..
Android.mk
Change all to remove HAVE_CONFIG dependency and include <hamlib/config.h> by default
2022-02-04 07:41:36 -06:00
Makefile.am
Fix make dist error
2023-07-20 11:23:06 -05:00
amp_conf.c
Add RTS/DTR capability to rotctl and ampctl
2023-07-20 11:58:26 -05:00
amp_conf.h
Change sprintf to snprint in amp_conf.c
2022-01-09 17:46:07 -06:00
amp_reg.c
Progress on Expert ampctl
2023-03-28 17:23:54 -05:00
amp_settings.c
Remove unused includes
2022-07-24 17:08:57 +02:00
amplifier.c
Fix dtr/rts serial port set for amp and rot
2023-07-20 17:46:39 -05:00
cache.c
Add current_vfo to cache debug statement
2023-07-07 22:22:57 -05:00
cache.h
Initial implementation of: reader thread for async handling of rig data, UDP multicast publisher routine and rig state poll thread routine. The reader thread can correctly handle asynchronous data, such as transceive or spectrum data. Work in progress: multi-platform code for I/O routines still missing and the poll routine is not yet in use. Tested briefly on an IC-7300 so far.
2021-11-28 20:52:29 +02:00
cal.c
Change all to remove HAVE_CONFIG dependency and include <hamlib/config.h> by default
2022-02-04 07:41:36 -06:00
cal.h
Add new levels: RFPOWER_METER, COMP_METER, VD_METER and ID_METER, supported at least by most of recent Icom rigs. Add level NOTCHF_RAW for manual notch frequency without specified unit for Icom rigs. Add level MONITOR_GAIN. Add functions DUAL_WATCH and DIVERSITY, supported now by K3/K3S. Fix VOXDELAY level commands for many Icom rigs. Add MONITOR_GAIN level for Icom rigs. Fix and add many K3 commands and add specific rig models for K3S, KX2 and KX3 -- they are very similar to K3, but have slight differences. Extend dump_caps output for rigctl: add complete details of ext levels and frequency ranges. Tests have been performed on IC-7000, IC-756ProIII, IC-7300, IC-7600 and K3.
2019-05-30 09:37:49 +03:00
cm108.c
Add gpio command to rigctl(d) usable with pttport setting CM108
2023-07-22 10:32:25 -05:00
cm108.h
Reformatted src directory
2017-08-09 06:14:31 -05:00
conf.c
Move serial_cfg_params to common inlude fill as it is applicate to all serial devices
2023-07-20 11:12:24 -05:00
debug.c
Change anytone.c to use bluetooth protocol
2023-06-04 15:56:01 -05:00
event.c
Disable use_cached_freq/mode for Icom rigs -- we can't tell which VFO we're on
2023-07-23 09:19:25 -05:00
event.h
Initial implementation of: reader thread for async handling of rig data, UDP multicast publisher routine and rig state poll thread routine. The reader thread can correctly handle asynchronous data, such as transceive or spectrum data. Work in progress: multi-platform code for I/O routines still missing and the poll routine is not yet in use. Tested briefly on an IC-7300 so far.
2021-11-28 20:52:29 +02:00
ext.c
Remove unused includes
2022-07-24 17:08:57 +02:00
extamp.c
Remove unused includes
2022-07-24 17:08:57 +02:00
fifo.c
Fix CW morse infinite loop when error occurs RIG_EINVAL
2023-08-18 22:35:21 -05:00
fifo.h
Add fifo peek
2023-07-17 10:26:47 -05:00
gpio.c
Add gpio command to rigctl(d) usable with pttport setting CM108
2023-07-22 10:32:25 -05:00
gpio.h
Add GPIO and GPION options for DCD.
2018-03-29 23:55:25 +02:00
hamlibdatetime.h.in
Move hamlibdatetime.h generation to src directory
2021-03-19 23:14:13 -05:00
idx_builtin.h
Add KEYERTYPE for IC-7300, IC-705, IC-9700
2023-08-17 17:52:03 -05:00
iofunc.c
Reduce debug in iofunc.c
2023-07-19 08:24:56 -05:00
iofunc.h
Add flushing of rig port, including async data pipes, after \send_raw and \send_cmd to drain any extra rig responses
2023-05-13 00:04:37 +03:00
locator.c
Remove unused includes
2022-07-24 17:08:57 +02:00
mem.c
Remove unused includes of fcntl.h
2022-12-09 14:06:59 +01:00
microham.c
Remove unused includes of errno.h
2022-12-09 12:32:54 +01:00
microham.h
Add uh_wkey_close to microham.h
2020-01-13 07:27:41 -06:00
misc.c
Add KEYERTYPE for IC-7300, IC-705, IC-9700
2023-08-17 17:52:03 -05:00
misc.h
Add parm BANDSELECT for Yaesu rigs
2023-08-11 10:40:42 -05:00
multicast.c
Comment out unused var
2023-07-07 22:12:55 -05:00
network.c
astyle files for 4.5 release
2022-07-27 17:16:17 -05:00
network.h
Initial implementation of: reader thread for async handling of rig data, UDP multicast publisher routine and rig state poll thread routine. The reader thread can correctly handle asynchronous data, such as transceive or spectrum data. Work in progress: multi-platform code for I/O routines still missing and the poll routine is not yet in use. Tested briefly on an IC-7300 so far.
2021-11-28 20:52:29 +02:00
neverused.c
Enable --show-conf for ampctl and ampctld
2023-03-18 10:25:36 +01:00
par_nt.h
Formatted src/ to final coding guidelines
2017-10-04 21:32:08 -05:00
parallel.c
Fix mingw compile warnings
2023-05-07 17:27:31 -05:00
parallel.h
Add --disable-parallel configure option
2022-12-09 23:35:03 -06:00
register.c
Fix anytone thread deletion
2023-05-30 22:10:19 -05:00
register.h
Add config.h to include/hamlib so HAVE_PTHREAD is available if needed
2022-02-03 22:31:42 -06:00
rig.c
Increase send_morse size to use maximum for rigs or 20 chars (if morse_qsize unknown)
2023-08-19 12:36:07 -05:00
rot_conf.c
Add RTS/DTR capability to rotctl and ampctl
2023-07-20 11:58:26 -05:00
rot_conf.h
Add rot_get_conf2 function to eventually replace rot_get_conf
2022-01-09 11:16:41 -06:00
rot_ext.c
Change all to remove HAVE_CONFIG dependency and include <hamlib/config.h> by default
2022-02-04 07:41:36 -06:00
rot_reg.c
Inital add of rotator saebrtrack
2023-03-10 13:03:14 -05:00
rot_settings.c
Remove unused includes of cal.h
2022-12-09 17:39:43 +01:00
rotator.c
Fix dtr/rts serial port set for amp and rot
2023-07-20 17:46:39 -05:00
serial.c
Add parm BANDSELECT for Yaesu rigs
2023-08-11 10:40:42 -05:00
serial.h
Update LGPL header in src source files.
2011-08-22 21:38:37 -05:00
serial_cfg_params.h
Move serial_cfg_params to common inlude fill as it is applicate to all serial devices
2023-07-20 11:12:24 -05:00
settings.c
Fix set_split_mode for Icom rigs
2023-07-18 12:37:54 -05:00
sleep.c
Fix silly error in sleep.c
2023-06-08 09:03:04 -05:00
sleep.h
Fix MSVC compile by removing unistd.h and defining our own rig_useconds_t
2020-06-13 17:40:47 -05:00
snapshot_data.c
Balance RETURNFUNC2 in snapshot_data.c
2022-02-13 16:17:41 -06:00
snapshot_data.h
Initial implementation of: reader thread for async handling of rig data, UDP multicast publisher routine and rig state poll thread routine. The reader thread can correctly handle asynchronous data, such as transceive or spectrum data. Work in progress: multi-platform code for I/O routines still missing and the poll routine is not yet in use. Tested briefly on an IC-7300 so far.
2021-11-28 20:52:29 +02:00
sprintflst.c
Fix parm_gran
2023-08-17 16:04:45 -05:00
sprintflst.h
Bump up some 1024 buffers to 2048 to avoid overflow error
2023-07-21 11:46:58 -05:00
token.h
Make retries in case of read timeout optional and configurable via set-conf option. When not absolutely necessary, they will significantly slow down flushing and normal serial communications with a rig
2023-05-14 11:52:48 +03:00
tones.c
Fix typos
2023-03-19 22:20:28 +01:00
tones.h
Clean up mingw compiler warning for tones.h
2021-04-29 17:16:51 -05:00
usb_port.c
Remove unused includes of errno.h
2022-12-09 12:32:54 +01:00
usb_port.h
Update LGPL header in src source files.
2011-08-22 21:38:37 -05:00
version_dll.rc
Full version info now available for Windows File/Properties/Details
2022-12-23 17:44:44 -06:00