Hamlib/skanti/skanti.c

/*
 *  Hamlib Skanti backend - main file
 *  Copyright (c) 2004 by Stephane Fillod
 *
 *	$Id: skanti.c,v 1.1 2004-08-18 18:51:24 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdio.h>
#include <stdlib.h>
#include <string.h>  /* String function definitions */
#include <unistd.h>  /* UNIX standard function definitions */
#include <math.h>

#include <hamlib/rig.h>
#include <serial.h>
#include <misc.h>
#include <cal.h>
#include <register.h>

#include "skanti.h"


/* Line Feed */
#define EOM "\x0d"
#define LF "\x0a"
#define PROMPT ">"

#define BUFSZ 32

/*
 * modes
 */
#define MD_LSB	"L"
#define MD_USB	"J"
#define MD_CW	"A1"
#define MD_MCW	"A2"
#define MD_AM	"H"
#define MD_RTTY "F"
#define MD_R3E	"R"


/*
 * skanti_transaction
 * We assume that rig!=NULL, rig->state!= NULL, data!=NULL, data_len!=NULL
 * Otherwise, you'll get a nice seg fault. You've been warned!
 * TODO: error case handling
 */
static int skanti_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len)
{
	int retval;
	struct rig_state *rs;
	char retbuf[BUFSZ+1];

	rs = &rig->state;

	serial_flush(&rs->rigport);

	retval = write_block(&rs->rigport, cmd, cmd_len);
	if (retval != RIG_OK)
			return retval;


	/* no data expected, check for OK returned */
	if (!data || !data_len) {
		/*
	 	* Transceiver sends back ">"
	 	*/
		retval = read_string(&rs->rigport, retbuf, BUFSZ, PROMPT, strlen(PROMPT));
		if (retval < 0 || retval > BUFSZ)
			return RIG_ERJCTED;

		retbuf[retval] = '\0';

		if (strstr(retbuf, PROMPT)) 
			return RIG_OK;
		else
			return RIG_ERJCTED;
	}

	*data_len = read_string(&rs->rigport, data, BUFSZ, LF, strlen(LF));

	/* strip CR/LF from string
	 */
	*data_len -= 2;
	data[*data_len] = 0;
	return RIG_OK;
}


/*
 * skanti_reset
 * Assumes rig!=NULL
 */
int skanti_reset(RIG *rig, reset_t reset)
{
	int retval;

	/*
	 * master reset
	 *
	 * returned data: *x1A345SF
	 * 	 whatever this means? unit serial #?
	 */

	retval = skanti_transaction (rig, "0" EOM, strlen("0" EOM), NULL, NULL);

	return RIG_OK;
}



/*
 * skanti_set_freq
 * Assumes rig!=NULL
 */
int skanti_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
	char freqbuf[BUFSZ];
	int freq_len;

	/* 6 digits */
	freq_len = sprintf(freqbuf, "Z%06ld" EOM, (long)(freq/100));

	return skanti_transaction (rig, freqbuf, freq_len, NULL, NULL);
}

/*
 * skanti_set_mode
 * Assumes rig!=NULL
 */
int skanti_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
	int retval;
	char *sk_mode, *sk_filter;
	pbwidth_t passband_normal;

	switch (mode) {
		/* TODO: MCW, R3E */
	case RIG_MODE_CW:       sk_mode = MD_CW EOM; break;
	case RIG_MODE_USB:      sk_mode = MD_USB EOM; break;
	case RIG_MODE_LSB:      sk_mode = MD_LSB EOM; break;
	case RIG_MODE_RTTY:     sk_mode = MD_RTTY EOM; break;
	case RIG_MODE_AM:       sk_mode = MD_AM EOM; break;
	default:
		rig_debug(RIG_DEBUG_ERR, "%s: unsupported mode %d\n",
				__FUNCTION__, mode);
		return -RIG_EINVAL;
	}

	retval = skanti_transaction (rig, sk_mode, strlen(sk_mode), NULL, NULL);
	if (retval != RIG_OK)
		return retval;

	/*
	 * TODO: please sk8000 owners, check this, I'm not sure
	 * 			which passband is default!
	 */
	passband_normal = rig_passband_normal(rig, mode);
	if (width == RIG_PASSBAND_NORMAL || 
				width == passband_normal)
		sk_filter = "I" EOM;
	else if (width < passband_normal)
		sk_filter = width < 1000 ? "V" EOM : "N" EOM;
	else
		sk_filter = "W" EOM;

	retval = skanti_transaction (rig, sk_filter, strlen(sk_filter), NULL, NULL);

	return retval;
}


/*
 * skanti_set_split_freq
 * Assumes rig!=NULL
 */
int skanti_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq)
{
	char freqbuf[BUFSZ];
	int freq_len;

	/* 6 digits */
	freq_len = sprintf(freqbuf, "T%06ld" EOM, (long)(tx_freq/100));

	return skanti_transaction (rig, freqbuf, freq_len, NULL, NULL);
}



/*
 * skanti_set_level
 * Assumes rig!=NULL
 * FIXME: cannot support PREAMP and ATT both at same time (make sense though)
 */
int skanti_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
	int cmd_len;
	char cmdbuf[BUFSZ], *agc;

	/* Optimize:
	 *   sort the switch cases with the most frequent first
	 */
	switch (level) {
	case RIG_LEVEL_PREAMP:
		cmd_len = sprintf(cmdbuf, "R%c" EOM, val.i?'F':'O');

		return skanti_transaction (rig, cmdbuf, cmd_len, NULL, NULL);

	case RIG_LEVEL_ATT:
		cmd_len = sprintf(cmdbuf, "A%c" EOM, val.i?'T':'O');

		return skanti_transaction (rig, cmdbuf, cmd_len, NULL, NULL);

	case RIG_LEVEL_RFPOWER:
		cmd_len = sprintf(cmdbuf, "M%cO" EOM, val.f<0.33?'L':(val.f<0.66?'M':'F'));

		return skanti_transaction (rig, cmdbuf, cmd_len, NULL, NULL);

	case RIG_LEVEL_AGC:
		switch (val.i) {
			case RIG_AGC_SLOW: agc = "AS"EOM; break;
			case RIG_AGC_FAST: agc = "AA"EOM; break;
			case RIG_AGC_OFF: agc = "AF"EOM; break;
			default: return -RIG_EINVAL;
		}
		return skanti_transaction (rig, agc, strlen(agc), NULL, NULL);

	default:
		rig_debug(RIG_DEBUG_ERR,"Unsupported set_level %d\n", level);
		return -RIG_EINVAL;
	}


	return RIG_OK;
}


/*
 * skanti_set_ptt
 * Assumes rig!=NULL, ptt!=NULL
 */
int skanti_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
{
	char cmdbuf[BUFSZ];
	int cmd_len;

	cmd_len = sprintf(cmdbuf, "X%c" EOM, ptt == RIG_PTT_ON?'N':'F');

	return skanti_transaction (rig, cmdbuf, cmd_len, NULL, NULL);
}


int skanti_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
{
	if (op != RIG_OP_TUNE)
		return -RIG_EINVAL;

	return skanti_transaction (rig, "XT"EOM, strlen("XT"EOM), NULL, NULL);
}



/*
 * initrigs_skanti is called by rig_backend_load
 */
DECLARE_INITRIG_BACKEND(skanti)
{
	rig_debug(RIG_DEBUG_VERBOSE, "skanti: _init called\n");

	rig_register(&trp8000_caps);

	return RIG_OK;
}