Hamlib/aor/ar8200.c

158 wiersze
4.3 KiB
C

/*
* Hamlib AOR backend - AR8200 description
* Copyright (c) 2000-2003 by Stephane Fillod
*
* $Id: ar8200.c,v 1.16 2003-10-01 19:31:54 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "aor.h"
#define AR8200_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)
#define AR8200_FUNC (RIG_FUNC_TSQL|RIG_FUNC_ABM)
#define AR8200_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH)
#define AR8200_PARM (RIG_PARM_APO|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP)
#define AR8200_VFO_OPS (RIG_OP_MCL|RIG_OP_UP|RIG_OP_DOWN|RIG_OP_LEFT|RIG_OP_RIGHT)
#define AR8200_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
/*
* ar8200 rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*
* part of info from http://www.aoruk.com/8200.htm
*/
const struct rig_caps ar8200_caps = {
.rig_model = RIG_MODEL_AR8200,
.model_name = "AR8200",
.mfg_name = "AOR",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_SCANNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_XONXOFF,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = AR8200_FUNC,
.has_get_level = AR8200_LEVEL,
.has_set_level = RIG_LEVEL_SET(AR8200_LEVEL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL, /* FIXME: CTCSS list */
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, }, /* TBC */
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 20,
.chan_desc_sz = 12,
.vfo_ops = AR8200_VFO_OPS,
.chan_list = { RIG_CHAN_END, }, /* FIXME: memory channel list: 1000 memories */
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100),MHz(2040),AR8200_MODES,-1,-1,AR8200_VFO_ALL},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = { RIG_FRNG_END, }, /* no tx range, this is a scanner! */
.tuning_steps = {
{AR8200_MODES,50},
{AR8200_MODES,100},
{AR8200_MODES,kHz(1)},
{AR8200_MODES,kHz(5)},
{AR8200_MODES,kHz(9)},
{AR8200_MODES,kHz(10)},
{AR8200_MODES,12500},
{AR8200_MODES,kHz(20)},
{AR8200_MODES,kHz(25)},
{AR8200_MODES,kHz(100)},
{AR8200_MODES,MHz(1)},
#if 0
{AR8200_MODES,0}, /* any tuning step */
#endif
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
/* mode/filter list, .remember = order matters! */
{RIG_MODE_SSB|RIG_MODE_CW, kHz(3)},
{RIG_MODE_AM, kHz(9)},
{RIG_MODE_AM, kHz(3)},
{RIG_MODE_FM|RIG_MODE_AM, kHz(12)},
{RIG_MODE_FM, kHz(9)},
{RIG_MODE_WFM, kHz(230)}, /* 50kHz at -3dB, 380kHz at -20dB */
RIG_FLT_END,
},
.priv = NULL,
.rig_init = NULL,
.rig_cleanup = NULL,
.rig_open = NULL,
.rig_close = aor_close,
.set_freq = aor_set_freq,
.get_freq = aor_get_freq,
.set_vfo = aor_set_vfo,
.get_vfo = aor_get_vfo,
.set_mode = aor_set_mode,
.get_mode = aor_get_mode,
.set_ts = aor_set_ts,
.set_powerstat = aor_set_powerstat,
.vfo_op = aor_vfo_op,
.get_info = aor_get_info,
};
/*
* Function definitions below
*/