Hamlib/icom/omni.c

251 wiersze
7.9 KiB
C

/*
* Hamlib CI-V backend - description of the TenTenc OMNI VI
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
/* Improvements by Martin Ewing, AA6E, 3/2008
* This backend should support either the Ten-Tec Omni VI Plus (564) or the
* Omni VI (563). Tested on an Omni VI.
*/
/* Known problems:
*
* To Do:
* Implement vfo split, FSK mode
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include <misc.h>
#define OMNIVIP_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define OMNIVIP_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define OMNIVIP_ALL_RX_MODES (OMNIVIP_OTHER_TX_MODES)
#define OMNIVIP_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define OMNIVIP_STR_CAL { 0, { } }
static int omni6_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
static int omni6_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit);
static int omni6_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit);
static const struct icom_priv_caps omnivip_priv_caps = {
0x04, /* default address */
0, /* 731 mode */
NULL /* TODO */
};
const struct rig_caps omnivip_caps = {
.rig_model = RIG_MODEL_OMNIVIP,
.model_name = "Omni VI Plus",
.mfg_name = "Ten-Tec",
.version = "0.2",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG, // Allow program controlled PTT
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(9980),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = OMNIVIP_VFO_OPS,
.scan_ops = RIG_SCAN_NONE,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { { 0, 99, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
RIG_CHAN_END, },
.rx_range_list1 = {
RIG_FRNG_END, },
.tx_range_list1 = { RIG_FRNG_END, },
/* These limits measured on Omni VI SN 1A10473 */
.rx_range_list2 = {
{kHz(1770),kHz(2330),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(3471),kHz(4030),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(6821),kHz(7338),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(9971),kHz(10530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(13971),kHz(14530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(17971),kHz(18530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(20971),kHz(21530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(24471),kHz(25030),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
{kHz(27971),kHz(30030),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL},
RIG_FRNG_END, },
/* Note: There is no AM mode. */
.tx_range_list2 = {
{kHz(1800),MHz(2)-1,OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{kHz(3500),MHz(4)-1,OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{MHz(7),kHz(7300),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{kHz(10100),kHz(10150),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{MHz(14),kHz(14350),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{kHz(18068),kHz(18168),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{MHz(21),kHz(21450),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{kHz(24890),kHz(24990),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
{MHz(28),kHz(29700),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{OMNIVIP_ALL_RX_MODES, Hz(10)}, // This radio has 10 Hz steps.
RIG_TS_END,
},
/* mode/filter list, remember: order matters!
* Possible XTAL filters: 2.4, 1.8, 0.5, 0.25 kHz - may not all be
* present. FM filter is 15 kHz.
* We are not supporting the 'FSK' (RTTY) mode at this time.
*/
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.4)},
{RIG_MODE_FM, kHz(15)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&omnivip_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo, // icom.c has no get_vfo
.set_rit = omni6_set_rit,
.get_rit = omni6_get_rit, // icom.c has no get_rit
.set_xit = omni6_set_rit, // xit=rit for this rig
.get_xit = omni6_get_rit, // (front panel controlled)
.set_ptt = omni6_set_ptt,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
};
/*
* omni6_set_ptt based on icom_set_ptt
* Assumes rig!=NULL, rig->state.priv!=NULL
*/
int omni6_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
{
int retval, sc;
sc = ptt == RIG_PTT_ON ? 0x1 : 0x2;
/*
* Ignore ACK/NAK on this command, because in CW mode, the Omni VI
* does not send an ACK.
*/
retval = icom_transaction (rig, C_OMNI6_XMT, sc, NULL, 0, NULL, NULL);
if (retval != RIG_OK)
return retval;
return RIG_OK;
}
/*
* These 'rit' commands actually deal with an offset frequency. The operator
* must select rit on/off or xit on/off manually to apply this offset.
* Omni VI's rit uses 9's complement for negative freq, and freqs are in units
* of 10 Hz. on the Omni.
* Note that Omni VI rejects rit > 9980, but takes rit >= -9990. So the
* rit limit should be +/- 9.98 kHz.
*/
int omni6_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
{
unsigned char freqbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
int freq_len, ack_len=sizeof(ackbuf), retval;
shortfreq_t rit10;
rit10 = rit / 10; // 10 Hz resolution for Omni
if (rit10 < 0) rit10 += 10000L; // 9's compl.
freq_len = 2;
to_bcd(freqbuf, rit10, 2*freq_len);
retval = icom_transaction (rig, C_SET_OFFS, -1, freqbuf, freq_len,
ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
if (ack_len != 1 || ackbuf[0] != ACK) {
rig_debug(RIG_DEBUG_ERR,"omni6_set_rit: ack NG (%#.2x), "
"len=%d\n", ackbuf[0],ack_len);
return -RIG_ERJCTED;
}
return RIG_OK;
}
/*
* Note: icom.c does not provide a get_rit method. It would have been
* wrong for the Omni VI, anyway, so we implement it here.
*/
int omni6_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit)
{
unsigned char buffer[MAXFRAMELEN];
int buffer_len, retval;
shortfreq_t my_rit;
retval = icom_transaction (rig, C_RD_OFFS, -1, NULL, 0,
buffer, & buffer_len);
if (retval != RIG_OK)
return retval;
if (buffer_len != 3) {
rig_debug(RIG_DEBUG_ERR,"omni6_get_rit: wrong length response (%d)\n",
buffer_len);
return -RIG_ERJCTED;
}
my_rit = 10*from_bcd(buffer, 2*buffer_len);
if (my_rit > 10000L) my_rit -= 100000L; // 9's compl for negatives
*rit = my_rit;
return RIG_OK;
}