Hamlib/yaesu/ft736.c

528 wiersze
14 KiB
C

/*
* ft736.c - (C) Stephane Fillod 2004-2010
*
* This shared library provides an API for communicating
* via serial interface to an FT-736R using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include "hamlib/rig.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "tones.h"
#define FT736_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM)
#define FT736_VFOS (RIG_VFO_A)
/* Measurement by Ron W6FM using a signal generator.
* Raw values supposed to be between 0x30 and 0xad according to manual.
*/
#define FT736_STR_CAL { 3, { \
{ 0x1d, -54 }, /* S0 */ \
{ 0x54, 0 }, /* S9 */ \
{ 0x9d, 60 } /* +60 */ \
} }
struct ft736_priv_data {
split_t split;
};
/* Private helper function prototypes */
static int ft736_open(RIG *rig);
static int ft736_close(RIG *rig);
static int ft736_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int ft736_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
static int ft736_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo);
static int ft736_set_split_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int ft736_set_split_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
static int ft736_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
static int ft736_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd);
static int ft736_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
static int ft736_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t shift);
static int ft736_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs);
static int ft736_set_func(RIG *rig, vfo_t vfo, setting_t func, int status);
static int ft736_set_ctcss_tone (RIG *rig, vfo_t vfo, tone_t tone);
static int ft736_set_ctcss_sql (RIG *rig, vfo_t vfo, tone_t tone);
/* Some tones are present twice, the second value is
* higher Q (80), according to manual.
*/
static const tone_t ft736_ctcss_list[] = {
670, 719, 770, 825, 885, 948, 1000, 1035, 1072, 1109,
1148, 1188, 1230, 1273, 1318, 1365, 1413, 1462, 1514, 1567,
1622, 1679, 1738, 1799, 1862, 1928, 2035, 2107, 2181, 2257,
2336, 2418, 2503, 670, 719, 744, 770, 797, 825, 854,
885, 915, 0
};
#define FT736_CTCSS_NB 42
/*
* ft736 rigs capabilities.
*
* TODO:
* - AQS
*/
const struct rig_caps ft736_caps = {
.rig_model = RIG_MODEL_FT736R,
.model_name = "FT-736R",
.mfg_name = "Yaesu",
.version = "0.3",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE, /* RTS low, DTR high, and CTS low. */
.write_delay = 30, /* 50ms to be real safe */
.post_write_delay = 0,
.timeout = 2000,
.retry = 0,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_TONE|RIG_FUNC_TSQL,
.has_get_level = RIG_LEVEL_RAWSTR,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.vfo_ops = RIG_OP_NONE,
.ctcss_list = ft736_ctcss_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(50), MHz(53.99999), FT736_MODES, -1, -1, FT736_VFOS },
{MHz(144), MHz(145.99999), FT736_MODES, -1, -1, FT736_VFOS },
{MHz(430), MHz(439.99999), FT736_MODES, -1, -1, FT736_VFOS },
{MHz(1240), MHz(1299.99999), FT736_MODES, -1, -1, FT736_VFOS },
RIG_FRNG_END,
}, /* Region 1 rx ranges */
.tx_range_list1 = {
{MHz(50), MHz(53.99999), FT736_MODES, W(5), W(30), FT736_VFOS },
{MHz(144), MHz(145.99999), FT736_MODES, W(5), W(60), FT736_VFOS },
{MHz(430), MHz(439.99999), FT736_MODES, W(5), W(60), FT736_VFOS },
{MHz(1240), MHz(1299.99999), FT736_MODES, W(5), W(45), FT736_VFOS },
RIG_FRNG_END,
}, /* region 1 TX ranges */
.rx_range_list2 = {
{MHz(50), MHz(53.99999), FT736_MODES, -1, -1, FT736_VFOS },
{MHz(144), MHz(147.99999), FT736_MODES, -1, -1, FT736_VFOS },
