Hamlib/icom/icom.c

2903 wiersze
67 KiB
C

/*
* Hamlib CI-V backend - main file
* Copyright (c) 2000-2004 by Stephane Fillod
*
* $Id: icom.c,v 1.92 2004-09-26 08:35:03 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <math.h>
#include <hamlib/rig.h>
#include <serial.h>
#include <misc.h>
#include <cal.h>
#include <token.h>
#include <register.h>
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
const struct ts_sc_list r8500_ts_sc_list[] = {
{ 10, 0x00 },
{ 50, 0x01 },
{ 100, 0x02 },
{ kHz(1), 0x03 },
{ 12500, 0x04 },
{ kHz(5), 0x05 },
{ kHz(9), 0x06 },
{ kHz(10), 0x07 },
{ 12500, 0x08 },
{ kHz(20), 0x09 },
{ kHz(25), 0x10 },
{ kHz(100), 0x11 },
{ MHz(1), 0x12 },
{ 0, 0x13 }, /* programmable tuning step not supported */
{ 0, 0 },
};
const struct ts_sc_list ic737_ts_sc_list[] = {
{ 10, 0x00 },
{ kHz(1), 0x01 },
{ kHz(2), 0x02 },
{ kHz(3), 0x03 },
{ kHz(4), 0x04 },
{ kHz(5), 0x05 },
{ kHz(6), 0x06 },
{ kHz(7), 0x07 },
{ kHz(8), 0x08 },
{ kHz(9), 0x09 },
{ kHz(10), 0x10 },
{ 0, 0 },
};
const struct ts_sc_list r75_ts_sc_list[] = {
{ 10, 0x00 },
{ 100, 0x01 },
{ kHz(1), 0x02 },
{ kHz(5), 0x03 },
{ 6250, 0x04 },
{ kHz(9), 0x05 },
{ kHz(10), 0x06 },
{ 12500, 0x07 },
{ kHz(20), 0x08 },
{ kHz(25), 0x09 },
{ kHz(100), 0x10 },
{ MHz(1), 0x11 },
{ 0, 0 },
};
const struct ts_sc_list r7100_ts_sc_list[] = {
{ 100, 0x00 },
{ kHz(1), 0x01 },
{ kHz(5), 0x02 },
{ kHz(10), 0x03 },
{ 12500, 0x04 },
{ kHz(20), 0x05 },
{ kHz(25), 0x06 },
{ kHz(100), 0x07 },
{ 0, 0 },
};
const struct ts_sc_list r9000_ts_sc_list[] = {
{ 10, 0x00 },
{ 100, 0x01 },
{ kHz(1), 0x02 },
{ kHz(5), 0x03 },
{ kHz(9), 0x04 },
{ kHz(10), 0x05 },
{ 12500, 0x06 },
{ kHz(20), 0x07 },
{ kHz(25), 0x08 },
{ kHz(100), 0x09 },
{ 0, 0 },
};
const struct ts_sc_list ic718_ts_sc_list[] = {
{ 10, 0x00 },
{ kHz(1), 0x01 },
{ kHz(5), 0x01 },
{ kHz(9), 0x01 },
{ kHz(10), 0x04 },
{ kHz(100), 0x05 },
{ 0, 0 },
};
const struct ts_sc_list ic756_ts_sc_list[] = {
{ 10, 0x00 },
{ kHz(1), 0x01 },
{ kHz(5), 0x02 },
{ kHz(9), 0x03 },
{ kHz(10), 0x04 },
{ 0, 0 },
};
const struct ts_sc_list ic756pro_ts_sc_list[] = {
{ 10, 0x00 },
{ 100, 0x01 },
{ kHz(1), 0x02 },
{ kHz(5), 0x03 },
{ kHz(9), 0x04 },
{ kHz(10), 0x05 },
{ kHz(12.5), 0x06 },
{ kHz(20), 0x07 },
{ kHz(25), 0x08 },
{ 0, 0 },
};
const struct ts_sc_list ic706_ts_sc_list[] = {
{ 10, 0x00 },
{ 100, 0x01 },
{ kHz(1), 0x02 },
{ kHz(5), 0x03 },
{ kHz(9), 0x04 },
{ kHz(10), 0x05 },
{ 12500, 0x06 },
{ kHz(20), 0x07 },
{ kHz(25), 0x08 },
{ kHz(100), 0x09 },
{ 0, 0 },
};
const struct ts_sc_list ic910_ts_sc_list[] = {
{ Hz(1), 0x00 },
{ Hz(10), 0x01 },
{ Hz(50), 0x02 },
{ Hz(100), 0x03 },
{ kHz(1), 0x04 },
{ kHz(5), 0x05 },
{ kHz(6.25), 0x06 },
{ kHz(10), 0x07 },
{ kHz(12.5), 0x08 },
{ kHz(20), 0x09 },
{ kHz(25), 0x10 },
{ kHz(100), 0x11 },
{ 0, 0 },
};
struct icom_addr {
rig_model_t model;
unsigned char re_civ_addr;
};
#define TOK_CIVADDR TOKEN_BACKEND(1)
#define TOK_MODE731 TOKEN_BACKEND(2)
const struct confparams icom_cfg_params[] = {
{ TOK_CIVADDR, "civaddr", "CI-V address", "Transceiver's CI-V address",
"0", RIG_CONF_NUMERIC, { .n = { 0, 0xff, 1 } }
},
{ TOK_MODE731, "mode731", "CI-V 731 mode", "CI-V operating frequency "
"data length, needed for IC731 and IC735",
"0", RIG_CONF_CHECKBUTTON
},
{ RIG_CONF_END, NULL, }
};
/*
* Please, if the default CI-V address of your rig is listed as UNKNOWN_ADDR,
* send the value to <f4cfe@users.sourceforge.net> for inclusion. Thanks --SF
*
* TODO: sort this list with most frequent rigs first.
*/
static const struct icom_addr icom_addr_list[] = {
{ RIG_MODEL_IC703, 0x68 },
{ RIG_MODEL_IC706, 0x48 },
{ RIG_MODEL_IC706MKII, 0x4e },
{ RIG_MODEL_IC706MKIIG, 0x58 },
{ RIG_MODEL_IC271, 0x20 },
{ RIG_MODEL_IC275, 0x10 },
{ RIG_MODEL_IC375, 0x12 },
{ RIG_MODEL_IC471, 0x22 },
{ RIG_MODEL_IC475, 0x14 },
{ RIG_MODEL_IC575, 0x16 },
{ RIG_MODEL_IC707, 0x3e },
{ RIG_MODEL_IC725, 0x28 },
{ RIG_MODEL_IC726, 0x30 },
{ RIG_MODEL_IC728, 0x38 },
{ RIG_MODEL_IC729, 0x3a },
{ RIG_MODEL_IC731, 0x02 }, /* need confirmation */
{ RIG_MODEL_IC735, 0x04 },
{ RIG_MODEL_IC736, 0x40 },
{ RIG_MODEL_IC746, 0x56 },
{ RIG_MODEL_IC746PRO, 0x66 },
{ RIG_MODEL_IC737, 0x3c },
{ RIG_MODEL_IC738, 0x44 },
{ RIG_MODEL_IC751, 0x1c },
{ RIG_MODEL_IC751A, 0x1c },
{ RIG_MODEL_IC756, 0x50 },
{ RIG_MODEL_IC756PRO, 0x5c },
{ RIG_MODEL_IC756PROII, 0x64 },
{ RIG_MODEL_IC756PROIII, 0x6e },
{ RIG_MODEL_IC761, 0x1e },
{ RIG_MODEL_IC765, 0x2c },
{ RIG_MODEL_IC775, 0x46 },
{ RIG_MODEL_IC7800, 0x6a },
{ RIG_MODEL_IC781, 0x26 },
{ RIG_MODEL_IC820, 0x42 },
{ RIG_MODEL_IC821, 0x4c },
{ RIG_MODEL_IC821H, 0x4c },
{ RIG_MODEL_IC910, 0x60 },
{ RIG_MODEL_IC970, 0x2e },
{ RIG_MODEL_IC1271, 0x24 },
{ RIG_MODEL_IC1275, 0x18 },
{ RIG_MODEL_ICR10, 0x52 },
{ RIG_MODEL_ICR20, 0x6c },
{ RIG_MODEL_ICR71, 0x1a },
{ RIG_MODEL_ICR72, 0x32 },
{ RIG_MODEL_ICR75, 0x5a },
{ RIG_MODEL_IC78, 0x62 },
{ RIG_MODEL_ICR7000, 0x08 },
{ RIG_MODEL_ICR7100, 0x34 },
{ RIG_MODEL_ICR8500, 0x4a },
{ RIG_MODEL_ICR9000, 0x2a },
{ RIG_MODEL_MINISCOUT, 0x94 },
{ RIG_MODEL_IC718, 0x5e },
{ RIG_MODEL_OS535, 0x80 },
{ RIG_MODEL_ICID1, 0x01 },
{ RIG_MODEL_NONE, 0 },
};
/*
* This is a generic icom_init function.
