;
|
|
case RIG_LEVEL_BKINDL:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_BKINDL;
|
|
break;
|
|
case RIG_LEVEL_BALANCE:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_BALANCE;
|
|
break;
|
|
case RIG_LEVEL_VOXGAIN: /* IC-910H */
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_VOXGAIN;
|
|
break;
|
|
case RIG_LEVEL_VOXDELAY: /* IC-910H */
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_VOXDELAY;
|
|
break;
|
|
case RIG_LEVEL_ANTIVOX: /* IC-910H */
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_ANTIVOX;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported set_level %d", level);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, lvl_cn, lvl_sc, lvlbuf, lvl_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_level: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_level
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, val!=NULL
|
|
*/
|
|
int icom_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char lvlbuf[MAXFRAMELEN], lvl2buf[MAXFRAMELEN];
|
|
int lvl_len, lvl2_len;
|
|
int lvl_cn, lvl_sc; /* Command Number, Subcommand */
|
|
int icom_val;
|
|
int cmdhead;
|
|
int retval;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
lvl2_len = 0;
|
|
/* Optimize:
|
|
* sort the switch cases with the most frequent first
|
|
*/
|
|
switch (level) {
|
|
case RIG_LEVEL_STRENGTH:
|
|
case RIG_LEVEL_RAWSTR:
|
|
lvl_cn = C_RD_SQSM;
|
|
lvl_sc = S_SML;
|
|
break;
|
|
case RIG_LEVEL_PREAMP:
|
|
lvl_cn = C_CTL_FUNC;
|
|
lvl_sc = S_FUNC_PAMP;
|
|
break;
|
|
case RIG_LEVEL_ATT:
|
|
lvl_cn = C_CTL_ATT;
|
|
lvl_sc = -1;
|
|
break;
|
|
case RIG_LEVEL_AF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_AF;
|
|
break;
|
|
case RIG_LEVEL_RF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_RF;
|
|
break;
|
|
case RIG_LEVEL_SQL:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_SQL;
|
|
break;
|
|
case RIG_LEVEL_IF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_IF;
|
|
break;
|
|
case RIG_LEVEL_APF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_APF;
|
|
break;
|
|
case RIG_LEVEL_NR:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_NR;
|
|
break;
|
|
case RIG_LEVEL_PBT_IN:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_PBTIN;
|
|
break;
|
|
case RIG_LEVEL_PBT_OUT:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_PBTOUT;
|
|
break;
|
|
case RIG_LEVEL_CWPITCH:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_CWPITCH;
|
|
/* use 'set mode' call for CWPITCH on IC-R75*/
|
|
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_MODE_SLCT;
|
|
lvl2_len = 1;
|
|
lvl2buf[0] = S_PRM_CWPITCH;
|
|
}
|
|
break;
|
|
case RIG_LEVEL_RFPOWER:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_RFPOWER;
|
|
break;
|
|
case RIG_LEVEL_MICGAIN:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_MICGAIN;
|
|
break;
|
|
case RIG_LEVEL_KEYSPD:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_KEYSPD;
|
|
break;
|
|
case RIG_LEVEL_NOTCHF:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_NOTCHF;
|
|
break;
|
|
case RIG_LEVEL_COMP:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_COMP;
|
|
break;
|
|
case RIG_LEVEL_AGC:
|
|
lvl_cn = C_CTL_FUNC;
|
|
lvl_sc = S_FUNC_AGC;
|
|
break;
|
|
case RIG_LEVEL_BKINDL:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_BKINDL;
|
|
break;
|
|
case RIG_LEVEL_BALANCE:
|
|
lvl_cn = C_CTL_LVL;
|
|
lvl_sc = S_LVL_BALANCE;
|
|
break;
|
|
case RIG_LEVEL_VOXGAIN: /* IC-910H */
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_VOXGAIN;
|
|
break;
|
|
case RIG_LEVEL_VOXDELAY: /* IC-910H */
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_VOXDELAY;
|
|
break;
|
|
case RIG_LEVEL_ANTIVOX: /* IC-910H */
|
|
lvl_cn = C_CTL_MEM;
|
|
lvl_sc = S_MEM_ANTIVOX;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported get_level %d", level);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
/* use lvl2buf and lvl2_len for 'set mode' subcommand */
|
|
retval = icom_transaction (rig, lvl_cn, lvl_sc, lvl2buf, lvl2_len,
|
|
lvlbuf, &lvl_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* strbuf should contain Cn,Sc,Data area
|
|
*/
|
|
cmdhead = (lvl_sc == -1) ? 1:2;
|
|
lvl_len -= cmdhead;
|
|
/* back off one char since first char in buffer is now 'set mode' subcommand */
|
|
if ((rig->caps->rig_model == RIG_MODEL_ICR75)&&(level==RIG_LEVEL_CWPITCH)){
|
|
cmdhead = 3;
|
|
lvl_len--;
|
|
}
|
|
|
|
if (lvlbuf[0] != ACK && lvlbuf[0] != lvl_cn) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_level: ack NG (%#.2x), "
|
|
"len=%d\n", lvlbuf[0],lvl_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
/*
|
|
* The result is a 3 digit BCD, but in *big endian* order: 0000..0255
|
|
* (from_bcd is little endian)
|
|
*/
|
|
icom_val = from_bcd_be(lvlbuf+cmdhead, lvl_len*2);
|
|
|
|
switch (level) {
|
|
case RIG_LEVEL_RAWSTR:
|
|
val->i = icom_val;
|
|
break;
|
|
case RIG_LEVEL_PREAMP:
|
|
if (icom_val == 0) {
|
|
val->i = 0;
|
|
break;
|
|
}
|
|
if (icom_val > MAXDBLSTSIZ || rs->preamp[icom_val-1]==0) {
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported preamp get_level %ddB",
|
|
icom_val);
|
|
return -RIG_EPROTO;
|
|
}
|
|
val->i = rs->preamp[icom_val-1];
|
|
break;
|
|
/* RIG_LEVEL_ATT: returned value is already an integer in dB (coded in BCD) */
|
|
default:
|
|
if (RIG_LEVEL_IS_FLOAT(level))
|
|
val->f = (float)icom_val/255;
|
|
else
|
|
val->i = icom_val;
|
|
}
|
|
|
|
/* convert values from 0 .. 255 range */
|
|
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
|
|
switch (level) {
|
|
case RIG_LEVEL_NR:
|
|
val->f = (float)icom_val / 240;
|
|
break;
|
|
case RIG_LEVEL_PBT_IN:
|
|
case RIG_LEVEL_PBT_OUT:
|
|
if (icom_val == 255)
|
|
val->f = 1280.0;
|
|
else
|
|
val->f = (float)(icom_val - 128) * 10.0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
rig_debug(RIG_DEBUG_TRACE,"icom_get_level: %d %d %d %f\n", lvl_len,
|
|
icom_val, val->i, val->f);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_conf(RIG *rig, token_t token, const char *val)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
switch(token) {
|
|
case TOK_CIVADDR:
|
|
if (val[0] == '0' && val[1] == 'x')
|
|
priv->re_civ_addr = strtol(val, (char **)NULL, 16);
|
|
else
|
|
priv->re_civ_addr = atoi(val);
|
|
break;
|
|
case TOK_MODE731:
|
|
priv->civ_731_mode = atoi(val) ? 1:0;
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* assumes rig!=NULL,
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
* and val points to a buffer big enough to hold the conf value.
