Hamlib/kenwood/ts680.c

196 wiersze
5.8 KiB
C

/*
* Hamlib Kenwood backend - TS680 description
* Copyright (c) 2000-2008 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <stdio.h>
#include "hamlib/rig.h"
#include "bandplan.h"
#include "kenwood.h"
#define TS680_ALL_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_CWR)
#define TS680_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_CWR)
#define TS680_AM_TX_MODES RIG_MODE_AM
#define TS680_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define TS680_ANTS (0)
/*
* vfo defines
*/
#define VFO_A '0'
#define VFO_B '1'
#define VFO_MEM '2'
static struct kenwood_priv_caps ts680_priv_caps = {
.cmdtrm = EOM_KEN,
};
static int ts680_set_vfo(RIG *rig, vfo_t vfo)
{
char cmdbuf[16];
char vfo_function;
switch (vfo) {
case RIG_VFO_VFO:
case RIG_VFO_A: vfo_function = VFO_A; break;
case RIG_VFO_B: vfo_function = VFO_B; break;
case RIG_VFO_MEM: vfo_function = VFO_MEM; break;
case RIG_VFO_CURR: return RIG_OK;
default:
rig_debug(RIG_DEBUG_ERR,"ts680_set_vfo: unsupported VFO %d\n",
vfo);
return -RIG_EINVAL;
}
sprintf(cmdbuf, "FN%c", vfo_function); /* The 680 and 140 need this to set the VFO on the radio */
return kenwood_simple_cmd(rig, cmdbuf);
}
/*
* ts680 rig capabilities.
* GW0VNR 09042006
*/
const struct rig_caps ts680s_caps = {
.rig_model = RIG_MODEL_TS680S,
.model_name = "TS-680S",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 9600, /* Rig only capable of 4800 baud from factory and 9k6 with jumper change */
.serial_data_bits = 8,
.serial_stop_bits = 2, /* TWO stop bits. This is correct. */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 300,
.retry = 3,
.has_get_func = RIG_FUNC_LOCK,
.has_set_func = RIG_FUNC_LOCK,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* No PARAMS controllable */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.preamp = { RIG_DBLST_END, }, /* Not controllable */
.attenuator = { RIG_DBLST_END, }, /* Not controllable */
.max_rit = kHz(1.2),
.max_xit = kHz(1.2),
.max_ifshift = Hz(0), /* Not controllable */
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 19, RIG_MTYPE_MEM },
{ 20, 30, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(50),kHz(34999),TS680_ALL_MODES,-1,-1,TS680_VFO},
{MHz(45),kHz(59999),TS680_ALL_MODES,-1,-1,TS680_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
FRQ_RNG_HF(1,TS680_OTHER_TX_MODES,W(5),W(100),TS680_VFO,TS680_ANTS),
FRQ_RNG_HF(1,TS680_AM_TX_MODES,W(2),W(40),TS680_VFO,TS680_ANTS),
FRQ_RNG_6m(1,TS680_OTHER_TX_MODES,W(1),W(10),TS680_VFO,TS680_ANTS),
FRQ_RNG_6m(1,TS680_AM_TX_MODES,W(1),W(4),TS680_VFO,TS680_ANTS),
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(50),kHz(34999),TS680_ALL_MODES,-1,-1,TS680_VFO},
{MHz(45),kHz(59999),TS680_ALL_MODES,-1,-1,TS680_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
FRQ_RNG_HF(2,TS680_OTHER_TX_MODES,W(5),W(100),TS680_VFO,TS680_ANTS),
FRQ_RNG_HF(2,TS680_AM_TX_MODES,W(2),W(40),TS680_VFO,TS680_ANTS),
FRQ_RNG_6m(2,TS680_OTHER_TX_MODES,W(1),W(10),TS680_VFO,TS680_ANTS),
FRQ_RNG_6m(2,TS680_AM_TX_MODES,W(1),W(4),TS680_VFO,TS680_ANTS),
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = { /* FIXME: Done */
{TS680_ALL_MODES,10},
{TS680_ALL_MODES,100},
{TS680_ALL_MODES,kHz(1)},
{TS680_ALL_MODES,kHz(5)},
{TS680_ALL_MODES,kHz(9)},
{TS680_ALL_MODES,kHz(10)},
{TS680_ALL_MODES,12500},
{TS680_ALL_MODES,kHz(20)},
{TS680_ALL_MODES,kHz(25)},
{TS680_ALL_MODES,kHz(100)},
{TS680_ALL_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_AM, kHz(2.2)},
{RIG_MODE_CWR, 600},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *)&ts680_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode_if,
.set_vfo = ts680_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_ptt = kenwood_set_ptt,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem_if,
.reset = kenwood_reset,
};
/*
* Function definitions below
*/