{MHz(220), MHz(224.99999), FT736_MODES, -1, -1, FT736_VFOS },
{MHz(430), MHz(449.99999), FT736_MODES, -1, -1, FT736_VFOS },
{MHz(1240), MHz(1299.99999), FT736_MODES, -1, -1, FT736_VFOS },
RIG_FRNG_END,
}, /* Region 2 rx ranges */
.tx_range_list2 = {
{MHz(50), MHz(53.99999), FT736_MODES, W(5), W(30), FT736_VFOS },
{MHz(144), MHz(147.99999), FT736_MODES, W(5), W(60), FT736_VFOS },
{MHz(220), MHz(224.99999), FT736_MODES, W(5), W(60), FT736_VFOS },
{MHz(430), MHz(449.99999), FT736_MODES, W(5), W(60), FT736_VFOS },
{MHz(1240), MHz(1299.99999), FT736_MODES, W(5), W(45), FT736_VFOS },
RIG_FRNG_END,
}, /* region 2 TX ranges */
.tuning_steps = {
{FT736_MODES, Hz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR, kHz(2.2)},
{RIG_MODE_CW|RIG_MODE_CWR, Hz(600)},
{RIG_MODE_FM, kHz(12)},
{RIG_MODE_FM, kHz(8)},
RIG_FLT_END,
},
.str_cal = FT736_STR_CAL,
.rig_open = ft736_open,
.rig_close = ft736_close,
.set_freq = ft736_set_freq,
.set_mode = ft736_set_mode,
.set_ptt = ft736_set_ptt,
.get_dcd = ft736_get_dcd,
.get_level = ft736_get_level,
.set_split_vfo = ft736_set_split_vfo,
.set_split_freq = ft736_set_split_freq,
.set_split_mode = ft736_set_split_mode,
.set_rptr_shift = ft736_set_rptr_shift,
.set_rptr_offs = ft736_set_rptr_offs,
.set_func = ft736_set_func,
.set_ctcss_tone = ft736_set_ctcss_tone,
.set_ctcss_sql = ft736_set_ctcss_sql,
};
/*
* ft736_open routine
*
*/
int ft736_open(RIG *rig)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x00};
struct ft736_priv_data *priv;
int ret;
rig_debug(RIG_DEBUG_TRACE, "%s called\n",__FUNCTION__);
priv = (struct ft736_priv_data*)malloc(sizeof(struct ft736_priv_data));
if (!priv)
return -RIG_ENOMEM;
priv->split = RIG_SPLIT_OFF;
rig->state.priv = priv;
/* send Ext Cntl ON: Activate CAT */
ret = write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
if (ret != RIG_OK)
free(priv);
return ret;
}
int ft736_close(RIG *rig)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x80, 0x80, 0x80, 0x80, 0x80};
rig_debug(RIG_DEBUG_TRACE, "%s called\n",__FUNCTION__);
free(rig->state.priv);
/* send Ext Cntl OFF: Deactivate CAT */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x01};
struct ft736_priv_data *priv = (struct ft736_priv_data *)rig->state.priv;
if (priv->split == RIG_SPLIT_ON)
cmd[4] = 0x1e;
/* store bcd format in cmd (MSB) */
to_bcd_be(cmd,freq/10,8);
/* special case for 1.2GHz band */
if (freq > GHz(1.2))
cmd[0] = (cmd[0] & 0x0f) | 0xc0;
/* Frequency set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
#define MD_LSB 0x00
#define MD_USB 0x01
#define MD_CW 0x02
#define MD_CWR 0x03
#define MD_AM 0x04
#define MD_FM 0x08
int ft736_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x07};
unsigned char md;
struct ft736_priv_data *priv = (struct ft736_priv_data *)rig->state.priv;
if (priv->split == RIG_SPLIT_ON)
cmd[4] = 0x17;
/*
* translate mode from generic to ft736 specific
*/
switch(mode) {
case RIG_MODE_CW: md = MD_CW; break;
case RIG_MODE_CWR: md = MD_CWR; break;
case RIG_MODE_USB: md = MD_USB; break;
case RIG_MODE_LSB: md = MD_LSB; break;
case RIG_MODE_FM: md = MD_FM; break;
case RIG_MODE_AM: md = MD_AM; break;
default:
return -RIG_EINVAL; /* sorry, wrong MODE */
}
if (width != RIG_PASSBAND_NORMAL &&
width < rig_passband_normal(rig, mode)) {
md |= 0x80;
}
cmd[0] = md;
/* Mode set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x8e};
struct ft736_priv_data *priv = (struct ft736_priv_data *)rig->state.priv;
int ret;
/*
* this can be misleading as Yaesu call it "Full duplex"
* or "sat mode", and split Yaesu terms is repeater shift.
