mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/yaesu/ft990v12.c

3629 wiersze
99 KiB
C
Czysty Wina Historia

/*
* hamlib - (C) Stephane Fillod 2002-2010 (fillods at users.sourceforge.net)
* (C) Terry Embry 2009
*
* ft990.c - (C) Berndt Josef Wulf (wulf at ping.net.au)
*
* This shared library provides an API for communicating
* via serial interface to an FT-990 using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
/* THIS FILE WAS MODIFIED IN DECEMBER 2016 TO REMOVE ANY REFERENCE TO THE FT-1000/D. SEPARATE ft1000d.c and .h FILES
* WERE CREATED TO HANDLE FT-1000/D COMMANDS AND PROVIDE THE FULL RANGE OF FUNCTIONS AVAILABLE ON THE FT-1000/D
* TO MAXIMISE COMPATIBILITY WITH RIGCTL.
* G0OAN
*/
/* MODIFIED VERSION for FT-990 with ROM v1.2 : June 2022
* The standard version was written for FT-990 with ROM v1.3 and as the CAT spec was different to ROM v1.2 CAT
* would not work with the older ROM. This version enables ROM v1.2 to work although it is necessary to accept
* that frequent polling functionality is not feasible with this older ROM. With ROM v1.2 polling fetches 1492
* bytes which at 4800 Baud takes about 3.8 seconds during which the FT-990 has a CAT blackout. The longest poll
* interval available in WSJT-X is 99 seconds.
* Collaboration between M0EZP David Brewerton and K1MMI Edmund Hajjar
*/
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "ft990v12.h"
// FT990 native commands
enum ft990v12_native_cmd_e
{
FT990_NATIVE_SPLIT_OFF = 0,
FT990_NATIVE_SPLIT_ON,
FT990_NATIVE_RECALL_MEM,
FT990_NATIVE_VFO_TO_MEM,
FT990_NATIVE_LOCK_OFF,
FT990_NATIVE_LOCK_ON,
FT990_NATIVE_VFO_A,
FT990_NATIVE_VFO_B,
FT990_NATIVE_MEM_TO_VFO,
FT990_NATIVE_VFO_STEP_UP,
FT990_NATIVE_VFO_STEP_UP_FAST,
FT990_NATIVE_VFO_STEP_DOWN,
FT990_NATIVE_VFO_STEP_DOWN_FAST,
FT990_NATIVE_RX_CLARIFIER_OFF,
FT990_NATIVE_RX_CLARIFIER_ON,
FT990_NATIVE_TX_CLARIFIER_OFF,
FT990_NATIVE_TX_CLARIFIER_ON,
FT990_NATIVE_CLEAR_CLARIFIER_OFFSET,
FT990_NATIVE_CLARIFIER_OPS,
FT990_NATIVE_FREQ_SET,
FT990_NATIVE_MODE_SET_LSB,
FT990_NATIVE_MODE_SET_USB,
FT990_NATIVE_MODE_SET_CW_W,
FT990_NATIVE_MODE_SET_CW_N,
FT990_NATIVE_MODE_SET_AM_W,
FT990_NATIVE_MODE_SET_AM_N,
FT990_NATIVE_MODE_SET_FM,
FT990_NATIVE_MODE_SET_RTTY_LSB,
FT990_NATIVE_MODE_SET_RTTY_USB,
FT990_NATIVE_MODE_SET_PKT_LSB,
FT990_NATIVE_MODE_SET_PKT_FM,
FT990_NATIVE_PACING,
FT990_NATIVE_PTT_OFF,
FT990_NATIVE_PTT_ON,
FT990_NATIVE_UPDATE_ALL_DATA,
FT990_NATIVE_UPDATE_MEM_CHNL,
FT990_NATIVE_UPDATE_OP_DATA,
FT990_NATIVE_UPDATE_VFO_DATA,
FT990_NATIVE_UPDATE_MEM_CHNL_DATA,
FT990_NATIVE_TUNER_OFF,
FT990_NATIVE_TUNER_ON,
FT990_NATIVE_TUNER_START,
FT990_NATIVE_RPTR_SHIFT_NONE,
FT990_NATIVE_RPTR_SHIFT_MINUS,
FT990_NATIVE_RPTR_SHIFT_PLUS,
FT990_NATIVE_VFO_TO_VFO,
FT990_NATIVE_BANDWIDTH,
FT990_NATIVE_OP_FREQ_STEP_UP,
FT990_NATIVE_OP_FREQ_STEP_DOWN,
FT990_NATIVE_READ_METER,
FT990_NATIVE_DIM_LEVEL,
FT990_NATIVE_RPTR_OFFSET,
FT990_NATIVE_READ_FLAGS,
FT990_NATIVE_SIZE
};
/* HAMLIB API implementation */
static int ft990v12_init(RIG *rig);
static int ft990v12_cleanup(RIG *rig);
static int ft990v12_open(RIG *rig);
static int ft990v12_close(RIG *rig);
static int ft990v12_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int ft990v12_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
static int ft990v12_set_mode(RIG *rig, vfo_t vfo, rmode_t mode,
pbwidth_t width);
static int ft990v12_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode,
pbwidth_t *width);
static int ft990v12_set_vfo(RIG *rig, vfo_t vfo);
static int ft990v12_get_vfo(RIG *rig, vfo_t *vfo);
static int ft990v12_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
static int ft990v12_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
static int ft990v12_set_rptr_shift(RIG *rig, vfo_t vfo,
rptr_shift_t rptr_shift);
static int ft990v12_get_rptr_shift(RIG *rig, vfo_t vfo,
rptr_shift_t *rptr_shift);
static int ft990v12_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs);
static int ft990v12_set_split_vfo(RIG *rig, vfo_t vfo, split_t split,
vfo_t tx_vfo);
static int ft990v12_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split,
vfo_t *tx_vfo);
static int ft990v12_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit);
static int ft990v12_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit);
static int ft990v12_set_func(RIG *rig, vfo_t vfo, setting_t func, int status);
static int ft990v12_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status);
static int ft990v12_set_parm(RIG *rig, setting_t parm, value_t val);
static int ft990v12_set_xit(RIG *rig, vfo_t vfo, shortfreq_t xit);
