Hamlib/rigs/icom/icr6.c

174 wiersze
5.1 KiB
C

/*
* Hamlib CI-V backend - description of IC-R6
* Copyright (c) 2017 Malcolm Herring
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
#include "idx_builtin.h"
#define ICR6_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define ICR6_FUNC_ALL (RIG_FUNC_TSQL|RIG_FUNC_VSC|RIG_FUNC_CSQL|RIG_FUNC_AFLT|RIG_FUNC_DSQL)
#define ICR6_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH)
#define ICR6_VFO_ALL (RIG_VFO_A)
#define ICR6_VFO_OPS (RIG_OP_NONE)
#define ICR6_SCAN_OPS (RIG_SCAN_NONE)
#define ICR6_STR_CAL { 2, \
{ \
{ 0, -60 }, /* S0 */ \
{ 255, 60 } /* +60 */ \
} }
static const struct icom_priv_caps icr6_priv_caps =
{
0x7e, /* default address */
0, /* 731 mode */
0, /* no XCHG */
r8500_ts_sc_list /* wrong, but don't have set_ts anyway */
};
const struct rig_caps icr6_caps =
{
.rig_model = RIG_MODEL_ICR6,
.model_name = "IC-R6",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_RECEIVER | RIG_FLAG_HANDHELD,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = ICR6_FUNC_ALL,
.has_set_func = ICR6_FUNC_ALL,
.has_get_level = ICR6_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ICR6_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR6_VFO_OPS,
.scan_ops = ICR6_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {RIG_CHAN_END,},
.rx_range_list1 = { /* Other countries but France */
{kHz(100), GHz(1.309995), ICR6_MODES, -1, -1, ICR6_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { /* USA */
{kHz(100), MHz(821.995), ICR6_MODES, -1, -1, ICR6_VFO_ALL},
{MHz(851), MHz(866.995), ICR6_MODES, -1, -1, ICR6_VFO_ALL},
{MHz(896), GHz(1.309995), ICR6_MODES, -1, -1, ICR6_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{ICR6_MODES, Hz(5000)},
{ICR6_MODES, Hz(6250)},
{ICR6_MODES, Hz(10000)},
{ICR6_MODES, Hz(12500)},
{ICR6_MODES, kHz(15)},
{ICR6_MODES, kHz(20)},
{ICR6_MODES, kHz(25)},
{ICR6_MODES, kHz(30)},
{ICR6_MODES, kHz(50)},
{ICR6_MODES, kHz(100)},
{ICR6_MODES, kHz(125)},
{ICR6_MODES, kHz(200)},
/* Air band only */
{ICR6_MODES, Hz(8330)},
/* AM broadcast band only */
{ICR6_MODES, Hz(9000)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_AM | RIG_MODE_FM, kHz(12)},
{RIG_MODE_WFM, kHz(150)},
RIG_FLT_END,
},
.str_cal = ICR6_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& icr6_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.get_dcd = icom_get_dcd,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_sql,
.get_dcs_sql = icom_get_dcs_sql,
};