Hamlib/yaesu/yaesu.c

/*
 * hamlib - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com)
 *
 * yaesu.c - (C) Stephane Fillod 2001-2010
 *
 * This shared library provides an API for communicating
 * via serial interface to a Yaesu rig
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <string.h>  /* String function definitions */
#include <unistd.h>  /* UNIX standard function definitions */

#include "hamlib/rig.h"
#include "serial.h"
#include "misc.h"
#include "register.h"

#include "yaesu.h"

struct yaesu_id {
	rig_model_t model;
	int id1, id2;
};

#define UNKNOWN_ID -1

/*
 * Identification number as returned by 0xFA opcode.
 * Note: On the FT736R, the 0xFA opcode sets CTCSS tone code
 *
 * Please, if the model number of your rig is listed as UNKNOWN_ID,
 * send the value to <fillods@users.sourceforge.net> for inclusion. Thanks --SF
 */
static const struct yaesu_id yaesu_id_list[] = {
	{ RIG_MODEL_FT1000, 0x10, 0x21 }, /* or 0x10, 0x00 ? */
	{ RIG_MODEL_FT990, 0x09, 0x90 },
	{ RIG_MODEL_FT890, 0x08, 0x41 },
	{ RIG_MODEL_FRG100, 0x03, 0x92 }, /* TBC, inconsistency in manual */
	{ RIG_MODEL_FT1000MP, 0x03, 0x93 },
	{ RIG_MODEL_FT1000MPMKV, 0x03, 0x93 }, /* or 0x10, 0x00 ? */
	{ RIG_MODEL_FT1000MPMKVFLD, 0x03, 0x93 },
	{ RIG_MODEL_VX1700, 0x06, 0x04 },
	{ RIG_MODEL_NONE, UNKNOWN_ID, UNKNOWN_ID },	/* end marker */
};


/*
 * initrigs_yaesu is called by rig_backend_load
 */

DECLARE_INITRIG_BACKEND(yaesu)
{
  rig_debug(RIG_DEBUG_VERBOSE, "yaesu: %s called\n", __func__);

  rig_register(&ft100_caps);
  rig_register(&ft450_caps);
  rig_register(&ft736_caps);
  rig_register(&ft747_caps);
  rig_register(&ft757gx_caps);
  rig_register(&ft757gx2_caps);
  rig_register(&ft767gx_caps);
  rig_register(&ft817_caps);
  rig_register(&ft847_caps);
  rig_register(&ft857_caps);
  rig_register(&ft897_caps);
  rig_register(&ft840_caps);
  rig_register(&ft890_caps);
  rig_register(&ft900_caps);
  rig_register(&ft920_caps);
  rig_register(&ft950_caps);
  rig_register(&ft980_caps);
  rig_register(&ft990_caps);
  rig_register(&ft1000d_caps);
  rig_register(&ft1000mp_caps);
  rig_register(&ft1000mpmkv_caps);
  rig_register(&ft1000mpmkvfld_caps);
  rig_register(&ft2000_caps);
  rig_register(&ftdx5000_caps);
  rig_register(&ft9000_caps);
  rig_register(&frg100_caps);
  rig_register(&frg8800_caps);
  rig_register(&frg9600_caps);
  rig_register(&vr5000_caps);
  rig_register(&vx1700_caps);

  return RIG_OK;
}

/*
 * proberigs_yaesu
 *
 * Notes:
 * There's only one rig possible per port.
 *
 * rig_model_t probeallrigs_yaesu(port_t *port, rig_probe_func_t cfunc, rig_ptr_t data)
 */
DECLARE_PROBERIG_BACKEND(yaesu)
{
	unsigned char idbuf[YAESU_CMD_LENGTH+1];
	static const unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xfa};
	int id_len=-1, i, id1, id2;
	int retval=-1;
	int rates[] = { 4800, 57600, 9600, 38400, 0 };	/* possible baud rates */
	int rates_idx;

	if (!port)
		return RIG_MODEL_NONE;

	if (port->type.rig != RIG_PORT_SERIAL)
		return RIG_MODEL_NONE;

	port->write_delay = port->post_write_delay = 20;
	port->parm.serial.stop_bits = 2;
	port->retry = 1;

	/*
	 * try for all different baud rates
	 */
	for (rates_idx = 0; rates[rates_idx]; rates_idx++) {
		port->parm.serial.rate = rates[rates_idx];
		port->timeout = 2*1000/rates[rates_idx] + 50;

		retval = serial_open(port);
		if (retval != RIG_OK)
			return RIG_MODEL_NONE;

		/* send READ STATUS cmd to rig  */
		retval = write_block(port, (char *) cmd, YAESU_CMD_LENGTH);
		id_len = read_block(port, (char *) idbuf, YAESU_CMD_LENGTH);

		close(port->fd);

		if (retval != RIG_OK || id_len < 0)
			continue;
	}

	if (retval != RIG_OK || id_len < 0)
		return RIG_MODEL_NONE;

	/*
	 * reply should be [Flag1,Flag2,Flag3,ID1,ID2]
	 */
	if (id_len != 5 || id_len != 6) {
		idbuf[YAESU_CMD_LENGTH] = '\0';
		rig_debug(RIG_DEBUG_WARN,"probe_yaesu: protocol error,"
			" expected %d, received %d: %s\n", 6, id_len, idbuf);
		return RIG_MODEL_NONE;
	}
	id1 = idbuf[3];
	id2 = idbuf[4];


	for (i=0; yaesu_id_list[i].model != RIG_MODEL_NONE; i++) {
		if (id1 == yaesu_id_list[i].id1 && id2 == yaesu_id_list[i].id2) {
			rig_debug(RIG_DEBUG_VERBOSE,"probe_yaesu: "
					"found ID %02xH %02xH\n", id1, id2);
			if (cfunc)
				(*cfunc)(port, yaesu_id_list[i].model, data);
			return yaesu_id_list[i].model;
		}
	}

	/*
	 * not found in known table....
	 * update yaesu_id_list[]!
	 */
	rig_debug(RIG_DEBUG_WARN,"probe_yaesu: found unknown device "
				"with ID %02xH %02xH, please report to Hamlib "
				"developers.\n", id1, id2);

	return RIG_MODEL_NONE;
}