|
|
*/
|
|
int icom_get_conf(RIG *rig, token_t token, char *val)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
switch(token) {
|
|
case TOK_CIVADDR:
|
|
sprintf(val, "%d", priv->re_civ_addr);
|
|
break;
|
|
case TOK_MODE731:
|
|
sprintf(val, "%d", priv->civ_731_mode);
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_ptt
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
|
|
{
|
|
unsigned char ackbuf[MAXFRAMELEN], pttbuf[1];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
|
|
pttbuf[0] = ptt == RIG_PTT_ON ? 1 : 0;
|
|
|
|
retval = icom_transaction (rig, C_CTL_PTT, S_PTT, pttbuf, 1,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_ptt: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_ptt
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, ptt!=NULL
|
|
*/
|
|
int icom_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
|
|
{
|
|
unsigned char pttbuf[MAXFRAMELEN];
|
|
int ptt_len, retval;
|
|
|
|
retval = icom_transaction (rig, C_CTL_PTT, S_PTT, NULL, 0,
|
|
pttbuf, &ptt_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* freqbuf should contain Cn,Sc,Data area
|
|
*/
|
|
ptt_len -= 2;
|
|
if (ptt_len != 1) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_ptt: wrong frame len=%d\n",
|
|
ptt_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
*ptt = pttbuf[2] == 1 ? RIG_PTT_ON : RIG_PTT_OFF;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_dcd
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, ptt!=NULL
|
|
*/
|
|
int icom_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd)
|
|
{
|
|
unsigned char dcdbuf[MAXFRAMELEN];
|
|
int dcd_len, retval;
|
|
int icom_val;
|
|
|
|
retval = icom_transaction (rig, C_RD_SQSM, S_SQL, NULL, 0,
|
|
dcdbuf, &dcd_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* freqbuf should contain Cn,Data area
|
|
*/
|
|
dcd_len -= 2;
|
|
if (dcd_len != 2) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_dcd: wrong frame len=%d\n",
|
|
dcd_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
/*
|
|
* The result is a 3 digit BCD, but in *big endian* order: 0000..0255
|
|
* (from_bcd is little endian)
|
|
*/
|
|
icom_val = from_bcd_be(dcdbuf+2, dcd_len*2);
|
|
/*
|
|
* 0x00=sql closed, 0x01=sql open
|
|
*
|
|
* TODO: replace icom_val by dcdbuf[2] ?
|
|
*/
|
|
*dcd = (icom_val==0x01) ? RIG_DCD_ON : RIG_DCD_OFF;
|
|
|
|
return RIG_OK;
|
|
}
|
|
/*
|
|
* icom_set_rptr_shift
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t rptr_shift)
|
|
{
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
int rptr_sc;
|
|
|
|
switch (rptr_shift) {
|
|
case RIG_RPT_SHIFT_NONE:
|
|
rptr_sc = S_DUP_OFF; /* Simplex mode */
|
|
break;
|
|
case RIG_RPT_SHIFT_MINUS:
|
|
rptr_sc = S_DUP_M; /* Duplex - mode */
|
|
break;
|
|
case RIG_RPT_SHIFT_PLUS:
|
|
rptr_sc = S_DUP_P; /* Duplex + mode */
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported shift %d", rptr_shift);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, C_CTL_SPLT, rptr_sc, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_rptr_shift: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_get_rptr_shift
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, rptr_shift!=NULL
|
|
* will not work for IC-746 Pro
|
|
* NOTE: seems not to work (tested on IC-706MkIIG), please report --SF
|
|
*/
|
|
int icom_get_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t *rptr_shift)
|
|
{
|
|
unsigned char rptrbuf[MAXFRAMELEN];
|
|
int rptr_len, retval;
|
|
|
|
retval = icom_transaction (rig, C_CTL_SPLT, -1, NULL, 0,
|
|
rptrbuf, &rptr_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* rptrbuf should contain Cn,Sc
|
|
*/
|
|
rptr_len--;
|
|
if (rptr_len != 1) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_rptr_shift: wrong frame len=%d\n",
|
|
rptr_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
switch (rptrbuf[1]) {
|
|
case S_DUP_OFF:
|
|
*rptr_shift = RIG_RPT_SHIFT_NONE; /* Simplex mode */
|
|
break;
|
|
case S_DUP_M:
|
|
*rptr_shift = RIG_RPT_SHIFT_MINUS; /* Duples - mode */
|
|
break;
|
|
case S_DUP_P:
|
|
*rptr_shift = RIG_RPT_SHIFT_PLUS; /* Duplex + mode */
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported shift %d", rptrbuf[1]);
|
|
return -RIG_EPROTO;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_rptr_offs
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t rptr_offs)
|
|
{
|
|
unsigned char offsbuf[MAXFRAMELEN],ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
|
|
/*
|
|
* Icoms are using a 100Hz unit (at least on 706MKIIg) -- SF
|
|
*/
|
|
to_bcd(offsbuf, rptr_offs/100, OFFS_LEN*2);
|
|
|
|
retval = icom_transaction (rig, C_SET_OFFS, -1, offsbuf, OFFS_LEN,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_rptr_offs: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_get_rptr_offs
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, rptr_offs!=NULL
|
|
*/
|
|
int icom_get_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t *rptr_offs)
|
|
{
|
|
unsigned char offsbuf[MAXFRAMELEN];
|
|
int offs_len, retval;
|
|
|
|
|
|
retval = icom_transaction (rig, C_RD_OFFS, -1, NULL, 0,
|
|
offsbuf, &offs_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* offsbuf should contain Cn
|
|
*/
|
|
offs_len--;
|
|
if (offs_len != OFFS_LEN) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_rptr_offs: "
|
|
"wrong frame len=%d\n", offs_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
/*
|
|
* Icoms are using a 100Hz unit (at least on 706MKIIg) -- SF
|
|
*/
|
|
*rptr_offs = from_bcd(offsbuf+1, offs_len*2)*100;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_split_freq
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL,
|
|
* icom_set_vfo,icom_set_freq works for this rig
|
|
* FIXME: status
|
|
*
|
|
* Assumes also that the current VFO is the rx VFO.