static int ft990v12_get_xit(RIG *rig, vfo_t vfo, shortfreq_t *xit);
static int ft990v12_get_level(RIG *rig, vfo_t vfo, setting_t level,
value_t *val);
static int ft990v12_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op);
static int ft990v12_set_mem(RIG *rig, vfo_t vfo, int ch);
static int ft990v12_get_mem(RIG *rig, vfo_t vfo, int *ch);
static int ft990v12_set_channel(RIG *rig, vfo_t vfo, const channel_t *chan);
static int ft990v12_get_channel(RIG *rig, vfo_t vfo, channel_t *chan,
int read_only);
/* Private helper function prototypes */
static int ft990v12_get_update_data(RIG *rig, unsigned char ci,
unsigned short ch);
static int ft990v12_send_static_cmd(RIG *rig, unsigned char ci);
static int ft990v12_send_dynamic_cmd(RIG *rig, unsigned char ci,
unsigned char p1, unsigned char p2,
unsigned char p3, unsigned char p4);
static int ft990v12_send_dial_freq(RIG *rig, unsigned char ci, freq_t freq);
static int ft990v12_send_rit_freq(RIG *rig, unsigned char ci, shortfreq_t rit);
static const yaesu_cmd_set_t ncmd[] =
{
/* ci */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x01 } }, /* 00 00 Split (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x01 } }, /* 01 01 Split (On) */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x02 } }, /* 02 02 Recall Memory */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x03 } }, /* 03 03 Memory Operations */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x04 } }, /* 04 04 Lock (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x04 } }, /* 05 05 Lock (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x05 } }, /* 06 06 Select VFO (A) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x05 } }, /* 07 07 Select VFO (B) */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x06 } }, /* 08 08 Copy Memory Data to VFO A */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x07 } }, /* 09 09 OP Freq Up 0.1MHz */
{ 1, { 0x00, 0x00, 0x01, 0x00, 0x07 } }, /* 10 0a OP Freq Up 1MHz */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x08 } }, /* 11 0b OP Freq Down 0.1MHz */
{ 1, { 0x00, 0x00, 0x01, 0x00, 0x08 } }, /* 12 0c OP Freq Down 1MHz */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x09 } }, /* 13 0d RX Clarifier (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x09 } }, /* 14 0e RX Clarifier (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x80, 0x09 } }, /* 15 0f TX Clarifier (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x81, 0x09 } }, /* 16 10 TX Clarifier (ON) */
{ 1, { 0x00, 0x00, 0x00, 0xff, 0x09 } }, /* 17 11 Clear Clarifier Offset */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x09 } }, /* 18 12 Clarifier */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0a } }, /* 19 13 Set Op Freq */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x0c } }, /* 20 14 OP Mode Set LSB */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x0c } }, /* 21 15 OP Mode Set USB */
{ 1, { 0x00, 0x00, 0x00, 0x02, 0x0c } }, /* 22 16 OP Mode Set CW 2.4KHz */
{ 1, { 0x00, 0x00, 0x00, 0x03, 0x0c } }, /* 23 17 OP Mode Set CW 500Hz */
{ 1, { 0x00, 0x00, 0x00, 0x04, 0x0c } }, /* 24 18 OP Mode Set AM 6KHz */
{ 1, { 0x00, 0x00, 0x00, 0x05, 0x0c } }, /* 25 19 OP Mode Set AM 2.4KHz */
{ 1, { 0x00, 0x00, 0x00, 0x06, 0x0c } }, /* 26 1a OP Mode Set FM */
{ 1, { 0x00, 0x00, 0x00, 0x08, 0x0c } }, /* 27 1b OP Mode Set RTTY LSB */
{ 1, { 0x00, 0x00, 0x00, 0x09, 0x0c } }, /* 28 1c OP Mode Set RTTY USB */
{ 1, { 0x00, 0x00, 0x00, 0x0a, 0x0c } }, /* 29 1d OP Mode Set PKT LSB */
{ 1, { 0x00, 0x00, 0x00, 0x0b, 0x0c } }, /* 30 1e OP Mode Set PKT FM */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0e } }, /* 31 1f Pacing */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x0f } }, /* 32 20 PTT (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x0f } }, /* 33 21 PTT (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x10 } }, /* 34 22 Update All Data (1492 bytes) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x10 } }, /* 35 23 Update Memory Ch Number M0EZP: 2ndByte was 0x01 */
{ 1, { 0x00, 0x00, 0x00, 0x02, 0x10 } }, /* 36 24 Update Op Data M0EZP: 2ndByte was 0x02 */
{ 1, { 0x00, 0x00, 0x00, 0x03, 0x10 } }, /* 37 25 Update VFO Data M0EZP: 2ndByte was 0x03 */
{ 0, { 0x00, 0x00, 0x00, 0x04, 0x10 } }, /* 38 26 Update Memory Ch Data M0EZP: 2ndByte was 0x04 */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x81 } }, /* 39 27 Tuner (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x81 } }, /* 40 28 Tuner (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x82 } }, /* 41 29 Tuner (Start) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x84 } }, /* 42 2a Repeater Mode (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x84 } }, /* 43 2b Repeater Mode (Minus) */