* You might want to define yours, so you can customize it for your rig
*
* Basically, it sets up *priv
* REM: serial port is already open (rig->state.rigport.fd)
*/
int icom_init(RIG *rig)
{
struct icom_priv_data *priv;
const struct icom_priv_caps *priv_caps;
const struct rig_caps *caps;
if (!rig || !rig->caps)
return -RIG_EINVAL;
caps = rig->caps;
if (!caps->priv)
return -RIG_ECONF;
priv_caps = (const struct icom_priv_caps *) caps->priv;
priv = (struct icom_priv_data*)malloc(sizeof(struct icom_priv_data));
if (!priv) {
/* whoops! memory shortage! */
return -RIG_ENOMEM;
}
rig->state.priv = (void*)priv;
/* TODO: CI-V address should be customizable */
/*
* init the priv_data from static struct
* + override with preferences
*/
priv->re_civ_addr = 0x00;
priv->re_civ_addr = priv_caps->re_civ_addr;
priv->civ_731_mode = priv_caps->civ_731_mode;
return RIG_OK;
}
/*
* ICOM Generic icom_cleanup routine
* the serial port is closed by the frontend
*/
int icom_cleanup(RIG *rig)
{
if (!rig)
return -RIG_EINVAL;
if (rig->state.priv)
free(rig->state.priv);
rig->state.priv = NULL;
return RIG_OK;
}
/*
* icom_set_freq
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char freqbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int freq_len, ack_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
freq_len = priv->civ_731_mode ? 4:5;
/*
* to_bcd requires nibble len
*/
to_bcd(freqbuf, freq, freq_len*2);
retval = icom_transaction (rig, C_SET_FREQ, -1, freqbuf, freq_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_freq: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_freq
* Assumes rig!=NULL, rig->state.priv!=NULL, freq!=NULL
* Note: old rig may return less than 4/5 bytes for get_freq
*/
int icom_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char freqbuf[MAXFRAMELEN];
int freq_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
retval = icom_transaction (rig, C_RD_FREQ, -1, NULL, 0,
freqbuf, &freq_len);
if (retval != RIG_OK)
return retval;
/*
* freqbuf should contain Cn,Data area
*/
freq_len--;
/*
* is it a blank mem channel ?
*/
if (freq_len == 1 && freqbuf[1] == 0xff) {
*freq = RIG_FREQ_NONE;
return RIG_OK;
}
if (freq_len != 4 && freq_len != 5) {
rig_debug(RIG_DEBUG_ERR,"icom_get_freq: wrong frame len=%d\n",
freq_len);
return -RIG_ERJCTED;
}
if (freq_len != (priv->civ_731_mode ? 4:5)) {
rig_debug(RIG_DEBUG_WARN,"icom_get_freq: "
"freq len (%d) differs from "
"expected\n", freq_len);
}
/*
* from_bcd requires nibble len
*/
*freq = from_bcd(freqbuf+1, freq_len*2);
return RIG_OK;
}
int icom_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char freqbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int freq_len, ack_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
freq_len = 2;
/*
* to_bcd requires nibble len
*/
to_bcd(freqbuf, rit, freq_len*2);
retval = icom_transaction (rig, C_SET_OFFS, -1, freqbuf, freq_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_rit: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_set_mode
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char ackbuf[MAXFRAMELEN];
unsigned char icmode;
signed char icmode_ext;
int ack_len, retval, err;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
err = rig2icom_mode(rig, mode, width, &icmode, &icmode_ext);
if (err < 0)
return err;
/* IC-731 and IC-735 don't support passband data */
if (priv->civ_731_mode || rig->caps->rig_model == RIG_MODEL_OS456)
icmode_ext = -1;
retval = icom_transaction (rig, C_SET_MODE, icmode, &icmode_ext,
icmode_ext == -1 ? 0 : 1, ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_mode: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_mode
* Assumes rig!=NULL, rig->state.priv!=NULL, mode!=NULL, width!=NULL
*
* TODO: some IC781's, when sending mode info, in wide filter mode, no
* width data is send along, making the frame 1 byte short.
* (Thank to Mel, VE2DC for this info)
*/
int icom_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char modebuf[MAXFRAMELEN];
int mode_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
retval = icom_transaction (rig, C_RD_MODE, -1, NULL, 0,
modebuf, &mode_len);
if (retval != RIG_OK)
return retval;
/*
* modebuf should contain Cn,Data area
*/
mode_len--;
if (mode_len != 2 && mode_len != 1) {
rig_debug(RIG_DEBUG_ERR,"icom_get_mode: wrong frame len=%d\n",
mode_len);
return -RIG_ERJCTED;
}
icom2rig_mode(rig, modebuf[1], mode_len==2 ? modebuf[2] : -1, mode, width);
return RIG_OK;
}
/*
* icom_set_vfo
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_vfo(RIG *rig, vfo_t vfo)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, icvfo, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
if (vfo == RIG_VFO_CURR)
return RIG_OK;
switch(vfo) {
case RIG_VFO_A: icvfo = S_VFOA; break;
case RIG_VFO_B: icvfo = S_VFOB; break;
case RIG_VFO_MAIN: icvfo = S_MAIN; break;
case RIG_VFO_SUB: icvfo = S_SUB; break;
case RIG_VFO_VFO:
retval = icom_transaction (rig, C_SET_VFO, -1, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_vfo: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
case RIG_VFO_MEM:
retval = icom_transaction (rig, C_SET_MEM, -1, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_vfo: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
default:
rig_debug(RIG_DEBUG_ERR,"icom: Unsupported VFO %d\n",
vfo);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, C_SET_VFO, icvfo, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_vfo: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_set_level
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char lvlbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int ack_len, lvl_len;
int lvl_cn, lvl_sc; /* Command Number, Subcommand */
int icom_val;
int i, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
/*
* So far, levels of float type are in [0.0..1.0] range
*/
if (RIG_LEVEL_IS_FLOAT(level))
icom_val = val.f * 255;
else
icom_val = val.i;
/* convert values to 0 .. 255 range */
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
switch (level) {
case RIG_LEVEL_NR:
icom_val = val.f * 240;
break;
case RIG_LEVEL_PBT_IN:
case RIG_LEVEL_PBT_OUT:
icom_val = (val.f / 10.0) + 128;
if (icom_val > 255)
icom_val = 255;
break;
default:
break;
}
}
/*
* Most of the time, the data field is a 3 digit BCD,
* but in *big endian* order: 0000..0255
* (from_bcd is little endian)
*/
lvl_len = 2;
to_bcd_be(lvlbuf, (long long)icom_val, lvl_len*2);
/* Optimize:
* sort the switch cases with the most frequent first
*/
switch (level) {
case RIG_LEVEL_PREAMP:
lvl_cn = C_CTL_FUNC;
lvl_sc = S_FUNC_PAMP;
lvl_len = 1;
if (val.i == 0) {
lvlbuf[0] = 0; /* 0=OFF */
break;
}
for (i=0; i<MAXDBLSTSIZ; i++) {
if (rs->preamp[i] == val.i)
break;
}
if (i==MAXDBLSTSIZ || rs->preamp[i] == 0) {
rig_debug(RIG_DEBUG_ERR,"Unsupported preamp set_level %ddB",
val.i);
return -RIG_EINVAL;
}
lvlbuf[0] = i+1; /* 1=P.AMP1, 2=P.AMP2 */
break;
case RIG_LEVEL_ATT:
lvl_cn = C_CTL_ATT;
/* attenuator level is dB, in BCD mode */
lvl_sc = (val.i/10)<<4 | (val.i%10);
lvl_len = 0;
break;
case RIG_LEVEL_AF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_AF;
break;
case RIG_LEVEL_RF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_RF;
break;
case RIG_LEVEL_SQL:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_SQL;
break;