|
|
*/
|
|
int icom_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq)
|
|
{
|
|
int status;
|
|
|
|
/* This method works also in memory mode(RIG_VFO_MEM) */
|
|
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_freq(rig, RIG_VFO_CURR, tx_freq);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_B);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_freq(rig, RIG_VFO_CURR, tx_freq);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_A);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* icom_get_split_freq
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, rx_freq!=NULL, tx_freq!=NULL
|
|
* icom_set_vfo,icom_get_freq works for this rig
|
|
* FIXME: status
|
|
*/
|
|
int icom_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq)
|
|
{
|
|
int status;
|
|
|
|
/* This method works also in memory mode(RIG_VFO_MEM) */
|
|
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_get_freq(rig, RIG_VFO_CURR, tx_freq);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_B);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_get_freq(rig, RIG_VFO_CURR, tx_freq);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_A);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* icom_set_split_mode
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL,
|
|
* icom_set_vfo,icom_set_mode works for this rig
|
|
* FIXME: status
|
|
*/
|
|
int icom_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width)
|
|
{
|
|
int status;
|
|
|
|
/* This method works also in memory mode(RIG_VFO_MEM) */
|
|
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_B);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_A);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* icom_get_split_mode
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL,
|
|
* rx_mode!=NULL, rx_width!=NULL, tx_mode!=NULL, tx_width!=NULL
|
|
* icom_set_vfo,icom_get_mode works for this rig
|
|
* FIXME: status
|
|
*/
|
|
int icom_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode, pbwidth_t *tx_width)
|
|
{
|
|
int status;
|
|
|
|
/* This method works also in memory mode(RIG_VFO_MEM) */
|
|
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_get_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_B);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_get_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
status = icom_set_vfo(rig, RIG_VFO_A);
|
|
if (status != RIG_OK)
|
|
return status;
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_split
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
|
|
{
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
int split_sc;
|
|
|
|
|
|
switch (split) {
|
|
case RIG_SPLIT_OFF:
|
|
split_sc = S_SPLT_OFF;
|
|
break;
|
|
case RIG_SPLIT_ON:
|
|
split_sc = S_SPLT_ON;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"%s: Unsupported split %d", __FUNCTION__, split);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, C_CTL_SPLT, split_sc, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_split: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_split_vfo
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, split!=NULL
|
|
*/
|
|
int icom_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
|
|
{
|
|
unsigned char splitbuf[MAXFRAMELEN];
|
|
int split_len, retval;
|
|
|
|
retval = icom_transaction (rig, C_CTL_SPLT, -1, NULL, 0,
|
|
splitbuf, &split_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* splitbuf should contain Cn,Sc
|
|
*/
|
|
split_len--;
|
|
if (split_len != 1) {
|
|
rig_debug(RIG_DEBUG_ERR,"%s: wrong frame len=%d\n",
|
|
__FUNCTION__, split_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
switch (splitbuf[1]) {
|
|
case S_SPLT_OFF:
|
|
*split = RIG_SPLIT_OFF;
|
|
break;
|
|
case S_SPLT_ON:
|
|
*split = RIG_SPLIT_ON;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported split %d", splitbuf[1]);
|
|
return -RIG_EPROTO;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_mem_get_split_vfo
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, split!=NULL
|
|
*/
|
|
int icom_mem_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
|
|
{
|
|
int retval;
|
|
|
|
/* this hacks works only when in memory mode
|
|
* I have no clue how to detect split in regular VFO mode
|
|
*/
|
|
if (rig->state.current_vfo != RIG_VFO_MEM)
|
|
return -RIG_ENAVAIL;
|
|
|
|
retval = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
if (retval == RIG_OK) {
|
|
*split = RIG_SPLIT_ON;
|
|
/* get it back to normal */
|
|
retval = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
|
|
} else if (retval == -RIG_ERJCTED) {
|
|
*split = RIG_SPLIT_OFF;
|
|
} else {
|
|
/* this is really an error! */
|
|
return retval;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_ts
|
|
* Assumes rig!=NULL, rig->caps->priv!=NULL
|
|
*/
|
|
int icom_set_ts(RIG *rig, vfo_t vfo, shortfreq_t ts)
|
|
{
|
|
const struct icom_priv_caps *priv_caps;
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int i, ack_len=sizeof(ackbuf), retval;
|
|
int ts_sc = 0;
|
|
|
|
priv_caps = (const struct icom_priv_caps*)rig->caps->priv;
|
|
|
|
for (i=0; i<TSLSTSIZ; i++) {
|
|
if (priv_caps->ts_sc_list[i].ts == ts) {
|
|
ts_sc = priv_caps->ts_sc_list[i].sc;
|
|
break;
|
|
}
|
|
}
|
|
if (i >= TSLSTSIZ)
|
|
return -RIG_EINVAL; /* not found, unsupported */
|
|
|
|
retval = icom_transaction (rig, C_SET_TS, ts_sc, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_ts: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_ts
|
|
* Assumes rig!=NULL, rig->caps->priv!=NULL, ts!=NULL
|
|
* NOTE: seems not to work (tested on IC-706MkIIG), please report --SF Not available on 746pro
|
|
*/
|
|
int icom_get_ts(RIG *rig, vfo_t vfo, shortfreq_t *ts)
|
|
{
|
|
const struct icom_priv_caps *priv_caps;
|
|
unsigned char tsbuf[MAXFRAMELEN];
|
|
int ts_len, i, retval;
|
|
|
|
priv_caps = (const struct icom_priv_caps*)rig->caps->priv;
|
|
|
|
retval = icom_transaction (rig, C_SET_TS, -1, NULL, 0, tsbuf, &ts_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* tsbuf should contain Cn,Sc
|
|
*/
|
|
ts_len--;
|
|
if (ts_len != 1) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_ts: wrong frame len=%d\n",
|
|
ts_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