{ 1, { 0x00, 0x00, 0x00, 0x02, 0x84 } }, /* 44 2c Repeater Mode (Plus) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x85 } }, /* 45 2d Copy displayed VFO (A=B || B=A) */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x8C } }, /* 46 2e Select Bandwidth */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x8E } }, /* 47 2f Step Operating Frequency Up */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x8E } }, /* 48 30 Step Operating Frequency Down */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xf7 } }, /* 49 31 Read Meter */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0xf8 } }, /* 50 32 DIM Level */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0xf9 } }, /* 51 33 Set Offset for Repeater Shift */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xfa } }, /* 52 34 Read Status Flags */
};
/*
* Private data
*/
// M0EZP: status 0=uni first call, 1=uni after first call
int ft990uni_get_freq_state = 0;
struct ft990v12_priv_data
{
unsigned char pacing; /* pacing value */
vfo_t current_vfo; /* active VFO from last cmd */
unsigned char p_cmd[YAESU_CMD_LENGTH]; /* private copy of CAT cmd */
ft990v12_update_data_t update_data; /* returned data */
};
/*
* ft990 rigs capabilities.
*/
#define FT990_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.rit = 1, \
.xit = 1, \
.rptr_shift = 1, \
.flags = 1, \
}
// Old FT990 ROM has to read all 1492 to get frequency
// So for this model we just use the cache to read freq
const struct rig_caps ft990uni_caps =
{
RIG_MODEL(RIG_MODEL_FT990UNI),
.model_name = "FT-990 Old Rom",
.mfg_name = "Yaesu",
.version = "20220628.0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = FT990_WRITE_DELAY,
.post_write_delay = FT990_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 0,
.has_get_func = RIG_FUNC_LOCK | RIG_FUNC_TUNER | RIG_FUNC_MON,
.has_set_func = RIG_FUNC_LOCK | RIG_FUNC_TUNER,
.has_get_level = RIG_LEVEL_STRENGTH | RIG_LEVEL_SWR | RIG_LEVEL_ALC | \
RIG_LEVEL_RFPOWER | RIG_LEVEL_COMP,
.has_set_level = RIG_LEVEL_BAND_SELECT,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_BACKLIGHT,
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1200),
.vfo_ops = RIG_OP_CPY | RIG_OP_FROM_VFO | RIG_OP_TO_VFO |
RIG_OP_UP | RIG_OP_DOWN | RIG_OP_TUNE | RIG_OP_TOGGLE,
.targetable_vfo = RIG_TARGETABLE_ALL,
.transceive = RIG_TRN_OFF, /* Yaesus have to be polled, sigh */
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{1, 90, RIG_MTYPE_MEM, FT990_MEM_CAP},
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100), MHz(30), FT990_ALL_RX_MODES, -1, -1, FT990_VFO_ALL, FT990_ANTS}, /* General coverage + ham */
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FT990_OTHER_TX_MODES, W(5), W(100), FT990_VFO_ALL, FT990_ANTS),
FRQ_RNG_HF(1, FT990_AM_TX_MODES, W(2), W(25), FT990_VFO_ALL, FT990_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(100), MHz(30), FT990_ALL_RX_MODES, -1, -1, FT990_VFO_ALL, FT990_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FT990_OTHER_TX_MODES, W(5), W(100), FT990_VFO_ALL, FT990_ANTS),
FRQ_RNG_HF(2, FT990_AM_TX_MODES, W(2), W(25), FT990_VFO_ALL, FT990_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FT990_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FT990_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FT990_AM_RX_MODES, Hz(100)}, /* Normal */
{FT990_AM_RX_MODES, kHz(1)}, /* Fast */
{FT990_FM_RX_MODES, Hz(100)}, /* Normal */
{FT990_FM_RX_MODES, kHz(1)}, /* Fast */
{FT990_RTTY_RX_MODES, Hz(10)}, /* Normal */
{FT990_RTTY_RX_MODES, Hz(100)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{RIG_MODE_SSB, RIG_FLT_ANY}, /* Enable all filters for SSB */
{RIG_MODE_CW, RIG_FLT_ANY}, /* Enable all filters for CW */
{RIG_MODE_RTTY, RIG_FLT_ANY}, /* Enable all filters for RTTY */
{RIG_MODE_RTTYR, RIG_FLT_ANY}, /* Enable all filters for Reverse RTTY */
{RIG_MODE_PKTLSB, RIG_FLT_ANY}, /* Enable all filters for Packet Radio LSB */
{RIG_MODE_AM, kHz(6)}, /* normal AM filter */
{RIG_MODE_AM, kHz(2.4)}, /* narrow AM filter */
{RIG_MODE_FM, kHz(8)}, /* FM standard filter */
{RIG_MODE_PKTFM, kHz(8)}, /* FM standard filter for Packet Radio FM */
RIG_FLT_END,
},
.priv = NULL, /* private data FIXME: */
.rig_init = ft990v12_init,
.rig_cleanup = ft990v12_cleanup,
.rig_open = ft990v12_open, /* port opened */
.rig_close = ft990v12_close, /* port closed */
.set_freq = ft990v12_set_freq,
.get_freq = ft990v12_get_freq,
.set_mode = ft990v12_set_mode,
.get_mode = ft990v12_get_mode,
.set_vfo = ft990v12_set_vfo,
.get_vfo = ft990v12_get_vfo,
.set_ptt = ft990v12_set_ptt,
.get_ptt = ft990v12_get_ptt,
.set_rptr_shift = ft990v12_set_rptr_shift,
.get_rptr_shift = ft990v12_get_rptr_shift,
.set_rptr_offs = ft990v12_set_rptr_offs,
.set_split_vfo = ft990v12_set_split_vfo,
.get_split_vfo = ft990v12_get_split_vfo,
.set_rit = ft990v12_set_rit,
.get_rit = ft990v12_get_rit,
.set_xit = ft990v12_set_xit,
.get_xit = ft990v12_get_xit,
.set_func = ft990v12_set_func,
.get_func = ft990v12_get_func,
.set_parm = ft990v12_set_parm,
.get_level = ft990v12_get_level,
.set_mem = ft990v12_set_mem,
.get_mem = ft990v12_get_mem,
.vfo_op = ft990v12_vfo_op,
.set_channel = ft990v12_set_channel,
.get_channel = ft990v12_get_channel,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* ************************************
*
* Hamlib API functions
*
* ************************************
*/
/*
* rig_init
*/
int ft990v12_init(RIG *rig)
{
struct ft990v12_priv_data *priv;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig->state.priv = (struct ft990v12_priv_data *) calloc(1,
sizeof(struct ft990v12_priv_data));
if (!rig->state.priv)
{
return -RIG_ENOMEM;
}
priv = rig->state.priv;
// Set default pacing value
priv->pacing = FT990_PACING_DEFAULT_VALUE;
// Set operating vfo mode to current VFO
priv->current_vfo = RIG_VFO_MAIN;
return RIG_OK;
}
/*
* rig_cleanup
*/
int ft990v12_cleanup(RIG *rig)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
if (rig->state.priv)
{
free(rig->state.priv);
}
rig->state.priv = NULL;
return RIG_OK;
}
/*
* rig_open
*/
int ft990v12_open(RIG *rig)
{
struct rig_state *rig_s;
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft990v12_priv_data *)rig->state.priv;
rig_s = &rig->state;
rig_debug(RIG_DEBUG_TRACE, "%s: write_delay = %i msec\n",
__func__, rig_s->rigport.write_delay);
rig_debug(RIG_DEBUG_TRACE, "%s: post_write_delay = %i msec\n",
__func__, rig_s->rigport.post_write_delay);
rig_debug(RIG_DEBUG_TRACE,
"%s: read pacing = %i\n", __func__, priv->pacing);
err = ft990v12_send_dynamic_cmd(rig, FT990_NATIVE_PACING, priv->pacing, 0, 0,
0);
if (err != RIG_OK)
{
return err;
}
// Get current rig settings and status
// err = ft990v12_get_update_data(rig, FT990_NATIVE_UPDATE_OP_DATA, 0);
// M0EZP read flags instead of update
err = ft990v12_get_update_data(rig, FT990_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_close
*/
int ft990v12_close(RIG *rig)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_set_freq*
*
* Set frequency for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* freq | input | 100000 - 30000000
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
struct ft990v12_priv_data *priv;
int err;
vfo_t vfo_save;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed freq = %"PRIfreq" Hz\n", __func__, freq);
// Frequency range sanity check
if (freq < 100000 || freq > 30000000)
{
return -RIG_EINVAL;
}
priv = (struct ft990v12_priv_data *)rig->state.priv;
vfo_save = priv->current_vfo;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != vfo_save)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
err = ft990v12_send_dial_freq(rig, FT990_NATIVE_FREQ_SET, freq);
if (err != RIG_OK)
{
return err;
}
if (vfo != vfo_save)
{
err = ft990v12_set_vfo(rig, vfo_save);
if (err != RIG_OK)
{
return err;
}
}
return RIG_OK;
}
/*
* rig_get_freq*
*
* Get frequency for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* freq * | output | 100000 - 30000000
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
struct ft990v12_priv_data *priv;
unsigned char *p;
freq_t f;
int err;
int ci;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: ft990uni_get_freq_state = 0x%02x\n", __func__,
ft990uni_get_freq_state);
if (ft990uni_get_freq_state < 2)
{
// M0EZP: UNI first call needs UPDATE_ALL
ft990uni_get_freq_state = ft990uni_get_freq_state + 1;
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft990v12_priv_data *)rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
p = priv->update_data.vfoa.basefreq;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = priv->update_data.vfob.basefreq;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
p = priv->update_data.current_front.basefreq;
ci = FT990_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
ci = FT990_NATIVE_UPDATE_ALL_DATA; /* M0EZP: inserted to override CI */
err = ft990v12_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
/* big endian integer */
f = ((((p[0] << 8) + p[1]) << 8) + p[2]) * 10;
rig_debug(RIG_DEBUG_TRACE, "%s: p0=0x%02x p1=0x%02x p2=0x%02x\n",
__func__, p[0], p[1], p[2]);
rig_debug(RIG_DEBUG_TRACE,
