Hamlib/rigs/icom/perseus.c

206 wiersze
5.4 KiB
C

/*
* Hamlib CI-V backend - Perseus description
* Copyright (c) 2016 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <stdlib.h>
#include <hamlib/rig.h>
#include "icom.h"
#include "frame.h"
/* TODO: $09 DRM, $0a USER */
#define PERSEUS_MODES (RIG_MODE_AM|RIG_MODE_SAM|RIG_MODE_SSB| \
RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR| \
RIG_MODE_FM)
#define PERSEUS_FUNCS (RIG_FUNC_NONE)
/* TODO (not standard) :
* RIG_LEVEL_AGC|RIG_LEVEL_NB|RIG_LEVEL_ANR|RIG_LEVEL_ANR|RIG_LEVEL_AF|RIG_LEVEL_ANF
*/
#define PERSEUS_LEVELS (RIG_LEVEL_ATT|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR)
#define PERSEUS_PARMS (RIG_PARM_NONE)
/* S-Meter calibration, according to the Reference Manual */
#define PERSEUS_STR_CAL { 2, \
{ \
{ 0, -67 }, /* -140 dBm */ \
{ 255, 103 }, /* +30 dBm */ \
} }
static int perseus_r2i_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width,
unsigned char *md, signed char *pd);
static void perseus_i2r_mode(RIG *rig, unsigned char md, int pd,
rmode_t *mode, pbwidth_t *width);
static struct icom_priv_caps perseus_priv_caps =
{
0xE1, /* default address */
0, /* 731 mode */
0, /* no XCHG */
.r2i_mode = perseus_r2i_mode,
.i2r_mode = perseus_i2r_mode,
};
/*
* PERSEUS rigs capabilities.
*
* PERSEUS Receiver CAT Interface Reference Manual (Revision EN03) :
* http://microtelecom.it/perseus/PERSEUS_CI-V_Interface-EN03.pdf
*/
const struct rig_caps perseus_caps =
{
RIG_MODEL(RIG_MODEL_PERSEUS),
.model_name = "Perseus",
.mfg_name = "Microtelecom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_PCRECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = PERSEUS_FUNCS,
.has_set_func = PERSEUS_FUNCS,
.has_get_level = PERSEUS_LEVELS,
.has_set_level = RIG_LEVEL_SET(PERSEUS_LEVELS),
.has_get_parm = PERSEUS_PARMS,
.has_set_parm = PERSEUS_PARMS,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { 10, 20, 30, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = RIG_OP_NONE,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(10), MHz(30), PERSEUS_MODES, -1, -1, RIG_VFO_A},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(10), MHz(30), PERSEUS_MODES, -1, -1, RIG_VFO_A},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
.tuning_steps = {
{PERSEUS_MODES, 100}, /* resolution */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_AM | RIG_MODE_SAM, kHz(8)},
{RIG_MODE_FM, kHz(15)},
RIG_FLT_END,
},
.str_cal = PERSEUS_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& perseus_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_open,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_level = icom_set_level,
.get_level = icom_get_level,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* Function definitions below
*/
/*
* This function does the special bandwidth coding for the Perseus
*
* NB: the filter width will be ignored.
*/
static int perseus_r2i_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width,
unsigned char *md, signed char *pd)
{
int err;
err = rig2icom_mode(rig, vfo, mode, width, md, pd);
if (err == 0 && mode == RIG_MODE_SAM)
{
*md = 0x06;
}
return err;
}
static void perseus_i2r_mode(RIG *rig, unsigned char md, int pd,
rmode_t *mode, pbwidth_t *width)
{
icom2rig_mode(rig, md, pd, mode, width);
if (md == 0x06)
{
*mode = RIG_MODE_SAM;
}
}