Hamlib/racal/ra3702.c

163 wiersze
4.1 KiB
C

/*
* Hamlib Racal backend - RA3702 description
* Copyright (c) 2010 by Stephane Fillod
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "ra37xx.h"
/* TODO: ISB */
#define RA3702_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define RA3702_FUNC (RIG_FUNC_MUTE)
#define RA3702_LEVEL_ALL (RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_AGC|\
RIG_LEVEL_CWPITCH|RIG_LEVEL_PREAMP|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR)
#define RA3702_PARM_ALL (RIG_PARM_NONE)
#define RA3702_VFO (RIG_VFO_A)
#define RA3702_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define RA3702_SCAN_OPS (RIG_SCAN_STOP|RIG_SCAN_VFO|RIG_SCAN_MEM)
/*
* ra3702 rig capabilities.
*
* Required A6A1 serial asynchronous interface
*
*/
const struct rig_caps ra3702_caps = {
.rig_model = RIG_MODEL_RA3702,
.model_name = "RA3702",
.mfg_name = "Racal",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 50,
.serial_rate_max = 9600,
.serial_data_bits = 7,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_EVEN,
.serial_handshake = RIG_HANDSHAKE_XONXOFF,
.write_delay = 0,
.post_write_delay = 0,
.timeout = RA37XX_TIMEOUT,
.retry = 2,
.has_get_func = RA3702_FUNC,
.has_set_func = RA3702_FUNC,
.has_get_level = RA3702_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(RA3702_LEVEL_ALL),
.has_get_parm = RA3702_PARM_ALL,
.has_set_parm = RIG_PARM_SET(RA3702_PARM_ALL),
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.vfo_ops = RA3702_VFO_OPS,
.scan_ops = RA3702_SCAN_OPS,
.preamp = { 20, RIG_DBLST_END }, /* FIXME */
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.str_cal = RA37XX_STR_CAL,
.chan_list = {
{ 0, 99, RIG_MTYPE_MEM, RA37XX_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(15),MHz(30)-1,RA3702_MODES,-1,-1,RA3702_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(15),MHz(30)-1,RA3702_MODES,-1,-1,RA3702_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{RA3702_MODES,1},
{RA3702_MODES,10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
/* at -3dB */
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.7)},
{RA3702_MODES, kHz(12)},
{RA3702_MODES, kHz(6)},
{RA3702_MODES, Hz(300)},
{RA3702_MODES, kHz(1)},
{RA3702_MODES, kHz(2.7)},
//{RA3702_MODES, 0}, /* accept any BW */
RIG_FLT_END,
},
.cfgparams = ra37xx_cfg_params,
.rig_init = ra37xx_init,
.rig_cleanup = ra37xx_cleanup,
.rig_open = ra37xx_open,
.rig_close = ra37xx_close,
.set_conf = ra37xx_set_conf,
.get_conf = ra37xx_get_conf,
.set_freq = ra37xx_set_freq,
.get_freq = ra37xx_get_freq,
.set_mode = ra37xx_set_mode,
.get_mode = ra37xx_get_mode,
.set_func = ra37xx_set_func,
.get_func = ra37xx_get_func,
.set_level = ra37xx_set_level,
.get_level = ra37xx_get_level,
.set_ant = ra37xx_set_ant,
.get_ant = ra37xx_get_ant,
.set_mem = ra37xx_set_mem,
.get_mem = ra37xx_get_mem,
.scan = ra37xx_scan,
.vfo_op = ra37xx_vfo_op,
.get_info = ra37xx_get_info,
};
/*
* Function definitions below
*/