case RIG_LEVEL_IF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_IF;
break;
case RIG_LEVEL_APF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_APF;
break;
case RIG_LEVEL_NR:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_NR;
break;
case RIG_LEVEL_PBT_IN:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_PBTIN;
break;
case RIG_LEVEL_PBT_OUT:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_PBTOUT;
break;
case RIG_LEVEL_CWPITCH:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_CWPITCH;
/* use 'set mode' call for CWPITCH on IC-R75*/
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_MODE_SLCT;
lvl_len = 3;
lvlbuf[0] = S_PRM_CWPITCH;
to_bcd_be(lvlbuf+1, (long long)icom_val, 4);
}
break;
case RIG_LEVEL_RFPOWER:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_RFPOWER;
break;
case RIG_LEVEL_MICGAIN:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_MICGAIN;
break;
case RIG_LEVEL_KEYSPD:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_KEYSPD;
break;
case RIG_LEVEL_NOTCHF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_NOTCHF;
break;
case RIG_LEVEL_COMP:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_COMP;
break;
case RIG_LEVEL_AGC:
lvl_cn = C_CTL_FUNC;
lvl_sc = S_FUNC_AGC;
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
lvl_len = 1;
lvlbuf[0] = val.i;
}
break;
case RIG_LEVEL_BKINDL:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_BKINDL;
break;
case RIG_LEVEL_BALANCE:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_BALANCE;
break;
case RIG_LEVEL_VOXGAIN: /* IC-910H */
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_VOXGAIN;
break;
case RIG_LEVEL_VOXDELAY: /* IC-910H */
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_VOXDELAY;
break;
case RIG_LEVEL_ANTIVOX: /* IC-910H */
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_ANTIVOX;
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported set_level %d", level);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, lvl_cn, lvl_sc, lvlbuf, lvl_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_level: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_level
* Assumes rig!=NULL, rig->state.priv!=NULL, val!=NULL
*/
int icom_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char lvlbuf[MAXFRAMELEN], lvl2buf[MAXFRAMELEN];
int lvl_len, lvl2_len;
int lvl_cn, lvl_sc; /* Command Number, Subcommand */
int icom_val;
int cmdhead;
int retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
lvl2_len = 0;
/* Optimize:
* sort the switch cases with the most frequent first
*/
switch (level) {
case RIG_LEVEL_STRENGTH:
case RIG_LEVEL_RAWSTR:
lvl_cn = C_RD_SQSM;
lvl_sc = S_SML;
break;
case RIG_LEVEL_PREAMP:
lvl_cn = C_CTL_FUNC;
lvl_sc = S_FUNC_PAMP;
break;
case RIG_LEVEL_ATT:
lvl_cn = C_CTL_ATT;
lvl_sc = -1;
break;
case RIG_LEVEL_AF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_AF;
break;
case RIG_LEVEL_RF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_RF;
break;
case RIG_LEVEL_SQL:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_SQL;
break;
case RIG_LEVEL_IF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_IF;
break;
case RIG_LEVEL_APF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_APF;
break;
case RIG_LEVEL_NR:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_NR;
break;
case RIG_LEVEL_PBT_IN:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_PBTIN;
break;
case RIG_LEVEL_PBT_OUT:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_PBTOUT;
break;
case RIG_LEVEL_CWPITCH:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_CWPITCH;
/* use 'set mode' call for CWPITCH on IC-R75*/
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_MODE_SLCT;
lvl2_len = 1;
lvl2buf[0] = S_PRM_CWPITCH;
}
break;
case RIG_LEVEL_RFPOWER:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_RFPOWER;
break;
case RIG_LEVEL_MICGAIN:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_MICGAIN;
break;
case RIG_LEVEL_KEYSPD:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_KEYSPD;
break;
case RIG_LEVEL_NOTCHF:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_NOTCHF;
break;
case RIG_LEVEL_COMP:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_COMP;
break;
case RIG_LEVEL_AGC:
lvl_cn = C_CTL_FUNC;
lvl_sc = S_FUNC_AGC;
break;
case RIG_LEVEL_BKINDL:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_BKINDL;
break;
case RIG_LEVEL_BALANCE:
lvl_cn = C_CTL_LVL;
lvl_sc = S_LVL_BALANCE;
break;
case RIG_LEVEL_VOXGAIN: /* IC-910H */
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_VOXGAIN;
break;
case RIG_LEVEL_VOXDELAY: /* IC-910H */
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_VOXDELAY;
break;
case RIG_LEVEL_ANTIVOX: /* IC-910H */
lvl_cn = C_CTL_MEM;
lvl_sc = S_MEM_ANTIVOX;
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported get_level %d", level);
return -RIG_EINVAL;
}
/* use lvl2buf and lvl2_len for 'set mode' subcommand */
retval = icom_transaction (rig, lvl_cn, lvl_sc, lvl2buf, lvl2_len,
lvlbuf, &lvl_len);
if (retval != RIG_OK)
return retval;
/*
* strbuf should contain Cn,Sc,Data area
*/
cmdhead = (lvl_sc == -1) ? 1:2;
lvl_len -= cmdhead;
/* back off one char since first char in buffer is now 'set mode' subcommand */
if ((rig->caps->rig_model == RIG_MODEL_ICR75)&&(level==RIG_LEVEL_CWPITCH)){
cmdhead = 3;
lvl_len--;
}
if (lvlbuf[0] != ACK && lvlbuf[0] != lvl_cn) {
rig_debug(RIG_DEBUG_ERR,"icom_get_level: ack NG (%#.2x), "
"len=%d\n", lvlbuf[0],lvl_len);
return -RIG_ERJCTED;
}
/*
* The result is a 3 digit BCD, but in *big endian* order: 0000..0255
* (from_bcd is little endian)
*/
icom_val = from_bcd_be(lvlbuf+cmdhead, lvl_len*2);
switch (level) {
case RIG_LEVEL_RAWSTR:
val->i = icom_val;
break;
case RIG_LEVEL_STRENGTH:
val->i = (int)rig_raw2val(icom_val,&rig->caps->str_cal);
break;
case RIG_LEVEL_PREAMP:
if (icom_val == 0) {
val->i = 0;
break;
}
if (icom_val > MAXDBLSTSIZ || rs->preamp[icom_val-1]==0) {
rig_debug(RIG_DEBUG_ERR,"Unsupported preamp get_level %ddB",
icom_val);
return -RIG_EPROTO;
}
val->i = rs->preamp[icom_val-1];
break;
/* RIG_LEVEL_ATT: returned value is already an integer in dB (coded in BCD) */
default:
if (RIG_LEVEL_IS_FLOAT(level))
val->f = (float)icom_val/255;
else
val->i = icom_val;
}
/* convert values from 0 .. 255 range */
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
switch (level) {
case RIG_LEVEL_NR:
val->f = (float)icom_val / 240;
break;
case RIG_LEVEL_PBT_IN:
case RIG_LEVEL_PBT_OUT:
if (icom_val == 255)
val->f = 1280.0;
else
val->f = (float)(icom_val - 128) * 10.0;
break;
default:
break;
}
}
rig_debug(RIG_DEBUG_TRACE,"icom_get_level: %d %d %d %f\n", lvl_len,
icom_val, val->i, val->f);
return RIG_OK;
}
/*
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_conf(RIG *rig, token_t token, const char *val)
{
struct icom_priv_data *priv;
struct rig_state *rs;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
switch(token) {
case TOK_CIVADDR:
if (val[0] == '0' && val[1] == 'x')
priv->re_civ_addr = strtol(val, (char **)NULL, 16);
else
priv->re_civ_addr = atoi(val);
break;
case TOK_MODE731:
priv->civ_731_mode = atoi(val) ? 1:0;
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* assumes rig!=NULL,
* Assumes rig!=NULL, rig->state.priv!=NULL
* and val points to a buffer big enough to hold the conf value.
