Hamlib/rigs/icom/icr72.c

163 wiersze
4.7 KiB
C

/*
* Hamlib CI-V backend - description of IC-R72
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
#define ICR72_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define ICR72_FUNC_ALL (RIG_FUNC_NONE)
#define ICR72_LEVEL_ALL (RIG_LEVEL_NONE)
#define ICR72_VFO_OPS (RIG_OP_TO_VFO|RIG_OP_FROM_VFO|RIG_OP_MCL)
#define ICR72_VFO_ALL (RIG_VFO_A|RIG_VFO_MEM)
#define ICR71_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ICR72_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO)
static struct icom_priv_caps icr72_priv_caps =
{
0x32, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic737_ts_sc_list
};
const struct rig_caps icr72_caps =
{
RIG_MODEL(RIG_MODEL_ICR72),
.model_name = "IC-R72",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = ICR72_FUNC_ALL,
.has_set_func = ICR72_FUNC_ALL,
.has_get_level = ICR72_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ICR72_LEVEL_ALL),
.has_get_parm = RIG_PARM_ANN,
.has_set_parm = RIG_PARM_ANN,
.level_gran = {}, /* granularity */
.parm_gran = {
[PARM_BANDSELECT] = {.step = {.s = "BANDUNUSED,BAND160M,BAND80M,BAND40M,BAND30M,BAND20M,BAND17M,BAND15M,BAND12M,BAND10M,BAND6M,BANDGEN"}},
[PARM_ANN] = {.min = {.i = 0}, .max = {.i = 2}, .step = {.i = 1}},
},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR72_VFO_OPS,
.scan_ops = ICR72_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100), MHz(30), ICR72_MODES, -1, -1, ICR72_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100), MHz(30), ICR72_MODES, -1, -1, ICR72_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{ICR72_MODES, Hz(10)},
{ICR72_MODES, kHz(1)},
{ICR72_MODES, kHz(2)},
{ICR72_MODES, kHz(3)},
{ICR72_MODES, kHz(4)},
{ICR72_MODES, kHz(5)},
{ICR72_MODES, kHz(6)},
{ICR72_MODES, kHz(7)},
{ICR72_MODES, kHz(8)},
{ICR72_MODES, kHz(9)},
{ICR72_MODES, kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY, kHz(2.3)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(15)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& icr72_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.get_level = icom_get_level,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.scan = icom_scan,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};