mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/icom/ic756.c

1136 wiersze
36 KiB
C
Czysty Wina Historia

/*
* Hamlib CI-V backend - description of IC-756 and variations
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
#include <string.h> /* String function definitions */
#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "misc.h"
#include "bandplan.h"
#define IC756_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC756_1HZ_TS_MODES IC756_ALL_RX_MODES
/*
* 100W in all modes but AM (40W)
*/
#define IC756_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC756_AM_TX_MODES (RIG_MODE_AM)
#define IC756PRO_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_RF|RIG_FUNC_ANF)
#define IC756PRO_FUNC_SET (IC756PRO_FUNC_ALL|RIG_FUNC_DUAL_WATCH)
#define IC756PRO_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|RIG_LEVEL_COMP)
/* Note that RIG_LEVEL_VOXGAIN and RIG_LEVEL_ANTIVOX are incorrectly handled in icom.c for
* this model.
*/
#define IC756_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM)
#define IC756_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC756_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO)
#define IC756_ANTS (RIG_ANT_1|RIG_ANT_2)
struct cmdparams ic756pro_cmdparms[] =
{
{ {.s = RIG_PARM_BEEP}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x00, 0x20}, CMD_DAT_BOL, 1 },
{ {.s = RIG_PARM_BACKLIGHT}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x00, 0x09}, CMD_DAT_LVL, 2 },
{ {.s = RIG_PARM_TIME}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x00, 0x16}, CMD_DAT_TIM, 2 },
{ {.s = RIG_LEVEL_VOXDELAY}, CMD_PARAM_TYPE_LEVEL, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x00, 0x60}, CMD_DAT_INT, 1 },
{ {0} }
};
#define IC756PRO_STR_CAL { 16, \
{ \
{ 0, -60 }, \
{ 14, -52 }, \
{ 29, -44 }, \
{ 44, -36 }, \
{ 60, -28 }, \
{ 75, -20 }, \
{ 91, -12 }, \
{ 107, -4 }, \
{ 124, 4 }, \
{ 141, 12 }, \
{ 158, 20 }, \
{ 175, 28 }, \
{ 192, 36 }, \
{ 210, 44 }, \
{ 228, 52 }, \
{ 247 ,60 } \
} }
/*
* This function deals with the older type radios with only 2 filter widths
* (0 - normal, 1 - narrow)
*/
static int r2i_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width,
unsigned char *md, signed char *pd)
{
int err;
err = rig2icom_mode(rig, vfo, mode, width, md, pd);
if (err != RIG_OK)
{
return err;
}
if (PD_WIDE_3 == *pd)
{
*pd = PD_MEDIUM_2;
}
else if (*pd > PD_WIDE_3)
{
(*pd)--;
}
return RIG_OK;
}
/*
* IC-756 rig capabilities.
*/
static const struct icom_priv_caps ic756_priv_caps =
{
0x50, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic756_ts_sc_list,
.antack_len = 3,
.ant_count = 2,
.r2i_mode = r2i_mode,
.agc_levels_present = 1,
.agc_levels = {
{ .level = RIG_AGC_FAST, .icom_level = 1 },
{ .level = RIG_AGC_MEDIUM, .icom_level = 2 },
{ .level = RIG_AGC_SLOW, .icom_level = 3 },
{ .level = -1, .icom_level = 0 },
},
};
const struct rig_caps ic756_caps =
{
RIG_MODEL(RIG_MODEL_IC756),
.model_name = "IC-756",
.mfg_name = "Icom",
.version = BACKEND_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, }, /* FIXME: TBC */
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.agc_level_count = 3,
.agc_levels = { RIG_AGC_FAST, RIG_AGC_MEDIUM, RIG_AGC_SLOW },
.targetable_vfo = 0,
.vfo_ops = IC756_VFO_OPS,
.scan_ops = IC756_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30), MHz(60), IC756_ALL_RX_MODES, -1, -1, IC756_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(1, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(1, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(1, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = { {kHz(30), MHz(60), IC756_ALL_RX_MODES, -1, -1, IC756_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(2, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(2, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(2, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC756_1HZ_TS_MODES, 1},
{IC756_ALL_RX_MODES, kHz(1)},
{IC756_ALL_RX_MODES, kHz(5)},
{IC756_ALL_RX_MODES, kHz(9)},
{IC756_ALL_RX_MODES, kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_CW, kHz(2.4)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_CWR, kHz(2.4)},
{RIG_MODE_CWR, Hz(500)},
{RIG_MODE_AM, kHz(9)},
{RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(9)},
RIG_FLT_END,
},
.str_cal = IC756PRO_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& ic756_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.get_vfo = icom_get_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_freq_mode = icom_set_split_freq_mode,
.get_split_freq_mode = icom_get_split_freq_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = NULL,
.hamlib_check_rig_caps = "HAMLIB_CHECK_RIG_CAPS"
};
/*
* IC-756pro rig capabilities.
