kopia lustrzana https://github.com/Hamlib/Hamlib
178 wiersze
7.2 KiB
C
178 wiersze
7.2 KiB
C
/*
|
|
* Copyright (c) 2010-2011 by Mikhail Kshevetskiy (mikhail.kshevetskiy@gmail.com)
|
|
*
|
|
* Code based on VX-1700 CAT manual:
|
|
* http://www.vertexstandard.com/downloadFile.cfm?FileID=3397&FileCatID=135&FileName=VX-1700_CAT_MANUAL_10_14_2008.pdf&FileContentType=application%2Fpdf
|
|
*
|
|
* WARNING: this manual have two errors
|
|
* 1) Status Update Command (10h), U=01 returns 0..199 for channels 1..200
|
|
* 2) Frequency Data (bytes 1--4 of 9-Byte VFO Data Assignment, Status Update
|
|
* Command (10h), U=02 and U=03) uses bytes 1--3 for frequency, byte 4 is
|
|
* not used and always zero. Thus bytes 0x15,0xBE,0x68,0x00 means
|
|
* frequency = 10 * 0x15BE68 = 10 * 1425000 = 14.25 MHz
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef _VX1700_H
|
|
#define _VX1700_H 1
|
|
|
|
#include <hamlib/rig.h>
|
|
#include <tones.h>
|
|
|
|
|
|
#define VX1700_MIN_CHANNEL 1
|
|
#define VX1700_MAX_CHANNEL 200
|
|
|
|
#define VX1700_MODES (RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_AM | RIG_MODE_SAL | RIG_MODE_SAH)
|
|
|
|
#define VX1700_VFO_ALL (RIG_VFO_A|RIG_VFO_MEM)
|
|
#define VX1700_ANTS RIG_ANT_1
|
|
#define VX1700_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN|RIG_OP_TO_VFO|RIG_OP_FROM_VFO)
|
|
|
|
#define VX1700_FILTER_WIDTH_NARROW kHz(0.5)
|
|
#define VX1700_FILTER_WIDTH_WIDE kHz(2.2)
|
|
#define VX1700_FILTER_WIDTH_SSB kHz(2.2)
|
|
#define VX1700_FILTER_WIDTH_AM kHz(6.0)
|
|
|
|
/* Returned data length in bytes */
|
|
#define VX1700_MEM_CHNL_LENGTH 1 /* 0x10 p1=01 return size */
|
|
#define VX1700_OP_DATA_LENGTH 19 /* 0x10 p1=02 return size */
|
|
#define VX1700_VFO_DATA_LENGTH 18 /* 0x10 p1=03 return size */
|
|
#define VX1700_READ_METER_LENGTH 5 /* 0xf7 return size */
|
|
#define VX1700_STATUS_FLAGS_LENGTH 5 /* 0xfa return size */
|
|
|
|
/* BCD coded frequency length */
|
|
#define VX1700_BCD_DIAL 8
|
|
|
|
|
|
// VX-1700 native commands
|
|
typedef enum vx1700_native_cmd_e {
|
|
VX1700_NATIVE_RECALL_MEM = 0, /* 0x02, p1=ch */
|
|
VX1700_NATIVE_VFO_TO_MEM, /* 0x03, p1=ch, p2=0 */
|
|
VX1700_NATIVE_MEM_HIDE, /* 0x03, p1=ch, p2=1 */
|
|
VX1700_NATIVE_VFO_A, /* 0x05 */
|
|
VX1700_NATIVE_FREQ_SET, /* 0x0a, p1:4=freq */
|
|
VX1700_NATIVE_MODE_SET_LSB, /* 0x0c, p1=0x00 */
|
|
VX1700_NATIVE_MODE_SET_USB, /* 0x0c, p1=0x01 */
|
|
VX1700_NATIVE_MODE_SET_CW_W, /* 0x0c, p1=0x02 */
|
|
VX1700_NATIVE_MODE_SET_CW_N, /* 0x0c, p1=0x03 */
|
|
VX1700_NATIVE_MODE_SET_AM, /* 0x0c, p1=0x04 */
|
|
VX1700_NATIVE_MODE_SET_RTTY_LSB_W, /* 0x0c, p1=0x08 */
|
|
VX1700_NATIVE_MODE_SET_RTTY_USB_W, /* 0x0c, p1=0x09 */
|
|
VX1700_NATIVE_MODE_SET_H3E, /* 0x0c, p1=0x0d */
|
|
VX1700_NATIVE_MODE_SET_RTTY_LSB_N, /* 0x0c, p1=0x0e */
|
|
VX1700_NATIVE_MODE_SET_RTTY_USB_N, /* 0x0c, p1=0x0f */
|
|
VX1700_NATIVE_PTT_OFF, /* 0x0f, p1=0 */
|
|
VX1700_NATIVE_PTT_ON, /* 0x0f, p1=1 */
|
|
VX1700_NATIVE_UPDATE_MEM_CHNL, /* 0x10, p1=1 */
|
|
VX1700_NATIVE_UPDATE_OP_DATA, /* 0x10, p1=2 */
|
|
VX1700_NATIVE_UPDATE_VFO_DATA, /* 0x10, p1=3 */
|
|
VX1700_NATIVE_TX_POWER_LOW, /* 0x18 */
|
|
VX1700_NATIVE_TX_POWER_MID, /* 0x28 */
|
|
VX1700_NATIVE_TX_POWER_HI, /* 0x48 */
|
|
VX1700_NATIVE_CPY_RX_TO_TX, /* 0x85 */
|
|
VX1700_NATIVE_TX_FREQ_SET, /* 0x8a, p1:4=freq */
|
|
VX1700_NATIVE_OP_FREQ_STEP_UP, /* 0x8e, p1=0 */
|
|
VX1700_NATIVE_OP_FREQ_STEP_DOWN, /* 0x8e, p1=1 */
|
|
VX1700_NATIVE_READ_METER, /* 0xf7 */
|
|
VX1700_NATIVE_READ_FLAGS, /* 0xfa */
|
|
VX1700_NATIVE_SIZE
|
|
} vx1700_native_cmd_t;
|
|
