Hamlib/rigs/icom/ic7200.c

305 wiersze
10 KiB
C

/*
* Hamlib CI-V backend - description of IC-7200 and variations
* Adapted by J.Watson from IC-7000 code (c) 2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
/*
* 26Mar09: Corrected tuning steps and added data modes.
* 25Mar09: Initial release
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <hamlib/rig.h>
#include "token.h"
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "misc.h"
#include "bandplan.h"
/* AM Data mode needs adding - this would require one more mode 'RIG_MODE_PKTAM' to rig.h */
#define IC7200_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB)
#define IC7200_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB)
#define IC7200_NOT_TS_MODES (IC7200_ALL_RX_MODES &~IC7200_1HZ_TS_MODES)
#define IC7200_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC7200_AM_TX_MODES (RIG_MODE_AM)
#define IC7200_FUNCS (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_LOCK|RIG_FUNC_ARO|RIG_FUNC_TUNER)
#define IC7200_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_VOXGAIN|RIG_LEVEL_ANTIVOX|RIG_LEVEL_VOXDELAY|RIG_LEVEL_SWR|RIG_LEVEL_ALC|RIG_LEVEL_RFPOWER_METER|RIG_LEVEL_NB)
#define IC7200_VFOS (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define IC7200_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT|RIG_PARM_APO|RIG_PARM_TIME|RIG_PARM_BEEP)
#define IC7200_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL|RIG_OP_TUNE)
#define IC7200_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_PROG|RIG_SCAN_SLCT|RIG_SCAN_PRIO)
#define IC7200_ANTS (RIG_ANT_1) /* ant-1 is Hf-6m */
#define IC7200_STR_CAL { 3, \
{ \
{ 0, -54 }, \
{ 120, 0 }, \
{ 241, 60 } \
} }
#define IC7200_SWR_CAL { 5, \
{ \
{ 0, 1.0f }, \
{ 48, 1.5f }, \
{ 80, 2.0f }, \
{ 120, 3.0f }, \
{ 240, 6.0f } \
} }
#define IC7200_ALC_CAL { 2, \
{ \
{ 0, 0.0f }, \
{ 120, 1.0f } \
} }
#define IC7200_RFPOWER_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 143, 0.5f }, \
{ 213, 1.0f } \
} }
int ic7200_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
int ic7200_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
/*
* IC-7200 rig capabilities.
*
* TODO: complete command set (esp. the $1A bunch!) and testing..
*/
static const struct icom_priv_caps IC7200_priv_caps =
{
0x76, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic7200_ts_sc_list,
.agc_levels_present = 1,
.agc_levels = {
{ .level = RIG_AGC_OFF, .icom_level = 0 },
{ .level = RIG_AGC_FAST, .icom_level = 1 },
{ .level = RIG_AGC_SLOW, .icom_level = 2 },
{ .level = -1, .icom_level = 0 },
},
};
const struct rig_caps ic7200_caps =
{
RIG_MODEL(RIG_MODEL_IC7200),
.model_name = "IC-7200",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC7200_FUNCS,
.has_set_func = IC7200_FUNCS,
.has_get_level = IC7200_LEVELS,
.has_set_level = RIG_LEVEL_SET(IC7200_LEVELS),
.has_get_parm = IC7200_PARMS,
.has_set_parm = RIG_PARM_SET(IC7200_PARMS),
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } },
[LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } },
},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, }, /* FIXME: TBC it's a guess*/
.attenuator = { 20, RIG_DBLST_END, }, /* value taken from p.45 of manual*/
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC7200_VFO_OPS,
.scan_ops = IC7200_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 1,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 199, RIG_MTYPE_MEM },
{ 200, 201, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30), MHz(60), IC7200_ALL_RX_MODES, -1, -1, IC7200_VFOS}, RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1, IC7200_OTHER_TX_MODES, W(2), W(100), IC7200_VFOS, RIG_ANT_1),
FRQ_RNG_6m(1, IC7200_OTHER_TX_MODES, W(2), W(100), IC7200_VFOS, RIG_ANT_1),
FRQ_RNG_HF(1, IC7200_AM_TX_MODES, W(1), W(40), IC7200_VFOS, RIG_ANT_1), /* AM class */
FRQ_RNG_6m(1, IC7200_AM_TX_MODES, W(1), W(40), IC7200_VFOS, RIG_ANT_1), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = { {kHz(30), MHz(60), IC7200_ALL_RX_MODES, -1, -1, IC7200_VFOS}, RIG_FRNG_END, },
.tx_range_list2 = { /* needs the 5 mhz channels added */
FRQ_RNG_HF(2, IC7200_OTHER_TX_MODES, W(2), W(100), IC7200_VFOS, RIG_ANT_1),
FRQ_RNG_6m(2, IC7200_OTHER_TX_MODES, W(2), W(100), IC7200_VFOS, RIG_ANT_1),
FRQ_RNG_HF(2, IC7200_AM_TX_MODES, W(1), W(40), IC7200_VFOS, RIG_ANT_1), /* AM class */
FRQ_RNG_6m(2, IC7200_AM_TX_MODES, W(1), W(40), IC7200_VFOS, RIG_ANT_1), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC7200_1HZ_TS_MODES, 1},
{IC7200_NOT_TS_MODES, 10},
{IC7200_ALL_RX_MODES, Hz(100)},
{IC7200_ALL_RX_MODES, kHz(1)},
{IC7200_ALL_RX_MODES, kHz(5)},
{IC7200_ALL_RX_MODES, kHz(9)},
{IC7200_ALL_RX_MODES, kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! But duplication may speed up search. Put the most commonly used modes first! Remember these are defaults, with dsp rigs you can change them to anything you want except FM and WFM which are fixed */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_SSB, kHz(1.8)},
{RIG_MODE_SSB, kHz(3)},
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(500)},
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(250)},
{RIG_MODE_CW | RIG_MODE_CWR, kHz(1.2)},
{RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_AM, kHz(3)},
{RIG_MODE_AM, kHz(9)},
RIG_FLT_END,
},
.str_cal = IC7200_STR_CAL,
.swr_cal = IC7200_SWR_CAL,
.alc_cal = IC7200_ALC_CAL,
.rfpower_meter_cal = IC7200_RFPOWER_METER_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& IC7200_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode_with_data,
.get_mode = icom_get_mode_with_data,
.set_vfo = icom_set_vfo,
.set_ant = NULL, /*automatically set by rig depending band */
.get_ant = NULL,
.decode_event = icom_decode_event,
.set_level = ic7200_set_level,
.get_level = ic7200_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_parm = NULL,
.get_parm = NULL,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = NULL,
.set_rptr_shift = NULL,
.get_rptr_shift = NULL,
.set_rptr_offs = NULL,
.get_rptr_offs = NULL,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = NULL,
};
int ic7200_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
unsigned char cmdbuf[MAXFRAMELEN];
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_VOXDELAY:
cmdbuf[0] = 0x55;
return icom_set_level_raw(rig, level, C_CTL_MEM, 0x03, 1, cmdbuf, 1, val);
default:
return icom_set_level(rig, vfo, level, val);
}
}
int ic7200_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
unsigned char cmdbuf[MAXFRAMELEN];
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_VOXDELAY:
cmdbuf[0] = 0x55;
return icom_get_level_raw(rig, level, C_CTL_MEM, 0x03, 1, cmdbuf, val);
default:
return icom_get_level(rig, vfo, level, val);
}
}