Hamlib/rigs/tentec/rx320.c

181 wiersze
5.3 KiB
C

/*
* Hamlib TenTenc backend - RX-320 PC-Radio description
* Copyright (c) 2001-2008 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "tentec.h"
#define RX320_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)
/* TODO: LINEOUT */
#define RX320_LEVELS (RIG_LEVEL_AGC|RIG_LEVEL_AF|RIG_LEVEL_IF|RIG_LEVEL_RAWSTR|RIG_LEVEL_CWPITCH)
#define RX320_VFO (RIG_VFO_A)
/*
* Modified 11/18/2008, Josh Rovero, KK1D
* Calibration via comparison with JRC NRD-525.
* Highy non-linear....
*/
#define RX320_STR_CAL { 17, { \
{ 0, -60 }, \
{ 10, -50 }, \
{ 20, -40 }, \
{ 30, -30 }, \
{ 40, -20 }, \
{ 50, -15 }, \
{ 100, -10 }, \
{ 200, -5 }, \
{ 225, -3 }, \
{ 256, 0 }, \
{ 512, 1 }, \
{ 768, 3}, \
{ 1024, 4 }, \
{ 1280, 5 }, \
{ 2560, 10 }, \
{ 5120, 20 }, \
{ 10000, 30 }, \
} }
/*
* rx320 receiver capabilities.
*
* protocol is documented at
* http://www.tentec.com/rx320prg.zip
*
* TODO:
*/
const struct rig_caps rx320_caps =
{
RIG_MODEL(RIG_MODEL_RX320),
.model_name = "RX-320",
.mfg_name = "Ten-Tec",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_PCRECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
/*
* Added S-meter read support, Josh Rovero KK1D
* Only get_level is for RIG_LEVEL_RAWSTR
*/
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RX320_LEVELS,
.has_set_level = RIG_LEVEL_SET(RX320_LEVELS),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 10000 } },
[LVL_AF] = { .min = { .f = 0 }, .max = { .f = 1 }, .step = { .f = 1.0 / 64 } },
[LVL_IF] = { .min = { .i = -2000 }, .max = { .i = 2000 }, .step = { .i = 10} },
[LVL_CWPITCH] = { .min = { .i = 0}, .max = { .i = 2000 }, .step = { .i = 100} }
},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = kHz(2),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100), MHz(30), RX320_MODES, -1, -1, RX320_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100), MHz(30), RX320_MODES, -1, -1, RX320_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{RX320_MODES, 10}, /* FIXME: add other ts */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW, 300},
{RIG_MODE_CW, 450},
{RIG_MODE_CW, 600},
{RIG_MODE_CW, 750},
{RIG_MODE_CW, 900},
{RIG_MODE_CW, kHz(1.2)},
{RIG_MODE_SSB | RIG_MODE_CW, kHz(1.5)},
{RIG_MODE_SSB | RIG_MODE_CW, kHz(1.8)},
{RIG_MODE_SSB | RIG_MODE_CW, kHz(2.1)},
{RIG_MODE_AM | RIG_MODE_SSB | RIG_MODE_CW, kHz(2.4)},
{RIG_MODE_AM | RIG_MODE_SSB | RIG_MODE_CW, kHz(3.0)},
{RIG_MODE_AM | RIG_MODE_SSB | RIG_MODE_CW, kHz(4.2)},
{RIG_MODE_AM | RIG_MODE_SSB | RIG_MODE_CW, kHz(5.1)},
{RIG_MODE_AM | RIG_MODE_SSB | RIG_MODE_CW, kHz(6)},
{RIG_MODE_AM | RIG_MODE_SSB | RIG_MODE_CW, kHz(8)},
RIG_FLT_END,
},
.str_cal = RX320_STR_CAL,
.rig_init = tentec_init,
.rig_cleanup = tentec_cleanup,
.set_freq = tentec_set_freq,
.get_freq = tentec_get_freq,
.set_mode = tentec_set_mode,
.get_mode = tentec_get_mode,
.set_level = tentec_set_level,
.get_level = tentec_get_level,
.get_info = tentec_get_info,
};
/*
* Function definitions below
*/