Hamlib/rigs/elad/fdm_duo.c

497 wiersze
15 KiB
C

/*
* Hamlib ELAD backend - FDM_DUO description
* Copyright (c) 2000-2004 by Stephane Fillod and Juergen Rinas
* Copyright (c) 2018 by Giovanni Franza HB9EIK
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <stdio.h>
#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "elad.h"
#define FDM_DUO_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define FDM_DUO_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define FDM_DUO_AM_TX_MODES RIG_MODE_AM
#define FDM_DUO_VFO (RIG_VFO_A|RIG_VFO_B)
#define FDM_DUO_LEVEL_ALL (RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|RIG_LEVEL_AGC)
#define FDM_DUO_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_NR|RIG_FUNC_NR|RIG_FUNC_BC)
/*
* elad_fdm_duo_get_info
* Assumes rig!=NULL
*/
static const char *
elad_fdm_duo_get_info(RIG *rig)
{
char firmbuf[50];
int retval;
size_t firm_len;
retval = elad_transaction(rig, "TY", firmbuf, sizeof(firmbuf));
if (retval != RIG_OK)
{
return NULL;
}
firm_len = strlen(firmbuf);
if (firm_len != 5)
{
rig_debug(RIG_DEBUG_ERR, "elad_get_info: wrong answer len=%d\n", (int)firm_len);
return NULL;
}
switch (firmbuf[4])
{
case '0':
return "FDM-DUOHX (200W)";
case '1':
return "FDM-DUOSAT (100W + AT)";
case '2':
return "Japanese 50W type";
case '3':
return "Japanese 20W type";
default:
return "Firmware: unknown";
}
}
/*
* elad_fdm_duo_set_level
* Assumes rig!=NULL
*
* set levels of most functions
*
* WARNING: the commands differ slightly from the general versions in elad.c
* e.g.: "SQ"=>"SQ0" , "AG"=>"AG0"
*/
int
elad_fdm_duo_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
char levelbuf[16];
int elad_val;
switch (level)
{
case RIG_LEVEL_RFPOWER:
elad_val = val.f * 100; /* level for FDM_DUOSAT is from 0.. 100W in SSB */
sprintf(levelbuf, "PC%03d", elad_val);
break;
case RIG_LEVEL_AF:
elad_val = val.f * 255; /* possible values for FDM_DUO are 000.. 255 */
sprintf(levelbuf, "AG0%03d", elad_val);
break;
case RIG_LEVEL_RF:
elad_val = val.f * 100; /* possible values for FDM_DUO are 000.. 100 */
sprintf(levelbuf, "RG%03d", elad_val);
break;
case RIG_LEVEL_SQL:
elad_val = val.f * 255; /* possible values for FDM_DUO are 000.. 255 */
sprintf(levelbuf, "SQ0%03d", elad_val);
break;
case RIG_LEVEL_AGC: /* possible values for FDM_DUO 000(=off), 001(=fast), 002(=slow) */
/* hamlib argument is int, possible values rig.h:enum agc_level_e */
switch (val.i)
{
case RIG_AGC_OFF:
elad_val = 0;
break;
case RIG_AGC_FAST:
elad_val = 1;
break;
case RIG_AGC_SLOW:
elad_val = 2;
break;
default:
rig_debug(RIG_DEBUG_ERR, "%s: Unsupported agc value", __func__);
return -RIG_EINVAL;
};
sprintf(levelbuf, "GT%03d", elad_val);
break;
default:
rig_debug(RIG_DEBUG_ERR, "%s: Unsupported set_level %s", __func__,
rig_strlevel(level));
return -RIG_EINVAL;
}
return elad_transaction(rig, levelbuf, NULL, 0);
}
/*
* elad_get_level
* Assumes rig!=NULL, val!=NULL
*/
int
elad_fdm_duo_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
char ackbuf[50];
size_t ack_len;
int levelint;
int retval;
switch (level)
{
case RIG_LEVEL_RFPOWER:
retval = elad_transaction(rig, "PC", ackbuf, sizeof(ackbuf));
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (5 != ack_len)
{
return -RIG_EPROTO;
}
if (1 != sscanf(&ackbuf[2], "%d", &levelint))
{
return -RIG_EPROTO;
}
val->f = (float) levelint / 100.;
return RIG_OK;
case RIG_LEVEL_AF:
retval = elad_transaction(rig, "AG0", ackbuf, sizeof(ackbuf));
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (6 != ack_len)
{
return -RIG_EPROTO;
}
if (1 != sscanf(&ackbuf[3], "%d", &levelint))
{
return -RIG_EPROTO;
}
val->f = (float) levelint / 255.;
return RIG_OK;
case RIG_LEVEL_RF:
retval = elad_transaction(rig, "RG", ackbuf, sizeof(ackbuf));
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (5 != ack_len)
{
return -RIG_EPROTO;
}
if (1 != sscanf(&ackbuf[2], "%d", &levelint))
{
return -RIG_EPROTO;
}
val->f = (float) levelint / 100.;
return RIG_OK;
case RIG_LEVEL_SQL:
retval = elad_transaction(rig, "SQ0", ackbuf, sizeof(ackbuf));
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (6 != ack_len)
{
return -RIG_EPROTO;
}
if (1 != sscanf(&ackbuf[3], "%d", &levelint))
{
return -RIG_EPROTO;
}
val->f = (float) levelint / 255.;
return RIG_OK;
case RIG_LEVEL_AGC:
retval = elad_transaction(rig, "GT", ackbuf, sizeof(ackbuf));
if (RIG_OK != retval)
{
return retval;
}
ack_len = strlen(ackbuf);
if (5 != ack_len)
{
return -RIG_EPROTO;
}
switch (ackbuf[4])
{
case '0':
val->i = RIG_AGC_OFF;
break;
case '1':
val->i = RIG_AGC_FAST;
break;
case '2':
val->i = RIG_AGC_SLOW;
break;
default:
return -RIG_EPROTO;
}
return RIG_OK;
case RIG_LEVEL_MICGAIN:
case RIG_LEVEL_PREAMP:
case RIG_LEVEL_IF:
case RIG_LEVEL_APF:
case RIG_LEVEL_NR:
case RIG_LEVEL_PBT_IN:
case RIG_LEVEL_PBT_OUT:
case RIG_LEVEL_CWPITCH:
case RIG_LEVEL_KEYSPD:
case RIG_LEVEL_NOTCHF:
case RIG_LEVEL_COMP:
case RIG_LEVEL_BKINDL:
case RIG_LEVEL_BALANCE:
return -RIG_ENIMPL;
default:
rig_debug(RIG_DEBUG_ERR, "Unsupported get_level %s", rig_strlevel(level));
return -RIG_EINVAL;
}
return RIG_OK; /* never reached */
}
static struct elad_priv_caps fdm_duo_priv_caps =
{
.cmdtrm = EOM_KEN,
};
/*
* fdm_duo rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*/
const struct rig_caps fdm_duo_caps =
{
RIG_MODEL(RIG_MODEL_ELAD_FDM_DUO),
.model_name = "FDM-DUO",
.mfg_name = "ELAD",
.version = BACKEND_VER ".5",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG_MICDATA,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 115200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 10,
.preamp = {12, RIG_DBLST_END,},
.attenuator = {12, RIG_DBLST_END,},
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.rx_range_list1 = {
{kHz(100), Hz(59999999), FDM_DUO_ALL_MODES, -1, -1, FDM_DUO_VFO},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 1 */
.tx_range_list1 = {
{kHz(1810), kHz(1850), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO}, /* 100W class */
{kHz(1810), kHz(1850), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO}, /* 25W class */
{kHz(3500), kHz(3800), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(3500), kHz(3800), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(7), kHz(7200), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(7), kHz(7200), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{kHz(10100), kHz(10150), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(10100), kHz(10150), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(14), kHz(14350), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(14), kHz(14350), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{kHz(18068), kHz(18168), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(18068), kHz(18168), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(21), kHz(21450), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(21), kHz(21450), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{kHz(24890), kHz(24990), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(24890), kHz(24990), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(28), kHz(29700), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(28), kHz(29700), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(50), kHz(52000), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(50), kHz(52000), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 1 */
.rx_range_list2 = {
{kHz(100), Hz(59999999), FDM_DUO_ALL_MODES, -1, -1, FDM_DUO_VFO},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 2 */
.tx_range_list2 = {
{kHz(1800), MHz(2) - 1, FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO}, /* 100W class */
{kHz(1800), MHz(2) - 1, FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO}, /* 25W class */
{kHz(3500), MHz(4) - 1, FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(3500), MHz(4) - 1, FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{kHz(5250), kHz(5450), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(5250), kHz(5450), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(7), kHz(7300), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(7), kHz(7300), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{kHz(10100), kHz(10150), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(10100), kHz(10150), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(14), kHz(14350), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(14), kHz(14350), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{kHz(18068), kHz(18168), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(18068), kHz(18168), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(21), kHz(21450), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(21), kHz(21450), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{kHz(24890), kHz(24990), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{kHz(24890), kHz(24990), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(28), kHz(29700), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(28), kHz(29700), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
{MHz(50), kHz(52000), FDM_DUO_OTHER_TX_MODES, 5000, 100000, FDM_DUO_VFO},
{MHz(50), kHz(52000), FDM_DUO_AM_TX_MODES, 5000, 25000, FDM_DUO_VFO},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 2 */
.tuning_steps = {
{FDM_DUO_ALL_MODES, kHz(1)},
{FDM_DUO_ALL_MODES, Hz(2500)},
{FDM_DUO_ALL_MODES, kHz(5)},
{FDM_DUO_ALL_MODES, Hz(6250)},
{FDM_DUO_ALL_MODES, kHz(10)},
{FDM_DUO_ALL_MODES, Hz(12500)},
{FDM_DUO_ALL_MODES, kHz(15)},
{FDM_DUO_ALL_MODES, kHz(20)},
{FDM_DUO_ALL_MODES, kHz(25)},
{FDM_DUO_ALL_MODES, kHz(30)},
{FDM_DUO_ALL_MODES, kHz(100)},
{FDM_DUO_ALL_MODES, kHz(500)},
{FDM_DUO_ALL_MODES, MHz(1)},
{FDM_DUO_ALL_MODES, 0}, /* any tuning step */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_CW, Hz(200)},
{RIG_MODE_RTTY, Hz(500)},
{RIG_MODE_AM, kHz(9)},
{RIG_MODE_FM, kHz(14)},
RIG_FLT_END,
},
.priv = (void *)& fdm_duo_priv_caps,
.rig_init = elad_init,
.rig_cleanup = elad_cleanup,
.set_freq = elad_set_freq,
.get_freq = elad_get_freq,
.set_rit = elad_set_rit, /* FIXME should this switch to rit mode or just set the frequency? */
.get_rit = elad_get_rit,
.set_xit = elad_set_xit, /* FIXME should this switch to xit mode or just set the frequency? */
.get_xit = elad_get_xit,
.set_mode = elad_set_mode,
.get_mode = elad_get_mode,
.set_vfo = elad_set_vfo,
.get_vfo = elad_get_vfo_if,
.set_split_vfo = elad_set_split_vfo,
.get_split_vfo = elad_get_split_vfo_if,
.get_ptt = elad_get_ptt,
.set_ptt = elad_set_ptt,
.get_dcd = elad_get_dcd,
.set_powerstat = elad_set_powerstat,
.get_powerstat = elad_get_powerstat,
.get_info = elad_fdm_duo_get_info,
.reset = elad_reset,
.set_ant = elad_set_ant,
.get_ant = elad_get_ant,
.scan = elad_scan, /* not working, invalid arguments using rigctl; elad_scan does only support on/off and not tone and CTCSS scan */
.has_set_level = FDM_DUO_LEVEL_ALL,
.has_get_level = FDM_DUO_LEVEL_ALL,
.set_level = elad_fdm_duo_set_level,
.get_level = elad_fdm_duo_get_level,
.has_get_func = FDM_DUO_FUNC_ALL,
.has_set_func = FDM_DUO_FUNC_ALL,
.set_func = elad_set_func,
.get_func = elad_get_func,
};
/*
* my notes:
* format with: indent --line-length 200 fdm_duo.c
*
* for the FDM_DUO the function NR and BC have tree state: NR0,1,2 and BC0,1,2
* this cannot be send through the on/off logic of set_function!
*/
/*
* Function definitions below
*/