for (i=0; i<TSLSTSIZ; i++) {
|
|
if (priv_caps->ts_sc_list[i].sc == tsbuf[1]) {
|
|
*ts = priv_caps->ts_sc_list[i].ts;
|
|
break;
|
|
}
|
|
}
|
|
if (i >= TSLSTSIZ)
|
|
return -RIG_EPROTO; /* not found, unsupported */
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_func
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
|
|
{
|
|
unsigned char fctbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int fct_len, acklen, retval;
|
|
int fct_cn, fct_sc; /* Command Number, Subcommand */
|
|
|
|
/*
|
|
* except for IC-R8500
|
|
*/
|
|
fctbuf[0] = status? 0x01:0x00;
|
|
fct_len = rig->caps->rig_model == RIG_MODEL_ICR8500 ? 0 : 1;
|
|
|
|
/* Optimize:
|
|
* sort the switch cases with the most frequent first
|
|
*/
|
|
switch (func) {
|
|
case RIG_FUNC_FAGC:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_AGC;
|
|
/* note: should it be a LEVEL only, and no func? --SF */
|
|
if (status != 0)
|
|
fctbuf[0] = 0x03; /* default to 0x03 in IC746 pro super-fast */
|
|
else
|
|
fctbuf[0] = 0x02;
|
|
break;
|
|
case RIG_FUNC_NB:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_NB;
|
|
break;
|
|
case RIG_FUNC_COMP:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_COMP;
|
|
break;
|
|
case RIG_FUNC_VOX:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_VOX;
|
|
break;
|
|
case RIG_FUNC_TONE: /* repeater tone */
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_TONE;
|
|
break;
|
|
case RIG_FUNC_TSQL:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_TSQL;
|
|
break;
|
|
case RIG_FUNC_SBKIN:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_BKIN;
|
|
if (status != 0)
|
|
fctbuf[0] = 0x01;
|
|
else
|
|
fctbuf[0] = 0x00;
|
|
break;
|
|
case RIG_FUNC_FBKIN:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_BKIN;
|
|
if (status != 0)
|
|
fctbuf[0] = 0x02;
|
|
else
|
|
fctbuf[0] = 0x00;
|
|
break;
|
|
case RIG_FUNC_ANF:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_ANF;
|
|
break;
|
|
case RIG_FUNC_NR:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_NR;
|
|
break;
|
|
case RIG_FUNC_APF:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_APF;
|
|
break;
|
|
case RIG_FUNC_MON:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_MON;
|
|
break;
|
|
case RIG_FUNC_MN:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_MN;
|
|
break;
|
|
case RIG_FUNC_RF:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_RF;
|
|
break;
|
|
case RIG_FUNC_VSC:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_VSC;
|
|
break;
|
|
case RIG_FUNC_AFC: /* IC-910H */
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_AFC;
|
|
break;
|
|
case RIG_FUNC_SATMODE: /* IC-910H */
|
|
fct_cn = C_CTL_MEM;
|
|
fct_sc = S_MEM_SATMODE;
|
|
break;
|
|
case RIG_FUNC_SCOPE: /* IC-910H */
|
|
fct_cn = C_CTL_MEM;
|
|
fct_sc = S_MEM_BANDSCOPE;
|
|
break;
|
|
case RIG_FUNC_RESUME: /* IC-910H & IC-746-Pro*/
|
|
fct_cn = C_CTL_SCAN;
|
|
fct_sc = status ? S_SCAN_RSMON : S_SCAN_RSMOFF;
|
|
fct_len = 0;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported set_func %d", func);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction(rig, fct_cn, fct_sc, fctbuf, fct_len,
|
|
ackbuf, &acklen);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (acklen != 1) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_func: wrong frame len=%d\n",
|
|
acklen);
|
|
return -RIG_EPROTO;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_func
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
* FIXME: IC8500 and no-sc, any support?
|
|
*/
|
|
int icom_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
|
|
{
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
int fct_cn, fct_sc; /* Command Number, Subcommand */
|
|
|
|
/* Optimize:
|
|
* sort the switch cases with the most frequent first
|
|
*/
|
|
switch (func) {
|
|
case RIG_FUNC_FAGC:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_AGC; /* default to 0x01=slow 0x03=super-fast */
|
|
break;
|
|
case RIG_FUNC_NB:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_NB;
|
|
break;
|
|
case RIG_FUNC_COMP:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_COMP;
|
|
break;
|
|
case RIG_FUNC_VOX:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_VOX;
|
|
break;
|
|
case RIG_FUNC_TONE: /* repeater tone */
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_TONE;
|
|
break;
|
|
case RIG_FUNC_TSQL:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_TSQL;
|
|
break;
|
|
case RIG_FUNC_SBKIN: /* returns 1 for semi and 2 for full adjusted below */
|
|
case RIG_FUNC_FBKIN:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_BKIN;
|
|
break;
|
|
case RIG_FUNC_ANF:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_ANF;
|
|
break;
|
|
case RIG_FUNC_NR:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_NR;
|
|
break;
|
|
case RIG_FUNC_APF:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_APF;
|
|
break;
|
|
case RIG_FUNC_MON:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_MON;
|
|
break;
|
|
case RIG_FUNC_MN:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_MN;
|
|
break;
|
|
case RIG_FUNC_RF:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_RF;
|
|
break;
|
|
case RIG_FUNC_VSC:
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_VSC;
|
|
break;
|
|
case RIG_FUNC_AFC: /* IC-910H */
|
|
fct_cn = C_CTL_FUNC;
|
|
fct_sc = S_FUNC_AFC;
|
|
break;
|
|
case RIG_FUNC_SATMODE: /* IC-910H */
|
|
fct_cn = C_CTL_MEM;
|
|
fct_sc = S_MEM_SATMODE;
|
|
break;
|
|
case RIG_FUNC_SCOPE: /* IC-910H */
|
|
fct_cn = C_CTL_MEM;
|
|
fct_sc = S_MEM_BANDSCOPE;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported get_func %d", func);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, fct_cn, fct_sc, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 3) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_func: wrong frame len=%d\n",
|
|
ack_len);
|
|
return -RIG_EPROTO;
|
|
}
|
|
if (func != RIG_FUNC_FBKIN)
|
|
*status = ackbuf[2];
|
|
else
|
|
*status = ackbuf[2] == 2 ? 1 : 0;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_parm
|
|
* Assumes rig!=NULL
|
|
These are very much rig specific and should probably be in rig files. These are for ICR75C only.
