Hamlib/rigs/kenwood/trc80.c

187 wiersze
5.4 KiB
C

/*
* Hamlib Kenwood backend - TRC-80 description
* Copyright (c) 2000-2009 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "bandplan.h"
#include "kenwood.h"
#define TRC80_ALL_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_AM|RIG_MODE_RTTY)
#define TRC80_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define TRC80_AM_TX_MODES RIG_MODE_AM
/* TODO: make sure they are implemented by kenwood generic backend, and compatible */
#define TRC80_FUNC_ALL (RIG_FUNC_TUNER|RIG_FUNC_AIP|\
RIG_FUNC_TONE|RIG_FUNC_AIP|RIG_FUNC_NB|RIG_FUNC_VOX)
#define TRC80_LEVEL_ALL (RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_MICGAIN|\
RIG_LEVEL_RFPOWER|RIG_LEVEL_CWPITCH|RIG_LEVEL_BKIN_DLYMS|\
RIG_LEVEL_SQL|RIG_LEVEL_VOXDELAY)
#define TRC80_PARMS (RIG_PARM_NONE)
#define TRC80_VFO_OPS (RIG_OP_NONE)
#define TRC80_SCAN_OPS (RIG_SCAN_VFO)
#define TRC80_VFO (RIG_VFO_MEM)
#define TRC80_ANTS (0)
#define TRC80_CHANNEL_CAPS { \
.freq=1,\
.mode=1,\
.tx_freq=1,\
.tx_mode=1,\
.split=1,\
.flags=RIG_CHFLAG_SKIP \
}
static struct kenwood_priv_caps trc80_priv_caps =
{
.cmdtrm = EOM_KEN,
};
/*
* TRC-80/TK-80 rig capabilities.
*/
const struct rig_caps trc80_caps =
{
RIG_MODEL(RIG_MODEL_TRC80),
.model_name = "TRC-80",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 100,
.timeout = 1000,
.retry = 3,
.has_get_func = TRC80_FUNC_ALL,
.has_set_func = TRC80_FUNC_ALL,
.has_get_level = TRC80_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(TRC80_LEVEL_ALL),
.has_get_parm = TRC80_PARMS,
.has_set_parm = RIG_LEVEL_SET(TRC80_PARMS), /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = kHz(1.1),
.max_xit = 0,
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.vfo_ops = TRC80_VFO_OPS,
.scan_ops = TRC80_SCAN_OPS,
.chan_list = {
{ 1, 80, RIG_MTYPE_MEM, TRC80_CHANNEL_CAPS },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(500), MHz(30), TRC80_ALL_MODES, -1, -1, TRC80_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
{MHz(1.8), MHz(30), TRC80_OTHER_TX_MODES, W(15), W(100), TRC80_VFO, TRC80_ANTS},
{MHz(1.8), MHz(30), TRC80_AM_TX_MODES, W(5), W(25), TRC80_VFO, TRC80_ANTS}, /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(500), MHz(30), TRC80_ALL_MODES, -1, -1, TRC80_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
{MHz(1.8), MHz(30), TRC80_OTHER_TX_MODES, W(15), W(100), TRC80_VFO, TRC80_ANTS},
{MHz(1.8), MHz(30), TRC80_AM_TX_MODES, W(5), W(25), TRC80_VFO, TRC80_ANTS}, /* AM class */
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = { /* FIXME: TBC */
{TRC80_ALL_MODES, 1},
{TRC80_ALL_MODES, 10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY, kHz(2.2)},
{RIG_MODE_AM, kHz(5)},
RIG_FLT_END,
},
.priv = (void *)& trc80_priv_caps,
.rig_init = kenwood_init,
.rig_open = kenwood_open,
.rig_close = kenwood_close,
.rig_cleanup = kenwood_cleanup,
#ifdef XXREMOVEDXX
.set_freq = kenwood_set_freq,
#endif
.get_freq = kenwood_get_freq_if,
.get_split_vfo = kenwood_get_split_vfo_if,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.set_level = kenwood_set_level,
.get_level = kenwood_get_level,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem,
.get_channel = kenwood_get_channel,
.scan = kenwood_scan,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.get_info = kenwood_get_info,
};
/*
* Function definitions below
*/