*/
cmd[4] = split == RIG_SPLIT_ON ? 0x0e : 0x8e;
ret = write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
if (ret == RIG_OK)
priv->split = split;
return ret;
}
int ft736_set_split_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x2e};
/* store bcd format in cmd (MSB) */
to_bcd_be(cmd,freq/10,8);
/* special case for 1.2GHz band */
if (freq > GHz(1.2))
cmd[0] = (cmd[0] & 0x0f) | 0xc0;
/* Frequency set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_split_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x27};
unsigned char md;
/*
* translate mode from generic to ft736 specific
*/
switch(mode) {
case RIG_MODE_CW: md = MD_CW; break;
case RIG_MODE_CWR: md = MD_CWR; break;
case RIG_MODE_USB: md = MD_USB; break;
case RIG_MODE_LSB: md = MD_LSB; break;
case RIG_MODE_FM: md = MD_FM; break;
case RIG_MODE_AM: md = MD_AM; break;
default:
return -RIG_EINVAL; /* sorry, wrong MODE */
}
if (width != RIG_PASSBAND_NORMAL &&
width < rig_passband_normal(rig, mode)) {
md |= 0x80;
}
cmd[0] = md;
/* Mode set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x88};
cmd[4] = ptt == RIG_PTT_ON ? 0x08 : 0x88;
/* Tx/Rx set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xe7};
int retval;
serial_flush(&rig->state.rigport);
retval = write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
if (retval < 0)
return retval;
/* read back the 1 byte */
retval = read_block(&rig->state.rigport, (char *) cmd, 5);
if (retval < 1) {
rig_debug(RIG_DEBUG_ERR,"%s: read squelch failed %d\n",
__FUNCTION__,retval);
return retval < 0 ? retval : -RIG_EIO;
}
*dcd = cmd[0] == 0x00 ? RIG_DCD_OFF : RIG_DCD_ON;
return RIG_OK;
}
int ft736_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xf7};
int retval;
if (level != RIG_LEVEL_RAWSTR)
return -RIG_EINVAL;
serial_flush(&rig->state.rigport);
/* send Test S-meter cmd to rig */
retval = write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
if (retval < 0)
return retval;
/* read back the 1 byte */
retval = read_block(&rig->state.rigport, (char *) cmd, 5);
if (retval < 1) {
rig_debug(RIG_DEBUG_ERR,"%s: read meter failed %d\n",
__FUNCTION__,retval);
return retval < 0 ? retval : -RIG_EIO;
}
val->i = cmd[0];
return RIG_OK;
}
int ft736_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t shift)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x89};
switch (shift) {
case RIG_RPT_SHIFT_NONE:
/* There's a typo in the manual.
* "Split Dir. simplex" is in fact 0x89, and 0x88 is PTT off!
*/
cmd[4] = 0x89;
break;
case RIG_RPT_SHIFT_MINUS:
cmd[4] = 0x09;
break;
case RIG_RPT_SHIFT_PLUS:
cmd[4] = 0x49;
break;
default:
return -RIG_EINVAL;
}
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xf9};
/* store bcd format in cmd (MSB) */
to_bcd_be(cmd,offs/10,8);
/* Offset set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x8a};
switch (func) {
case RIG_FUNC_TONE:
cmd[4] = status ? 0x4a : 0x8a;
break;
case RIG_FUNC_TSQL:
cmd[4] = status ? 0x0a : 0x8a;
break;
default:
return -RIG_EINVAL;
}
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_ctcss_tone (RIG *rig, vfo_t vfo, tone_t tone)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xfa};
int i;
for (i=0; i<FT736_CTCSS_NB; i++) {
if (ft736_ctcss_list[i] == tone)
break;
}
if (i == FT736_CTCSS_NB)
return -RIG_EINVAL;
cmd[0] = 0x3e - i;
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int ft736_set_ctcss_sql (RIG *rig, vfo_t vfo, tone_t tone)
{
/* same opcode as tone */
return ft736_set_ctcss_tone(rig, vfo, tone);
}