Hamlib/rigs/prm80/prm8060.c

174 wiersze
5.1 KiB
C

/*
* Hamlib PRM80 backend - PRM8060 description
* Copyright (c) 2010,2021 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h>
#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "prm80.h"
#define PRM8060_ALL_MODES (RIG_MODE_FM)
#define PRM8060_FUNC (RIG_FUNC_REV|RIG_FUNC_LOCK|RIG_FUNC_MUTE)
#define PRM8060_LEVEL_ALL (RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_RFPOWER)
#define PRM8060_PARM_ALL (RIG_PARM_NONE)
// RIG_OP_FROM_VFO RIG_OP_MCL ??
#define PRM8060_VFO_OPS (RIG_OP_NONE)
#define PRM8060_VFO (RIG_VFO_MEM)
// Calibration done on PRM8070
#define PRM8060_STR_CAL { 15, \
{ \
{ 0x14, -54 }, /* S0 */ \
{ 0x1D, -48 }, /* S1 */ \
{ 0x26, -42 }, /* S2 */ \
{ 0x33, -36 }, /* S3 */ \
{ 0x3F, -30 }, /* S4 */ \
{ 0x4D, -24 }, /* S5 */ \
{ 0x55, -18 }, /* S6 */ \
{ 0x61, -12 }, /* S7 */ \
{ 0x68, -6 }, /* S8 */ \
{ 0x6C, 0 }, /* S9 */ \
{ 0x81, 10 }, /* +10 */ \
{ 0x8B, 20 }, /* +20 */ \
{ 0x8C, 40 }, /* +40 */ \
{ 0x8C, 50 }, /* +50 */ \
{ 0xFF, 60 } /* +60 */ \
} }
/*
* PRM 8060 rig capabilities.
* http://prm80.sourceforge.net/
* https://github.com/f4fez/prm80
*/
const struct rig_caps prm8060_caps =
{
RIG_MODEL(RIG_MODEL_PRM8060),
.model_name = "PRM8060",
.mfg_name = "Philips/Simoco",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 7,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_EVEN,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 0,
.has_get_func = PRM8060_FUNC,
.has_set_func = PRM8060_FUNC,
.has_get_level = PRM8060_LEVEL_ALL | RIG_LEVEL_RAWSTR,
.has_set_level = RIG_LEVEL_SET(PRM8060_LEVEL_ALL),
.has_get_parm = PRM8060_PARM_ALL,
.has_set_parm = RIG_PARM_SET(PRM8060_PARM_ALL),
.vfo_ops = PRM8060_VFO_OPS,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 99, RIG_MTYPE_MEM, PRM80_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(144), MHz(146) - kHz(12.5), PRM8060_ALL_MODES, -1, -1, PRM8060_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = {
{MHz(144), MHz(146) - kHz(12.5), PRM8060_ALL_MODES, W(5), W(25), PRM8060_VFO},
RIG_FRNG_END,
},
.rx_range_list2 = {
{MHz(144), MHz(148) - kHz(12.5), PRM8060_ALL_MODES, -1, -1, PRM8060_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
{MHz(144), MHz(148) - kHz(12.5), PRM8060_ALL_MODES, W(5), W(25), PRM8060_VFO},
RIG_FRNG_END,
},
.tuning_steps = {
{PRM8060_ALL_MODES, kHz(12.5)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{PRM8060_ALL_MODES, kHz(12.5)},
RIG_FLT_END,
},
.str_cal = PRM8060_STR_CAL,
.rig_init = prm80_init,
.rig_cleanup = prm80_cleanup,
.get_mode = prm80_get_mode,
.set_freq = prm80_set_freq,
.get_freq = prm80_get_freq,
.set_split_vfo = prm80_set_split_vfo,
.get_split_vfo = prm80_get_split_vfo,
.set_split_freq = prm80_set_split_freq,
.get_split_freq = prm80_get_split_freq,
.set_channel = prm80_set_channel,
.get_channel = prm80_get_channel,
.set_mem = prm80_set_mem,
.get_mem = prm80_get_mem,
.set_func = prm80_set_func,
.get_func = prm80_get_func,
.set_level = prm80_set_level,
.get_level = prm80_get_level,
.reset = prm80_reset,
.get_dcd = prm80_get_dcd,
.get_ptt = prm80_get_ptt,
.get_info = prm80_get_info,
};
/*
* Function definitions below
*/