|
|
*/
|
|
int icom_set_parm(RIG *rig, setting_t parm, value_t val)
|
|
{
|
|
unsigned char prmbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), prm_len;
|
|
int prm_cn, prm_sc;
|
|
int icom_val;
|
|
int retval;
|
|
int min,hr,sec;
|
|
|
|
switch (parm) {
|
|
case RIG_PARM_ANN:
|
|
if ((val.i == RIG_ANN_FREQ) || (val.i == RIG_ANN_RXMODE)) {
|
|
prm_cn = C_CTL_ANN;
|
|
prm_sc = val.i;
|
|
prm_len = 0;
|
|
}
|
|
else {
|
|
if ((val.i == RIG_ANN_ENG)||(val.i == RIG_ANN_JAP)) {
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
prm_len = 2;
|
|
prmbuf[0] = S_PRM_LANG;
|
|
prmbuf[1] = (val.i == RIG_ANN_ENG ? 0 : 1);
|
|
}
|
|
else {
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported set_parm_ann %d\n", val.i);
|
|
return -RIG_EINVAL;
|
|
}
|
|
}
|
|
break;
|
|
case RIG_PARM_APO:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
hr = (float)val.i/60.0;
|
|
min = val.i - (hr*60);
|
|
prm_len = 3;
|
|
prmbuf[0] = S_PRM_SLPTM;
|
|
to_bcd_be(prmbuf+1, (long long)hr, 2);
|
|
to_bcd_be(prmbuf+2, (long long)min, 2);
|
|
break;
|
|
case RIG_PARM_BACKLIGHT:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
icom_val = val.f * 255;
|
|
prm_len = 3;
|
|
prmbuf[0] = S_PRM_BACKLT;
|
|
to_bcd_be(prmbuf+1, (long long)icom_val, (prm_len-1)*2);
|
|
break;
|
|
case RIG_PARM_BEEP:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
prm_len = 2;
|
|
prmbuf[0] = S_PRM_BEEP;
|
|
prmbuf[1] = val.i;
|
|
break;
|
|
case RIG_PARM_TIME:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
hr = (float)val.i/3600.0;
|
|
min = (float)(val.i - (hr*3600))/60.0;
|
|
sec = (val.i - (hr*3600) - (min*60));
|
|
prm_len = 4;
|
|
prmbuf[0] = S_PRM_TIME;
|
|
to_bcd_be(prmbuf+1, (long long)hr, 2);
|
|
to_bcd_be(prmbuf+2, (long long)min, 2);
|
|
to_bcd_be(prmbuf+3, (long long)sec, 2);
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported set_parm %d\n", parm);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction(rig, prm_cn, prm_sc, prmbuf, prm_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_parm: wrong frame len=%d\n",
|
|
ack_len);
|
|
return -RIG_EPROTO;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_parm
|
|
* Assumes rig!=NULL
|
|
*/
|
|
int icom_get_parm(RIG *rig, setting_t parm, value_t *val)
|
|
{
|
|
unsigned char prmbuf[MAXFRAMELEN], resbuf[MAXFRAMELEN];
|
|
int prm_len, res_len;
|
|
int prm_cn, prm_sc;
|
|
int icom_val;
|
|
int cmdhead;
|
|
int retval;
|
|
int min,hr,sec;
|
|
|
|
switch (parm) {
|
|
case RIG_PARM_APO:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
prm_len = 1;
|
|
prmbuf[0] = S_PRM_SLPTM;
|
|
break;
|
|
case RIG_PARM_BACKLIGHT:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
prm_len = 1;
|
|
prmbuf[0] = S_PRM_BACKLT;
|
|
break;
|
|
case RIG_PARM_BEEP:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
prm_len = 1;
|
|
prmbuf[0] = S_PRM_BEEP;
|
|
break;
|
|
case RIG_PARM_TIME:
|
|
prm_cn = C_CTL_MEM;
|
|
prm_sc = S_MEM_MODE_SLCT;
|
|
prm_len = 1;
|
|
prmbuf[0] = S_PRM_TIME;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported get_parm %d", parm);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, prm_cn, prm_sc, prmbuf, prm_len,
|
|
resbuf, &res_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* strbuf should contain Cn,Sc,[pn],Data area
|
|
*/
|
|
cmdhead = (prm_sc == -1) ? 1:3;
|
|
res_len -= cmdhead;
|
|
|
|
if (resbuf[0] != ACK && resbuf[0] != prm_cn) {
|
|
rig_debug(RIG_DEBUG_ERR,"%s: ack NG (%#.2x), "
|
|
"len=%d\n", __FUNCTION__,resbuf[0],res_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
switch (parm) {
|
|
case RIG_PARM_APO:
|
|
hr = from_bcd_be(resbuf+cmdhead, 2);
|
|
min = from_bcd_be(resbuf+cmdhead+1, 2);
|
|
icom_val = (hr*60)+min;
|
|
val->i = icom_val;
|
|
break;
|
|
case RIG_PARM_TIME:
|
|
hr = from_bcd_be(resbuf+cmdhead, 2);
|
|
min = from_bcd_be(resbuf+cmdhead+1, 2);
|
|
sec = from_bcd_be(resbuf+cmdhead+2, 2);
|
|
icom_val = (hr*3600)+(min*60)+sec;
|
|
val->i = icom_val;
|
|
break;
|
|
default:
|
|
icom_val = from_bcd_be(resbuf+cmdhead, res_len*2);
|
|
if (RIG_PARM_IS_FLOAT(parm))
|
|
val->f = (float)icom_val/255;
|
|
else
|
|
val->i = icom_val;
|
|
}
|
|
|
|
rig_debug(RIG_DEBUG_TRACE,"%s: %d %d %d %f\n",
|
|
__FUNCTION__, res_len, icom_val, val->i, val->f);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_ctcss_tone
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*
|
|
* Warning! This is untested stuff! May work at least on 756PRO and IC746.
|
|
* Please owners report to me <f4cfe@users.sourceforge.net>, thanks. --SF
|
|
Works for 746 pro and should work for 756 xx and 7800
|
|
*/
|
|
int icom_set_ctcss_tone(RIG *rig, vfo_t vfo, tone_t tone)
|
|
{
|
|
const struct rig_caps *caps;
|
|
unsigned char tonebuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int tone_len, ack_len=sizeof(ackbuf), retval;
|
|
int i;
|
|
|
|
caps = rig->caps;
|
|
|
|
/*
|
|
* I don't have documentation for this function,
|
|
* and I can't experiment (no hardware), so let's guess.
|
|
* Most probably, it might be the index of the CTCSS subaudible
|
|
* tone, and not the tone itself, starting from zero.
|
|
*
|
|
* Something in the range of 00..51, BCD big endian 4 nibbles
|
|
* Please someone let me know if it works this way. --SF
|
|
* No. sent directly as be nibbles with frequency same format as internal kh
|
|
*/
|
|
for (i = 0; caps->ctcss_list[i] != 0 && i<52; i++) {
|
|
if (caps->ctcss_list[i] == tone)
|
|
break;
|
|
}
|
|
if (caps->ctcss_list[i] != tone)
|
|
return -RIG_EINVAL;
|
|
|
|
tone_len = 1;
|
|
to_bcd_be(tonebuf, tone, tone_len*2);
|
|
|
|
retval = icom_transaction(rig, C_SET_TONE, S_TONE_RPTR,
|
|
tonebuf, tone_len, ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_ctcss_tone: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_ctcss_tone
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_get_ctcss_tone(RIG *rig, vfo_t vfo, tone_t *tone)
|
|
{
|
|
const struct rig_caps *caps;
|
|
unsigned char tonebuf[MAXFRAMELEN];
|
|
int tone_len, retval;
|
|
int i;
|
|
|
|
caps = rig->caps;
|
|
|
|
/*
|
|
* see icom_set_ctcss for discussion on the status!
|
|
*/
|
|
|
|
retval = icom_transaction(rig, C_SET_TONE, S_TONE_RPTR, NULL, 0,
|
|
tonebuf, &tone_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/* cn,sc,data*3 */
|
|
if (tone_len != 5) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_tone: ack NG (%#.2x), "
|
|
"len=%d\n", tonebuf[0], tone_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
tone_len -= 2;
|
|
*tone = from_bcd_be(tonebuf+2, tone_len*2);
|
|
|
|
/* check this tone exists. That's better than nothing. */
|
|
for (i = 0; caps->ctcss_list[i] != 0 && i<52; i++) {
|
|
if (caps->ctcss_list[i] == *tone)
|
|
return RIG_OK;
|
|
}
|
|
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_tone: CTCSS NG "
|
|
"(%#.2x)\n", tonebuf[2]);
|
|
return -RIG_EPROTO;
|
|
}
|
|
|
|
/*
|
|
* icom_set_ctcss_sql
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*
|
|
* Warning! This is untested stuff! May work at least on 756PRO and IC746.
