Hamlib/drake/r8b.c

/*
 *  Hamlib Drake backend - R-8B description
 *  Copyright (c) 2001-2004 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "drake.h"


#define R8B_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM|RIG_MODE_ECSS|RIG_MODE_FM)

#define R8B_FUNC (RIG_FUNC_MN|RIG_FUNC_LOCK|RIG_FUNC_NB)

#define R8B_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH)

#define R8B_PARM_ALL (RIG_PARM_TIME)

#define R8B_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_VFO|RIG_VFO_MEM)

#define R8B_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN|RIG_OP_TO_VFO|RIG_OP_FROM_VFO|RIG_OP_MCL|RIG_OP_CPY)

#define R8B_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)

#define R8B_STR_CAL { 16, { \
		{   0, -60 }, \
		{   1, -48 }, \
		{  11, -42 }, \
		{  27, -36 }, \
		{  39, -30 }, \
		{  51, -24 }, \
		{  64, -18 }, \
		{  80, -12 }, \
		{  97, -6 }, \
		{ 116,  0 }, \
		{ 138, 10 }, \
		{ 163, 20 }, \
		{ 195, 30 }, \
		{ 217, 40 }, \
		{ 228, 50 }, \
		{ 255, 60 }, \
	} }

/*
 * channel caps.
 */
#define DRAKE_MEM_CAP {	\
	.freq = 1,	\
	.mode = 1,	\
	.width = 1,	\
	.ant = 1,	\
	.funcs = 1,	\
	.levels = RIG_LEVEL_AGC|RIG_LEVEL_ATT|RIG_LEVEL_PREAMP,	\
	.channel_desc = 1,	\
}

/*
 * R-8B rig capabilities.
 *
 * manual: http://www.rldrake.com/swl/R8B.pdf
 *
 */

const struct rig_caps r8b_caps = {
.rig_model =  RIG_MODEL_DKR8B,
.model_name = "R-8B",
.mfg_name =  "Drake",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_RECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  9600,
.serial_rate_max =  9600,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_HARDWARE,
.write_delay =  0,
.post_write_delay =  1,
.timeout =  200,
.retry =  3,

.has_get_func =  R8B_FUNC,
.has_set_func =  R8B_FUNC,
.has_get_level =  R8B_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(R8B_LEVEL_ALL),
.has_get_parm =  R8B_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(R8B_PARM_ALL),
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { 10, RIG_DBLST_END },
.attenuator =   { 10, RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,	/* TODO: acutally has RIG_TRN_RIG */
.bank_qty =   0,
.chan_desc_sz =  7,
.vfo_ops =  R8B_VFO_OPS,

.chan_list =  {
		{   0,  999, RIG_MTYPE_MEM, DRAKE_MEM_CAP },
		RIG_CHAN_END
	},

.rx_range_list1 =  {
	{kHz(10),MHz(30),R8B_MODES,-1,-1,R8B_VFO,R8B_ANTS},
	RIG_FRNG_END,
  },
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
	{kHz(10),MHz(30),R8B_MODES,-1,-1,R8B_VFO,R8B_ANTS},
	RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },

.tuning_steps =  {
	 {R8B_MODES,10},
	 {R8B_MODES,100},
	 {R8B_MODES,kHz(1)},
	 {R8B_MODES,kHz(10)},
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_FM, kHz(12)},
		{RIG_MODE_AM|RIG_MODE_ECSS, kHz(6)},
		{RIG_MODE_AM|RIG_MODE_ECSS, kHz(4)},
		{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.3)},
		{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(1.8)},
		{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(4)},
		{RIG_MODE_CW, Hz(500)},
		{RIG_MODE_CW, kHz(1.8)},
		RIG_FLT_END,
	},
.str_cal = R8B_STR_CAL,
.priv =  NULL,

.rig_init = drake_init,
.rig_cleanup = drake_cleanup,

.set_freq =  drake_set_freq,
.get_freq =  drake_get_freq,
.set_vfo =  drake_set_vfo,
.get_vfo =  drake_get_vfo,
.set_mode =  drake_set_mode,
.get_mode =  drake_get_mode,
.set_func = drake_set_func,
.get_func = drake_get_func,
.set_level = drake_set_level,
.get_level = drake_get_level,
.set_ant = drake_set_ant,
.get_ant = drake_get_ant,
.set_mem = drake_set_mem,
.get_mem = drake_get_mem,
.set_channel = drake_set_chan,
.get_channel = drake_get_chan,
.vfo_op = drake_vfo_op,
.set_powerstat = drake_set_powerstat,
.get_powerstat = drake_get_powerstat,
.get_info =  drake_get_info,

};

/*
 * Function definitions below
 */