*
* TODO: check every parameter, add antenna capabilities
*/
static const struct icom_priv_caps ic756pro_priv_caps =
{
0x5c, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic756pro_ts_sc_list,
.antack_len = 3,
.ant_count = 2,
.agc_levels_present = 1,
.agc_levels = {
{ .level = RIG_AGC_FAST, .icom_level = 1 },
{ .level = RIG_AGC_MEDIUM, .icom_level = 2 },
{ .level = RIG_AGC_SLOW, .icom_level = 3 },
{ .level = -1, .icom_level = 0 },
},
};
const struct rig_caps ic756pro_caps =
{
RIG_MODEL(RIG_MODEL_IC756PRO),
.model_name = "IC-756PRO",
.mfg_name = "Icom",
.version = BACKEND_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC756PRO_FUNC_ALL,
.has_set_func = IC756PRO_FUNC_SET,
.has_get_level = IC756PRO_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */
.attenuator = { 6, 12, 18, 20, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.agc_level_count = 3,
.agc_levels = { RIG_AGC_FAST, RIG_AGC_MEDIUM, RIG_AGC_SLOW },
.targetable_vfo = 0,
.vfo_ops = IC756_VFO_OPS,
.scan_ops = IC756_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30), MHz(60), IC756_ALL_RX_MODES, -1, -1, IC756_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(1, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(1, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(1, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = { {kHz(30), MHz(60), IC756_ALL_RX_MODES, -1, -1, IC756_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(2, IC756_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(2, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(2, IC756_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC756_1HZ_TS_MODES, 1},
{IC756_ALL_RX_MODES, kHz(1)},
{IC756_ALL_RX_MODES, kHz(5)},
{IC756_ALL_RX_MODES, kHz(9)},
{IC756_ALL_RX_MODES, kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_CWR, Hz(500)},
{RIG_MODE_AM, kHz(8)},
{RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(8)},
RIG_FLT_END,
},
.str_cal = IC756PRO_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& ic756pro_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.get_vfo = icom_get_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_freq_mode = icom_set_split_freq_mode,
.get_split_freq_mode = icom_get_split_freq_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = NULL,
.hamlib_check_rig_caps = "HAMLIB_CHECK_RIG_CAPS"
};
/*
* IC-756proII rig capabilities.
