Hamlib/kenwood/r5000.c

165 wiersze
4.2 KiB
C

/*
* Hamlib Kenwood backend - R5000 description
* Copyright (c) 2000-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "kenwood.h"
#include "ic10.h"
#define R5000_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define R5000_FUNC_ALL (RIG_FUNC_LOCK)
#define R5000_LEVEL_ALL RIG_LEVEL_NONE
#define R5000_PARM_ALL (RIG_PARM_TIME)
#define R5000_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define R5000_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define R5000_SCAN_OPS (RIG_SCAN_VFO)
#define R5000_ANTS (RIG_ANT_1|RIG_ANT_2)
static struct kenwood_priv_caps r5000_priv_caps = {
.cmdtrm = EOM_KEN,
.if_len = 33,
};
/*
* R5000 rig capabilities, with IF-10 interface (like TS440).
*
* TODO: scan, get/set_channel, RIT
*/
const struct rig_caps r5000_caps = {
.rig_model = RIG_MODEL_R5000,
.model_name = "R-5000",
.mfg_name = "Kenwood",
.version = IC10_VER,
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 2,
.timeout = 400,
.retry = 3,
.has_get_func = R5000_FUNC_ALL,
.has_set_func = R5000_FUNC_ALL,
.has_get_level = R5000_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(R5000_LEVEL_ALL),
.has_get_parm = R5000_PARM_ALL,
.has_set_parm = RIG_PARM_SET(R5000_PARM_ALL),
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.vfo_ops = R5000_VFO_OPS,
.scan_ops = R5000_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { { 0, 99, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} }, /* TBC */
RIG_CHAN_END, },
.rx_range_list1 = {
{kHz(100),MHz(30),R5000_ALL_MODES,-1,-1,R5000_VFO},
{MHz(108),MHz(174),R5000_ALL_MODES,-1,-1,R5000_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100),MHz(30),R5000_ALL_MODES,-1,-1,R5000_VFO},
{MHz(108),MHz(174),R5000_ALL_MODES,-1,-1,R5000_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = { RIG_FRNG_END, }, /* tx range */
.tuning_steps = {
{R5000_ALL_MODES,10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *)&r5000_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.set_freq = ic10_set_freq,
.get_freq = ic10_get_freq,
.set_mode = ic10_set_mode,
.get_mode = ic10_get_mode,
.set_vfo = ic10_set_vfo,
.get_vfo = ic10_get_vfo,
.set_func = ic10_set_func,
.get_func = ic10_get_func,
.set_parm = ic10_set_parm,
.get_parm = ic10_get_parm,
.set_ant = ic10_set_ant,
.get_ant = ic10_get_ant,
.set_mem = ic10_set_mem,
.get_mem = ic10_get_mem,
.vfo_op = ic10_vfo_op,
.set_trn = ic10_set_trn,
.get_trn = ic10_get_trn,
.scan = ic10_scan,
.set_channel = ic10_set_channel,
.get_channel = ic10_get_channel,
.set_powerstat = ic10_set_powerstat,
.get_powerstat = ic10_get_powerstat,
.get_info = ic10_get_info,
.decode_event = ic10_decode_event,
};
/*
* Function definitions below
*/