Hamlib/rigs/prm80/prm80.c

1315 wiersze
30 KiB
C

/*
* Hamlib PRM80 backend - main file
* Copyright (c) 2010,2021 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <ctype.h>
#include <math.h>
#include "hamlib/rig.h"
#include "serial.h"
#include "cal.h"
#include "register.h"
#include "idx_builtin.h"
#include "prm80.h"
#define LF "\x0a"
#define BUFSZ 64
// Channel number min and max
#define CHAN_MIN 0
#define CHAN_MAX 99
// "E" system state is cached for this time (ms)
#define PRM80_CACHE_TIMEOUT 200
// Length (in bytes) of the response to the "E" command
#define CMD_E_RSP_LEN 22
#define RX_IF_OFFSET MHz(21.4)
// The rig's PLL only deals with freq in Hz divided by this value
#define FREQ_DIV 12500.
/* V5 based on V4 commands
* retrieved from https://github.com/f4fez/prm80
* and https://github.com/f4fez/prm80/blob/master/doc/Computer_commands_V4.md
* It used to be from https://sourceforge.net/projects/prm80/
* and https://sourceforge.net/p/prm80/wiki/Computer%20commands%20V4/
MessageVersion:
IF TARGET EQ 8060
DB "PRM8060 V4.0"
ELSEIF TARGET EQ 8070
DB "PRM8070 V4.0"
ENDIF
MessageAide: DB "H",0Dh,0Ah
DB " Commandes disponibles :",0Dh,0Ah
DB " [0] = Reset.",0Dh,0Ah
DB " [1] a [5] = Show 80c552 port state P1 to P5.",0Dh,0Ah
DB " [C] = Print channels list.",0Dh,0Ah
DB " [D] = Set system byte.",0Dh,0Ah
DB " [E] = Show system state (Mode-Chan-Chanstate-Sql-Vol-Lock-RX freq-TX freq,RSSI).",0Dh,0Ah
DB " [F] = Set squelch.",0Dh,0Ah
DB " [H] = Print this help page.",0Dh,0Ah
DB " [I] = Erase and init RAM and EEPROM.",0Dh,0Ah
DB " [K] = Set lock byte.",0Dh,0Ah
DB " [L] = Print latch state.",0Dh,0Ah
DB " [M] = Edit external RAM manualy.",0Dh,0Ah
DB " [N] = Set current channel.",0Dh,0Ah
DB " [O] = Set volume.",0Dh,0Ah
DB " [P] = Edit/Add channel.",0Dh,0Ah
DB " [Q] = Set channels number.",0Dh,0Ah
DB " [R] = Set synthetiser frequencies.",0Dh,0Ah
DB " [U] = Print 80c552 internal RAM.",0Dh,0Ah
DB " [S] = Copy EEPROM to external RAM.",0Dh,0Ah
DB " [T] = Set current channel state.",0Dh,0Ah
DB " [V] = Print firmware version.",0Dh,0Ah
DB " [X] = Copy external RAM to EEPROM.",0Dh,0Ah
DB " [Y] = Print first 2 kb from the EEPROM I2C 24c16.",0Dh,0Ah
DB " [Z] = Print external RAM ($0000 to $07FF).",0Dh,0Ah,0
*/
/*
[0] = Reset.
[C] = Print channels list.
[D] = Set system byte.
[E] = Show system state (Mode-Chan-Chanstate-Sql-Vol-Lock-RX freq-TX
freq-RSSI).
[F] = Set squelch.
[H] = Print this help page.
[K] = Set lock byte.
[N] = Set current channel.
[O] = Set volume.
[P] = Edit/Add channel.
[Q] = Set channels number.
[R] = Set synthetiser frequencies.
[T] = Set current channel state.
[V] = Print firmware version.
*/
/*
* Mode byte, which holds the state of system basic features:
b0: Squelch mode is displayed on LCD if true. Channel mode if false.
b1: Power level (High or Low mode)
b2: Squelch open (Read only)
b3: TX mode (Read only)
b4: PLL locked (Read only)
b5: Long key push (Internal)
b6: Key bounce (Internal)
b7: Force LCD refresh when set. Automaticaly cleared.
Channel state byte:
b0: Shift enable when true
b1: Reverse mode when true
b2: Positive shift when true. Negative if false
b3: Scanning locked out channel if set
b4-7: na.
Lock byte, which disables user controls when connected to a computer
b0: Keys disabled when true
b1: TX disabled when true
b2: Volume button disabled when true
b3: RX disabled when true
b4-b7: na.
* *********************************************************************
*/
static void prm80_force_cache_timeout(RIG *rig)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
rig_force_cache_timeout(&priv->status_tv);
}
/*
* Read a prompt terminated by delimiter, then write an optional string s.
*/
static int read_prompt_and_send(hamlib_port_t *rigport,
char *data, int *data_len, const char *s, const char *delimiter,
int space_after_delim)
{
char buf[BUFSZ];
char spacebuf[4];
int buflen, retval;
/* no data wanted? flush it anyway by reading it */
if (data == NULL)
{
data = buf;
}
buflen = (data_len == NULL) ? sizeof(buf) : *data_len;
retval = read_string(rigport, (unsigned char *) data, buflen, delimiter, 1, 0, 1);
if (retval < 0)
{
return retval;
}
// Place an end of string
data[(retval < buflen) ? retval : (buflen - 1)] = '\0';
if (data_len != NULL)
{
*data_len = retval;
}
// Read one (dummy) space character after the colon
if (space_after_delim)
{
retval = read_block(rigport, (unsigned char *) spacebuf, 1);
if (retval < 0 && retval != -RIG_ETIMEOUT)
{
return retval;
}
}
// Here is the answer to the prompt
retval = write_block(rigport, (unsigned char *) s, strlen(s));
return retval;
}
/*
* Read a prompt terminated by ": ", then write an optional string s.
*/
static int read_colon_prompt_and_send(hamlib_port_t *rigport,
char *data, int *data_len, const char *s)
{
return read_prompt_and_send(rigport, data, data_len, s, ":", 1);
}
/*
* Read a prompt terminated by "$" (without space afterwards),
* then write an optional string s.
*/
static int read_dollar_prompt_and_send(hamlib_port_t *rigport,
char *data, int *data_len, const char *s)
{
return read_prompt_and_send(rigport, data, data_len, s, "$", 0);
}
/*
* After each executed command, the rig generally sends "\r\n>"
*/
static int prm80_wait_for_prompt(hamlib_port_t *rigport)
{
char buf[BUFSZ * 2];
int retval;
// Read up to the '>' prompt and discard content.
retval = read_string(rigport, (unsigned char *) buf, sizeof(buf), ">", 1, 0, 1);
if (retval < 0)
{
return retval;
}
return RIG_OK;
}
/*
*
* \param cmd is string of generally one letter (or digit)
* \param arg1 is an optional string to send afterwards
* \param wait_prompt boolean when non-nul, will wait for "\r\n>" afterwards
*/
static int prm80_transaction(RIG *rig, const char *cmd,
const char *arg1, int wait_prompt)
{
int retval;
struct rig_state *rs = &rig->state;
// Get rid of possible prompt sent by the rig
rig_flush(&rs->rigport);
// Start with the command
retval = write_block(&rs->rigport, (unsigned char *) cmd, strlen(cmd));
if (retval != RIG_OK)
{
return retval;
}
if (arg1 != NULL)
{
retval = read_colon_prompt_and_send(&rs->rigport, NULL, NULL, arg1);
if (retval < 0)
{
return retval;
}
}
if (wait_prompt)
{
prm80_wait_for_prompt(&rs->rigport);
}
return RIG_OK;
}
int prm80_init(RIG *rig)
{
if (!rig)
{
return -RIG_EINVAL;
}
rig->state.priv = (void *)calloc(1, sizeof(struct prm80_priv_data));
if (!rig->state.priv)
{
/* whoops! memory shortage! */
return -RIG_ENOMEM;
}
return RIG_OK;
}
int prm80_cleanup(RIG *rig)
{
if (rig == NULL)
{
return -RIG_EINVAL;
}
free(rig->state.priv);
rig->state.priv = NULL;
return RIG_OK;
}
/*
* prm80_reset
* Assumes rig!=NULL
*/
int prm80_reset(RIG *rig, reset_t reset)
{
int retval;
/*
* Reset CPU
*/
retval = prm80_transaction(rig, "0", NULL, 1);
if (retval != RIG_OK)
{
return retval;
}
prm80_force_cache_timeout(rig);
return RIG_OK;
}
/*
* Convert freq in Hz to the RX PLL value representation with PRM08 firmware
*/
static unsigned rx_freq_to_pll_value(freq_t rx_freq)
{
// UHF vs VHF
if (rx_freq > MHz(300))
{
return (unsigned)((rx_freq - RX_IF_OFFSET) / FREQ_DIV);
}
else
{
return (unsigned)((rx_freq + RX_IF_OFFSET) / FREQ_DIV);
}
}
static freq_t pll_value_to_rx_freq(unsigned pll_value)
{
freq_t rx_freq;
rx_freq = (freq_t)pll_value * FREQ_DIV;
// UHF vs VHF
if (rx_freq > MHz(300))
{
rx_freq += RX_IF_OFFSET;
}
else
{
rx_freq -= RX_IF_OFFSET;
}
return rx_freq;
}
/*
* Set RX and TX freq
*
* See https://github.com/f4fez/prm80/blob/master/doc/Computer_control.md
* "Adding a new channel" regarding freq format.
*/
int prm80_set_rx_tx_freq(RIG *rig, freq_t rx_freq, freq_t tx_freq)
{
struct rig_state *rs = &rig->state;
char rx_freq_buf[BUFSZ];
char tx_freq_buf[BUFSZ];
int rc;
// for RX, compute the PLL word without the IF
sprintf(rx_freq_buf, "%04X",
rx_freq_to_pll_value(rx_freq));
sprintf(tx_freq_buf, "%04X",
(unsigned)(tx_freq / FREQ_DIV));
// The protocol is like this :
// "RX frequency : " XXXX
// CRLF"TX frequency : " XXXX
rc = prm80_transaction(rig, "R", rx_freq_buf, 0);
if (rc != RIG_OK)
{
return rc;
}
// There's a second line to process after prm80_transaction()
rc = read_colon_prompt_and_send(&rs->rigport, NULL, NULL, tx_freq_buf);
if (rc != RIG_OK)
{
return rc;
}
// quid timeout in trx waiting for freq ?
// NB: the [R] command does not update the checksum of the RAM!
prm80_wait_for_prompt(&rs->rigport);
return rc;
}
/*
* Set (RX) freq
*/
int prm80_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
freq_t tx_freq;
int rc;
if (priv->split == RIG_SPLIT_OFF)
{
tx_freq = freq;
}
else
{
tx_freq = (priv->tx_freq == 0.) ? freq : priv->tx_freq;
}
rc = prm80_set_rx_tx_freq(rig, freq, tx_freq);
if (rc == RIG_OK)
{
priv->rx_freq = freq;
}
prm80_force_cache_timeout(rig);
return rc;
}
/*
* Set TX freq depending on emulated split state
*/
int prm80_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
freq_t rx_freq;
int rc;
rx_freq = (priv->rx_freq == 0.) ? tx_freq : priv->rx_freq;
rc = prm80_set_rx_tx_freq(rig, rx_freq, tx_freq);
if (rc == RIG_OK)
{
priv->tx_freq = tx_freq;
}
prm80_force_cache_timeout(rig);
return rc;
}
/*
* Get RX freq depending on emulated split state
*/
int prm80_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
int ret;
channel_t chan;
memset(&chan, 0, sizeof(chan));
chan.vfo = RIG_VFO_CURR;
ret = prm80_get_channel(rig, vfo, &chan, 0);
if (ret != RIG_OK)
{
return ret;
}
*freq = chan.freq;
priv->tx_freq = chan.tx_freq;
return RIG_OK;
}
/*
* Enable/disable Split
*
* Rem: don't care about vfo
*/
int prm80_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
priv->split = split;
return RIG_OK;
}
/*
* Get Split
*/
int prm80_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
*split = priv->split;
*tx_vfo = RIG_VFO_CURR;
return RIG_OK;
}
/*
* Get TX freq
*/
int prm80_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
int ret;
channel_t chan;
memset(&chan, 0, sizeof(chan));
chan.vfo = RIG_VFO_CURR;
ret = prm80_get_channel(rig, vfo, &chan, 0);
if (ret != RIG_OK)
{
return ret;
}
*tx_freq = chan.tx_freq;
priv->rx_freq = chan.freq;
return RIG_OK;
}
/*
* Basic helper to ease some generic applications
*/
int prm80_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
// Can only do FM
*mode = RIG_MODE_FM;
*width = rig_passband_normal(rig, *mode);
return RIG_OK;
}
/*
* prm80_set_mem
* Assumes rig!=NULL
*/
int prm80_set_mem(RIG *rig, vfo_t vfo, int ch)
{
char chbuf[BUFSZ];
/* [N] = Set current channel. */
if (ch < CHAN_MIN || ch > CHAN_MAX)
{
return -RIG_EINVAL;
}
sprintf(chbuf, "%02u", (unsigned)ch);
prm80_force_cache_timeout(rig);
// Send command, no answer expected from rig except ">" prompt
return prm80_transaction(rig, "N", chbuf, 1);
}
/*
* prm80_get_mem
* Assumes rig!=NULL
*/
int prm80_get_mem(RIG *rig, vfo_t vfo, int *ch)
{
int ret;
channel_t chan;
memset(&chan, 0, sizeof(chan));
chan.vfo = RIG_VFO_CURR;
ret = prm80_get_channel(rig, vfo, &chan, 0);
if (ret != RIG_OK)
{
return ret;
}
*ch = chan.channel_num;
return RIG_OK;
}
/*
* Convert first two hexadecimal digit to integer
*/
static unsigned hhtoi(const char *p)
{
char buf[4];
// it has to be hex digits
if (!isxdigit(p[0]) || !isxdigit(p[1]))
{
rig_debug(RIG_DEBUG_ERR, "%s: unexpected content '%s'\n", __func__, p);
return 0;
}
buf[0] = p[0];
buf[1] = p[1];
buf[2] = '\0';
return (unsigned)strtol(buf, NULL, 16);
}
/**
* Get system state [E] from rig into \a statebuf
*/
static int prm80_do_read_system_state(hamlib_port_t *rigport, char *statebuf)
{
char *p;
int ret;
// Get rid of possible prompt sent by the rig
rig_flush(rigport);
/* [E] = Show system state */
ret = write_block(rigport, (unsigned char *) "E", 1);
if (ret < 0)
{
RETURNFUNC(ret);
}
// The response length is fixed
ret = read_block(rigport, (unsigned char *) statebuf, CMD_E_RSP_LEN);
if (ret < 0)
{
return ret;
}
if (ret >= 0)
{
statebuf[ret] = '\0';
}
if (ret < CMD_E_RSP_LEN)
{
rig_debug(RIG_DEBUG_ERR, "%s: len=%d < %d, statebuf='%s'\n", __func__,
ret, CMD_E_RSP_LEN, statebuf);
RETURNFUNC(-RIG_EPROTO);
}
p = strchr(statebuf, '>');
if (p)
{
int left_to_read = (p - statebuf) + 1;
memmove(statebuf, p + 1, CMD_E_RSP_LEN - left_to_read);