*
* TODO: check every parameter, add antenna capabilities
*/
static const struct icom_priv_caps ic756pro2_priv_caps =
{
0x64, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic756pro_ts_sc_list,
.antack_len = 3,
.ant_count = 2,
.agc_levels_present = 1,
.agc_levels = {
{ .level = RIG_AGC_FAST, .icom_level = 1 },
{ .level = RIG_AGC_MEDIUM, .icom_level = 2 },
{ .level = RIG_AGC_SLOW, .icom_level = 3 },
{ .level = -1, .icom_level = 0 },
},
.extcmds = ic756pro_cmdparms, /* Custom op parameters */
};
/*
* These TOKEN_BACKEND's are on a different name space than conf's
*/
#define TOK_MEMNAME TOKEN_BACKEND(1)
#define TOK_MYCALL TOKEN_BACKEND(2)
static const struct confparams ic756pro2_ext_parms[] =
{
{
TOK_SSBBASS, "ssbbass", "SSB Tx Tone (Bass)", "SSB Tx Tone (Bass)",
NULL, RIG_CONF_NUMERIC, { .n = { 0, 10, 1 } }
},
{
TOK_MEMNAME, "showmem", "Show mem name", "Show memory name",
NULL, RIG_CONF_CHECKBUTTON, { }
},
{
TOK_SQLCTRL, "sqlctrl", "RF/Sql control", "set RF/Squelch control",
NULL, RIG_CONF_COMBO, { .c = {{ "Auto", "Sql", "RF+Sql", NULL }} }
},
{
TOK_MYCALL, "mycall", "Callsign", "My call sign",
NULL, RIG_CONF_STRING, { }
},
{
TOK_RTTY_FLTR, "rttyfltr", "RTTY Fltr Width preset", "Set/Read RTTY preset filter width",
"350", RIG_CONF_COMBO, { .c = {{"250", "300", "350", "500", "1000", NULL }} }
},
{ RIG_CONF_END, NULL, }
};
/*
* NUMERIC: val.f
* COMBO: val.i, starting from 0
* STRING: val.cs for set, val.s for get
* CHECKBUTTON: val.i 0/1
*/
/*IC-756Pro Rig parameters Only available in this namespace*/
#define S_MEM_SC_LEN 2 /* 756PRO S_MEM subcmd length */
#define S_MEM_SBASS 0x501 /* SSB TX tone bass level */
#define S_MEM_NAME 0x514 /* send/read memory name */
#define S_MEM_MYCALL 0x515
#define S_MEM_BEEP 0x520 /* Button confirmation */
#define S_MEM_SQL_CTL 0x522 /* RF/SQL ctl set 0=auto; 1 = sql; 2 = RF+SQL */
#define S_MEM_QSPLT 0x524 /* enable quick split mode */
#define S_MEM_TRCV 0x532 /* CI-V trancieve mode */
#define S_MEM_LANG 0x536 /* 0=English 1=Japanese for voice announcer */
#define S_MEM_SCN_SPD 0x556 /* 0 = low; 1 = high */
#define S_MEM_RTTY_FL_PB 0x561 /* 0=250 Hz, 1=300' 2 = 350, 3 = 500, 4 = 1 KHz */
#define S_MEM_RTTY_TWNPK 0x562 /* rtty twin peak filter off/on */
static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val);
static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val);
#define IC756PROII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC756PROII_1HZ_TS_MODES IC756PROII_ALL_RX_MODES
#define IC756PROII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC756PROII_AM_TX_MODES (RIG_MODE_AM)
#define IC756PROII_LEVEL_ALL (IC756PRO_LEVEL_ALL|RIG_LEVEL_VOXDELAY)
#define IC756PROII_PARMS (RIG_PARM_ANN|RIG_PARM_BEEP|RIG_PARM_BACKLIGHT|RIG_PARM_TIME)
const struct rig_caps ic756pro2_caps =
{
RIG_MODEL(RIG_MODEL_IC756PROII),
.model_name = "IC-756PROII",
.mfg_name = "Icom",
.version = BACKEND_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC756PRO_FUNC_ALL,
.has_set_func = IC756PRO_FUNC_SET,
.has_get_level = IC756PROII_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC756PROII_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } },
[LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } },
},
.parm_gran = {},
.extparms = ic756pro2_ext_parms,
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */
.attenuator = { 6, 12, 18, 20, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(0),
.agc_level_count = 3,
.agc_levels = { RIG_AGC_FAST, RIG_AGC_MEDIUM, RIG_AGC_SLOW },
.targetable_vfo = 0,
.vfo_ops = IC756_VFO_OPS,
.scan_ops = IC756_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30), MHz(60), IC756PROII_ALL_RX_MODES, -1, -1, IC756_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, IC756PROII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(1, IC756PROII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(1, IC756PROII_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(1, IC756PROII_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = { {kHz(30), MHz(60), IC756PROII_ALL_RX_MODES, -1, -1, IC756_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, IC756PROII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(2, IC756PROII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(2, IC756PROII_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(2, IC756PROII_AM_TX_MODES, W(2), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC756PROII_1HZ_TS_MODES, 1},
{IC756PROII_ALL_RX_MODES, kHz(1)},
{IC756PROII_ALL_RX_MODES, kHz(5)},
{IC756PROII_ALL_RX_MODES, kHz(9)},
{IC756PROII_ALL_RX_MODES, kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_RTTY, kHz(2.4)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(8)},
RIG_FLT_END,
},
.str_cal = IC756PRO_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& ic756pro2_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode_with_data,
.get_mode = icom_get_mode_with_data,
.set_vfo = icom_set_vfo,
.get_vfo = icom_get_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.decode_event = icom_decode_event,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_freq_mode = icom_set_split_freq_mode,
.get_split_freq_mode = icom_get_split_freq_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = NULL,
.set_ext_parm = ic756pro2_set_ext_parm,
.get_ext_parm = ic756pro2_get_ext_parm,
.hamlib_check_rig_caps = "HAMLIB_CHECK_RIG_CAPS"
};
/*
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val)
{
unsigned char epbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int ack_len, ep_len, val_len;
int ep_cmd = C_CTL_MEM;
int ep_sc; /* Subcommand in $1A $05xx */
int icom_val = 0;
int retval;
ep_len = 0; /* 0 implies BCD data */
val_len = 1;
switch (token)
{
case TOK_SSBBASS:
ep_sc = S_MEM_SBASS ;
icom_val = val.f;
break;
case TOK_MEMNAME:
ep_sc = S_MEM_NAME;
icom_val = val.i ? 1 : 0;
break;
case TOK_SQLCTRL:
ep_sc = S_MEM_SQL_CTL;
/* TODO: check range this actually doesn't decode the input type 'string' */
icom_val = val.i;
break;
case TOK_MYCALL: /* max 10 ASCII char */
ep_len = strlen(val.cs);
if (ep_len > 10)
{
return -RIG_EINVAL;
}
ep_sc = S_MEM_MYCALL;
memcpy(epbuf, val.cs, ep_len);
break;
case TOK_RTTY_FLTR: /* RTTY filter mode 0 - 4 = 250, 300, 350, 500, 1000 */
if (val.i < 0 || val.i > 4) { return -RIG_EINVAL; }
ep_sc = S_MEM_RTTY_FL_PB;
icom_val = val.i;
break;
default:
return -RIG_EINVAL;
}
if (ep_len == 0)
{
to_bcd_be(epbuf, (long long)icom_val, val_len * 2);
ep_len += val_len;
}
retval = icom_transaction(rig, ep_cmd, ep_sc, epbuf, ep_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
{
return retval;
}
if (ack_len != 1 || ackbuf[0] != ACK)
{
rig_debug(RIG_DEBUG_ERR, "%s: ack NG (%#.2x), "
"len=%d\n", __func__, ackbuf[0], ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* Assumes rig!=NULL, rig->state.priv!=NULL
* and val points to a buffer big enough to hold the conf value.
*/
static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val)
{
const struct confparams *cfp;
unsigned char resbuf[MAXFRAMELEN];
int res_len, icom_val = 0;
int cmdhead;
int retval;
int ep_cmd = C_CTL_MEM;
int ep_sc; /* Subcommand in $1A $05xx */
switch (token)
{
case TOK_SSBBASS:
ep_sc = S_MEM_SBASS ;
break;
case TOK_MEMNAME:
ep_sc = S_MEM_NAME;
break;
case TOK_SQLCTRL:
ep_sc = S_MEM_SQL_CTL;
break;
