Hamlib/kenwood/ts940.c

177 wiersze
4.8 KiB
C

/*
* Hamlib Kenwood backend - TS940 description
* Copyright (c) 2000-2004 by Stephane Fillod
*
* $Id: ts940.c,v 1.5 2005-04-03 20:14:26 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "bandplan.h"
#include "kenwood.h"
#include "ic10.h"
#define TS940_ALL_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_CW|RIG_MODE_SSB)
#define TS940_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS940_AM_TX_MODES RIG_MODE_AM
#define TS940_FUNC_ALL RIG_FUNC_LOCK
#define TS940_LEVEL_ALL RIG_LEVEL_NONE
#define TS940_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define TS940_ANTS (0)
#define TS940_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define TS940_SCAN_OPS (RIG_SCAN_VFO)
static const struct kenwood_priv_caps ts940_priv_caps = {
.cmdtrm = EOM_KEN,
.if_len = 29,
};
/*
* ts940 rig capabilities.
* written from specs:
* http://www.qsl.net/sm7vhs/radio/kenwood/ts940/specs.htm
*
* TODO: protocol to be check with manual!
*/
const struct rig_caps ts940_caps = {
.rig_model = RIG_MODEL_TS940,
.model_name = "TS-940S",
.mfg_name = "Kenwood",
.version = BACKEND_VER IC10_VER,
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 100,
.post_write_delay = 150,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = TS940_FUNC_ALL,
.has_get_level = TS940_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(TS940_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.preamp = { RIG_DBLST_END, }, /* FIXME: preamp list */
.attenuator = { RIG_DBLST_END, }, /* TBC */
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.vfo_ops = TS940_VFO_OPS,
.scan_ops = TS940_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 89, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} }, /* TBC */
{ 90, 99, RIG_MTYPE_EDGE, {IC10_CHANNEL_CAPS} },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(500),MHz(30),TS940_ALL_MODES,-1,-1,TS940_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
FRQ_RNG_HF(1,TS940_OTHER_TX_MODES, W(5),W(250),TS940_VFO,TS940_ANTS),
FRQ_RNG_HF(1,TS940_AM_TX_MODES, W(4),W(140),TS940_VFO,TS940_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(500),MHz(30),TS940_ALL_MODES,-1,-1,TS940_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
FRQ_RNG_HF(2,TS940_OTHER_TX_MODES, W(5),W(250),TS940_VFO,TS940_ANTS),
FRQ_RNG_HF(2,TS940_AM_TX_MODES, W(4),W(140),TS940_VFO,TS940_ANTS), /* AM class */
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = { /* FIXME: TBC */
{TS940_ALL_MODES,10},
{TS940_ALL_MODES,kHz(100)},
{TS940_ALL_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *)&ts940_priv_caps,
.set_freq = kenwood_set_freq,
.get_freq = ic10_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = ic10_get_mode,
.set_vfo = ic10_set_vfo,
.get_vfo = ic10_get_vfo,
.set_split_vfo = ic10_set_split_vfo,
.get_split_vfo = ic10_get_split_vfo,
.set_ptt = kenwood_set_ptt,
.get_ptt = ic10_get_ptt,
.set_func = kenwood_set_func,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = ic10_get_mem,
.set_trn = kenwood_set_trn,
.scan = kenwood_scan,
.set_channel = ic10_set_channel,
.get_channel = ic10_get_channel,
.decode_event = ic10_decode_event,
};
/*
* Function definitions below
*/