ret = read_block(rigport, (unsigned char *) statebuf + CMD_E_RSP_LEN - left_to_read,
left_to_read);
if (ret < 0)
{
return ret;
}
else
{
statebuf[CMD_E_RSP_LEN] = '\0';
}
rig_debug(RIG_DEBUG_WARN, "%s: len=%d, statebuf='%s'\n", __func__, ret,
statebuf);
}
prm80_wait_for_prompt(rigport);
return RIG_OK;
}
/*
* Layer to handle the cache to Get system state [E]
*/
static int prm80_read_system_state(RIG *rig, char *statebuf)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
int ret = RIG_OK;
if (rig_check_cache_timeout(&priv->status_tv, PRM80_CACHE_TIMEOUT))
{
ret = prm80_do_read_system_state(&rig->state.rigport, statebuf);
if (ret == RIG_OK)
{
strcpy(priv->cached_statebuf, statebuf);
/* update cache date */
gettimeofday(&priv->status_tv, NULL);
}
}
else
{
strcpy(statebuf, priv->cached_statebuf);
}
return ret;
}
/*
* prm80_get_channel
* Assumes rig!=NULL
*/
int prm80_get_channel(RIG *rig, vfo_t vfo, channel_t *chan, int read_only)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
char statebuf[BUFSZ];
int ret, chanstate, mode_byte, lock_byte;
if (chan->vfo == RIG_VFO_MEM)
{
ret = prm80_set_mem(rig, RIG_VFO_CURR, chan->channel_num);
if (ret != RIG_OK)
{
return ret;
}
}
ret = prm80_read_system_state(rig, statebuf);
if (ret != RIG_OK)
{
return ret;
}
/* (Mode-Chan-Chanstate-Sql-Vol-Lock-RX freq-TX freq-RSSI). */
/* Examples: 1240080AFF0033F02D40__ or 14000C00FD0079708020__ */
/* Current mode:
; b0: Squelch b1: power
; b2: Squelch open b3: TX
; b4: PLL locked b5: Long press memorize
; b6: Debouncing in effect b7: LCD refresh
*/
mode_byte = hhtoi(statebuf);
chan->mode = RIG_MODE_FM;
chan->width = rig_passband_normal(rig, chan->mode);
chan->channel_num = hhtoi(statebuf + 2);
chan->tx_mode = chan->mode;
chan->tx_width = chan->width;
/* Chan state:
; b0: shift enabled b1: reverse
; b2: shift + b3: lock out
*/
chanstate = hhtoi(statebuf + 4) & 0x0f;
/* is it rptr_shift or split mode ? */
chan->rptr_shift = (chanstate & 0x01) == 0 ? RIG_RPT_SHIFT_NONE :
(chanstate & 0x02) ? RIG_RPT_SHIFT_MINUS :
(chanstate & 0x04) ? RIG_RPT_SHIFT_PLUS : RIG_RPT_SHIFT_NONE;
chan->flags = (chanstate & 0x08) ? RIG_CHFLAG_SKIP : 0;
// squelch is in low nibble
chan->levels[LVL_SQL].f = ((float)(hhtoi(statebuf + 6) & 0x0F)) / 15.;
// volume is hex "00" .. "10"
chan->levels[LVL_AF].f = ((float)hhtoi(statebuf + 8)) / 16.;
chan->levels[LVL_RFPOWER].f = (mode_byte & 0x02) ? 1.0 : 0.0;
// new in FW V5
chan->levels[LVL_RAWSTR].i = hhtoi(statebuf + 20);
chan->funcs = 0;
chan->funcs |= (chanstate & 0x02) ? RIG_FUNC_REV : 0;
lock_byte = hhtoi(statebuf + 10) & 0x0f;
chan->funcs |= (lock_byte & 0x05) ? RIG_FUNC_LOCK : 0;
chan->funcs |= (lock_byte & 0x08) ? RIG_FUNC_MUTE : 0;
chan->freq = pll_value_to_rx_freq((hhtoi(statebuf + 12) << 8) + hhtoi(
statebuf + 14));
chan->tx_freq = ((hhtoi(statebuf + 16) << 8) + hhtoi(statebuf + 18)) * FREQ_DIV;
if (chan->rptr_shift != RIG_RPT_SHIFT_NONE)
{
chan->rptr_offs = chan->tx_freq - chan->freq;
chan->split = RIG_SPLIT_OFF;
}
else
{
chan->rptr_offs = 0;
chan->split = priv->split; // RIG_SPLIT_ON; ?