*/
int icom_get_conf(RIG *rig, token_t token, char *val)
{
struct icom_priv_data *priv;
struct rig_state *rs;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
switch(token) {
case TOK_CIVADDR:
sprintf(val, "%d", priv->re_civ_addr);
break;
case TOK_MODE731:
sprintf(val, "%d", priv->civ_731_mode);
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* icom_set_ptt
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char ackbuf[MAXFRAMELEN], pttbuf[1];
int ack_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
pttbuf[0] = ptt == RIG_PTT_ON ? 1 : 0;
retval = icom_transaction (rig, C_CTL_PTT, S_PTT, pttbuf, 1,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_ptt: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_ptt
* Assumes rig!=NULL, rig->state.priv!=NULL, ptt!=NULL
*/
int icom_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char pttbuf[MAXFRAMELEN];
int ptt_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
retval = icom_transaction (rig, C_CTL_PTT, S_PTT, NULL, 0,
pttbuf, &ptt_len);
if (retval != RIG_OK)
return retval;
/*
* freqbuf should contain Cn,Data area
*/
ptt_len--;
if (ptt_len != 1) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ptt: wrong frame len=%d\n",
ptt_len);
return -RIG_ERJCTED;
}
*ptt = pttbuf[1] == 1 ? RIG_PTT_ON : RIG_PTT_OFF;
return RIG_OK;
}
/*
* icom_get_dcd
* Assumes rig!=NULL, rig->state.priv!=NULL, ptt!=NULL
*/
int icom_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char dcdbuf[MAXFRAMELEN];
int dcd_len, retval;
int icom_val;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
retval = icom_transaction (rig, C_RD_SQSM, S_SQL, NULL, 0,
dcdbuf, &dcd_len);
if (retval != RIG_OK)
return retval;
/*
* freqbuf should contain Cn,Data area
*/
dcd_len -= 2;
if (dcd_len != 2) {
rig_debug(RIG_DEBUG_ERR,"icom_get_dcd: wrong frame len=%d\n",
dcd_len);
return -RIG_ERJCTED;
}
/*
* The result is a 3 digit BCD, but in *big endian* order: 0000..0255
* (from_bcd is little endian)
*/
icom_val = from_bcd_be(dcdbuf+2, dcd_len*2);
/*
* 0x00=sql closed, 0x01=sql open
*
* TODO: replace icom_val by dcdbuf[2] ?
*/
*dcd = (icom_val==0x01) ? RIG_DCD_ON : RIG_DCD_OFF;
return RIG_OK;
}
/*
* icom_set_rptr_shift
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t rptr_shift)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval;
int rptr_sc;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
switch (rptr_shift) {
case RIG_RPT_SHIFT_NONE:
rptr_sc = S_DUP_OFF; /* Simplex mode */
break;
case RIG_RPT_SHIFT_MINUS:
rptr_sc = S_DUP_M; /* Duplex - mode */
break;
case RIG_RPT_SHIFT_PLUS:
rptr_sc = S_DUP_P; /* Duplex + mode */
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported shift %d", rptr_shift);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, C_CTL_SPLT, rptr_sc, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_rptr_shift: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_rptr_shift
* Assumes rig!=NULL, rig->state.priv!=NULL, rptr_shift!=NULL
* NOTE: seems not to work (tested on IC-706MkIIG), please report --SF
*/
int icom_get_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t *rptr_shift)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char rptrbuf[MAXFRAMELEN];
int rptr_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
retval = icom_transaction (rig, C_CTL_SPLT, -1, NULL, 0,
rptrbuf, &rptr_len);
if (retval != RIG_OK)
return retval;
/*
* rptrbuf should contain Cn,Sc
*/
rptr_len--;
if (rptr_len != 1) {
rig_debug(RIG_DEBUG_ERR,"icom_get_rptr_shift: wrong frame len=%d\n",
rptr_len);
return -RIG_ERJCTED;
}
switch (rptrbuf[1]) {
case S_DUP_OFF:
*rptr_shift = RIG_RPT_SHIFT_NONE; /* Simplex mode */
break;
case S_DUP_M:
*rptr_shift = RIG_RPT_SHIFT_MINUS; /* Duples - mode */
break;
case S_DUP_P:
*rptr_shift = RIG_RPT_SHIFT_PLUS; /* Duplex + mode */
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported shift %d", rptrbuf[1]);
return -RIG_EPROTO;
}
return RIG_OK;
}
/*
* icom_set_rptr_offs
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t rptr_offs)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char offsbuf[MAXFRAMELEN],ackbuf[MAXFRAMELEN];
int ack_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
/*
* Icoms are using a 100Hz unit (at least on 706MKIIg) -- SF
*/
to_bcd(offsbuf, rptr_offs/100, OFFS_LEN*2);
retval = icom_transaction (rig, C_SET_OFFS, -1, offsbuf, OFFS_LEN,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_rptr_offs: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_rptr_offs
* Assumes rig!=NULL, rig->state.priv!=NULL, rptr_offs!=NULL
*/
int icom_get_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t *rptr_offs)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char offsbuf[MAXFRAMELEN];
int offs_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
retval = icom_transaction (rig, C_RD_OFFS, -1, NULL, 0,
offsbuf, &offs_len);
if (retval != RIG_OK)
return retval;
/*
* offsbuf should contain Cn
*/
offs_len--;
if (offs_len != OFFS_LEN) {
rig_debug(RIG_DEBUG_ERR,"icom_get_rptr_offs: "
"wrong frame len=%d\n", offs_len);
return -RIG_ERJCTED;
}
/*
* Icoms are using a 100Hz unit (at least on 706MKIIg) -- SF
*/
*rptr_offs = from_bcd(offsbuf+1, offs_len*2)*100;
return RIG_OK;
}
/*
* icom_set_split_freq
* Assumes rig!=NULL, rig->state.priv!=NULL,
* icom_set_vfo,icom_set_freq works for this rig
* FIXME: status
*
* Assumes also that the current VFO is the rx VFO.
*/
int icom_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq)
{
int status;
/* This method works also in memory mode(RIG_VFO_MEM) */
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
status = icom_set_freq(rig, RIG_VFO_CURR, tx_freq);
if (status != RIG_OK)
return status;
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
return 0;
}
status = icom_set_vfo(rig, RIG_VFO_B);
if (status != RIG_OK)
return status;
status = icom_set_freq(rig, RIG_VFO_CURR, tx_freq);
if (status != RIG_OK)
return status;
status = icom_set_vfo(rig, RIG_VFO_A);
if (status != RIG_OK)
return status;
return status;
}
/*
* icom_get_split_freq
* Assumes rig!=NULL, rig->state.priv!=NULL, rx_freq!=NULL, tx_freq!=NULL
* icom_set_vfo,icom_get_freq works for this rig
* FIXME: status
*/
int icom_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq)
{
int status;
/* This method works also in memory mode(RIG_VFO_MEM) */
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
status = icom_get_freq(rig, RIG_VFO_CURR, tx_freq);
if (status != RIG_OK)
return status;
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
return 0;
}
status = icom_set_vfo(rig, RIG_VFO_B);
if (status != RIG_OK)
return status;
status = icom_get_freq(rig, RIG_VFO_CURR, tx_freq);
if (status != RIG_OK)
return status;
status = icom_set_vfo(rig, RIG_VFO_A);
if (status != RIG_OK)
return status;
return status;
}
/*
* icom_set_split_mode
* Assumes rig!=NULL, rig->state.priv!=NULL,
* icom_set_vfo,icom_set_mode works for this rig
* FIXME: status
*/
int icom_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width)
{
int status;
/* This method works also in memory mode(RIG_VFO_MEM) */
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
status = icom_set_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
if (status != RIG_OK)
return status;
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
return 0;
}
status = icom_set_vfo(rig, RIG_VFO_B);
if (status != RIG_OK)
return status;
status = icom_set_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
if (status != RIG_OK)
return status;
status = icom_set_vfo(rig, RIG_VFO_A);
if (status != RIG_OK)
return status;
return status;
}
/*
* icom_get_split_mode
* Assumes rig!=NULL, rig->state.priv!=NULL,
* rx_mode!=NULL, rx_width!=NULL, tx_mode!=NULL, tx_width!=NULL
* icom_set_vfo,icom_get_mode works for this rig
* FIXME: status
*/
int icom_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode, pbwidth_t *tx_width)
{
int status;
/* This method works also in memory mode(RIG_VFO_MEM) */
if (rig_has_vfo_op(rig, RIG_OP_XCHG)) {
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
status = icom_get_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
if (status != RIG_OK)
return status;
status = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (status != RIG_OK)
return status;
return 0;
}
status = icom_set_vfo(rig, RIG_VFO_B);
if (status != RIG_OK)
return status;
status = icom_get_mode(rig, RIG_VFO_CURR, tx_mode, tx_width);
if (status != RIG_OK)
return status;
status = icom_set_vfo(rig, RIG_VFO_A);
if (status != RIG_OK)
return status;
return status;
}
/*
* icom_set_split
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval;
int split_sc;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
switch (split) {
case RIG_SPLIT_OFF:
split_sc = S_SPLT_OFF;
break;
case RIG_SPLIT_ON:
split_sc = S_SPLT_ON;
break;
default:
rig_debug(RIG_DEBUG_ERR,"%s: Unsupported split %d", __FUNCTION__, split);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, C_CTL_SPLT, split_sc, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_split: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_split_vfo
* Assumes rig!=NULL, rig->state.priv!=NULL, split!=NULL
*/
int icom_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char splitbuf[MAXFRAMELEN];
int split_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
retval = icom_transaction (rig, C_CTL_SPLT, -1, NULL, 0,
splitbuf, &split_len);
if (retval != RIG_OK)
return retval;
/*
* splitbuf should contain Cn,Sc
*/
split_len--;
if (split_len != 1) {
rig_debug(RIG_DEBUG_ERR,"%s: wrong frame len=%d\n",
__FUNCTION__, split_len);
return -RIG_ERJCTED;
}
switch (splitbuf[1]) {
case S_SPLT_OFF:
*split = RIG_SPLIT_OFF;
break;
case S_SPLT_ON:
*split = RIG_SPLIT_ON;
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported split %d", splitbuf[1]);
return -RIG_EPROTO;
}
return RIG_OK;
}
/*
* icom_mem_get_split_vfo
* Assumes rig!=NULL, rig->state.priv!=NULL, split!=NULL
*/
int icom_mem_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
{
int retval;
/* this hacks works only when in memory mode
* I have no clue how to detect split in regular VFO mode
*/
if (rig->state.current_vfo != RIG_VFO_MEM)
return -RIG_ENAVAIL;
retval = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
if (retval == RIG_OK) {
*split = RIG_SPLIT_ON;
/* get it back to normal */
retval = icom_vfo_op(rig, vfo, RIG_OP_XCHG);
} else if (retval == -RIG_ERJCTED) {
*split = RIG_SPLIT_OFF;
} else {
/* this is really an error! */
return retval;
}
return RIG_OK;
}
/*
* icom_set_ts
* Assumes rig!=NULL, rig->caps->priv!=NULL
*/
int icom_set_ts(RIG *rig, vfo_t vfo, shortfreq_t ts)
{
const struct icom_priv_caps *priv_caps;
unsigned char ackbuf[MAXFRAMELEN];
int i, ack_len, retval;
int ts_sc = 0;
priv_caps = (const struct icom_priv_caps*)rig->caps->priv;
for (i=0; i<TSLSTSIZ; i++) {
if (priv_caps->ts_sc_list[i].ts == ts) {
ts_sc = priv_caps->ts_sc_list[i].sc;
break;
}
}
if (i >= TSLSTSIZ) {
return -RIG_EINVAL; /* not found, unsupported */
}
retval = icom_transaction (rig, C_SET_TS, ts_sc, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_ts: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_ts
* Assumes rig!=NULL, rig->caps->priv!=NULL, ts!=NULL
* NOTE: seems not to work (tested on IC-706MkIIG), please report --SF
*/
int icom_get_ts(RIG *rig, vfo_t vfo, shortfreq_t *ts)
{
const struct icom_priv_caps *priv_caps;
unsigned char tsbuf[MAXFRAMELEN];
int ts_len, i, retval;
priv_caps = (const struct icom_priv_caps*)rig->caps->priv;
retval = icom_transaction (rig, C_SET_TS, -1, NULL, 0, tsbuf, &ts_len);
if (retval != RIG_OK)
return retval;
/*
* tsbuf should contain Cn,Sc
*/
ts_len--;
if (ts_len != 1) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ts: wrong frame len=%d\n",
ts_len);
return -RIG_ERJCTED;
}
for (i=0; i<TSLSTSIZ; i++) {
if (priv_caps->ts_sc_list[i].sc == tsbuf[1]) {
*ts = priv_caps->ts_sc_list[i].ts;
break;
}
}
if (i >= TSLSTSIZ) {
return -RIG_EPROTO; /* not found, unsupported */
}
return RIG_OK;
}
/*
* icom_set_func
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
unsigned char fctbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int fct_len, acklen, retval;
int fct_cn, fct_sc; /* Command Number, Subcommand */
/*
* except for IC-R8500
*/
fctbuf[0] = status? 0x01:0x00;
fct_len = rig->caps->rig_model == RIG_MODEL_ICR8500 ? 0 : 1;
/* Optimize:
* sort the switch cases with the most frequent first
*/
switch (func) {
case RIG_FUNC_FAGC:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_AGC;
/* note: should it be a LEVEL only, and no func? --SF */
if (status != 0)
fctbuf[0] = 0x01; /* default to 0x01 super-fast */
else
fctbuf[0] = 0x02;
break;
case RIG_FUNC_NB:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_NB;
break;
case RIG_FUNC_COMP:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_COMP;
break;
case RIG_FUNC_VOX:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_VOX;
break;
case RIG_FUNC_TONE: /* repeater tone */
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_TONE;
break;
case RIG_FUNC_TSQL:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_TSQL;
break;
case RIG_FUNC_SBKIN: /* FIXME ? */
case RIG_FUNC_FBKIN:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_BKIN;
break;
case RIG_FUNC_ANF:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_ANF;
break;
case RIG_FUNC_NR:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_NR;
break;
case RIG_FUNC_APF:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_APF;
break;
case RIG_FUNC_MON:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_MON;
break;
case RIG_FUNC_MN:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_MN;
break;
case RIG_FUNC_RNF:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_RNF;
break;
case RIG_FUNC_AFC: /* IC-910H */
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_AFC;
break;
case RIG_FUNC_SATMODE: /* IC-910H */
fct_cn = C_CTL_MEM;
fct_sc = S_MEM_SATMODE;
break;
case RIG_FUNC_SCOPE: /* IC-910H */
fct_cn = C_CTL_MEM;
fct_sc = S_MEM_BANDSCOPE;
break;
case RIG_FUNC_RESUME: /* IC-910H */
fct_cn = C_CTL_SCAN;
fct_sc = status ? S_SCAN_RSMON : S_SCAN_RSMOFF;
fct_len = 0;
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported set_func %d", func);
return -RIG_EINVAL;
}
retval = icom_transaction(rig, fct_cn, fct_sc, fctbuf, fct_len,
ackbuf, &acklen);
if (retval != RIG_OK)
return retval;
if (acklen != 1) {
rig_debug(RIG_DEBUG_ERR,"icom_set_func: wrong frame len=%d\n",
acklen);
return -RIG_EPROTO;
}
return RIG_OK;
}
/*
* icom_get_func
* Assumes rig!=NULL, rig->state.priv!=NULL
* FIXME: IC8500 and no-sc, any support?
*/
int icom_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
{
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval;
int fct_cn, fct_sc; /* Command Number, Subcommand */
/* Optimize:
* sort the switch cases with the most frequent first
*/
switch (func) {
case RIG_FUNC_FAGC:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_AGC; /* default to 0x01 super-fast */
break;
case RIG_FUNC_NB:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_NB;
break;
case RIG_FUNC_COMP:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_COMP;
break;
case RIG_FUNC_VOX:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_VOX;
break;
case RIG_FUNC_TONE: /* repeater tone */
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_TONE;
break;
case RIG_FUNC_TSQL:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_TSQL;
break;
case RIG_FUNC_SBKIN: /* FIXME ? */
case RIG_FUNC_FBKIN:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_BKIN;
break;
case RIG_FUNC_ANF:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_ANF;
break;
case RIG_FUNC_NR:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_NR;
break;
case RIG_FUNC_APF:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_APF;
break;
case RIG_FUNC_MON:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_MON;
break;
case RIG_FUNC_MN:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_MN;
break;
case RIG_FUNC_RNF:
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_RNF;
break;
case RIG_FUNC_AFC: /* IC-910H */
fct_cn = C_CTL_FUNC;
fct_sc = S_FUNC_AFC;
break;
case RIG_FUNC_SATMODE: /* IC-910H */
fct_cn = C_CTL_MEM;
fct_sc = S_MEM_SATMODE;
break;
case RIG_FUNC_SCOPE: /* IC-910H */
fct_cn = C_CTL_MEM;
fct_sc = S_MEM_BANDSCOPE;
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported get_func %d", func);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, fct_cn, fct_sc, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 3) {
rig_debug(RIG_DEBUG_ERR,"icom_get_func: wrong frame len=%d\n",
ack_len);
return -RIG_EPROTO;
}
*status = ackbuf[2];
return RIG_OK;
}
/*
* icom_set_parm
* Assumes rig!=NULL
*/
int icom_set_parm(RIG *rig, setting_t parm, value_t val)
{
unsigned char prmbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int ack_len, prm_len;
int prm_cn, prm_sc;
int icom_val;
int retval;
int min,hr,sec;
switch (parm) {
case RIG_PARM_ANN:
if ((val.i == RIG_ANN_FREQ) || (val.i == RIG_ANN_RXMODE)) {
prm_cn = C_CTL_ANN;
prm_sc = val.i;
prm_len = 0;
}
else {
if ((val.i == RIG_ANN_ENG)||(val.i == RIG_ANN_JAP)) {
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
prm_len = 2;
prmbuf[0] = S_PRM_LANG;
prmbuf[1] = (val.i == RIG_ANN_ENG ? 0 : 1);
}
else {
rig_debug(RIG_DEBUG_ERR,"Unsupported set_parm_ann %d\n", val.i);
return -RIG_EINVAL;
}
}
break;
case RIG_PARM_APO:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
hr = (float)val.i/60.0;
min = val.i - (hr*60);
prm_len = 3;
prmbuf[0] = S_PRM_SLPTM;
to_bcd_be(prmbuf+1, (long long)hr, 2);
to_bcd_be(prmbuf+2, (long long)min, 2);
break;
case RIG_PARM_BACKLIGHT:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
icom_val = val.f * 255;
prm_len = 3;
prmbuf[0] = S_PRM_BACKLT;
to_bcd_be(prmbuf+1, (long long)icom_val, (prm_len-1)*2);
break;
case RIG_PARM_BEEP:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
prm_len = 2;
prmbuf[0] = S_PRM_BEEP;
prmbuf[1] = val.i;
break;
case RIG_PARM_TIME:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
hr = (float)val.i/3600.0;
min = (float)(val.i - (hr*3600))/60.0;
sec = (val.i - (hr*3600) - (min*60));
prm_len = 4;
prmbuf[0] = S_PRM_TIME;
to_bcd_be(prmbuf+1, (long long)hr, 2);
to_bcd_be(prmbuf+2, (long long)min, 2);
to_bcd_be(prmbuf+3, (long long)sec, 2);
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported set_parm %d\n", parm);
return -RIG_EINVAL;
}
retval = icom_transaction(rig, prm_cn, prm_sc, prmbuf, prm_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1) {
rig_debug(RIG_DEBUG_ERR,"icom_set_parm: wrong frame len=%d\n",
ack_len);
return -RIG_EPROTO;
}
return RIG_OK;
}
/*
* icom_get_parm
* Assumes rig!=NULL
*/
int icom_get_parm(RIG *rig, setting_t parm, value_t *val)
{
unsigned char prmbuf[MAXFRAMELEN], resbuf[MAXFRAMELEN];
int prm_len, res_len;
int prm_cn, prm_sc;
int icom_val;
int cmdhead;
int retval;
int min,hr,sec;
switch (parm) {
case RIG_PARM_APO:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
prm_len = 1;
prmbuf[0] = S_PRM_SLPTM;
break;
case RIG_PARM_BACKLIGHT:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
prm_len = 1;
prmbuf[0] = S_PRM_BACKLT;
break;
case RIG_PARM_BEEP:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
prm_len = 1;
prmbuf[0] = S_PRM_BEEP;
break;
case RIG_PARM_TIME:
prm_cn = C_CTL_MEM;
prm_sc = S_MEM_MODE_SLCT;
prm_len = 1;
prmbuf[0] = S_PRM_TIME;
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported get_parm %d", parm);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, prm_cn, prm_sc, prmbuf, prm_len,
resbuf, &res_len);
if (retval != RIG_OK)
return retval;
/*
* strbuf should contain Cn,Sc,[pn],Data area
*/
cmdhead = (prm_sc == -1) ? 1:3;
res_len -= cmdhead;
if (resbuf[0] != ACK && resbuf[0] != prm_cn) {
rig_debug(RIG_DEBUG_ERR,"%s: ack NG (%#.2x), "
"len=%d\n", __FUNCTION__,resbuf[0],res_len);
return -RIG_ERJCTED;
}
switch (parm) {
case RIG_PARM_APO:
hr = from_bcd_be(resbuf+cmdhead, 2);
min = from_bcd_be(resbuf+cmdhead+1, 2);
icom_val = (hr*60)+min;
val->i = icom_val;
break;
case RIG_PARM_TIME:
hr = from_bcd_be(resbuf+cmdhead, 2);
min = from_bcd_be(resbuf+cmdhead+1, 2);
sec = from_bcd_be(resbuf+cmdhead+2, 2);
icom_val = (hr*3600)+(min*60)+sec;
val->i = icom_val;
break;
default:
icom_val = from_bcd_be(resbuf+cmdhead, res_len*2);
if (RIG_PARM_IS_FLOAT(parm))
val->f = (float)icom_val/255;
else
val->i = icom_val;
}
rig_debug(RIG_DEBUG_TRACE,"%s: %d %d %d %f\n",
__FUNCTION__, res_len, icom_val, val->i, val->f);
return RIG_OK;
}
/*
* icom_set_ctcss_tone
* Assumes rig!=NULL, rig->state.priv!=NULL
*
* Warning! This is untested stuff! May work at least on 756PRO and IC746.
* Please owners report to me <f4cfe@users.sourceforge.net>, thanks. --SF
*/
int icom_set_ctcss_tone(RIG *rig, vfo_t vfo, tone_t tone)
{
const struct rig_caps *caps;
unsigned char tonebuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int tone_len, ack_len, retval;
int i;
caps = rig->caps;
/*
* I don't have documentation for this function,
* and I can't experiment (no hardware), so let's guess.
* Most probably, it might be the index of the CTCSS subaudible
* tone, and not the tone itself, starting from zero.
*
* Something in the range of 00..51, BCD big endian
* Please someone let me know if it works this way. --SF
*/
for (i = 0; caps->ctcss_list[i] != 0 && i<200; i++) {
if (caps->ctcss_list[i] == tone)
break;
}
if (caps->ctcss_list[i] != tone)
return -RIG_EINVAL;
tone_len = 1;
to_bcd_be(tonebuf, (long long)i, tone_len*2);
retval = icom_transaction(rig, C_SET_TONE, S_TONE_RPTR,
tonebuf, tone_len, ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_ctcss_tone: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_ctcss_tone
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_get_ctcss_tone(RIG *rig, vfo_t vfo, tone_t *tone)
{
const struct rig_caps *caps;
unsigned char tonebuf[MAXFRAMELEN];
int tone_len, tone_idx, retval;
int i;
caps = rig->caps;
/*
* see icom_set_ctcss for discussion on the untested status!
*/
retval = icom_transaction(rig, C_SET_TONE, S_TONE_RPTR, NULL, 0,
tonebuf, &tone_len);
if (retval != RIG_OK)
return retval;
if (tone_len != 3) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_tone: ack NG (%#.2x), "
"len=%d\n", tonebuf[0], tone_len);
return -RIG_ERJCTED;
}
tone_len -= 2;
tone_idx = from_bcd_be(tonebuf, tone_len*2);
/* check this tone exists. That's better than nothing. */
for (i = 0; i<=tone_idx; i++) {
if (caps->ctcss_list[i] == 0) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_tone: CTCSS NG "
"(%#.2x)\n", tonebuf[2]);
return -RIG_EPROTO;
}
}
*tone = caps->ctcss_list[tone_idx];
return RIG_OK;
}
/*
* icom_set_ctcss_sql
* Assumes rig!=NULL, rig->state.priv!=NULL
*
* Warning! This is untested stuff! May work at least on 756PRO and IC746.
* Please owners report to me <f4cfe@users.sourceforge.net>, thanks. --SF
*/
int icom_set_ctcss_sql(RIG *rig, vfo_t vfo, unsigned int tone)
{
const struct rig_caps *caps;
unsigned char tonebuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int tone_len, ack_len, retval;
int i;
caps = rig->caps;
/*
* see icom_set_ctcss for discussion on the untested status!
*/
for (i = 0; caps->ctcss_list[i] != 0 && i<200; i++) {
if (caps->ctcss_list[i] == tone)
break;
}
if (caps->ctcss_list[i] != tone)
return -RIG_EINVAL;
tone_len = 1;
to_bcd_be(tonebuf, (long long)i, tone_len*2);
retval = icom_transaction(rig, C_SET_TONE, S_TONE_SQL,
tonebuf, tone_len, ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_ctcss_sql: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_ctcss_sql
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_get_ctcss_sql(RIG *rig, vfo_t vfo, unsigned int *tone)
{
const struct rig_caps *caps;
unsigned char tonebuf[MAXFRAMELEN];
int tone_len, tone_idx, retval;
int i;
caps = rig->caps;
/*
* see icom_set_ctcss for discussion on the untested status!
*/
retval = icom_transaction(rig, C_SET_TONE, S_TONE_SQL, NULL, 0,
tonebuf, &tone_len);
if (retval != RIG_OK)
return retval;
if (tone_len != 3) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_sql: ack NG (%#.2x), "
"len=%d\n", tonebuf[0], tone_len);
return -RIG_ERJCTED;
}
tone_len -= 2;
tone_idx = from_bcd_be(tonebuf, tone_len*2);
/* check this tone exists. That's better than nothing. */
for (i = 0; i<=tone_idx; i++) {
if (caps->ctcss_list[i] == 0) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ctcss_sql: CTCSS NG "
"(%#.2x)\n", tonebuf[2]);
return -RIG_EPROTO;
}
}
*tone = caps->ctcss_list[tone_idx];
return RIG_OK;
}
/*
* icom_set_powerstat
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_powerstat(RIG *rig, powerstat_t status)
{
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval;
int pwr_sc;
pwr_sc = status==RIG_POWER_ON ? S_PWR_ON:S_PWR_OFF;
retval = icom_transaction(rig, C_SET_PWR, pwr_sc, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_powerstat: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_powerstat
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_get_powerstat(RIG *rig, powerstat_t *status)
{
unsigned char cmdbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int cmd_len, ack_len, retval;
/* r75 has no way to get power status, so fake it */
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
/* getting the mode doesn't work if a memory is blank */
/* so use one of the more innculous 'set mode' commands instead */
cmd_len = 1;
cmdbuf[0] = S_PRM_TIME;
retval = icom_transaction(rig, C_CTL_MEM, S_MEM_MODE_SLCT,
cmdbuf, cmd_len, ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
*status = ((ack_len == 6)&&(ackbuf[0] == C_CTL_MEM)) ?
RIG_POWER_ON : RIG_POWER_OFF;
}
else {
retval = icom_transaction(rig, C_SET_PWR, -1, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_get_powerstat: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
*status = ackbuf[1] == S_PWR_ON ? RIG_POWER_ON : RIG_POWER_OFF;
}
return RIG_OK;
}
/*
* icom_set_mem
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_mem(RIG *rig, vfo_t vfo, int ch)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char membuf[2];
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval;
int chan_len;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
chan_len = ch < 100 ? 1 : 2;
to_bcd_be(membuf, ch, chan_len*2);
retval = icom_transaction (rig, C_SET_MEM, -1, membuf, chan_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_mem: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_set_bank
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_bank(RIG *rig, vfo_t vfo, int bank)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char bankbuf[2];
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
to_bcd_be(bankbuf, bank, BANK_NB_LEN*2);
retval = icom_transaction (rig, C_SET_MEM, S_BANK,
bankbuf, CHAN_NB_LEN, ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_bank: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_set_ant
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_set_ant(RIG * rig, vfo_t vfo, ant_t ant)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char antarg;
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval, i_ant;
int ant_len;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
/*
* FIXME: IC-756*, IC-746*
*/
i_ant = ant == RIG_ANT_1 ? 0: 1;
antarg = 0;
ant_len = (rig->caps->rig_model == RIG_MODEL_ICR75) ? 0 : 1;
retval = icom_transaction (rig, C_CTL_ANT, i_ant,
&antarg, ant_len, ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_set_ant: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_get_ant
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_get_ant(RIG *rig, vfo_t vfo, ant_t *ant)
{
unsigned char ackbuf[MAXFRAMELEN];
int ack_len, retval;
retval = icom_transaction(rig, C_CTL_ANT, -1, NULL, 0,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (rig->caps->rig_model == RIG_MODEL_ICR75) {
if (ack_len != 2 || ackbuf[0] != C_CTL_ANT) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ant: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
}
else
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_get_ant: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
/*
* FIXME: IC-756*, IC-746*
*/
*ant = ackbuf[1] == 0 ? RIG_ANT_1 : RIG_ANT_2;
return RIG_OK;
}
/*
* icom_vfo_op, Mem/VFO operation
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char mvbuf[MAXFRAMELEN];
unsigned char ackbuf[MAXFRAMELEN];
int mv_len, ack_len, retval;
int mv_cn, mv_sc;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
mv_len = 0;
switch(op) {
case RIG_OP_CPY:
mv_cn = C_SET_VFO;
mv_sc = S_BTOA;
break;
case RIG_OP_XCHG:
mv_cn = C_SET_VFO;
mv_sc = S_XCHNG;
break;
#if 0
case RIG_OP_DUAL_OFF:
mv_cn = C_SET_VFO;
mv_sc = S_DUAL_OFF;
break;
case RIG_OP_DUAL_ON:
mv_cn = C_SET_VFO;
mv_sc = S_DUAL_ON;
break;
#endif
case RIG_OP_FROM_VFO:
mv_cn = C_WR_MEM;
mv_sc = -1;
break;
case RIG_OP_TO_VFO:
mv_cn = C_MEM2VFO;
mv_sc = -1;
break;
case RIG_OP_MCL:
mv_cn = C_CLR_MEM;
mv_sc = -1;
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported mem/vfo op %#x", op);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, mv_cn, mv_sc, mvbuf, mv_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_vfo_op: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_scan, scan operation
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int icom_scan(RIG *rig, vfo_t vfo, scan_t scan, int ch)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char scanbuf[MAXFRAMELEN];
unsigned char ackbuf[MAXFRAMELEN];
int scan_len, ack_len, retval;
int scan_cn, scan_sc;
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
scan_len = 0;
scan_cn = C_CTL_SCAN;
switch(scan) {
case RIG_SCAN_STOP:
scan_sc = S_SCAN_STOP;
break;
case RIG_SCAN_MEM:
retval = icom_set_vfo(rig, RIG_VFO_MEM);
if (retval != RIG_OK)
return retval;
scan_sc = S_SCAN_START;
break;
case RIG_SCAN_SLCT:
retval = icom_set_vfo(rig, RIG_VFO_MEM);
if (retval != RIG_OK)
return retval;
scan_sc = S_SCAN_START;
break;
case RIG_SCAN_PRIO:
case RIG_SCAN_PROG:
/* TODO: for SCAN_PROG, check this is an edge chan */
/* BTW, I'm wondering if this is possible with CI-V */
retval = icom_set_mem(rig, RIG_VFO_CURR, ch);
if (retval != RIG_OK)
return retval;
retval = icom_set_vfo(rig, RIG_VFO_VFO);
if (retval != RIG_OK)
return retval;
scan_sc = S_SCAN_START;
break;
case RIG_SCAN_DELTA:
scan_sc = S_SCAN_DELTA; /* TODO: delta-f support */
break;
default:
rig_debug(RIG_DEBUG_ERR,"Unsupported scan %#x", scan);
return -RIG_EINVAL;
}
retval = icom_transaction (rig, scan_cn, scan_sc, scanbuf, scan_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"icom_scan: ack NG (%#.2x), "
"len=%d\n", ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* icom_decode is called by sa_sigio, when some asynchronous
* data has been received from the rig
*/
int icom_decode_event(RIG *rig)
{
struct icom_priv_data *priv;
struct rig_state *rs;
unsigned char buf[MAXFRAMELEN];
int frm_len;
freq_t freq;
rmode_t mode;
pbwidth_t width;
rig_debug(RIG_DEBUG_VERBOSE, "icom: icom_decode called\n");
rs = &rig->state;
priv = (struct icom_priv_data*)rs->priv;
frm_len = read_icom_frame(&rs->rigport, buf);
if (frm_len == -RIG_ETIMEOUT)
rig_debug(RIG_DEBUG_VERBOSE, "icom: icom_decode got a timeout before the first character\n");
if (frm_len < 0)
return frm_len;
switch (buf[frm_len-1])
{
case COL:
rig_debug(RIG_DEBUG_VERBOSE, "icom: icom_decode saw a collision\n");
/* Collision */
return -RIG_BUSBUSY;
case FI:
/* Ok, normal frame */
break;
default:
/* Timeout after reading at least one character */
/* Problem on ci-v bus? */
return -RIG_EPROTO;
}
if (buf[3] != BCASTID && buf[3] != priv->re_civ_addr) {
rig_debug(RIG_DEBUG_WARN, "icom_decode: CI-V %#x called for %#x!\n",
priv->re_civ_addr, buf[3]);
}
/*
* the first 2 bytes must be 0xfe
* the 3rd one the emitter
* the 4rd one 0x00 since this is transceive mode
* then the command number
* the rest is data
* and don't forget one byte at the end for the EOM
*/
switch (buf[4]) {
case C_SND_FREQ:
/*
* TODO: the freq length might be less than 4 or 5 bytes
* on older rigs!
*/
if (rig->callbacks.freq_event) {
freq = from_bcd(buf+5, (priv->civ_731_mode ? 4:5)*2);
return rig->callbacks.freq_event(rig, RIG_VFO_CURR, freq,
rig->callbacks.freq_arg);
} else
return -RIG_ENAVAIL;
break;
case C_SND_MODE:
if (rig->callbacks.mode_event) {
icom2rig_mode(rig, buf[5], buf[6], &mode, &width);
return rig->callbacks.mode_event(rig, RIG_VFO_CURR,
mode, width,
rig->callbacks.mode_arg);
} else
return -RIG_ENAVAIL;
break;
default:
rig_debug(RIG_DEBUG_VERBOSE,"icom_decode: tranceive cmd "
"unsupported %#2.2x\n",buf[4]);
return -RIG_ENIMPL;
}
return RIG_OK;
}
/*
* init_icom is called by rig_probe_all (register.c)
*
* probe_icom reports all the devices on the CI-V bus.
*
* rig_model_t probeallrigs_icom(port_t *port, rig_probe_func_t cfunc, rig_ptr_t data)
*/
DECLARE_PROBERIG_BACKEND(icom)
{
unsigned char buf[MAXFRAMELEN], civ_addr, civ_id;
int frm_len, i;
int retval;
rig_model_t model = RIG_MODEL_NONE;
int rates[] = { 19200, 9600, 300, 0 };
int rates_idx;
if (!port)
return RIG_MODEL_NONE;
if (port->type.rig != RIG_PORT_SERIAL)
return RIG_MODEL_NONE;
port->write_delay = port->post_write_delay = 0;
port->retry = 1;
/*
* try for all different baud rates
*/
for (rates_idx = 0; rates[rates_idx]; rates_idx++) {
port->parm.serial.rate = rates[rates_idx];
port->timeout = 2*1000/rates[rates_idx] + 40;
retval = serial_open(port);
if (retval != RIG_OK)
return RIG_MODEL_NONE;
/*
* try all possible addresses on the CI-V bus
* FIXME: actualy, old rigs do not support C_RD_TRXID cmd!
* Try to be smart, and deduce model depending
* on freq range, return address, and
* available commands.
*/
for (civ_addr=0x01; civ_addr<=0x7f; civ_addr++) {
frm_len = make_cmd_frame(buf, civ_addr, C_RD_TRXID, S_RD_TRXID,
NULL, 0);
serial_flush(port);
write_block(port, buf, frm_len);
/* read out the bytes we just sent
* TODO: check this is what we expect
*/
frm_len = read_icom_frame(port, buf);
/* this is the reply */
frm_len = read_icom_frame(port, buf);
/* timeout.. nobody's there */
if (frm_len <= 0)
continue;
if (buf[7] != FI && buf[5] != FI) {
/* protocol error, unexpected reply.
* is this a CI-V device?
*/
close(port->fd);
return RIG_MODEL_NONE;
} else if (buf[4] == NAK) {
/*
* this is an Icom, but it does not support transceiver ID
* try to guess from the return address
*/
civ_id = buf[3];
} else {
civ_id = buf[6];
}
for (i=0; icom_addr_list[i].model != RIG_MODEL_NONE; i++) {
if (icom_addr_list[i].re_civ_addr == civ_id) {
rig_debug(RIG_DEBUG_VERBOSE,"probe_icom: found %#x"
" at %#x\n", civ_id, buf[3]);
model = icom_addr_list[i].model;
if (cfunc)
(*cfunc)(port, model, data);
break;
}
}
/*
* not found in known table....
* update icom_addr_list[]!
*/
if (icom_addr_list[i].model == RIG_MODEL_NONE)
rig_debug(RIG_DEBUG_WARN,"probe_icom: found unknown device "
"with CI-V ID %#x, please report to Hamlib "
"developers.\n", civ_id);
}
/*
* Try to identify OptoScan
*/
for (civ_addr=0x80; civ_addr<=0x8f; civ_addr++) {
frm_len = make_cmd_frame(buf, civ_addr, C_CTL_MISC, S_OPTO_RDID,
NULL, 0);
serial_flush(port);
write_block(port, buf, frm_len);
/* read out the bytes we just sent
* TODO: check this is what we expect
*/
frm_len = read_icom_frame(port, buf);
/* this is the reply */
frm_len = read_icom_frame(port, buf);
/* timeout.. nobody's there */
if (frm_len <= 0)
continue;
/* wrong protocol? */
if (frm_len != 7 || buf[4] != C_CTL_MISC || buf[5] != S_OPTO_RDID) {
continue;
}
rig_debug(RIG_DEBUG_VERBOSE, "%s, found OptoScan%c%c%c, software version %d.%d, "
"interface version %d.%d, at %#x\n",
__FUNCTION__,
buf[2], buf[3], buf[4],
buf[5] >> 4, buf[5] & 0xf,
buf[6] >> 4, buf[6] & 0xf,
civ_addr);
if (buf[6] == '5' && buf[7] == '3' && buf[8] == '5')
model = RIG_MODEL_OS535;
else if (buf[6] == '4' && buf[7] == '5' && buf[8] == '6')
model = RIG_MODEL_OS456;
else
continue;
if (cfunc)
(*cfunc)(port, model, data);
break;
}
close(port->fd);
/*
* Assumes all the rigs on the bus are running at same speed.
* So if one at least has been found, none will be at lower speed.
*/
if (model != RIG_MODEL_NONE)
return model;
}
return model;
}
/*
* initrigs_icom is called by rig_backend_load
*/
DECLARE_INITRIG_BACKEND(icom)
{
rig_debug(RIG_DEBUG_VERBOSE, "icom: _init called\n");
rig_register(&ic703_caps);
rig_register(&ic706_caps);
rig_register(&ic706mkii_caps);
rig_register(&ic706mkiig_caps);
rig_register(&ic718_caps);
rig_register(&ic725_caps);
rig_register(&ic726_caps);
rig_register(&ic735_caps);
rig_register(&ic736_caps);
rig_register(&ic737_caps);
rig_register(&ic746_caps);
rig_register(&ic746pro_caps);
rig_register(&ic751_caps);
rig_register(&ic761_caps);
rig_register(&ic775_caps);
rig_register(&ic756_caps);
rig_register(&ic756pro_caps);
rig_register(&ic756pro2_caps);
rig_register(&ic756pro3_caps);
rig_register(&ic765_caps);
rig_register(&ic78_caps);
rig_register(&ic7800_caps);
rig_register(&ic781_caps);
rig_register(&ic707_caps);
rig_register(&ic728_caps);
rig_register(&ic821h_caps);
rig_register(&ic910_caps);
rig_register(&ic970_caps);
rig_register(&icr10_caps);
rig_register(&icr20_caps);
rig_register(&icr71_caps);
rig_register(&icr72_caps);
rig_register(&icr75_caps);
rig_register(&icr7000_caps);
rig_register(&icr7100_caps);
rig_register(&icr8500_caps);
rig_register(&icr9000_caps);
rig_register(&ic271_caps);
rig_register(&ic275_caps);
rig_register(&ic471_caps);
rig_register(&ic475_caps);
rig_register(&os535_caps);
rig_register(&os456_caps);
rig_register(&omnivip_caps);
rig_register(&id1_caps);
return RIG_OK;
}