Hamlib/uniden/bc898.c

167 wiersze
4.3 KiB
C

/*
* Hamlib Uniden backend - BC898 description
* Copyright (c) 2001-2009 by Stephane Fillod
*
* $Id: bc898.c,v 1.6 2008-05-04 14:23:54 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "uniden.h"
#define BC898_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define BC898_FUNC (RIG_FUNC_MUTE)
#define BC898_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_RAWSTR)
#define BC898_PARM_ALL (RIG_PARM_NONE)
#define BC898_VFO RIG_VFO_A
#define BC898_CHANNEL_CAPS \
UNIDEN_CHANNEL_CAPS \
.ctcss_sql=1, \
.dcs_sql=1
/* The BC898 seems to max out at 32 while 12 seems to be about minimum. */
#define BC898_STR_CAL { 4, \
{ \
{ 0, -54 }, \
{ 12, -20 }, /* TBC */ \
{ 32, 4 }, /* TBC */ \
{ 255, 60 }, \
} }
static const tone_t bc898_ctcss_list[] = {
670, 693, 719, 744, 770, 797, 825, 854, 885, 915,
948, 974, 1000, 1035, 1072, 1109, 1148, 1188, 1230, 1273,
1318, 1365, 1413, 1462, 1514, 1567, 1598, 1622, 1655, 1679,
1713, 1738, 1773, 1799, 1835, 1862, 1899, 1928, 1966, 1995,
2035, 2065, 2107, 2181, 2257, 2291, 2336, 2418, 2503, 2541,
0
};
/*
* bc898 rig capabilities.
*
* TODO: check this with manual or web site.
* http://www.uniden.com/products/productdetail.cfm?product=BC898T&filter=Mobile
*/
const struct rig_caps bc898_caps = {
.rig_model = RIG_MODEL_BC898,
.model_name = "BC898T",
.mfg_name = "Uniden",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRUNKSCANNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 2400,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 1,
.timeout = 200,
.retry = 3,
.has_get_func = BC898_FUNC,
.has_set_func = BC898_FUNC,
.has_get_level = BC898_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(BC898_LEVEL_ALL),
.has_get_parm = BC898_PARM_ALL,
.has_set_parm = RIG_PARM_SET(BC898_PARM_ALL),
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = bc898_ctcss_list,
.dcs_list = uniden_dcs_list,
.preamp = { RIG_DBLST_END },
.attenuator = { 20, RIG_DBLST_END }, /* TBC */
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 10, /* A..J */
.chan_desc_sz = 0,
.str_cal = BC898_STR_CAL,
.chan_list = {
{ 1, 500, RIG_MTYPE_MEM, {BC898_CHANNEL_CAPS} },
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(25),MHz(956),BC898_MODES,-1,-1,BC898_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
/* TODO: is it really continuous coverage ? what about cellular? */
{MHz(25),MHz(956),BC898_MODES,-1,-1,BC898_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{BC898_MODES,kHz(5)},
{BC898_MODES,kHz(6.25)},
{BC898_MODES,kHz(12.5)},
{BC898_MODES,kHz(25)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
{RIG_MODE_WFM, kHz(230)},
RIG_FLT_END,
},
.priv = NULL,
.set_freq = uniden_set_freq,
.get_freq = uniden_get_freq,
.set_mode = uniden_set_mode,
.get_mode = uniden_get_mode,
.set_mem = uniden_set_mem,
.get_mem = uniden_get_mem,
.get_dcd = uniden_get_dcd,
.get_info = uniden_get_info,
.get_level = uniden_get_level,
.set_level = uniden_set_level,
.get_channel = uniden_get_channel,
.set_channel = uniden_set_channel,
};
/*
* Function definitions below
*/