}
if (!read_only)
{
// Set rig to channel values
rig_debug(RIG_DEBUG_WARN,
"%s: please contact hamlib mailing list to implement this\n", __func__);
rig_debug(RIG_DEBUG_WARN,
"%s: need to know if rig updates when channel read or not\n", __func__);
//return -RIG_ENIMPL;
}
return RIG_OK;
}
/*
* prm80_set_channel handles RIG_VFO_MEM and RIG_VFO_CURR
*/
int prm80_set_channel(RIG *rig, vfo_t vfo, const channel_t *chan)
{
struct prm80_priv_data *priv = (struct prm80_priv_data *)rig->state.priv;
struct rig_state *rs = &rig->state;
char buf[BUFSZ];
int ret, chanstate;
freq_t tx_freq;
if (chan->vfo == RIG_VFO_MEM)
{
// setting channel without calling set_mem()
if (chan->channel_num < CHAN_MIN || chan->channel_num > CHAN_MAX)
{
return -RIG_EINVAL;
}
/* [P] = Edit/Add channel */
/* Example
Channel to set : 00
PLL value to load : $8020
Channel state : $00
Possibly:
"This channel number doesn't exist. Add new channel (Y/N) ? "
*/
sprintf(buf, "%02u", (unsigned)chan->channel_num);
ret = prm80_transaction(rig, "P", buf, 0);
if (ret != RIG_OK)
{
return ret;
}
// Set the RX frequency as PLL word.
sprintf(buf, "%04X", rx_freq_to_pll_value(chan->freq));
// "PLL value to load : $"
ret = read_dollar_prompt_and_send(&rs->rigport, NULL, NULL, buf);
if (ret != RIG_OK)
{
return ret;
}
// the channel status byte.
switch (chan->rptr_shift)
{
case RIG_RPT_SHIFT_NONE : chanstate = 0x00; break;
case RIG_RPT_SHIFT_MINUS : chanstate = 0x03; break;
case RIG_RPT_SHIFT_PLUS : chanstate = 0x05; break;
default: chanstate = 0x00; break;
}
chanstate |= (chan->flags & RIG_CHFLAG_SKIP) ? 0x08 : 0;
sprintf(buf, "%02X", chanstate);
// "Channel state : $"
ret = read_dollar_prompt_and_send(&rs->rigport, NULL, NULL, buf);
if (ret != RIG_OK)
{
return ret;
}
// Determine if prompt came back (CRLF'>') or have to
// handle the possible query from the rig:
// "This channel number doesn't exist. Add new channel (Y/N) ? "
ret = read_block(&rs->rigport, (unsigned char *) buf, 3);
if (ret < 0)
{
RETURNFUNC(ret);
}
if (ret == 3 && buf[2] == 'T')
{
// Read the question
ret = read_string(&rs->rigport, (unsigned char *) buf, sizeof(buf), "?", 1, 0, 1);
if (ret < 0)
{
RETURNFUNC(ret);
}
// Read extra space
ret = read_block(&rs->rigport, (unsigned char *) buf, 1);
if (ret < 0)
{
RETURNFUNC(ret);
}
// Send confirmation
ret = write_block(&rs->rigport, (unsigned char *) "Y", 1);
if (ret < 0)
{
RETURNFUNC(ret);
}
}
prm80_wait_for_prompt(&rs->rigport);
}
else
{
// assume here chan->vfo == RIG_VFO_CURR
// that is the "RAM" VFO not backed by memory
tx_freq = (chan->split == RIG_SPLIT_ON) ? chan->tx_freq : chan->freq;
ret = prm80_set_rx_tx_freq(rig, chan->freq, tx_freq);
if (ret != RIG_OK)
{
return ret;
}
priv->split = chan->split;
priv->rx_freq = chan->freq;
priv->tx_freq = tx_freq;
ret = prm80_set_level(rig, vfo, RIG_LEVEL_SQL, chan->levels[LVL_SQL]);
if (ret != RIG_OK)
{
return ret;
}
ret = prm80_set_level(rig, vfo, RIG_LEVEL_AF, chan->levels[LVL_AF]);
if (ret != RIG_OK)
{
return ret;
}
#if 0
// Not implemented yet..
ret = prm80_set_level(rig, vfo, RIG_LEVEL_RFPOWER, chan->levels[LVL_RFPOWER]);
if (ret != RIG_OK)
{
return ret;
}
#endif
ret = prm80_set_func(rig, vfo, RIG_FUNC_LOCK,
!!(chan->funcs & RIG_FUNC_LOCK));
if (ret != RIG_OK)
{
return ret;
}
}
prm80_force_cache_timeout(rig);
return RIG_OK;
}
// TODO FUNC_REV through Channel state byte ?
// TODO "Read-Modify-Write" (or shadowing in priv area) of the lock bits
int prm80_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
int ret;
if (func & RIG_FUNC_LOCK)
{
/* Lock keys(b0)/Vol(b2) */
ret = prm80_transaction(rig, "K", (status != 0) ? "05" : "00", 1);
}
else if (func & RIG_FUNC_MUTE)
{
/* Lock RX(b3) */
ret = prm80_transaction(rig, "K", (status != 0) ? "08" : "00", 1);
}
else
{
ret = -RIG_EINVAL;
}
prm80_force_cache_timeout(rig);
return ret;
}
int prm80_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
{
int ret;
channel_t chan;
memset(&chan, 0, sizeof(chan));
chan.vfo = RIG_VFO_CURR;
ret = prm80_get_channel(rig, vfo, &chan, 0);
if (ret != RIG_OK)
{
return ret;
}
*status = !!(chan.funcs & func);
return RIG_OK;
}
/*
* prm80_set_level
* Assumes rig!=NULL
*/
int prm80_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
char buf[BUFSZ];
int ret, mode_byte;
// do some clamping, all levels are float values.
if (val.f < 0.0)
{
val.f = 0.0;
}
else if (val.f > 1.0)
{
val.f = 1.0;
}
switch (level)
{
case RIG_LEVEL_AF:
// Unlike system state, volume decimal
sprintf(buf, "%02u", (unsigned)(val.f * 16));
return prm80_transaction(rig, "O", buf, 1);
case RIG_LEVEL_SQL:
sprintf(buf, "%02u", (unsigned)(val.f * 15));
return prm80_transaction(rig, "F", buf, 1);
case RIG_LEVEL_RFPOWER:
/* Current mode:
; b0: Squelch b1: power
; b2: Squelch open b3: TX
; b4: PLL locked b5: Long press memorize
; b6: Debouncing in effect b7: LCD refresh
*/
// Perform a "Read-Modify-Write" of the mode_byte
ret = prm80_read_system_state(rig, buf);
if (ret != RIG_OK)
{
return ret;
}
mode_byte = hhtoi(buf);
mode_byte &= ~0x02;
mode_byte |= (val.f == 0.) ? 0 : 0x02;
sprintf(buf, "%02X", (unsigned)mode_byte);
return prm80_transaction(rig, "D", buf, 1);
default:
rig_debug(RIG_DEBUG_ERR, "%s: unsupported set_level %s\n", __func__,
rig_strlevel(level));
return -RIG_EINVAL;
}
prm80_force_cache_timeout(rig);
return RIG_OK;
}
#ifdef V4_ONLY
/*
* get_level RIG_LEVEL_RAWSTR
*/
static int prm80_get_rawstr_RAM(RIG *rig, value_t *val)
{
char buf[BUFSZ];
struct rig_state *rs = &rig->state;
int ret, i;
/* [U] = Print 80c552 internal RAM. */
// Send cmd, Wait for colon prompt, but then send nothing
ret = prm80_transaction(rig, "U", "", 0);
if (ret < 0)
{
return ret;
}
// Read CRLF
ret = read_string(&rs->rigport, buf, BUFSZ, "\n", 1, 0, 1);
if (ret < 0)
{
return ret;
}
// (16 lines of 16 bytes each)
// According to prm.a51, the rssi_hold variable is in RAM at RAM+35.
