mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/kenwood/ts690.c

208 wiersze
6.8 KiB
C
Czysty Wina Historia

/*
* Hamlib Kenwood backend - TS690 description
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
#include <hamlib/rig.h>
#include "bandplan.h"
#include "kenwood.h"
extern int ts450_open(RIG *rig);
#define TS690_ALL_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_CW|RIG_MODE_RTTYR|RIG_MODE_CWR|RIG_MODE_SSB)
#define TS690_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_CWR)
#define TS690_AM_TX_MODES RIG_MODE_AM
/* FIXME: TBC */
#define TS690_FUNC_ALL (RIG_FUNC_LOCK|RIG_FUNC_AIP|RIG_FUNC_TONE)
#define TS690_LEVEL_ALL (RIG_LEVEL_STRENGTH|RIG_LEVEL_METER|RIG_LEVEL_SWR|RIG_LEVEL_ALC)
#define TS690_PARMS (RIG_PARM_ANN) /* optional */
#define TS690_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define TS690_SCAN_OPS (RIG_SCAN_VFO)
#define TS690_VFO (RIG_VFO_A|RIG_VFO_B)
#define TS690_ANTS (0)
#define TS690_CHANNEL_CAPS { \
.freq=1,\
.mode=1,\
.tx_freq=1,\
.tx_mode=1,\
.split=1,\
.funcs=RIG_FUNC_TONE, \
.flags=RIG_CHFLAG_SKIP \
}
static struct kenwood_priv_caps ts690_priv_caps =
{
.cmdtrm = EOM_KEN,
};
/*
* ts690 rig capabilities.
* written from specs:
* http://www.qsl.net/sm7vhs/radio/kenwood/ts690/specs.htm
*
* TODO: protocol to be checked with manual!
* - how to set_split in vfo mode?
* - ...
*/
const struct rig_caps ts690s_caps =
{
RIG_MODEL(RIG_MODEL_TS690S),
.model_name = "TS-690S",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 100,
.timeout = 1000,
.retry = 10,
.has_get_func = TS690_FUNC_ALL,
.has_set_func = TS690_FUNC_ALL,
.has_get_level = TS690_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(TS690_LEVEL_ALL),
.has_get_parm = TS690_PARMS,
.has_set_parm = RIG_LEVEL_SET(TS690_PARMS), /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = kHz(2.2),
.max_xit = kHz(2.2),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.vfo_ops = TS690_VFO_OPS,
.scan_ops = TS690_SCAN_OPS,
.chan_list = {
{ 0, 89, RIG_MTYPE_MEM, TS690_CHANNEL_CAPS }, /* TBC */
{ 90, 99, RIG_MTYPE_EDGE, TS690_CHANNEL_CAPS },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(500), MHz(30), TS690_ALL_MODES, -1, -1, TS690_VFO},
{MHz(50), MHz(54), TS690_ALL_MODES, -1, -1, TS690_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
FRQ_RNG_HF(1, TS690_OTHER_TX_MODES, W(5), W(100), TS690_VFO, TS690_ANTS),
FRQ_RNG_HF(1, TS690_AM_TX_MODES, W(4), W(40), TS690_VFO, TS690_ANTS), /* AM class */
FRQ_RNG_6m(1, TS690_OTHER_TX_MODES, W(2.5), W(50), TS690_VFO, TS690_ANTS),
FRQ_RNG_6m(1, TS690_AM_TX_MODES, W(2), W(20), TS690_VFO, TS690_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(500), MHz(30), TS690_ALL_MODES, -1, -1, TS690_VFO},
{MHz(50), MHz(54), TS690_ALL_MODES, -1, -1, TS690_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
FRQ_RNG_HF(2, TS690_OTHER_TX_MODES, W(5), W(100), TS690_VFO, TS690_ANTS),
FRQ_RNG_HF(2, TS690_AM_TX_MODES, W(4), W(40), TS690_VFO, TS690_ANTS), /* AM class */
FRQ_RNG_6m(2, TS690_OTHER_TX_MODES, W(2.5), W(50), TS690_VFO, TS690_ANTS),
FRQ_RNG_6m(2, TS690_AM_TX_MODES, W(2), W(20), TS690_VFO, TS690_ANTS), /* AM class */
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = { /* FIXME: TBC */
{TS690_ALL_MODES, 1},
{TS690_ALL_MODES, 10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_FM, kHz(12)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(6)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_CWR | RIG_MODE_RTTYR | RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_CWR | RIG_MODE_RTTYR | RIG_MODE_AM, Hz(500)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_CWR | RIG_MODE_RTTYR | RIG_MODE_AM, kHz(12)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_CWR | RIG_MODE_RTTYR, kHz(6)},
RIG_FLT_END,
},
.priv = (void *)& ts690_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.rig_open = ts450_open,
.rig_close = kenwood_close,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode_if,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_split_vfo = kenwood_set_split_vfo,
.get_split_vfo = kenwood_get_split_vfo_if,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.set_level = kenwood_set_level,
.get_level = kenwood_get_level,
.set_ext_parm = kenwood_set_ext_parm,
.get_ext_parm = kenwood_get_ext_parm,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem_if,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.reset = kenwood_reset,
.scan = kenwood_scan,
.get_channel = kenwood_get_channel,
.set_channel = kenwood_set_channel,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* Function definitions below
*/
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik