Hamlib/rigs/rs/xk2100.c

193 wiersze
5.1 KiB
C

/*
* Hamlib R&S backend - XK2100 description
* Copyright (c) 2009-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "gp2000.h"
#define XK2100_MODES (RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_PKTUSB|RIG_MODE_PKTLSB|RIG_MODE_CW|RIG_MODE_AM|RIG_MODE_FM)
#define XK2100_FUNC (RIG_FUNC_SQL)
/* #define XK2100_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_SQL|RIG_LEVEL_AGC| \
* RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)
*/
#define XK2100_LEVEL_ALL (RIG_LEVEL_SQL|\
RIG_LEVEL_AF)
#define XK2100_PARM_ALL (RIG_PARM_NONE)
#define XK2100_VFO (RIG_VFO_A)
#define XK2100_VFO_OPS (RIG_OP_NONE)
#define XK2100_ANTS (RIG_ANT_1)
#define XK2100_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.ant = 1, \
.funcs = XK2100_FUNC, \
.levels = RIG_LEVEL_SET(XK2100_LEVEL_ALL), \
.channel_desc=1, \
.flags = RIG_CHFLAG_SKIP, \
}
/*
* XK2100 rig capabilities.
*
* Had to use NONE for flow control and set RTS high
* We are not using address mode since we're on RS232 for now
* If using RS485 should add address capability
*
* TODO
* - set/get_channels
*/
const struct rig_caps xk2100_caps =
{
RIG_MODEL(RIG_MODEL_XK2100),
.model_name = "XK2100",
.mfg_name = "Rohde&Schwarz",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
// Need to set RTS on for some reason
// And HANDSHAKE_NONE even though HARDWARE is what is called for
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 38400, /* 7E1, RTS/CTS */
.serial_data_bits = 7,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_EVEN,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = XK2100_FUNC,
.has_set_func = XK2100_FUNC,
.has_get_level = XK2100_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(XK2100_LEVEL_ALL),
.has_get_parm = XK2100_PARM_ALL,
.has_set_parm = RIG_PARM_SET(XK2100_PARM_ALL),
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = {RIG_DBLST_END},
.attenuator = {32, RIG_DBLST_END},
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 7, /* FIXME */
.vfo_ops = XK2100_VFO_OPS,
.chan_list = {
{0, 99, RIG_MTYPE_MEM, XK2100_MEM_CAP},
RIG_CHAN_END,
},
.rx_range_list1 = {
{
kHz(1500), MHz(30), XK2100_MODES, -1, -1, XK2100_VFO,
XK2100_ANTS
},
RIG_FRNG_END,
},
.tx_range_list1 = {RIG_FRNG_END,},
.rx_range_list2 = {
{
kHz(1500), MHz(30), XK2100_MODES, -1, -1, XK2100_VFO,
XK2100_ANTS
},
RIG_FRNG_END,
},
.tx_range_list2 = {RIG_FRNG_END,},
/*
.tuning_steps = {
{XK2100_MODES,1},
{XK2100_MODES,10},
{XK2100_MODES,100},
{XK2100_MODES,1000},
RIG_TS_END,
},
*/
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_WFM, kHz(150)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(15)},
{XK2100_MODES, kHz(2.4)},
{XK2100_MODES, kHz(1.5)},
{XK2100_MODES, Hz(150)},
{XK2100_MODES, Hz(300)},
{XK2100_MODES, Hz(600)},
{XK2100_MODES, kHz(6)},
{XK2100_MODES, kHz(9)},
{XK2100_MODES, kHz(15)},
{XK2100_MODES, kHz(30)},
{XK2100_MODES, kHz(50)},
{XK2100_MODES, kHz(120)},
RIG_FLT_END,
},
.priv = NULL,
.set_ptt = gp2000_set_ptt,
.get_ptt = gp2000_get_ptt,
.set_freq = gp2000_set_freq,
.get_freq = gp2000_get_freq,
.set_mode = gp2000_set_mode,
.get_mode = gp2000_get_mode,
.set_level = gp2000_set_level,
.get_level = gp2000_get_level,
//.set_func = gp2000_set_func,
//.get_func = gp2000_get_func,
.get_info = gp2000_get_info,
#if 0
/* TODO */
.rig_open = gp2000_rig_open,
.set_channel = gp2000_set_channel,
.get_channel = gp2000_get_channel,
#endif
};
/*
* Function definitions below
*/