Hamlib/icom/ic718.c

205 wiersze
6.1 KiB
C

/*
* Hamlib CI-V backend - description of IC-718 caps
* Copyright (c) 2000-2010 by Stephane Fillod
* Caps submitted by Chuck Gilkes WD0FCL/4
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
#include "idx_builtin.h"
#include "bandplan.h"
#define IC718_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC718_1MHZ_TS_MODES (RIG_MODE_AM)
#define IC718_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
/* tx doesn't have WFM.
* 100W in all modes but AM (40W)
*/
#define IC718_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC718_AM_TX_MODES (RIG_MODE_AM)
#define IC718_FUNC_ALL (RIG_FUNC_NR|RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_ANF)
#define IC718_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_MICGAIN|RIG_LEVEL_NR|RIG_LEVEL_CWPITCH|RIG_LEVEL_KEYSPD|RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_RAWSTR|RIG_LEVEL_SQL)
#define IC718_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define IC718_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC718_SCAN_OPS (RIG_SCAN_MEM)
/*
* TODO: check whether func and levels are stored in memory
*/
#define IC718_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.tx_freq = 1, \
.tx_mode = 1, \
.tx_width = 1, \
}
#define IC718_STR_CAL UNKNOWN_IC_STR_CAL
static const struct icom_priv_caps IC718_priv_caps = {
0x5e, /* default address */
0, /* 731 mode */
ic718_ts_sc_list
};
const struct rig_caps ic718_caps = {
.rig_model = RIG_MODEL_IC718,
.model_name = "IC-718",
.mfg_name = "Icom",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = IC718_FUNC_ALL,
.has_set_func = IC718_FUNC_ALL,
.has_get_level = IC718_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC718_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.str_cal = IC718_STR_CAL,
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC718_VFO_OPS,
.scan_ops = IC718_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, IC718_MEM_CAP },
{ 100, 101, RIG_MTYPE_EDGE, IC718_MEM_CAP }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30),MHz(30)-1,IC718_ALL_RX_MODES,-1,-1,IC718_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1, IC718_OTHER_TX_MODES, W(5),W(100),IC718_VFO_ALL,RIG_ANT_1),
FRQ_RNG_HF(1, IC718_AM_TX_MODES, W(2),W(40), IC718_VFO_ALL,RIG_ANT_1), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = { {kHz(30),MHz(30)-1,IC718_ALL_RX_MODES,-1,-1,IC718_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = {
FRQ_RNG_HF(2, IC718_OTHER_TX_MODES, W(5),W(100),IC718_VFO_ALL,RIG_ANT_1),
FRQ_RNG_HF(2, IC718_AM_TX_MODES, W(2),W(40), IC718_VFO_ALL,RIG_ANT_1), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC718_1HZ_TS_MODES,1},
{IC718_ALL_RX_MODES,10},
{IC718_ALL_RX_MODES,100},
{IC718_ALL_RX_MODES,kHz(1)},
{IC718_ALL_RX_MODES,kHz(5)},
{IC718_ALL_RX_MODES,kHz(9)},
{IC718_ALL_RX_MODES,kHz(10)},
{IC718_ALL_RX_MODES,kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.1)}, /* bultin */
{RIG_MODE_CW|RIG_MODE_RTTY, Hz(500)}, /* FL-52A */
{RIG_MODE_CW|RIG_MODE_RTTY, Hz(250)}, /* FL-53A */
{RIG_MODE_SSB, kHz(2.8)}, /* FL-96 */
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(1.8)}, /* FL-222 */
{RIG_MODE_AM, kHz(6)}, /* mid w/ bultin FL-94 */
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&IC718_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_mem_get_split_vfo,
};