|
|
* Please owners report to me <f4cfe@users.sourceforge.net>, thanks. --SF
|
|
*/
|
|
int icom_set_ctcss_sql(RIG *rig, vfo_t vfo, tone_t tone)
|
|
{
|
|
const struct rig_caps *caps;
|
|
unsigned char tonebuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int tone_len, ack_len=sizeof(ackbuf), retval;
|
|
int i;
|
|
|
|
caps = rig->caps;
|
|
|
|
/*
|
|
* see icom_set_ctcss for discussion on the untested status!
|
|
*/
|
|
|
|
for (i = 0; caps->ctcss_list[i] != 0 && i<52; i++) {
|
|
if (caps->ctcss_list[i] == tone)
|
|
break;
|
|
}
|
|
if (caps->ctcss_list[i] != tone)
|
|
return -RIG_EINVAL;
|
|
|
|
tone_len = 1;
|
|
to_bcd_be(tonebuf, tone, tone_len*2);
|
|
|
|
retval = icom_transaction(rig, C_SET_TONE, S_TONE_SQL,
|
|
tonebuf, tone_len, ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_ctcss_sql: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_ctcss_sql
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_get_ctcss_sql(RIG *rig, vfo_t vfo, tone_t *tone)
|
|
{
|
|
const struct rig_caps *caps;
|
|
unsigned char tonebuf[MAXFRAMELEN];
|
|
int tone_len, retval;
|
|
int i;
|
|
|
|
caps = rig->caps;
|
|
|
|
/*
|
|
* see icom_set_ctcss for discussion on the untested status!
|
|
*/
|
|
|
|
retval = icom_transaction(rig, C_SET_TONE, S_TONE_SQL, NULL, 0,
|
|
tonebuf, &tone_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (tone_len != 5) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_sql: ack NG (%#.2x), "
|
|
"len=%d\n", tonebuf[0], tone_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
tone_len -= 2;
|
|
*tone = from_bcd_be(tonebuf+2, tone_len*2);
|
|
|
|
/* check this tone exists. That's better than nothing. */
|
|
for (i = 0; caps->ctcss_list[i] != 0 && i<52; i++) {
|
|
if (caps->ctcss_list[i] == *tone)
|
|
return RIG_OK;
|
|
}
|
|
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_sql: CTCSS NG "
|
|
"(%#.2x)\n", tonebuf[2]);
|
|
return -RIG_EPROTO;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_powerstat
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_powerstat(RIG *rig, powerstat_t status)
|
|
{
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
int pwr_sc;
|
|
|
|
pwr_sc = status==RIG_POWER_ON ? S_PWR_ON:S_PWR_OFF;
|
|
|
|
retval = icom_transaction(rig, C_SET_PWR, pwr_sc, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_powerstat: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_powerstat
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_get_powerstat(RIG *rig, powerstat_t *status)
|
|
{
|
|
unsigned char cmdbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int cmd_len, ack_len=sizeof(ackbuf), retval;
|
|
|
|
/* r75 has no way to get power status, so fake it */
|
|
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
|
|
/* getting the mode doesn't work if a memory is blank */
|
|
/* so use one of the more innculous 'set mode' commands instead */
|
|
cmd_len = 1;
|
|
cmdbuf[0] = S_PRM_TIME;
|
|
retval = icom_transaction(rig, C_CTL_MEM, S_MEM_MODE_SLCT,
|
|
cmdbuf, cmd_len, ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
*status = ((ack_len == 6)&&(ackbuf[0] == C_CTL_MEM)) ?
|
|
RIG_POWER_ON : RIG_POWER_OFF;
|
|
}
|
|
else {
|
|
retval = icom_transaction(rig, C_SET_PWR, -1, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_powerstat: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
*status = ackbuf[1] == S_PWR_ON ? RIG_POWER_ON : RIG_POWER_OFF;
|
|
}
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_set_mem
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_mem(RIG *rig, vfo_t vfo, int ch)
|
|
{
|
|
unsigned char membuf[2];
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
int chan_len;
|
|
|
|
chan_len = ch < 100 ? 1 : 2;
|
|
|
|
to_bcd_be(membuf, ch, chan_len*2);
|
|
retval = icom_transaction (rig, C_SET_MEM, -1, membuf, chan_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_mem: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_bank
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_bank(RIG *rig, vfo_t vfo, int bank)
|
|
{
|
|
unsigned char bankbuf[2];
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
|
|
to_bcd_be(bankbuf, bank, BANK_NB_LEN*2);
|
|
retval = icom_transaction (rig, C_SET_MEM, S_BANK,
|
|
bankbuf, CHAN_NB_LEN, ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_bank: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_set_ant
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_set_ant(RIG * rig, vfo_t vfo, ant_t ant)
|
|
{
|
|
unsigned char antarg;
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval, i_ant;
|
|
int ant_len;
|
|
|
|
/*
|
|
* FIXME: IC-756*
|
|
*/
|
|
i_ant = ant == RIG_ANT_1 ? 0: 1;
|
|
|
|
antarg = 0;
|
|
ant_len = (rig->caps->rig_model == RIG_MODEL_ICR75) ? 0 : 1;
|
|
retval = icom_transaction (rig, C_CTL_ANT, i_ant,
|
|
&antarg, ant_len, ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_ant: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_get_ant
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
* only meaningfull for HF
|
|
*/
|
|
int icom_get_ant(RIG *rig, vfo_t vfo, ant_t *ant)
|
|
{
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int ack_len=sizeof(ackbuf), retval;
|
|
|
|
retval = icom_transaction(rig, C_CTL_ANT, -1, NULL, 0,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 2 || ackbuf[0] != C_CTL_ANT) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_get_ant: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
*ant = ackbuf[1] == 0 ? RIG_ANT_1 : RIG_ANT_2;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* icom_vfo_op, Mem/VFO operation
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
|
|
{
|
|
unsigned char mvbuf[MAXFRAMELEN];
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int mv_len, ack_len=sizeof(ackbuf), retval;
|
|
int mv_cn, mv_sc;
|
|
|
|
mv_len = 0;
|
|
|
|
switch(op) {
