mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/kenwood/ts450s.c

251 wiersze
7.8 KiB
C
Czysty Wina Historia

/*
* Hamlib Kenwood backend - TS450S description
* Copyright (c) 2000-2011 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdio.h>
#include <hamlib/rig.h>
#include "kenwood.h"
#include "bandplan.h"
#define TS450S_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define TS450S_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define TS450S_AM_TX_MODES RIG_MODE_AM
#define TS450S_FUNC_ALL (RIG_FUNC_LOCK|RIG_FUNC_AIP|RIG_FUNC_TONE)
#define TS450S_LEVEL_ALL (RIG_LEVEL_STRENGTH|RIG_LEVEL_CWPITCH|RIG_LEVEL_METER|RIG_LEVEL_SWR|RIG_LEVEL_ALC)
#define TS450S_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define TS450S_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define TS450S_SCAN_OPS (RIG_SCAN_VFO)
#define TS450S_CHANNEL_CAPS { \
.freq=1,\
.mode=1,\
.tx_freq=1,\
.tx_mode=1,\
.split=1,\
.funcs=RIG_FUNC_TONE, \
.flags=RIG_CHFLAG_SKIP \
}
static struct kenwood_priv_caps ts450_priv_caps = {
.cmdtrm = EOM_KEN,
};
static const struct confparams ts450_ext_parms[] = {
{ TOK_FINE, "fine", "Fine", "Fine step mode",
NULL, RIG_CONF_CHECKBUTTON, { } },
{ TOK_VOICE, "voice", "Voice", "Voice recall",
NULL, RIG_CONF_BUTTON, { } },
{ TOK_XIT, "xit", "XIT", "XIT",
NULL, RIG_CONF_CHECKBUTTON, { } },
{ TOK_RIT, "rit", "RIT", "RIT",
NULL, RIG_CONF_CHECKBUTTON, { } },
{ RIG_CONF_END, NULL, }
};
static int ts450_open(RIG *rig)
{
int err;
int maxtries;
err = kenwood_open(rig);
if (err != RIG_OK)
return err;
maxtries = rig->state.rigport.retry;
/* no retry for this command that may be missing */
rig->state.rigport.retry = 0;
err = kenwood_simple_transaction(rig, "TO", 3);
if (err != RIG_OK) {
rig_debug(RIG_DEBUG_VERBOSE, "%s: tone unit not detected\n", __func__);
rig->state.has_set_func &= ~RIG_FUNC_TONE;
rig->state.has_get_func &= ~RIG_FUNC_TONE;
}
rig->state.rigport.retry = maxtries;
return RIG_OK;
}
/*
* ts450s rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
* RIT: Variable Range <20>9.99 kHz
*
* TODO: protocol to be checked with manual (identical to TS690)
* - get_channel/set_channel: MR/MW
* - how to set_split in vfo mode?
* - ...
*
* specs: http://www.qsl.net/sm7vhs/radio/kenwood/ts450/specs.htm
* infos comes from http://www.cnham.com/ts450/ts_450_ex_control.pdf
*/
const struct rig_caps ts450s_caps = {
.rig_model = RIG_MODEL_TS450S,
.model_name = "TS-450S",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 10,
.timeout = 1000,
.retry = 3,
.has_get_func = TS450S_FUNC_ALL,
.has_set_func = TS450S_FUNC_ALL,
.has_get_level = TS450S_LEVEL_ALL | RIG_LEVEL_RFPOWER,
.has_set_level = RIG_LEVEL_SET(TS450S_LEVEL_ALL),
.has_get_parm = 0,
.has_set_parm = 0,
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.extparms = ts450_ext_parms,
.ctcss_list = NULL, /* hw dip-switch */
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, }, /* can't be controlled */
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.vfo_ops = TS450S_VFO_OPS,
.scan_ops = TS450S_SCAN_OPS,
.chan_list = {
{ 0, 89, RIG_MTYPE_MEM, TS450S_CHANNEL_CAPS }, /* TBC */
{ 90, 99, RIG_MTYPE_EDGE, TS450S_CHANNEL_CAPS },
RIG_CHAN_END,
},
.rx_range_list1 = {
{ kHz(500), MHz(30), TS450S_ALL_MODES, -1, -1, TS450S_VFO },
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
FRQ_RNG_HF(1,TS450S_OTHER_TX_MODES, W(5),W(100),TS450S_VFO,0),
FRQ_RNG_HF(1,TS450S_AM_TX_MODES, W(2),W(40),TS450S_VFO,0), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(500),MHz(30),TS450S_ALL_MODES,-1,-1,TS450S_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
{kHz(1800),MHz(2)-1,TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO}, /* 100W class */
{kHz(1800),MHz(2)-1,TS450S_AM_TX_MODES,2000,40000,TS450S_VFO}, /* 40W class */
{kHz(3500),MHz(4)-1,TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{kHz(3500),MHz(4)-1,TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
{MHz(7),kHz(7300),TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{MHz(7),kHz(7300),TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
{kHz(10100),kHz(10150),TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{kHz(10100),kHz(10150),TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
{MHz(14),kHz(14350),TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{MHz(14),kHz(14350),TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
{kHz(18068),kHz(18168),TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{kHz(18068),kHz(18168),TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
{MHz(21),kHz(21450),TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{MHz(21),kHz(21450),TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
{kHz(24890),kHz(24990),TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{kHz(24890),kHz(24990),TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
{MHz(28),kHz(29700),TS450S_OTHER_TX_MODES,5000,100000,TS450S_VFO},
{MHz(28),kHz(29700),TS450S_AM_TX_MODES,2000,40000,TS450S_VFO},
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = {
{ TS450S_ALL_MODES, 1 },
{ TS450S_ALL_MODES, 10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_FM, kHz(12) },
{RIG_MODE_FM|RIG_MODE_AM, kHz(6)},
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_AM, Hz(500)},
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_AM, kHz(12)},
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_CWR|RIG_MODE_RTTYR, kHz(6)},
RIG_FLT_END,
},
.priv = (void *)&ts450_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.rig_open = ts450_open,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode_if,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.set_level = kenwood_set_level,
.get_level = kenwood_get_level,
.set_ext_parm = kenwood_set_ext_parm,
.get_ext_parm = kenwood_get_ext_parm,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem_if,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.reset = kenwood_reset,
.scan = kenwood_scan,
.get_channel = kenwood_get_channel,
.set_channel = kenwood_set_channel,
};
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik