Hamlib/rigs/mds/4710.c

94 wiersze
3.0 KiB
C

#include "mds.h"
const struct rig_caps mds_4710_caps =
{
RIG_MODEL(RIG_MODEL_MDS4710),
.model_name = "4710",
.mfg_name = "MDS",
.version = "20221114.0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 110,
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = MDS_LEVELS,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
// .level_gran = { [LVL_CWPITCH] = { .step = { .i = 10 } } },
// .ctcss_list = common_ctcss_list,
// .dcs_list = full_dcs_list,
// 2050 does have channels...not implemented yet as no need yet
// .chan_list = {
// { 0, 18, RIG_MTYPE_MEM, DUMMY_MEM_CAP },
// { 19, 19, RIG_MTYPE_CALL },
// { 20, NB_CHAN-1, RIG_MTYPE_EDGE },
// RIG_CHAN_END,
// },
// .scan_ops = DUMMY_SCAN,
// .vfo_ops = DUMMY_VFO_OP,
.transceive = RIG_TRN_RIG,
.rx_range_list1 = {
{
.startf = MHz(380), .endf = MHz(530), .modes = MDS_ALL_MODES,
.low_power = 0, .high_power = 0, MDS_VFOS, RIG_ANT_1, "USA"
},
RIG_FRNG_END,
},
.rx_range_list2 = {RIG_FRNG_END,},
.tx_range_list1 = {
{MHz(380), MHz(400), MDS_ALL_MODES, W(.1), W(5), RIG_VFO_A, RIG_ANT_NONE, "USA"},
{MHz(400), MHz(450), MDS_ALL_MODES, W(.1), W(5), RIG_VFO_A, RIG_ANT_NONE, "USA"},
{MHz(450), MHz(512), MDS_ALL_MODES, W(.1), W(5), RIG_VFO_A, RIG_ANT_NONE, "USA"},
{MHz(406), MHz(530), MDS_ALL_MODES, W(.1), W(5), RIG_VFO_A, RIG_ANT_NONE, "USA"},
RIG_FRNG_END,
},
// .tx_range_list2 = {RIG_FRNG_END,}
.tuning_steps = {
// Rem: no support for changing tuning step
{MDS_ALL_MODES, 6250},
RIG_TS_END,
},
.filters = {
{MDS_ALL_MODES, RIG_FLT_ANY},
RIG_FLT_END
},
.priv = NULL,
.rig_init = mds_init,
.rig_open = mds_open,
.rig_cleanup = mds_cleanup,
// .set_conf = dummy_set_conf,
// .get_conf = dummy_get_conf,
.set_freq = mds_set_freq,
.get_freq = mds_get_freq,
// .set_mode = mds_set_mode,
// .get_mode = mds_get_mode,
// .set_level = dummy_set_level,
// .get_level = mds_get_level,
.get_info = mds_get_info,
.set_ptt = mds_set_ptt,
.get_ptt = mds_get_ptt,
// .get_dcd = dummy_get_dcd,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};