Hamlib/icom/ic775.c

177 wiersze
5.6 KiB
C

/*
* Hamlib CI-V backend - description of IC-775 and variations
* Copyright (c) 2000-2002 by Stephane Fillod
*
* $Id: ic775.c,v 1.3 2002-11-04 22:40:54 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <hamlib/rig.h>
#include "icom.h"
#define IC775_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC775_1MHZ_TS_MODES (RIG_MODE_AM|RIG_MODE_FM)
#define IC775_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
/*
* 100W in all modes but AM (40W)
*/
#define IC775_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC775_AM_TX_MODES (RIG_MODE_AM)
#define IC775_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
#define IC775_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define IC775_STR_CAL { 0, { } }
/*
*/
static const struct icom_priv_caps ic775_priv_caps = {
0x46, /* default address */
0, /* 731 mode */
ic737_ts_sc_list,
IC775_STR_CAL
};
const struct rig_caps ic775_caps = {
.rig_model = RIG_MODEL_IC775,
.model_name = "IC-775",
.mfg_name = "Icom",
.version = "0.2",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC775_VFO_OPS,
.scan_ops = RIG_SCAN_NONE,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 10, RIG_MTYPE_MEM },
{ 11, 12, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),MHz(30),IC775_ALL_RX_MODES,-1,-1,IC775_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = { {kHz(1800),MHz(2)-1,IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL}, /* 100W class */
{kHz(1800),MHz(2)-1,IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL}, /* 40W class */
{kHz(3500),MHz(4)-1,IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{kHz(3500),MHz(4)-1,IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
{MHz(7),kHz(7300),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{MHz(7),kHz(7300),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
{kHz(10100),kHz(10150),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{kHz(10100),kHz(10150),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
{MHz(14),kHz(14350),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{MHz(14),kHz(14350),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
{kHz(18068),kHz(18168),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{kHz(18068),kHz(18168),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
{MHz(21),kHz(21450),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{MHz(21),kHz(21450),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
{kHz(24890),kHz(24990),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{kHz(24890),kHz(24990),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
{MHz(28),kHz(29700),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
{MHz(28),kHz(29700),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{IC775_1HZ_TS_MODES,1},
{IC775_ALL_RX_MODES,10},
{IC775_ALL_RX_MODES,100},
{IC775_ALL_RX_MODES,kHz(1)},
{IC775_ALL_RX_MODES,kHz(5)},
{IC775_ALL_RX_MODES,kHz(9)},
{IC775_ALL_RX_MODES,kHz(10)},
{IC775_ALL_RX_MODES,12500},
{IC775_ALL_RX_MODES,kHz(20)},
{IC775_ALL_RX_MODES,kHz(25)},
{IC775_ALL_RX_MODES,kHz(100)},
{IC775_1MHZ_TS_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)}, /* bultin FL-272 */
{RIG_MODE_AM, kHz(8)}, /* mid w/ bultin FL-94 */
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
{RIG_MODE_FM, kHz(15)}, /* ?? TBC, mid w/ bultin FL-23+SFPC455E */
{RIG_MODE_FM, kHz(8)}, /* narrow w/ bultin FL-94 */
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic775_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
};