Hamlib/rigs/kenwood/ts950.c

344 wiersze
12 KiB
C

/*
* Hamlib Kenwood backend - TS950 description
* Copyright (c) 2002-2012 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
/*
* Edited by Martin Ewing AA6E, March, 2012
* The '950 has a relatively small command set.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "kenwood.h"
#define TS950_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS950_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS950_AM_TX_MODES RIG_MODE_AM
#define TS950_VFO (RIG_VFO_A|RIG_VFO_B)
#define TS950_GET_LEVEL (RIG_LEVEL_RAWSTR)
#define cmd_trm(rig) ((struct kenwood_priv_caps *)(rig)->caps->priv)->cmdtrm
static struct kenwood_priv_caps ts950_priv_caps =
{
.cmdtrm = EOM_KEN,
};
/*
* This backend should work with all models in the TS-950 series (TS-950S, SDX, etc.)
* There are minor differences between the SDX and other models, but they are
* in commands not implemented here.
*
* Reference: TS-950 series External Control Instruction Manual (1992)
*/
const struct rig_caps ts950s_caps =
{
RIG_MODEL(RIG_MODEL_TS950S),
.model_name = "TS-950S",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 50,
.timeout = 600, // this rig takes over 250ms to respond an IF command
.retry = 10,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = TS950_GET_LEVEL,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = kenwood38_ctcss_list,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
/* atten settings are not available in CAT interface */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 89, RIG_MTYPE_MEM }, /* TBC */
{ 90, 99, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100), MHz(30), TS950_ALL_MODES, -1, -1, TS950_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
{kHz(1800), MHz(2) - 1, TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO}, /* 100W class */
{kHz(1800), MHz(2) - 1, TS950_AM_TX_MODES, 2000, W(40), TS950_VFO}, /* 25W class */
{kHz(3500), MHz(4) - 1, TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(3500), MHz(4) - 1, TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(7), kHz(7300), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(7), kHz(7300), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{kHz(10100), kHz(10150), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(10100), kHz(10150), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(14), kHz(14350), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(14), kHz(14350), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{kHz(18068), kHz(18168), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(18068), kHz(18168), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(21), kHz(21450), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(21), kHz(21450), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{kHz(24890), kHz(24990), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(24890), kHz(24990), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(28), kHz(29700), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(28), kHz(29700), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = {
{TS950_ALL_MODES, 50},
{TS950_ALL_MODES, 100},
{TS950_ALL_MODES, kHz(1)},
{TS950_ALL_MODES, kHz(5)},
{TS950_ALL_MODES, kHz(9)},
{TS950_ALL_MODES, kHz(10)},
{TS950_ALL_MODES, 12500},
{TS950_ALL_MODES, kHz(20)},
{TS950_ALL_MODES, kHz(25)},
{TS950_ALL_MODES, kHz(100)},
{TS950_ALL_MODES, MHz(1)},
{TS950_ALL_MODES, 0}, /* any tuning step */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_CW, Hz(200)},
{RIG_MODE_RTTY, Hz(500)},
{RIG_MODE_AM, kHz(9)},
{RIG_MODE_FM, kHz(14)},
RIG_FLT_END,
},
.priv = (void *)& ts950_priv_caps,
.rig_init = kenwood_init,
.rig_open = kenwood_open,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode_if,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_ctcss_tone = kenwood_set_ctcss_tone,
.get_ctcss_tone = kenwood_get_ctcss_tone,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
/* Things that the '950 doesn't do ...
* .set_func = kenwood_set_func,
* .get_func = kenwood_get_func,
* .set_level = kenwood_set_level,
*/
.get_level = kenwood_get_level,
/*
* .send_morse = kenwood_send_morse,
*/
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.reset = kenwood_reset,
};
const struct rig_caps ts950sdx_caps =
{
RIG_MODEL(RIG_MODEL_TS950SDX),
.model_name = "TS-950SDX",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 50,
.timeout = 600, // this rig takes over 250ms to respond an IF command
.retry = 10,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = TS950_GET_LEVEL,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = kenwood38_ctcss_list,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
/* atten settings are not available in CAT interface */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 89, RIG_MTYPE_MEM }, /* TBC */
{ 90, 99, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100), MHz(30), TS950_ALL_MODES, -1, -1, TS950_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
{kHz(1800), MHz(2) - 1, TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO}, /* 100W class */
{kHz(1800), MHz(2) - 1, TS950_AM_TX_MODES, 2000, W(40), TS950_VFO}, /* 25W class */
{kHz(3500), MHz(4) - 1, TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(3500), MHz(4) - 1, TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(7), kHz(7300), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(7), kHz(7300), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{kHz(10100), kHz(10150), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(10100), kHz(10150), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(14), kHz(14350), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(14), kHz(14350), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{kHz(18068), kHz(18168), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(18068), kHz(18168), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(21), kHz(21450), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(21), kHz(21450), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{kHz(24890), kHz(24990), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{kHz(24890), kHz(24990), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
{MHz(28), kHz(29700), TS950_OTHER_TX_MODES, 5000, W(150), TS950_VFO},
{MHz(28), kHz(29700), TS950_AM_TX_MODES, 2000, W(40), TS950_VFO},
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = {
{TS950_ALL_MODES, 50},
{TS950_ALL_MODES, 100},
{TS950_ALL_MODES, kHz(1)},
{TS950_ALL_MODES, kHz(5)},
{TS950_ALL_MODES, kHz(9)},
{TS950_ALL_MODES, kHz(10)},
{TS950_ALL_MODES, 12500},
{TS950_ALL_MODES, kHz(20)},
{TS950_ALL_MODES, kHz(25)},
{TS950_ALL_MODES, kHz(100)},
{TS950_ALL_MODES, MHz(1)},
{TS950_ALL_MODES, 0}, /* any tuning step */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_CW, Hz(200)},
{RIG_MODE_RTTY, Hz(500)},
{RIG_MODE_AM, kHz(9)},
{RIG_MODE_FM, kHz(14)},
RIG_FLT_END,
},
.priv = (void *)& ts950_priv_caps,
.rig_init = kenwood_init,
.rig_open = kenwood_open,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode_if,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_ctcss_tone = kenwood_set_ctcss_tone,
.get_ctcss_tone = kenwood_get_ctcss_tone,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
/* Things that the '950 doesn't do ...
* .set_func = kenwood_set_func,
* .get_func = kenwood_get_func,
* .set_level = kenwood_set_level,
*/
.get_level = kenwood_get_level,
/*
* .send_morse = kenwood_send_morse,
*/
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.reset = kenwood_reset,
};