Hamlib/tests/rigctl.c

372 wiersze
9.5 KiB
C

/*
* rigctl.c - (C) Stephane Fillod 2000-2009
*
* This program test/control a radio using Hamlib.
* It takes commands in interactive mode as well as
* from command line options.
*
* $Id: rigctl.c,v 1.70 2009-01-04 14:49:17 fillods Exp $
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <ctype.h>
#include <errno.h>
#include <getopt.h>
#include <hamlib/rig.h>
#include "misc.h"
#include "iofunc.h"
#include "serial.h"
#include "sprintflst.h"
#include "rigctl_parse.h"
#define MAXNAMSIZ 32
#define MAXNBOPT 100 /* max number of different options */
void usage(void);
/*
* Reminder: when adding long options,
* keep up to date SHORT_OPTIONS, usage()'s output and man page. thanks.
* NB: do NOT use -W since it's reserved by POSIX.
* TODO: add an option to read from a file
*/
#define SHORT_OPTIONS "m:r:p:d:P:D:s:c:t:lC:LuovhV"
static struct option long_options[] =
{
{"model", 1, 0, 'm'},
{"rig-file", 1, 0, 'r'},
{"ptt-file", 1, 0, 'p'},
{"dcd-file", 1, 0, 'd'},
{"ptt-type", 1, 0, 'P'},
{"dcd-type", 1, 0, 'D'},
{"serial-speed", 1, 0, 's'},
{"civaddr", 1, 0, 'c'},
{"send-cmd-term", 1, 0, 't'},
{"list", 0, 0, 'l'},
{"set-conf", 1, 0, 'C'},
{"show-conf", 0, 0, 'L'},
{"dump-caps", 0, 0, 'u'},
{"vfo", 0, 0, 'o'},
{"verbose", 0, 0, 'v'},
{"help", 0, 0, 'h'},
{"version", 0, 0, 'V'},
{0, 0, 0, 0}
};
#define MAXCONFLEN 128
int interactive = 1; /* if no cmd on command line, switch to interactive */
int prompt = 1; /* Print prompt in rigctl */
int opt_end = 0; /* only used by rigctld */
int vfo_mode = 0; /* vfo_mode = 0 means target VFO is 'currVFO' */
char send_cmd_term = '\r'; /* send_cmd termination char */
int main (int argc, char *argv[])
{
RIG *my_rig; /* handle to rig (nstance) */
rig_model_t my_model = RIG_MODEL_DUMMY;
int retcode; /* generic return code from functions */
int exitcode;
int verbose = 0;
int show_conf = 0;
int dump_caps_opt = 0;
const char *rig_file=NULL, *ptt_file=NULL, *dcd_file=NULL;
ptt_type_t ptt_type = RIG_PTT_NONE;
dcd_type_t dcd_type = RIG_DCD_NONE;
int serial_rate = 0;
char *civaddr = NULL; /* NULL means no need to set conf */
char conf_parms[MAXCONFLEN] = "";
while(1) {
int c;
int option_index = 0;
c = getopt_long (argc, argv, SHORT_OPTIONS,
long_options, &option_index);
if (c == -1)
break;
switch(c) {
case 'h':
usage();
exit(0);
case 'V':
version();
exit(0);
case 'm':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
my_model = atoi(optarg);
break;
case 'r':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
rig_file = optarg;
break;
case 'p':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
ptt_file = optarg;
break;
case 'd':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
dcd_file = optarg;
break;
case 'P':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
if (!strcmp(optarg, "RIG"))
ptt_type = RIG_PTT_RIG;
else if (!strcmp(optarg, "DTR"))
ptt_type = RIG_PTT_SERIAL_DTR;
else if (!strcmp(optarg, "RTS"))
ptt_type = RIG_PTT_SERIAL_RTS;
else if (!strcmp(optarg, "PARALLEL"))
ptt_type = RIG_PTT_PARALLEL;
else if (!strcmp(optarg, "NONE"))
ptt_type = RIG_PTT_NONE;
else
ptt_type = atoi(optarg);
break;
case 'D':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
if (!strcmp(optarg, "RIG"))
dcd_type = RIG_DCD_RIG;
else if (!strcmp(optarg, "DSR"))
dcd_type = RIG_DCD_SERIAL_DSR;
else if (!strcmp(optarg, "CTS"))
dcd_type = RIG_DCD_SERIAL_CTS;
else if (!strcmp(optarg, "CD"))
dcd_type = RIG_DCD_SERIAL_CAR;
else if (!strcmp(optarg, "PARALLEL"))
dcd_type = RIG_DCD_PARALLEL;
else if (!strcmp(optarg, "NONE"))
dcd_type = RIG_DCD_NONE;
else
dcd_type = atoi(optarg);
break;
case 'c':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
civaddr = optarg;
break;
case 't':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
if (strlen(optarg) > 1)
send_cmd_term = strtol(optarg, NULL, 0);
else
send_cmd_term = optarg[0];
break;
case 's':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
serial_rate = atoi(optarg);
break;
case 'C':
if (!optarg) {
usage(); /* wrong arg count */
exit(1);
}
if (*conf_parms != '\0')
strcat(conf_parms, ",");
strncat(conf_parms, optarg, MAXCONFLEN-strlen(conf_parms));
break;
case 'o':
vfo_mode++;
break;
case 'v':
verbose++;
break;
case 'L':
show_conf++;
break;
case 'l':
list_models();
exit(0);
case 'u':
dump_caps_opt++;
break;
default:
usage(); /* unknown option? */
exit(1);
}
}
rig_set_debug(verbose);
rig_debug(RIG_DEBUG_VERBOSE, "rigctl, %s\n", hamlib_version);
rig_debug(RIG_DEBUG_VERBOSE, "Report bugs to "
"<hamlib-developer@lists.sourceforge.net>\n\n");
/*
* at least one command on command line,
* disable interactive mode
*/
if (optind < argc)
interactive = 0;
my_rig = rig_init(my_model);
if (!my_rig) {
fprintf(stderr, "Unknown rig num %d, or initialization error.\n",
my_model);
fprintf(stderr, "Please check with --list option.\n");
exit(2);
}
retcode = set_conf(my_rig, conf_parms);
if (retcode != RIG_OK) {
fprintf(stderr, "Config parameter error: %s\n", rigerror(retcode));
exit(2);
}
if (rig_file)
strncpy(my_rig->state.rigport.pathname, rig_file, FILPATHLEN);
/*
* ex: RIG_PTT_PARALLEL and /dev/parport0
*/
if (ptt_type != RIG_PTT_NONE)
my_rig->state.pttport.type.ptt = ptt_type;
if (dcd_type != RIG_DCD_NONE)
my_rig->state.dcdport.type.dcd = dcd_type;
if (ptt_file)
strncpy(my_rig->state.pttport.pathname, ptt_file, FILPATHLEN);
if (dcd_file)
strncpy(my_rig->state.dcdport.pathname, dcd_file, FILPATHLEN);
/* FIXME: bound checking and port type == serial */
if (serial_rate != 0)
my_rig->state.rigport.parm.serial.rate = serial_rate;
if (civaddr)
rig_set_conf(my_rig, rig_token_lookup(my_rig, "civaddr"), civaddr);
/*
* print out conf parameters
*/
if (show_conf) {
dumpconf(my_rig, stdout);
}
/*
* print out capabilities, and exists immediately
* We may be interested only in only caps, and rig_open may fail.
*/
if (dump_caps_opt) {
dumpcaps(my_rig, stdout);
rig_cleanup(my_rig); /* if you care about memory */
exit(0);
}
retcode = rig_open(my_rig);
if (retcode != RIG_OK) {
fprintf(stderr,"rig_open: error = %s \n", rigerror(retcode));
exit(2);
}
if (verbose > 0)
printf("Opened rig model %d, '%s'\n", my_rig->caps->rig_model,
my_rig->caps->model_name);
rig_debug(RIG_DEBUG_VERBOSE, "Backend version: %s, Status: %s\n",
my_rig->caps->version, rig_strstatus(my_rig->caps->status));
exitcode = 0;
do {
retcode = rigctl_parse(my_rig, stdin, stdout, argv, argc);
if (retcode == 2)
exitcode = 2;
}
while (retcode == 0 || retcode == 2);
rig_close(my_rig); /* close port */
rig_cleanup(my_rig); /* if you care about memory */
return exitcode;
}
void usage(void)
{
printf("Usage: rigctl [OPTION]... [COMMAND]...\n"
"Send COMMANDs to a connected radio transceiver or receiver.\n\n");
printf(
" -m, --model=ID select radio model number. See model list\n"
" -r, --rig-file=DEVICE set device of the radio to operate on\n"
" -p, --ptt-file=DEVICE set device of the PTT device to operate on\n"
" -d, --dcd-file=DEVICE set device of the DCD device to operate on\n"
" -P, --ptt-type=TYPE set type of the PTT device to operate on\n"
" -D, --dcd-type=TYPE set type of the DCD device to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -c, --civaddr=ID set CI-V address, decimal (for Icom rigs only)\n"
" -t, --send-cmd-term=CHAR set send_cmd command termination char\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -L, --show-conf list all config parameters\n"
" -l, --list list all model numbers and exit\n"
" -u, --dump-caps dump capabilities and exit\n"
" -o, --vfo do not default to VFO_CURR, require extra vfo arg\n"
" -v, --verbose set verbose mode, cumulative\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n"
);
usage_rig(stdout);
printf("\nReport bugs to <hamlib-developer@lists.sourceforge.net>.\n");
}