|
|
case RIG_OP_CPY:
|
|
mv_cn = C_SET_VFO;
|
|
mv_sc = S_BTOA;
|
|
break;
|
|
case RIG_OP_XCHG:
|
|
mv_cn = C_SET_VFO;
|
|
mv_sc = S_XCHNG;
|
|
break;
|
|
#if 0
|
|
case RIG_OP_DUAL_OFF:
|
|
mv_cn = C_SET_VFO;
|
|
mv_sc = S_DUAL_OFF;
|
|
break;
|
|
case RIG_OP_DUAL_ON:
|
|
mv_cn = C_SET_VFO;
|
|
mv_sc = S_DUAL_ON;
|
|
break;
|
|
#endif
|
|
case RIG_OP_FROM_VFO:
|
|
mv_cn = C_WR_MEM;
|
|
mv_sc = -1;
|
|
break;
|
|
case RIG_OP_TO_VFO:
|
|
mv_cn = C_MEM2VFO;
|
|
mv_sc = -1;
|
|
break;
|
|
case RIG_OP_MCL:
|
|
mv_cn = C_CLR_MEM;
|
|
mv_sc = -1;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported mem/vfo op %#x", op);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, mv_cn, mv_sc, mvbuf, mv_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
if (op != RIG_OP_XCHG)
|
|
rig_debug(RIG_DEBUG_ERR,"icom_vfo_op: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_scan, scan operation
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
int icom_scan(RIG *rig, vfo_t vfo, scan_t scan, int ch)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char scanbuf[MAXFRAMELEN];
|
|
unsigned char ackbuf[MAXFRAMELEN];
|
|
int scan_len, ack_len=sizeof(ackbuf), retval;
|
|
int scan_cn, scan_sc;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
scan_len = 0;
|
|
scan_cn = C_CTL_SCAN;
|
|
|
|
switch(scan) {
|
|
case RIG_SCAN_STOP:
|
|
scan_sc = S_SCAN_STOP;
|
|
break;
|
|
case RIG_SCAN_MEM:
|
|
retval = icom_set_vfo(rig, RIG_VFO_MEM);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
scan_sc = S_SCAN_START;
|
|
break;
|
|
case RIG_SCAN_SLCT:
|
|
retval = icom_set_vfo(rig, RIG_VFO_MEM);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
scan_sc = S_SCAN_START;
|
|
break;
|
|
case RIG_SCAN_PRIO:
|
|
case RIG_SCAN_PROG:
|
|
/* TODO: for SCAN_PROG, check this is an edge chan */
|
|
/* BTW, I'm wondering if this is possible with CI-V */
|
|
retval = icom_set_mem(rig, RIG_VFO_CURR, ch);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
retval = icom_set_vfo(rig, RIG_VFO_VFO);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
scan_sc = S_SCAN_START;
|
|
break;
|
|
case RIG_SCAN_DELTA:
|
|
scan_sc = S_SCAN_DELTA; /* TODO: delta-f support */
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported scan %#x", scan);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, scan_cn, scan_sc, scanbuf, scan_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_scan: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* icom_decode is called by sa_sigio, when some asynchronous
|
|
* data has been received from the rig
|
|
*/
|
|
int icom_decode_event(RIG *rig)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char buf[MAXFRAMELEN];
|
|
int frm_len;
|
|
freq_t freq;
|
|
rmode_t mode;
|
|
pbwidth_t width;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "icom: icom_decode called\n");
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
frm_len = read_icom_frame(&rs->rigport, buf);
|
|
|
|
if (frm_len == -RIG_ETIMEOUT)
|
|
rig_debug(RIG_DEBUG_VERBOSE, "icom: icom_decode got a timeout before the first character\n");
|
|
|
|
if (frm_len < 0)
|
|
return frm_len;
|
|
|
|
switch (buf[frm_len-1])
|
|
{
|
|
case COL:
|
|
rig_debug(RIG_DEBUG_VERBOSE, "icom: icom_decode saw a collision\n");
|
|
/* Collision */
|
|
return -RIG_BUSBUSY;
|
|
case FI:
|
|
/* Ok, normal frame */
|
|
break;
|
|
default:
|
|
/* Timeout after reading at least one character */
|
|
/* Problem on ci-v bus? */
|
|
return -RIG_EPROTO;
|
|
}
|
|
|
|
if (buf[3] != BCASTID && buf[3] != priv->re_civ_addr) {
|
|
rig_debug(RIG_DEBUG_WARN, "icom_decode: CI-V %#x called for %#x!\n",
|
|
priv->re_civ_addr, buf[3]);
|
|
}
|
|
|
|
/*
|
|
* the first 2 bytes must be 0xfe
|
|
* the 3rd one the emitter
|
|
* the 4rd one 0x00 since this is transceive mode
|
|
* then the command number
|
|
* the rest is data
|
|
* and don't forget one byte at the end for the EOM
|
|
*/
|
|
switch (buf[4]) {
|
|
case C_SND_FREQ:
|
|
/*
|
|
* TODO: the freq length might be less than 4 or 5 bytes
|
|
* on older rigs!
|
|
*/
|
|
if (rig->callbacks.freq_event) {
|
|
freq = from_bcd(buf+5, (priv->civ_731_mode ? 4:5)*2);
|
|
return rig->callbacks.freq_event(rig, RIG_VFO_CURR, freq,
|
|
rig->callbacks.freq_arg);
|
|
} else
|
|
return -RIG_ENAVAIL;
|
|
break;
|
|
case C_SND_MODE:
|
|
if (rig->callbacks.mode_event) {
|
|
icom2rig_mode(rig, buf[5], buf[6], &mode, &width);
|
|
return rig->callbacks.mode_event(rig, RIG_VFO_CURR,
|
|
mode, width,
|
|
rig->callbacks.mode_arg);
|
|
} else
|
|
return -RIG_ENAVAIL;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_VERBOSE,"icom_decode: tranceive cmd "
|
|
"unsupported %#2.2x\n",buf[4]);
|
|
return -RIG_ENIMPL;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* init_icom is called by rig_probe_all (register.c)
|
|
*
|
|
* probe_icom reports all the devices on the CI-V bus.
|
|
*
|
|
* rig_model_t probeallrigs_icom(port_t *port, rig_probe_func_t cfunc, rig_ptr_t data)
|
|
*/
|
|
DECLARE_PROBERIG_BACKEND(icom)
|
|
{
|
|
unsigned char buf[MAXFRAMELEN], civ_addr, civ_id;
|
|
int frm_len, i;
|
|
int retval;
|
|
rig_model_t model = RIG_MODEL_NONE;
|
|
int rates[] = { 19200, 9600, 300, 0 };
|
|
int rates_idx;
|
|
|
|
if (!port)
|
|
return RIG_MODEL_NONE;
|
|
|
|
if (port->type.rig != RIG_PORT_SERIAL)
|
|
return RIG_MODEL_NONE;
|
|
|
|
port->write_delay = port->post_write_delay = 0;
|
|
port->retry = 1;
|
|
|
|
/*
|
|
* try for all different baud rates
|
|
*/
|
|
for (rates_idx = 0; rates[rates_idx]; rates_idx++) {
|
|
port->parm.serial.rate = rates[rates_idx];
|
|
port->timeout = 2*1000/rates[rates_idx] + 40;
|
|
|
|
retval = serial_open(port);
|
|
if (retval != RIG_OK)
|
|
return RIG_MODEL_NONE;
|
|
|
|
/*
|
|
* try all possible addresses on the CI-V bus
|
|
* FIXME: actualy, old rigs do not support C_RD_TRXID cmd!
|
|
* Try to be smart, and deduce model depending
|
|
* on freq range, return address, and
|
|
* available commands.
|
|
*/
|
|
for (civ_addr=0x01; civ_addr<=0x7f; civ_addr++) {
|
|
|
|
frm_len = make_cmd_frame((char *) buf, civ_addr, C_RD_TRXID, S_RD_TRXID,
|
|
NULL, 0);
|
|
|
|
serial_flush(port);
|
|
write_block(port, (char *) buf, frm_len);
|
|
|
|
/* read out the bytes we just sent
|
|
* TODO: check this is what we expect
|
|
*/
|
|
frm_len = read_icom_frame(port, buf);
|
|
|
|
/* this is the reply */
|
|
frm_len = read_icom_frame(port, buf);
|
|
|
|
/* timeout.. nobody's there */
|
|
if (frm_len <= 0)
|
|
continue;
|
|
|
|
if (buf[7] != FI && buf[5] != FI) {
|
|
/* protocol error, unexpected reply.
|
|
* is this a CI-V device?
|
|
*/
|
|
close(port->fd);
|
|
return RIG_MODEL_NONE;
|
|
} else if (buf[4] == NAK) {
|
|
/*
|
|
* this is an Icom, but it does not support transceiver ID
|
|
* try to guess from the return address
|
|
*/
|
|
civ_id = buf[3];
|
|
} else {
|
|
civ_id = buf[6];
|
|
}
|
|
|
|
for (i=0; icom_addr_list[i].model != RIG_MODEL_NONE; i++) {
|
|
if (icom_addr_list[i].re_civ_addr == civ_id) {
|
|
rig_debug(RIG_DEBUG_VERBOSE,"probe_icom: found %#x"
|
|
" at %#x\n", civ_id, buf[3]);
|
|
model = icom_addr_list[i].model;
|
|
if (cfunc)
|
|
(*cfunc)(port, model, data);
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* not found in known table....
|
|
* update icom_addr_list[]!
|
|
*/
|
|
if (icom_addr_list[i].model == RIG_MODEL_NONE)
|
|
rig_debug(RIG_DEBUG_WARN,"probe_icom: found unknown device "
|
|
"with CI-V ID %#x, please report to Hamlib "
|
|
"developers.\n", civ_id);
|
|
}
|
|
|
|
/*
|
|
* Try to identify OptoScan
|
|
*/
|
|
for (civ_addr=0x80; civ_addr<=0x8f; civ_addr++) {
|
|
|
|
frm_len = make_cmd_frame((char *) buf, civ_addr, C_CTL_MISC, S_OPTO_RDID,
|
|
NULL, 0);
|
|
|
|
serial_flush(port);
|
|
write_block(port, (char *) buf, frm_len);
|
|
|
|
/* read out the bytes we just sent
|
|
* TODO: check this is what we expect
|
|
*/
|
|
frm_len = read_icom_frame(port, buf);
|
|
|
|
/* this is the reply */
|
|
frm_len = read_icom_frame(port, buf);
|
|
|
|
/* timeout.. nobody's there */
|
|
if (frm_len <= 0)
|
|
continue;
|
|
|
|
/* wrong protocol? */
|
|
if (frm_len != 7 || buf[4] != C_CTL_MISC || buf[5] != S_OPTO_RDID)
|
|
continue;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "%s, found OptoScan%c%c%c, software version %d.%d, "
|
|
"interface version %d.%d, at %#x\n",
|
|
__FUNCTION__,
|
|
buf[2], buf[3], buf[4],
|
|
buf[5] >> 4, buf[5] & 0xf,
|
|
buf[6] >> 4, buf[6] & 0xf,
|
|
civ_addr);
|
|
|
|
if (buf[6] == '5' && buf[7] == '3' && buf[8] == '5')
|
|
model = RIG_MODEL_OS535;
|
|
else if (buf[6] == '4' && buf[7] == '5' && buf[8] == '6')
|
|
model = RIG_MODEL_OS456;
|
|
else
|
|
continue;
|
|
|
|
if (cfunc)
|
|
(*cfunc)(port, model, data);
|
|
break;
|
|
}
|
|
|
|
close(port->fd);
|
|
|
|
/*
|
|
* Assumes all the rigs on the bus are running at same speed.
|
|
* So if one at least has been found, none will be at lower speed.
|
|
*/
|
|
if (model != RIG_MODEL_NONE)
|
|
return model;
|
|
}
|
|
|
|
return model;
|
|
}
|
|
|
|
/*
|
|
* initrigs_icom is called by rig_backend_load
|
|
*/
|
|
DECLARE_INITRIG_BACKEND(icom)
|
|
{
|
|
rig_debug(RIG_DEBUG_VERBOSE, "icom: _init called\n");
|
|
|
|
rig_register(&ic703_caps);
|
|
rig_register(&ic706_caps);
|
|
rig_register(&ic706mkii_caps);
|
|
rig_register(&ic706mkiig_caps);
|
|
rig_register(&ic718_caps);
|
|
rig_register(&ic725_caps);
|
|
rig_register(&ic726_caps);
|
|
rig_register(&ic735_caps);
|
|
rig_register(&ic736_caps);
|
|
rig_register(&ic737_caps);
|
|
rig_register(&ic746_caps);
|
|
rig_register(&ic746pro_caps);
|
|
rig_register(&ic751_caps);
|
|
rig_register(&ic761_caps);
|
|
rig_register(&ic775_caps);
|
|
rig_register(&ic756_caps);
|
|
rig_register(&ic756pro_caps);
|
|
rig_register(&ic756pro2_caps);
|
|
rig_register(&ic756pro3_caps);
|
|
rig_register(&ic765_caps);
|
|
rig_register(&ic78_caps);
|
|
rig_register(&ic7800_caps);
|
|
rig_register(&ic7000_caps);
|
|
rig_register(&ic781_caps);
|
|
rig_register(&ic707_caps);
|
|
rig_register(&ic728_caps);
|
|
|
|
rig_register(&ic820h_caps);
|
|
rig_register(&ic821h_caps);
|
|
rig_register(&ic910_caps);
|
|
rig_register(&ic970_caps);
|
|
|
|
rig_register(&icr10_caps);
|
|
rig_register(&icr20_caps);
|
|
rig_register(&icr71_caps);
|
|
rig_register(&icr72_caps);
|
|
rig_register(&icr75_caps);
|
|
rig_register(&icr7000_caps);
|
|
rig_register(&icr7100_caps);
|
|
rig_register(&icr8500_caps);
|
|
rig_register(&icr9000_caps);
|
|
|
|
rig_register(&ic271_caps);
|
|
rig_register(&ic275_caps);
|
|
rig_register(&ic471_caps);
|
|
rig_register(&ic475_caps);
|
|
|
|
rig_register(&os535_caps);
|
|
rig_register(&os456_caps);
|
|
|
|
rig_register(&omnivip_caps);
|
|
|
|
rig_register(&id1_caps);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|