// The RAM base is at 030h.
#define RSSI_HOLD_ADDR (0x30 + 35) // = 0x53
for (i = 0; i < (RSSI_HOLD_ADDR / 16) + 1; i++)
{
ret = read_string(&rs->rigport, buf, BUFSZ, "\n", 1, 0, 1);
if (ret < 0)
{
return ret;
}
}
// A line looks like this
// "$50 : 00 01 02 53 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\r\n"
val->i = hhtoi(buf + 6 + 3 * (RSSI_HOLD_ADDR % 16));
// discard the remaining content of RAM print
for (i = 0; i < (16 - RSSI_HOLD_ADDR / 16) - 1; i++)
{
read_string(&rs->rigport, buf, BUFSZ, "\n", 1, 0, 1);
}
prm80_wait_for_prompt(&rs->rigport);
return RIG_OK;
}
#endif
/*
* prm80_get_level
* Assumes rig!=NULL
*/
int prm80_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
int ret;
channel_t chan;
memset(&chan, 0, sizeof(chan));
chan.vfo = RIG_VFO_CURR;
ret = prm80_get_channel(rig, vfo, &chan, 0);
if (ret != RIG_OK)
{
return ret;
}
switch (level)
{
case RIG_LEVEL_RAWSTR:
val->i = chan.levels[LVL_RAWSTR].i;
break;
case RIG_LEVEL_AF:
val->f = chan.levels[LVL_AF].f;
break;
case RIG_LEVEL_SQL:
val->f = chan.levels[LVL_SQL].f;
break;
case RIG_LEVEL_RFPOWER:
val->f = chan.levels[LVL_RFPOWER].f;
break;
default:
rig_debug(RIG_DEBUG_ERR, "%s: unsupported set_level %s\n", __func__,
rig_strlevel(level));
return -RIG_EINVAL;
}
return RIG_OK;
}
int prm80_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
{
char statebuf[BUFSZ];
int ret, mode_byte;
ret = prm80_read_system_state(rig, statebuf);
if (ret != RIG_OK)
{
return ret;
}
mode_byte = hhtoi(statebuf);
// TX mode on?
*ptt = (mode_byte & 0x08) ? RIG_PTT_ON : RIG_PTT_OFF;
return RIG_OK;
}
int prm80_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd)
{
char statebuf[BUFSZ];
int ret, mode_byte;
ret = prm80_read_system_state(rig, statebuf);
if (ret != RIG_OK)
{
return ret;
}
mode_byte = hhtoi(statebuf);
// Squelch open?
*dcd = (mode_byte & 0x04) ? RIG_DCD_ON : RIG_DCD_OFF;
return RIG_OK;
}
// TODO vfo_op : MCL FROM_VFO ..
/*
* prm80_get_info
* Assumes rig!=NULL
*/
const char *prm80_get_info(RIG *rig)
{
static char s_buf[BUFSZ];
struct rig_state *rs = &rig->state;
char *p;
int ret;
// Get rid of possible prompt sent by the rig
rig_flush(&rs->rigport);
/* [V] = Print firmware version. */
ret = write_block(&rs->rigport, (unsigned char *) "V", 1);
if (ret < 0)
{
return NULL;
}
ret = read_string(&rs->rigport, (unsigned char *) s_buf, BUFSZ, ">", 1, 0, 1);
if (ret < 0)
{
return NULL;
}
p = strchr(s_buf, '\r');
if (p)
{
// chomp
*p = '\0';
}
return s_buf;
}
/*
* initrigs_prm80 is called by rig_backend_load
*/
DECLARE_INITRIG_BACKEND(prm80)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s: _init called\n", __func__);
rig_register(&prm8060_caps);
return RIG_OK;
}