case TOK_MYCALL: /* max 10 ASCII char */
ep_sc = S_MEM_MYCALL;
break;
case TOK_RTTY_FLTR: /* RTTY filter mode 0 - 4 */
ep_sc = S_MEM_RTTY_FL_PB;
break;
default:
rig_debug(RIG_DEBUG_ERR, "Unsupported get_ext_parm %s", rig_strparm(token));
return -RIG_EINVAL;
}
retval = icom_transaction(rig, ep_cmd, ep_sc, NULL, 0,
resbuf, &res_len);
if (retval != RIG_OK)
{
return retval;
}
/*
* strbuf should contain Cn,Sc,Data area
*/
cmdhead = (ep_sc == -1) ? 1 : S_MEM_SC_LEN + 1;
res_len -= cmdhead;
/* should echo cmd, subcmd and then data, if you get an ack something is wrong */
if (resbuf[0] != ep_cmd)
{
if (resbuf[0] == ACK)
{
rig_debug(RIG_DEBUG_ERR, "%s: protocol error (%#.2x), "
"len=%d\n", __func__, resbuf[0], res_len);
return -RIG_EPROTO;
}
else
{
rig_debug(RIG_DEBUG_ERR, "%s: ack NG (%#.2x), "
"len=%d\n", __func__, resbuf[0], res_len);
return -RIG_ERJCTED;
}
}
cfp = rig_ext_lookup_tok(rig, token);
switch (cfp->type)
{
case RIG_CONF_STRING:
memcpy(val->s, resbuf, res_len);
break;
case RIG_CONF_CHECKBUTTON:
case RIG_CONF_COMBO:
val->i = from_bcd_be(resbuf + cmdhead, res_len * 2);
break;
case RIG_CONF_NUMERIC:
val->f = from_bcd_be(resbuf + cmdhead, res_len * 2);
break;
default:
rig_debug(RIG_DEBUG_ERR, "%s: protocol error (%#.2x), "
"len=%d\n", __func__, resbuf[0], res_len);
return -RIG_EPROTO;
}
rig_debug(RIG_DEBUG_TRACE, "%s: %d %d %d %f\n",
__func__, res_len, icom_val, val->i, val->f);
return RIG_OK;
}
/*
* IC-756proIII rig capabilities.
*
* TODO: check every parameter, add antenna capabilities
*/
static const struct icom_priv_caps ic756pro3_priv_caps =
{
0x6e, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic756pro_ts_sc_list,
.antack_len = 3,
.ant_count = 2,
.agc_levels_present = 1,
.agc_levels = {
{ .level = RIG_AGC_FAST, .icom_level = 1 },
{ .level = RIG_AGC_MEDIUM, .icom_level = 2 },
{ .level = RIG_AGC_SLOW, .icom_level = 3 },
{ .level = -1, .icom_level = 0 },
},
.extcmds = ic756pro_cmdparms, /* Custom op parameters */
};
#define IC756PROIII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC756PROIII_1HZ_TS_MODES IC756PROIII_ALL_RX_MODES
#define IC756PROIII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC756PROIII_AM_TX_MODES (RIG_MODE_AM)
#define IC756PROIII_LEVEL_ALL (IC756PROII_LEVEL_ALL|RIG_LEVEL_SWR|RIG_LEVEL_ALC|RIG_LEVEL_RFPOWER_METER|RIG_LEVEL_RFPOWER_METER_WATTS|RIG_LEVEL_COMP_METER|RIG_LEVEL_MONITOR_GAIN|RIG_LEVEL_ANTIVOX|RIG_LEVEL_NB)
/*
* TODO: check whether all func and levels are stored in memory
*
* No memory split support.
* .rptr_offs = 1, to be done for FM special mode
*
* Channel description should be possible through: 0x1a 0x00
* c.f. http://www.plicht.de/ekki/civ/civ-p4305-756pro.html
*/
#define IC756PROIII_MEM_CAP { \
.ant = 1, \
.tuning_step = 1, \
.freq = 1, \
.mode = 1, \
.width = 1, \
.ctcss_tone = 1, \
.ctcss_sql = 1, \
.funcs = IC756PRO_FUNC_ALL, \
.levels = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL), \
}
#define IC756PROIII_SWR_CAL { 5, \
{ \
{ 0, 1.0f }, \
{ 48, 1.5f }, \
{ 80, 2.0f }, \
{ 120, 3.0f }, \
{ 240, 6.0f } \
} }
#define IC756PROIII_ALC_CAL { 2, \
{ \
{ 0, 0.0f }, \
{ 120, 1.0f } \
} }
#define IC756PROIII_RFPOWER_METER_CAL { 13, \
{ \
{ 0, 0.0f }, \
{ 21, 5.0f }, \
{ 43, 10.0f }, \
{ 65, 15.0f }, \
{ 83, 20.0f }, \
{ 95, 25.0f }, \
{ 105, 30.0f }, \
{ 114, 35.0f }, \
{ 124, 40.0f }, \
{ 143, 50.0f }, \
{ 183, 75.0f }, \
{ 213, 100.0f }, \
{ 255, 120.0f } \
} }
#define IC756PROIII_COMP_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 130, 15.0f }, \
{ 241, 30.0f } \
} }
const struct rig_caps ic756pro3_caps =
{
RIG_MODEL(RIG_MODEL_IC756PROIII),
.model_name = "IC-756PROIII",
.mfg_name = "Icom",
