Hamlib/rigs/kenwood/ts930.c

182 wiersze
5.6 KiB
C

/*
* Hamlib Kenwood backend - TS930 description
* Copyright (c) 2000-2003 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include <bandplan.h>
#include "kenwood.h"
#define TS930_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define TS930_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define TS930_AM_TX_MODES RIG_MODE_AM
/* FIXME: TBC */
#define TS930_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_NR|RIG_FUNC_ANF|RIG_FUNC_LOCK)
#define TS930_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_SQL|RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_AGC)
#define TS930_VFO (RIG_VFO_A|RIG_VFO_B)
#define TS930_ANTS (0)
static struct kenwood_priv_caps ts930_priv_caps =
{
.cmdtrm = EOM_KEN,
};
/*
* ts930 rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*
* part of infos comes from .http = //www.kenwood.net/
*/
const struct rig_caps ts930_caps =
{
RIG_MODEL(RIG_MODEL_TS930),
.model_name = "TS-930",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 57600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 10,
.has_get_func = TS930_FUNC_ALL,
.has_set_func = TS930_FUNC_ALL,
.has_get_level = TS930_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(TS930_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.preamp = { RIG_DBLST_END, }, /* FIXME: preamp list */
.attenuator = { 6, 12, 18, RIG_DBLST_END, }, /* TBC */
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 89, RIG_MTYPE_MEM }, /* TBC */
{ 90, 99, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(150), MHz(30), TS930_ALL_MODES, -1, -1, TS930_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
FRQ_RNG_HF(1, TS930_OTHER_TX_MODES, W(5), W(250), TS930_VFO, TS930_ANTS),
FRQ_RNG_HF(1, TS930_AM_TX_MODES, W(4), W(80), TS930_VFO, TS930_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(150), MHz(30), TS930_ALL_MODES, -1, -1, TS930_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
FRQ_RNG_HF(1, TS930_OTHER_TX_MODES, W(5), W(250), TS930_VFO, TS930_ANTS),
FRQ_RNG_HF(1, TS930_AM_TX_MODES, W(4), W(80), TS930_VFO, TS930_ANTS), /* AM class */
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = { /* FIXME: TBC */
{TS930_ALL_MODES, 50},
{TS930_ALL_MODES, 100},
{TS930_ALL_MODES, kHz(1)},
{TS930_ALL_MODES, kHz(5)},
{TS930_ALL_MODES, kHz(9)},
{TS930_ALL_MODES, kHz(10)},
{TS930_ALL_MODES, 12500},
{TS930_ALL_MODES, kHz(20)},
{TS930_ALL_MODES, kHz(25)},
{TS930_ALL_MODES, kHz(100)},
{TS930_ALL_MODES, MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_AM, kHz(2.7)},
RIG_FLT_END,
},
.priv = (void *)& ts930_priv_caps,
.rig_init = kenwood_init,
.rig_open = kenwood_open, // we don't know the ID for this rig
.rig_close = kenwood_close,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.set_level = kenwood_set_level,
.get_level = kenwood_get_level,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.reset = kenwood_reset,
};
/*
* Function definitions below
*/