Hamlib/yaesu/ft1000d.c

238 wiersze
8.4 KiB
C

/*
* hamlib - (C) Stephane Fillod 2002-2009 (fillods at users.sourceforge.net)
*
* ft1000d.c - (C) Berndt Josef Wulf (wulf at ping.net.au)
*
* This shared library provides an API for communicating
* via serial interface to an FT-1000D using the "CAT" interface
*
*
* $Id: ft1000d.c,v 1.2 2009-02-20 15:21:52 fillods Exp $
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "ft990.h"
/* Receiver caps */
#define FT1000D_ALL_RX_MODES (RIG_MODE_LSB|RIG_MODE_USB|RIG_MODE_CW|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define FT1000D_SSB_CW_RX_MODES (RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB)
#define FT1000D_RTTY_RX_MODES (RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define FT1000D_AM_RX_MODES (RIG_MODE_AM)
#define FT1000D_FM_RX_MODES (RIG_MODE_FM)
/* TX caps */
#define FT1000D_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM) /* 100 W class */
#define FT1000D_AM_TX_MODES (RIG_MODE_AM ) /* set 25W max */
/* Other features */
#define FT1000D_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
#define FT1000D_ANTS 0
/* Timing values in mS */
#define FT1000D_WRITE_DELAY 50
/* Delay sequential fast writes */
#define FT1000D_POST_WRITE_DELAY 5
#define FT1000D_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.rit = 1, \
.xit = 1, \
.rptr_shift = 1, \
.flags = 1, \
}
/*
* FT1000D rigs capabilities.
*
* Right now, this backend is a clone of the FT990 backend.
*
* If someone with an FT1000D can test and confirm hamlib working using the
* existing FT990 support (-m 116) we perhaps could add support for this rig.
* According to the documentation at hand, the protocol for the FT1000D is,
* with the exception of dual VFO operation, identical to the FT990.
*
* Essentially the differences are:
* - additional commands concerning dual band operation
* - additional 8 channels in update packet giving a total of 1636 bytes
* - flags byte 1 bit 1 - dual receive operation instead of VFO B in use
* - flags byte 1 bit 2 - Antenna now tuning instead of fast tuning rate
* - flags byte 1 bit 4 - VFO B in use (RX or TX) instead of antenna tuning
* - flags byte 3 bit 7 - Sub VFO tuning know locked instead of sidetone active
*/
const struct rig_caps ft1000d_caps = {
.rig_model = RIG_MODEL_FT1000D,
.model_name = "FT-1000D",
.mfg_name = "Yaesu",
.version = "0.0.6",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = FT1000D_WRITE_DELAY,
.post_write_delay = FT1000D_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 0,
.has_get_func = RIG_FUNC_LOCK | RIG_FUNC_TUNER | RIG_FUNC_MON,
.has_set_func = RIG_FUNC_LOCK | RIG_FUNC_TUNER,
.has_get_level = RIG_LEVEL_STRENGTH | RIG_LEVEL_SWR | RIG_LEVEL_ALC | \
RIG_LEVEL_ALC | RIG_LEVEL_RFPOWER,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_BACKLIGHT,
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1200),
.vfo_ops = RIG_OP_CPY | RIG_OP_FROM_VFO | RIG_OP_TO_VFO |
RIG_OP_UP | RIG_OP_DOWN | RIG_OP_TUNE | RIG_OP_TOGGLE,
.targetable_vfo = RIG_TARGETABLE_ALL,
.transceive = RIG_TRN_OFF, /* Yaesus have to be polled, sigh */
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{1, 99, RIG_MTYPE_MEM, FT1000D_MEM_CAP},
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100), MHz(30), FT1000D_ALL_RX_MODES, -1, -1, FT1000D_VFO_ALL, FT1000D_ANTS}, /* General coverage + ham */
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FT1000D_OTHER_TX_MODES, W(5), W(100), FT1000D_VFO_ALL, FT1000D_ANTS),
FRQ_RNG_HF(1, FT1000D_AM_TX_MODES, W(2), W(25), FT1000D_VFO_ALL, FT1000D_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(100), MHz(30), FT1000D_ALL_RX_MODES, -1, -1, FT1000D_VFO_ALL, FT1000D_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FT1000D_OTHER_TX_MODES, W(5), W(100), FT1000D_VFO_ALL, FT1000D_ANTS),
FRQ_RNG_HF(2, FT1000D_AM_TX_MODES, W(2), W(25), FT1000D_VFO_ALL, FT1000D_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FT1000D_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FT1000D_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FT1000D_AM_RX_MODES, Hz(100)}, /* Normal */
{FT1000D_AM_RX_MODES, kHz(1)}, /* Fast */
{FT1000D_FM_RX_MODES, Hz(100)}, /* Normal */
{FT1000D_FM_RX_MODES, kHz(1)}, /* Fast */
{FT1000D_RTTY_RX_MODES, Hz(10)}, /* Normal */
{FT1000D_RTTY_RX_MODES, Hz(100)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{RIG_MODE_SSB, RIG_FLT_ANY}, /* Enable all filters for SSB */
{RIG_MODE_CW, RIG_FLT_ANY}, /* Enable all filters for CW */
{RIG_MODE_AM, kHz(6)}, /* normal AM filter */
{RIG_MODE_AM, kHz(2.4)}, /* AM filter with narrow selection (SSB filter switched in) */
{RIG_MODE_FM, kHz(8)}, /* FM standard filter */
{RIG_MODE_RTTY, RIG_FLT_ANY}, /* Enable all filters for RTTY */
{RIG_MODE_RTTYR,RIG_FLT_ANY}, /* Enable all filters for Reverse RTTY */
{RIG_MODE_PKTLSB,RIG_FLT_ANY}, /* Enable all filters for Packet Radio LSB */
{RIG_MODE_PKTFM,kHz(8)}, /* FM standard filter for Packet Radio FM */
RIG_FLT_END,
},
.priv = NULL, /* private data FIXME: */
.rig_init = ft990_init,
.rig_cleanup = ft990_cleanup,
.rig_open = ft990_open, /* port opened */
.rig_close = ft990_close, /* port closed */
.set_freq = ft990_set_freq,
.get_freq = ft990_get_freq,
.set_mode = ft990_set_mode,
.get_mode = ft990_get_mode,
.set_vfo = ft990_set_vfo,
.get_vfo = ft990_get_vfo,
.set_ptt = ft990_set_ptt,
.get_ptt = ft990_get_ptt,
.set_rptr_shift = ft990_set_rptr_shift,
.get_rptr_shift = ft990_get_rptr_shift,
.set_rptr_offs = ft990_set_rptr_offs,
.set_split_vfo = ft990_set_split_vfo,
.get_split_vfo = ft990_get_split_vfo,
.set_rit = ft990_set_rit,
.get_rit = ft990_get_rit,
.set_xit = ft990_set_xit,
.get_xit = ft990_get_xit,
.set_func = ft990_set_func,
.get_func = ft990_get_func,
.set_parm = ft990_set_parm,
.get_level = ft990_get_level,
.set_mem = ft990_set_mem,
.get_mem = ft990_get_mem,
.vfo_op = ft990_vfo_op,
.set_channel = ft990_set_channel,
.get_channel = ft990_get_channel,
};