.version = BACKEND_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC756PRO_FUNC_ALL | RIG_FUNC_TUNER,
.has_set_func = IC756PRO_FUNC_SET | RIG_FUNC_TUNER,
.has_get_level = IC756PROIII_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC756PROIII_LEVEL_ALL),
.has_get_parm = IC756PROII_PARMS,
.has_set_parm = RIG_PARM_SET(IC756PROII_PARMS),
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } },
[LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } },
},
.parm_gran = {},
.extparms = ic756pro2_ext_parms,
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC values */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(0),
.agc_level_count = 3,
.agc_levels = { RIG_AGC_FAST, RIG_AGC_MEDIUM, RIG_AGC_SLOW },
.targetable_vfo = 0,
.vfo_ops = IC756_VFO_OPS | RIG_OP_TUNE,
.scan_ops = IC756_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 10, /* TODO */
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, IC756PROIII_MEM_CAP },
{ 100, 101, RIG_MTYPE_EDGE, IC756PROIII_MEM_CAP }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30), MHz(60), IC756PROIII_ALL_RX_MODES, -1, -1, IC756_VFO_ALL, IC756_ANTS},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, IC756PROIII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(1, IC756PROIII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(1, IC756PROIII_AM_TX_MODES, W(5), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(1, IC756PROIII_AM_TX_MODES, W(5), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = { {kHz(30), MHz(60), IC756PROIII_ALL_RX_MODES, -1, -1, IC756_VFO_ALL, IC756_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, IC756PROIII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_6m(2, IC756PROIII_OTHER_TX_MODES, W(5), W(100), IC756_VFO_ALL, IC756_ANTS),
FRQ_RNG_HF(2, IC756PROIII_AM_TX_MODES, W(5), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
FRQ_RNG_6m(2, IC756PROIII_AM_TX_MODES, W(5), W(40), IC756_VFO_ALL, IC756_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC756PROIII_1HZ_TS_MODES, 1},
{IC756PROIII_1HZ_TS_MODES, 100},
{IC756PROIII_ALL_RX_MODES, kHz(1)},
{IC756PROIII_ALL_RX_MODES, kHz(5)},
{IC756PROIII_ALL_RX_MODES, kHz(9)},
{IC756PROIII_ALL_RX_MODES, kHz(10)},
{IC756PROIII_ALL_RX_MODES, kHz(12.5)},
{IC756PROIII_ALL_RX_MODES, kHz(20)},
{IC756PROIII_ALL_RX_MODES, kHz(25)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_CW | RIG_MODE_CWR, Hz(500)},
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(3.6)}, /* wide */
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(50)}, /* narrow */
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(8)},
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_SSB | RIG_MODE_RTTY | RIG_MODE_RTTYR, RIG_FLT_ANY}, /* almost any filter */
RIG_FLT_END,
},
.str_cal = IC756PRO_STR_CAL,
.swr_cal = IC756PROIII_SWR_CAL,
.alc_cal = IC756PROIII_ALC_CAL,
.rfpower_meter_cal = IC756PROIII_RFPOWER_METER_CAL,
.comp_meter_cal = IC756PROIII_COMP_METER_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& ic756pro3_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode_with_data,
.get_mode = icom_get_mode_with_data,
.set_vfo = icom_set_vfo,
.get_vfo = icom_get_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.decode_event = icom_decode_event,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_freq_mode = icom_set_split_freq_mode,
.get_split_freq_mode = icom_get_split_freq_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = NULL,
.set_ext_parm = ic756pro2_set_ext_parm,
.get_ext_parm = ic756pro2_get_ext_parm,
.hamlib_check_rig_caps = "HAMLIB_CHECK_RIG_CAPS"
};
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik