mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/alinco/dx77.c

193 wiersze
5.8 KiB
C
Czysty Wina Historia

/*
* Hamlib Alinco backend - DX77 description
* Copyright (c) 2001-2003 by Stephane Fillod
*
* $Id: dx77.c,v 1.6 2003-04-06 18:40:35 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <hamlib/rig.h>
#include "alinco.h"
#define DX77_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DX77_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DX77_AM_TX_MODES RIG_MODE_AM
#define DX77_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TONE|RIG_FUNC_COMP)
#define DX77_LEVEL_ALL (RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH|RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD|RIG_LEVEL_BKINDL|RIG_LEVEL_CWPITCH)
#define DX77_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT)
#define DX77_VFO (RIG_VFO_A|RIG_VFO_B)
/* 90 is S9 */
#define DX77_STR_CAL { 13, { \
{ 0, -60 }, \
{ 28, -48 }, \
{ 36, -42 }, \
{ 42, -36 }, \
{ 50, -30 }, \
{ 58, -24 }, \
{ 66, -18 }, \
{ 74, -12 }, \
{ 82, -6 }, \
{ 90, 0 }, \
{ 132, 20 }, \
{ 174, 40 }, \
{ 216, 60 }, \
} }
static const struct alinco_priv_caps dx77_priv_caps = {
DX77_STR_CAL
};
/*
* dx77 rig capabilities.
*
* protocol is documented at
* http://www.alinco.com/pdf.files/DX77-77_SOFTWARE_MANUAL.pdf
*
* This backend was a pleasure to develop. Documentation is clear,
* and the protocol logical. I'm wondering is the rig's good too. --SF
*
* TODO:
* - get_parm/set_parm and some LEVELs left (Set Data "2W" command).
* - tuner
* - up/down
* - scan
*/
const struct rig_caps dx77_caps = {
.rig_model = RIG_MODEL_DX77,
.model_name = "DX-77",
.mfg_name = "Alinco",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = DX77_FUNC,
.has_set_func = DX77_FUNC|RIG_FUNC_MON,
.has_get_level = DX77_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(DX77_LEVEL_ALL),
.has_get_parm = DX77_PARM_ALL,
.has_set_parm = RIG_PARM_SET(DX77_PARM_ALL),
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END },
.attenuator = { 10, 20, RIG_DBLST_END },
.max_rit = kHz(1),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 99, RIG_MTYPE_MEM },
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(500),MHz(30),DX77_ALL_MODES,-1,-1,DX77_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
{kHz(1800),MHz(2)-100,DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(1800),MHz(2)-100,DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(3500),MHz(4)-100,DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(3500),MHz(4)-100,DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(7),kHz(7300),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(7),kHz(7300),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(10100),kHz(10150),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(10100),kHz(10150),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(14),kHz(14350),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(14),kHz(14350),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(18068),kHz(18168),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(18068),kHz(18168),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(21),kHz(21450),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(21),kHz(21450),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{kHz(24890),kHz(24990),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{kHz(24890),kHz(24990),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
{MHz(28),kHz(29700),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
{MHz(28),kHz(29700),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
RIG_FRNG_END,
},
.tuning_steps = {
{DX77_ALL_MODES,10}, /* FIXME: add other ts */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.7)},
{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
{RIG_MODE_AM, kHz(2.7)},
RIG_FLT_END,
},
.priv = (void*)&dx77_priv_caps,
.set_freq = alinco_set_freq,
.get_freq = alinco_get_freq,
.set_mode = alinco_set_mode,
.get_mode = alinco_get_mode,
.set_vfo = alinco_set_vfo,
.get_vfo = alinco_get_vfo,
.set_split_vfo = alinco_set_split_vfo,
.get_split_vfo = alinco_get_split_vfo,
.set_split_freq = alinco_set_split_freq,
.get_split_freq = alinco_get_split_freq,
.set_ctcss_tone = alinco_set_ctcss_tone,
.get_rit = alinco_get_rit,
.get_ptt = alinco_get_ptt,
.get_dcd = alinco_get_dcd,
.set_func = alinco_set_func,
.get_func = alinco_get_func,
.set_level = alinco_set_level,
.get_level = alinco_get_level,
.set_mem = alinco_set_mem,
.get_mem = alinco_get_mem,
};
/*
* Function definitions below
*/
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik