Hamlib/icom/ic7800.c

383 wiersze
13 KiB
C

/*
* Hamlib CI-V backend - description of IC-7800 and variations
* Copyright (c) 2009-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <hamlib/rig.h>
#include "token.h"
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "misc.h"
#include "bandplan.h"
#define IC7800_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_PSK|RIG_MODE_PSKR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTAM|RIG_MODE_PKTFM)
#define IC7800_1HZ_TS_MODES IC7800_ALL_RX_MODES
#define IC7800_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_PSK|RIG_MODE_PSKR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTFM)
#define IC7800_AM_TX_MODES (RIG_MODE_AM|RIG_MODE_PKTAM)
#define IC7800_FUNCS (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK|RIG_FUNC_RIT|RIG_FUNC_XIT|RIG_FUNC_TUNER|RIG_FUNC_APF|RIG_FUNC_DUAL_WATCH)
#define IC7800_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF|RIG_LEVEL_VOXGAIN|RIG_LEVEL_ANTIVOX|RIG_LEVEL_VOXDELAY|RIG_LEVEL_SWR|RIG_LEVEL_ALC|RIG_LEVEL_RFPOWER_METER|RIG_LEVEL_COMP_METER|RIG_LEVEL_VD_METER|RIG_LEVEL_ID_METER|RIG_LEVEL_MONITOR_GAIN|RIG_LEVEL_NB)
#define IC7800_VFOS (RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM)
#define IC7800_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
#define IC7800_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL|RIG_OP_TUNE)
#define IC7800_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO)
#define IC7800_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3|RIG_ANT_4)
// IC-7800 S-meter calibration data based on manual
#define IC7800_STR_CAL { 3, \
{ \
{ 0, -54 }, /* S0 */ \
{ 120, 0 }, /* S9 */ \
{ 241, 60 } /* S9+60 */ \
} }
#define IC7800_SWR_CAL { 5, \
{ \
{ 0, 1.0f }, \
{ 48, 1.5f }, \
{ 80, 2.0f }, \
{ 120, 3.0f }, \
{ 240, 6.0f } \
} }
#define IC7800_ALC_CAL { 2, \
{ \
{ 0, 0.0f }, \
{ 120, 1.0f } \
} }
#define IC7800_RFPOWER_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 143, 0.5f }, \
{ 213, 1.0f } \
} }
#define IC7800_COMP_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 130, 15.0f }, \
{ 241, 30.0f } \
} }
#define IC7800_VD_METER_CAL { 4, \
{ \
{ 0, 0.0f }, \
{ 151, 44.0f }, \
{ 180, 48.0f }, \
{ 211, 52.0f } \
} }
#define IC7800_ID_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 165, 10.0f }, \
{ 241, 15.0f } \
} }
int ic7800_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
int ic7800_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
/*
* IC-7800 rig capabilities.
*
* TODO: complete command set (esp. the $1A bunch!) and testing..
*/
static const struct icom_priv_caps ic7800_priv_caps = {
0x6a, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic756pro_ts_sc_list,
.agc_levels_present = 1,
.agc_levels = {
{ .level = RIG_AGC_OFF, .icom_level = 0 },
{ .level = RIG_AGC_FAST, .icom_level = 1 },
{ .level = RIG_AGC_MEDIUM, .icom_level = 2 },
{ .level = RIG_AGC_SLOW, .icom_level = 3 },
{ .level = -1, .icom_level = 0 },
},
};
const struct confparams ic7800_ext_levels[] = {
{ TOK_DRIVE_GAIN, "drive_gain", "Drive gain", "Drive gain",
NULL, RIG_CONF_NUMERIC, { .n = { 0, 255, 1 } },
},
{ TOK_DIGI_SEL_FUNC, "digi_sel", "DIGI-SEL enable", "DIGI-SEL enable",
NULL, RIG_CONF_CHECKBUTTON, { },
},
{ TOK_DIGI_SEL_LEVEL, "digi_sel_level", "DIGI-SEL level", "DIGI-SEL level",
NULL, RIG_CONF_NUMERIC, { .n = { 0, 255, 1 } },
},
{ RIG_CONF_END, NULL, }
};
const struct rig_caps ic7800_caps = {
.rig_model = RIG_MODEL_IC7800,
.model_name = "IC-7800",
.mfg_name = "Icom",
.version = BACKEND_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC7800_FUNCS,
.has_set_func = IC7800_FUNCS,
.has_get_level = IC7800_LEVELS,
.has_set_level = RIG_LEVEL_SET(IC7800_LEVELS),
.has_get_parm = IC7800_PARMS,
.has_set_parm = RIG_PARM_SET(IC7800_PARMS), /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } },
[LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } },
},
.parm_gran = {},
.extlevels = ic7800_ext_levels,
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */
.attenuator = { 3, 6, 9, 12, 15, 18, 21, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC7800_VFO_OPS,
.scan_ops = IC7800_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30),MHz(60),IC7800_ALL_RX_MODES,-1,-1,IC7800_VFOS,IC7800_ANTS},
RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_6m(1,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_HF(1,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
FRQ_RNG_6m(1,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),MHz(60),IC7800_ALL_RX_MODES,-1,-1,IC7800_VFOS,IC7800_ANTS},
RIG_FRNG_END, },
.tx_range_list2 = {
FRQ_RNG_HF(2,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_6m(2,IC7800_OTHER_TX_MODES, W(5),W(200),IC7800_VFOS,IC7800_ANTS),
FRQ_RNG_HF(2,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
FRQ_RNG_6m(2,IC7800_AM_TX_MODES, W(5),W(50),IC7800_VFOS,IC7800_ANTS), /* AM class */
/* USA only, TBC: end of range and modes */
{MHz(5.33050),MHz(5.33350),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.34650),MHz(5.34950),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.36650),MHz(5.36950),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.37150),MHz(5.37450),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
{MHz(5.40350),MHz(5.40650),IC7800_OTHER_TX_MODES,W(2),W(100),IC7800_VFOS,IC7800_ANTS}, /* USA only */
RIG_FRNG_END, },
.tuning_steps = {
{IC7800_1HZ_TS_MODES,1},
{IC7800_ALL_RX_MODES,Hz(100)},
{IC7800_ALL_RX_MODES,kHz(1)},
{IC7800_ALL_RX_MODES,kHz(5)},
{IC7800_ALL_RX_MODES,kHz(9)},
{IC7800_ALL_RX_MODES,kHz(10)},
{IC7800_ALL_RX_MODES,kHz(12.5)},
{IC7800_ALL_RX_MODES,kHz(20)},
{IC7800_ALL_RX_MODES,kHz(25)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB, kHz(2.4)},
{RIG_MODE_SSB|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB, kHz(1.8)},
{RIG_MODE_SSB|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB, kHz(3)},
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PSK|RIG_MODE_PSKR, Hz(400)},
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PSK|RIG_MODE_PSKR, Hz(50)},
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_PSK|RIG_MODE_PSKR, kHz(1.0)},
{RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_AM|RIG_MODE_PKTAM, kHz(6)},
{RIG_MODE_AM|RIG_MODE_PKTAM, kHz(3)},
{RIG_MODE_AM|RIG_MODE_PKTAM, kHz(9)},
{RIG_MODE_FM|RIG_MODE_PKTFM, kHz(12)},
{RIG_MODE_FM|RIG_MODE_PKTFM, kHz(8)},
{RIG_MODE_FM|RIG_MODE_PKTFM, kHz(15)},
RIG_FLT_END,
},
.str_cal = IC7800_STR_CAL,
.swr_cal = IC7800_SWR_CAL,
.alc_cal = IC7800_ALC_CAL,
.rfpower_meter_cal = IC7800_RFPOWER_METER_CAL,
.comp_meter_cal = IC7800_COMP_METER_CAL,
.vd_meter_cal = IC7800_VD_METER_CAL,
.id_meter_cal = IC7800_ID_METER_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic7800_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode_with_data,
.get_mode = icom_get_mode_with_data,
.set_vfo = icom_set_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.set_rit = icom_set_rit_new,
.get_rit = icom_get_rit_new,
.get_xit = icom_get_rit_new,
.set_xit = icom_set_xit_new,
.decode_event = icom_decode_event,
.set_level = ic7800_set_level,
.get_level = ic7800_get_level,
.set_ext_level = icom_set_ext_level,
.get_ext_level = icom_get_ext_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_get_split_vfo,
.set_powerstat = icom_set_powerstat,
.get_powerstat = icom_get_powerstat,
.send_morse = icom_send_morse
};
/*
* IC-7800 has 0x11 command using index instead of backend's real dB value
*
* c.f. http://www.plicht.de/ekki/civ/civ-p42.html
*/
int ic7800_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
unsigned char cmdbuf[MAXFRAMELEN];
int i;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level) {
case RIG_LEVEL_ATT:
if (val.i != 0) {
/* Convert dB to index */
for (i = 0; i < 7; i++) {
if (val.i == rig->state.attenuator[i]) {
val.i = i + 1;
break;
}
}
/* TODO: Should fail when not found? */
}
return icom_set_level(rig, vfo, level, val);
case RIG_LEVEL_VOXDELAY:
cmdbuf[0] = 0x01;
cmdbuf[1] = 0x83;
return icom_set_level_raw(rig, level, C_CTL_MEM, 0x05, 2, cmdbuf, 1, val);
default:
return icom_set_level(rig, vfo, level, val);
}
}
/*
* IC-7800 has 0x11 command using index instead of backend's real dB value
*/
int ic7800_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
unsigned char cmdbuf[MAXFRAMELEN];
int retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level) {
case RIG_LEVEL_ATT:
retval = icom_get_level(rig, vfo, level, val);
if (retval != RIG_OK) {
return retval;
}
/* Convert index to dB
* Rem: ATT index 0 means attenuator Off
*/
if (val->i > 0 && val->i <= 7) {
val->i = rig->state.attenuator[val->i - 1];
}
break;
case RIG_LEVEL_VOXDELAY:
cmdbuf[0] = 0x01;
cmdbuf[1] = 0x83;
return icom_get_level_raw(rig, level, C_CTL_MEM, 0x05, 2, cmdbuf, val);
default:
return icom_get_level(rig, vfo, level, val);
}
return RIG_OK;
}