Hamlib/rigs/icom/ic92d.c

257 wiersze
7.3 KiB
C

/*
* Hamlib CI-V backend - description of IC-E92D/IC-92AD and variations
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "icom.h"
#include "frame.h"
#include "icom_defs.h"
/* TODO: DV (GMSK 4.8 kbps voice) */
#define IC92D_MODES (RIG_MODE_FM)
#define IC92D_MODES_TX (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define IC92D_FUNC_ALL (RIG_FUNC_MUTE|RIG_FUNC_MON|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_LOCK|RIG_FUNC_AFC)
#define IC92D_LEVEL_ALL (RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_RFPOWER|RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_RAWSTR)
#define IC92D_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT)
#define IC92D_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define IC92D_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC92D_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM)
/*
* FIXME: real measurement
*/
#define IC92D_STR_CAL UNKNOWN_IC_STR_CAL
/* FIXME */
#define IC92D_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.rptr_offs = 1, \
.rptr_shift = 1, \
.funcs = IC92D_FUNC_ALL, \
.levels = RIG_LEVEL_SET(IC92D_LEVEL_ALL), \
}
static const char *ic92d_get_info(RIG *rig);
/* FIXME: tuning step sub-commands */
const struct ts_sc_list ic92d_ts_sc_list[] =
{
{ kHz(5), 0x00 },
{ kHz(6.25), 0x01 },
{ kHz(8.33), 0x02 },
{ kHz(9), 0x03 },
{ kHz(10), 0x04 },
{ kHz(12.5), 0x05 },
{ kHz(15), 0x06 },
{ kHz(20), 0x07 },
{ kHz(25), 0x08 },
{ kHz(30), 0x09 },
{ kHz(50), 0x0a },
{ kHz(100), 0x0b },
{ kHz(125), 0x0c },
{ kHz(200), 0x0d },
{ 0, 0 },
};
/*
*/
static const struct icom_priv_caps ic92d_priv_caps =
{
0x01, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic92d_ts_sc_list,
.serial_full_duplex = 1
};
const struct rig_caps ic92d_caps =
{
RIG_MODEL(RIG_MODEL_IC92D),
.model_name = "IC-92D", /* IC-E92D/IC-92AD */
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_HANDHELD,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 38400,
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC92D_FUNC_ALL,
.has_set_func = IC92D_FUNC_ALL,
.has_get_level = IC92D_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC92D_LEVEL_ALL),
.has_get_parm = IC92D_PARM_ALL,
.has_set_parm = IC92D_PARM_ALL,
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = full_dcs_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { 10, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC92D_VFO_OPS,
.scan_ops = IC92D_SCAN_OPS,
.transceive = RIG_TRN_OFF,
.bank_qty = 26,
.chan_desc_sz = 8,
/* The IC-E92D has a total 1304 memory channels with 26 memory banks.
* The VFO A has 800 regular channels, 50 scan edges and 2 call channels,
* while the VFO B has 400 regular, 50 scan edges and 2 call channels.
*/
.chan_list = {
{ 1, 1200, RIG_MTYPE_MEM, IC92D_MEM_CAP },
{ 1201, 1300, RIG_MTYPE_EDGE, IC92D_MEM_CAP },
{ 1301, 1304, RIG_MTYPE_CALL, IC92D_MEM_CAP },
RIG_CHAN_END,
},
/* IC-E92D */
.rx_range_list1 = {
{kHz(495), MHz(999.99), RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_WFM, -1, -1, RIG_VFO_A},
{MHz(118), MHz(174), RIG_MODE_AM | RIG_MODE_FM, -1, -1, RIG_VFO_B}, // TODO: MODE_DV
{MHz(350), MHz(470), RIG_MODE_AM | RIG_MODE_FM, -1, -1, RIG_VFO_B}, // TODO: MODE_DV
RIG_FRNG_END,
},
.tx_range_list1 = {
{MHz(144), MHz(146) - 1, IC92D_MODES_TX, mW(100), W(5), IC92D_VFO_ALL},
{MHz(430), MHz(440) - 1, IC92D_MODES_TX, mW(100), W(5), IC92D_VFO_ALL},
RIG_FRNG_END,
},
/* IC-92AD */
.rx_range_list2 = {
{kHz(495), MHz(999.99), RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_WFM, -1, -1, RIG_VFO_A},
{MHz(118), MHz(174), RIG_MODE_AM | RIG_MODE_FM, -1, -1, RIG_VFO_B}, // TODO: MODE_DV
{MHz(350), MHz(470), RIG_MODE_AM | RIG_MODE_FM, -1, -1, RIG_VFO_B}, // TODO: MODE_DV
RIG_FRNG_END,
},
.tx_range_list2 = {
{MHz(144), MHz(148) - 1, IC92D_MODES_TX, mW(100), W(5), IC92D_VFO_ALL},
{MHz(430), MHz(440) - 1, IC92D_MODES_TX, mW(100), W(5), IC92D_VFO_ALL},
RIG_FRNG_END,
},
.tuning_steps = {
{IC92D_MODES, kHz(5)},
{IC92D_MODES, kHz(6.25)},
{IC92D_MODES, kHz(8.33)},
{IC92D_MODES, kHz(9)},
{IC92D_MODES, kHz(10)},
{IC92D_MODES, 12500},
{IC92D_MODES, kHz(15)},
{IC92D_MODES, kHz(20)},
{IC92D_MODES, kHz(25)},
{IC92D_MODES, kHz(50)},
{IC92D_MODES, kHz(100)},
{IC92D_MODES, kHz(125)},
{IC92D_MODES, kHz(200)},
RIG_TS_END,
},
/* FIXME: mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_FM, kHz(12)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(9)}, /* N-FM & AM */
{RIG_MODE_WFM, kHz(230)},
RIG_FLT_END,
},
.str_cal = IC92D_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& ic92d_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.get_info = ic92d_get_info,
};
const char *ic92d_get_info(RIG *rig)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char ackbuf[16];
int ack_len, retval;
static char info[64];
rs = &rig->state;
priv = (struct icom_priv_data *)rs->priv;
// 018019fd
priv->re_civ_addr = 0x01;
retval = icom_transaction(rig, C_RD_TRXID, -1,
NULL, 0, ackbuf, &ack_len);
if (retval != RIG_OK)
{
return NULL;
}
if (ack_len <= 3)
{
rig_debug(RIG_DEBUG_ERR, "%s: ack NG (%#.2x), "
"len=%d\n", __func__, ackbuf[0], ack_len);
return NULL;
}
sprintf(info, "ID %02x%02x%02x\n", ackbuf[1], ackbuf[2], ackbuf[3]);
return info;
}