|
|
// OpCode Declarations
|
|
#define VX1700_CMD_RECALLMEM 0x02
|
|
#define VX1700_CMD_VFO2MEM 0x03
|
|
#define VX1700_CMD_SEL_VFOA 0x05
|
|
#define VX1700_CMD_SET_VFOA 0x0a
|
|
#define VX1700_CMD_SEL_OP_MODE 0x0c
|
|
#define VX1700_CMD_PTT 0x0f
|
|
#define VX1700_CMD_UPDATE 0x10
|
|
#define VX1700_CMD_RX2TX 0x85
|
|
#define VX1700_CMD_STEP_VFO 0x8e
|
|
#define VX1700_CMD_RD_METER 0xf7
|
|
#define VX1700_CMD_RD_FLAGS 0xfa
|
|
|
|
// Return codes
|
|
#define VX1700_CMD_RETCODE_OK 0x00
|
|
#define VX1700_CMD_RETCODE_ERROR 0xF0
|
|
|
|
// Operating Mode Status
|
|
#define VX1700_MODE_LSB 0x00
|
|
#define VX1700_MODE_USB 0x01
|
|
#define VX1700_MODE_CW_W 0x02
|
|
#define VX1700_MODE_CW_N 0x03
|
|
#define VX1700_MODE_AM 0x04
|
|
#define VX1700_MODE_RTTY 0x05
|
|
|
|
// Operation Mode Selection
|
|
#define VX1700_OP_MODE_LSB 0x00
|
|
#define VX1700_OP_MODE_USB 0x01
|
|
#define VX1700_OP_MODE_CW_W 0x02
|
|
#define VX1700_OP_MODE_CW_N 0x03
|
|
#define VX1700_OP_MODE_AM 0x04
|
|
#define VX1700_OP_MODE_RTTY_LSB_W 0x08
|
|
#define VX1700_OP_MODE_RTTY_USB_W 0x09
|
|
#define VX1700_OP_MODE_H3E 0x0d
|
|
#define VX1700_OP_MODE_RTTY_LSB_N 0x0e
|
|
#define VX1700_OP_MODE_RTTY_USB_N 0x0f
|
|
|
|
// Status Flag 1 Masks
|
|
#define VX1700_SF_LOCKED 0x01 /* LOCK is activated */
|
|
#define VX1700_SF_MEM 0x20 /* Memory Mode */
|
|
#define VX1700_SF_VFO 0x80 /* VFO Mode */
|
|
|
|
// Status Flag 2 Masks
|
|
#define VX1700_SF_PTT_BY_CAT 0x01 /* PTT closed by CAT */
|
|
#define VX1700_SF_MEM_SCAN_PAUSE 0x02 /* Scanning paused */
|
|
#define VX1700_SF_MEM_SCAN 0x04 /* Scanning enabled */
|
|
#define VX1700_SF_RTTY_FILTER_NARROW 0x08 /* Narrow RTTY filter selected */
|
|
#define VX1700_SF_CW_FILTER_NARROW 0x10 /* Narrow CW filter selected */
|
|
#define VX1700_SF_RTTY_USB 0x20 /* USB selected for RTTY */
|
|
|
|
// Status Flag 3 Masks
|
|
#define VX1700_SF_10W_TX 0x20 /* 10 Watt TX output selected */
|
|
#define VX1700_SF_TUNER_ON 0x20 /* Antenna Tuner working */
|
|
#define VX1700_SF_TRANSMISSION_ON 0x80 /* Transmission in progress */
|
|
|
|
|
|
/* HAMLIB API implementation */
|
|
static int vx1700_init(RIG *rig);
|
|
static int vx1700_open(RIG *rig);
|
|
static int vx1700_cleanup(RIG *rig);
|
|
static const char * vx1700_get_info(RIG *rig);
|
|
|
|
static int vx1700_set_vfo(RIG *rig, vfo_t vfo);
|
|
static int vx1700_get_vfo(RIG *rig, vfo_t *vfo);
|
|
static int vx1700_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
|
|
static int vx1700_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
|
|
static int vx1700_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq);
|
|
static int vx1700_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq);
|
|
static int vx1700_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
|
|
static int vx1700_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width);
|
|
static int vx1700_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
|
|
static int vx1700_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
|
|
static int vx1700_set_func(RIG *rig, vfo_t vfo, setting_t func, int status);
|
|
static int vx1700_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status);
|
|
static int vx1700_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
|
|
static int vx1700_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
|
|
static int vx1700_set_mem(RIG *rig, vfo_t vfo, int ch);
|
|
static int vx1700_get_mem(RIG *rig, vfo_t vfo, int *ch);
|
|
static int vx1700_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op);
|
|
|
|
#endif /* _VX1700_H */
|