"%s: freq = %"PRIfreq" Hz for vfo 0x%02x\n", __func__, f, vfo);
// Frequency sanity check
if (f < 100000 || f > 30000000)
{
return -RIG_EINVAL;
}
*freq = f;
return RIG_OK;
}
else
{
// M0EZP: Uni use cache
// *freq = vfo == RIG_VFO_A ? rig->state.cache.freqMainA : rig->state.cache.freqMainB;
return (RIG_OK);
}
}
/*
* rig_set_ptt*
*
* Control PTT for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* ptt | input | 0 = off, 1 = off
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
{
struct ft990v12_priv_data *priv;
int err;
unsigned char ci;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed ptt = 0x%02x\n", __func__, ptt);
priv = (struct ft990v12_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
switch (ptt)
{
case RIG_PTT_ON:
ci = FT990_NATIVE_PTT_ON;
break;
case RIG_PTT_OFF:
ci = FT990_NATIVE_PTT_OFF;
break;
default:
return -RIG_EINVAL;
}
err = ft990v12_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_ptt*
*
* Get PTT line status
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* ptt * | output | 0 = off, 1 = on
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the PTT status
* is independent from the VFO selection.
*/
int ft990v12_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *) rig->state.priv;
err = ft990v12_get_update_data(rig, FT990_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
*ptt = ((priv->update_data.flag1 & FT990_SF_XMIT) != 0);
rig_debug(RIG_DEBUG_TRACE, "%s: set ptt = 0x%02x\n", __func__, *ptt);
return RIG_OK;
}
/*
* rig_set_rptr_shift*
*
* Set repeater shift for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* freq | input | - = negative repeater shift,
* | | + = positive repeater shift,
* | | any other character = simplex (is this a bug?)
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
* Repeater shift can only be set when in FM mode.
*/
int ft990v12_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t rptr_shift)
{
struct ft990v12_priv_data *priv;
unsigned char ci;
char *p;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed rptr_shift = 0x%02x\n", __func__,
rptr_shift);
priv = (struct ft990v12_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
// Construct update query
switch (vfo)
{
case RIG_VFO_A:
p = (char *) &priv->update_data.vfoa.mode;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = (char *) &priv->update_data.vfob.mode;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_MEM:
p = (char *) &priv->update_data.current_front.mode;
ci = FT990_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO
err = ft990v12_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set mode = 0x%02x\n", __func__, *p);
// Shift mode settings are only valid in FM mode
if ((*p & FT990_MODE_FM) == 0)
{
return -RIG_EINVAL;
}
// Construct repeater shift command
switch (rptr_shift)
{
case RIG_RPT_SHIFT_NONE:
ci = FT990_NATIVE_RPTR_SHIFT_NONE;
break;
case RIG_RPT_SHIFT_MINUS:
ci = FT990_NATIVE_RPTR_SHIFT_MINUS;
break;
case RIG_RPT_SHIFT_PLUS:
ci = FT990_NATIVE_RPTR_SHIFT_PLUS;
break;
default:
return -RIG_EINVAL;
}
// Set repeater shift
err = ft990v12_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_rptr_shift*
*
* Get repeater shift setting for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* shift * | output | 0 = simplex
* | | 1 = negative repeater shift
* | | 2 = positive repeater shift
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
* Repeater shift can only be obtained when in FM mode.
*/
int ft990v12_get_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t *rptr_shift)
{
struct ft990v12_priv_data *priv;
ft990v12_op_data_t *p;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
// Construct update query
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
p = &priv->update_data.vfoa;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = &priv->update_data.vfob;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
p = &priv->update_data.current_front;
ci = FT990_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO
err = ft990v12_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set mode = 0x%02x\n", __func__, p->mode);
// Shift mode settings are only valid in FM mode
if (p->mode & FT990_MODE_FM)
{
*rptr_shift = (p->status & FT990_RPT_MASK) >> 2;
}
else
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set rptr shift = 0x%02x\n", __func__,
*rptr_shift);
return RIG_OK;
}
/*
* rig_set_rptr_offs*
*
* Set repeater frequency offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* off | input | 0 - 199999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* repeater frequency offset is independent from the VFO selection.
*/
int ft990v12_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs)
{
unsigned char bcd[(int) FT990_BCD_RPTR_OFFSET / 2];
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed offs = %d\n", __func__, (int)offs);
// Check for valid offset
if (offs < 0 || offs > 199999)
{
return -RIG_EINVAL;
}
to_bcd(bcd, offs / 10, FT990_BCD_RPTR_OFFSET);
rig_debug(RIG_DEBUG_TRACE,
"%s: set bcd[0] = 0x%02x, bcd[1] = 0x%02x, bcd[2] = 0x%02x\n",
__func__, bcd[0], bcd[1], bcd[2]);
err = ft990v12_send_dynamic_cmd(rig, FT990_NATIVE_RPTR_OFFSET, 0,
bcd[2], bcd[1], bcd[0]);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_set_split_vfo*
*
* Set split operation for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* split | input | 0 = off, 1 = on
* tx_vfo | input | currVFO, VFOA, VFOB
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo or tx_vfo will use the currently
* selected VFO obtained from the priv->current_vfo data structure.
* Only VFOA and VFOB are valid assignments for the tx_vfo.
* The tx_vfo is loaded first when assigning MEM to vfo to ensure
* the correct TX VFO is selected by the rig in split mode.
* An error is returned if vfo and tx_vfo are the same.
*/
int ft990v12_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
{
struct ft990v12_priv_data *priv;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed split = 0x%02x\n", __func__, split);
rig_debug(RIG_DEBUG_TRACE, "%s: passed tx_vfo = 0x%02x\n", __func__, tx_vfo);
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: vfo = priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
if (tx_vfo == RIG_VFO_CURR)
{
tx_vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: tx_vfo = priv->current.vfo = 0x%02x\n",
__func__, tx_vfo);
}
// RX VFO and TX VFO cannot be the same, no support for MEM as TX VFO
if (vfo == tx_vfo || tx_vfo == RIG_VFO_MEM)
{
return -RIG_ENTARGET;
}
// Set TX VFO first if RIG_VFO_MEM selected for RX VFO
if (vfo == RIG_VFO_MEM)
{
err = ft990v12_set_vfo(rig, tx_vfo);
if (err != RIG_OK)
{
return err;
}
}
// Set RX VFO
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
switch (split)
{
case RIG_SPLIT_ON:
ci = FT990_NATIVE_SPLIT_ON;
break;
case RIG_SPLIT_OFF:
ci = FT990_NATIVE_SPLIT_OFF;
break;
default:
return -RIG_EINVAL;
}
err = ft990v12_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_split_vfo*
*
* Get split mode status for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* split * | output | 0 = on, 1 = off
* tx_vfo * | output | VFOA, VFOB
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored in order to
* preserve the current split vfo system settings.
*/
int ft990v12_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *) rig->state.priv;
// Read status flags
err = ft990v12_get_update_data(rig, FT990_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
// Get split mode status
*split = priv->update_data.flag1 & FT990_SF_SPLIT;
rig_debug(RIG_DEBUG_TRACE, "%s: set split = 0x%02x\n", __func__,
priv->update_data.flag1);
rig_debug(RIG_DEBUG_TRACE, "%s: set split = 0x%02x\n", __func__, *split);
// Get transmit vfo
switch (priv->current_vfo)
{
case RIG_VFO_A:
*tx_vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
*tx_vfo = RIG_VFO_A;
break;
case RIG_VFO_MEM:
if (priv->update_data.flag1 & FT990_SF_VFOB)
{
*tx_vfo = RIG_VFO_B;
}
else
{
*tx_vfo = RIG_VFO_A;
}
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set tx_vfo = 0x%02x\n", __func__, *tx_vfo);
return RIG_OK;
}
/*
* rig_set_rit*
*
* Set receiver clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* rit | input | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*
* The following conditions are checked:
*
* rit = 0 && xit enabled -> disable rit
* rit = 0 && xit disabled -> disable rit and set frequency = 0
*/
int ft990v12_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed rit = %d\n", __func__, (int)rit);
// Check for valid clarifier offset frequency
if (rit < -9999 || rit > 9999)
{
return -RIG_EINVAL;
}
priv = (struct ft990v12_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
// If rit = 0 disable RX clarifier
if (rit == 0)
{
err = ft990v12_get_update_data(rig, FT990_NATIVE_UPDATE_OP_DATA, 0);
if (err != RIG_OK)
{
return err;
}
if ((priv->update_data.current_front.status & FT990_CLAR_TX_EN) == 0)
{
err = ft990v12_send_static_cmd(rig, FT990_NATIVE_CLEAR_CLARIFIER_OFFSET);
if (err != RIG_OK)
{
return err;
}
}
// Disable RX Clarifier
err = ft990v12_send_static_cmd(rig, FT990_NATIVE_RX_CLARIFIER_OFF);
if (err != RIG_OK)
{
return err;
}
}
else
{
// Enable RX Clarifier
err = ft990v12_send_static_cmd(rig, FT990_NATIVE_RX_CLARIFIER_ON);
if (err != RIG_OK)
{
return err;
}
// Set RX clarifier offset
err = ft990v12_send_rit_freq(rig, FT990_NATIVE_CLARIFIER_OPS, rit);
if (err != RIG_OK)
{
return err;
}
}
return RIG_OK;
}
/*
* rig_get_rit*
*
* Get receiver clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* rit * | output | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit)
{
struct ft990v12_priv_data *priv;
unsigned char ci;
ft990v12_op_data_t *p;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo = 0x%02x\n",
__func__, vfo);
}
// Construct update query
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
ci = FT990_NATIVE_UPDATE_VFO_DATA;
p = (ft990v12_op_data_t *) &priv->update_data.vfoa;
break;
case RIG_VFO_B:
ci = FT990_NATIVE_UPDATE_VFO_DATA;
p = (ft990v12_op_data_t *) &priv->update_data.vfob;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
ci = FT990_NATIVE_UPDATE_OP_DATA;
p = (ft990v12_op_data_t *) &priv->update_data.current_front;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO/MEM
err = ft990v12_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
// Clarifier offset is only returned when enabled
if (p->status & FT990_CLAR_RX_EN)
{
*rit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
else
{
*rit = 0;
}
rig_debug(RIG_DEBUG_TRACE, "%s: rit freq = %li Hz\n", __func__, *rit);
return RIG_OK;
}
/*
* rig_set_xit*
*
* Set transmitter clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* xit | input | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*
* The following conditions are checked:
*
* xit = 0 && rit enabled -> disable xit
* xit = 0 && rit disabled -> disable xit and set frequency = 0
*/
int ft990v12_set_xit(RIG *rig, vfo_t vfo, shortfreq_t xit)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed rit = %d\n", __func__, (int)xit);
if (xit < -9999 || xit > 9999)
{
return -RIG_EINVAL;
}
priv = (struct ft990v12_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
// Disable TX clarifier and return if xit = 0
if (xit == 0)
{
err = ft990v12_get_update_data(rig, FT990_NATIVE_UPDATE_OP_DATA, 0);
if (err != RIG_OK)
{
return err;
}
if ((priv->update_data.current_front.status & FT990_CLAR_RX_EN) == 0)
{
err = ft990v12_send_static_cmd(rig, FT990_NATIVE_CLEAR_CLARIFIER_OFFSET);
if (err != RIG_OK)
{
return err;
}
}
err = ft990v12_send_static_cmd(rig, FT990_NATIVE_TX_CLARIFIER_OFF);
if (err != RIG_OK)
{
return err;
}
}
else
{
// Enable TX Clarifier
err = ft990v12_send_static_cmd(rig, FT990_NATIVE_TX_CLARIFIER_ON);
if (err != RIG_OK)
{
return err;
}
// Set TX clarifier offset
err = ft990v12_send_rit_freq(rig, FT990_NATIVE_CLARIFIER_OPS, xit);
if (err != RIG_OK)
{
return err;
}
}
return RIG_OK;
}
/*
* rig_get_xit*
*
* Get transmitter clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* xit * | output | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_get_xit(RIG *rig, vfo_t vfo, shortfreq_t *xit)
{
struct ft990v12_priv_data *priv;
unsigned char ci;
ft990v12_op_data_t *p;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo = 0x%02x\n",
__func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
ci = FT990_NATIVE_UPDATE_VFO_DATA;
p = (ft990v12_op_data_t *) &priv->update_data.vfoa;
break;
case RIG_VFO_B:
ci = FT990_NATIVE_UPDATE_VFO_DATA;
p = (ft990v12_op_data_t *) &priv->update_data.vfob;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
ci = FT990_NATIVE_UPDATE_OP_DATA;
p = (ft990v12_op_data_t *) &priv->update_data.current_front;
break;
default:
return -RIG_EINVAL;
}
err = ft990v12_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
// Clarifier offset is only returned when enabled
if (p->status & FT990_CLAR_TX_EN)
{
*xit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
else
{
*xit = 0;
}
rig_debug(RIG_DEBUG_TRACE, "%s: read freq = %li Hz\n", __func__, *xit);
return RIG_OK;
}
/*
* rig_set_func*
*
* Set rig function
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* func | input | LOCK, TUNER
* status | input | 0 = off, 1 = off
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* the status of rig functions are vfo independent.
*/
int ft990v12_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed func = %s\n", __func__,
rig_strfunc(func));
rig_debug(RIG_DEBUG_TRACE, "%s: passed status = %d\n", __func__, status);
switch (func)
{
case RIG_FUNC_LOCK:
if (status)
{
ci = FT990_NATIVE_LOCK_ON;
}
else
{
ci = FT990_NATIVE_LOCK_OFF;
}
break;
case RIG_FUNC_TUNER:
if (status)
{
ci = FT990_NATIVE_TUNER_ON;
}
else
{
ci = FT990_NATIVE_TUNER_OFF;
}
break;
default:
return -RIG_EINVAL;
}
err = ft990v12_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_func*
*
* Get status of a rig function
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* func | input | LOCK, TUNER, MON
* status * | output | 0 = off, 1 = on
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* the status of rig function are vfo independent.
*/
int ft990v12_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed func = %s\n", __func__,
rig_strfunc(func));
priv = (struct ft990v12_priv_data *)rig->state.priv;
err = ft990v12_get_update_data(rig, FT990_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
switch (func)
{
case RIG_FUNC_LOCK:
*status = ((priv->update_data.flag2 & FT990_SF_LOCKED) != 0);
break;
case RIG_FUNC_TUNER:
*status = ((priv->update_data.flag3 & FT990_SF_TUNER_ON) != 0);
break;
case RIG_FUNC_MON:
*status = ((priv->update_data.flag3 & FT990_SF_XMIT_MON) != 0);
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_set_parm*
*
* Set rig parameters that are not VFO specific
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* parm | input | BACKLIGHT
* val | input | 0.0..1.0
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments:
*/
int ft990v12_set_parm(RIG *rig, setting_t parm, value_t val)
{
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed parm = %s\n", __func__,
rig_strparm(parm));
rig_debug(RIG_DEBUG_TRACE, "%s: passed val = %f\n", __func__, val.f);
switch (parm)
{
case RIG_PARM_BACKLIGHT:
err = ft990v12_send_dynamic_cmd(rig, FT990_NATIVE_DIM_LEVEL,
(unsigned char)(0x0d * val.f), 0, 0, 0);
break;
default:
return -RIG_EINVAL;
}
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_set_mode*
*
* Set operating mode and passband for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* mode | input | USB, LSB, CW, AM, FM, RTTY, RTTYR, PKTLSB, PKTFM
* width | input | 2400, 2000, 500, 250 (USB)
* | | 2400, 2000, 500, 250 (LSB)
* | | 2400, 2000, 500, 250 (CW)
* | | 2400, 2000, 500, 250 (RTTY)
* | | 2400, 2000, 500, 250 (RTTYR)
* | | 2400, 2000, 500, 250 (PKTLSB)
* | | 6000, 2400 (AM)
* | | 8000 (FM)
* | | 8000 (PKTFM)
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
struct ft990v12_priv_data *priv;
unsigned char bw;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed mode = %s\n", __func__,
rig_strrmode(mode));
rig_debug(RIG_DEBUG_TRACE, "%s: passed width = %d Hz\n", __func__, (int)width);
priv = (struct ft990v12_priv_data *)rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
switch (mode)
{
case RIG_MODE_AM:
if (width == rig_passband_narrow(rig, mode))
{
ci = FT990_NATIVE_MODE_SET_AM_N;
}
else if (width == rig_passband_normal(rig, mode))
{
ci = FT990_NATIVE_MODE_SET_AM_W;
}
else
{
return -RIG_EINVAL;
}
break;
case RIG_MODE_CW:
ci = FT990_NATIVE_MODE_SET_CW_W;
break;
case RIG_MODE_USB:
ci = FT990_NATIVE_MODE_SET_USB;
break;
case RIG_MODE_LSB:
ci = FT990_NATIVE_MODE_SET_LSB;
break;
case RIG_MODE_RTTY:
ci = FT990_NATIVE_MODE_SET_RTTY_LSB;
break;
case RIG_MODE_RTTYR:
ci = FT990_NATIVE_MODE_SET_RTTY_USB;
break;
case RIG_MODE_FM:
ci = FT990_NATIVE_MODE_SET_FM;
break;
case RIG_MODE_PKTLSB:
ci = FT990_NATIVE_MODE_SET_PKT_LSB;
break;
case RIG_MODE_PKTFM:
ci = FT990_NATIVE_MODE_SET_PKT_FM;
break;
default:
return -RIG_EINVAL;
}
err = ft990v12_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
if (ci == FT990_NATIVE_MODE_SET_AM_N ||
ci == FT990_NATIVE_MODE_SET_AM_W ||
ci == FT990_NATIVE_MODE_SET_FM ||
ci == FT990_NATIVE_MODE_SET_PKT_FM)
{
return RIG_OK;
}
if (width <= 250) { bw = FT990_BW_F250; }
else if (width <= 500) { bw = FT990_BW_F500; }
else if (width <= 2000) { bw = FT990_BW_F2000; }
else { bw = FT990_BW_F2400; }
rig_debug(RIG_DEBUG_TRACE, "%s: set bw = 0x%02x\n", __func__, bw);
err = ft990v12_send_dynamic_cmd(rig, FT990_NATIVE_BANDWIDTH, bw, 0, 0, 0);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_mode*
*
* Get operating mode and passband for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* mode | input | USB, LSB, CW, AM, FM, RTTY, RTTYR, PKTLSB, PKTFM
* width * | output | 2400, 2000, 500, 250 (USB)
* | | 2400, 2000, 500, 250 (LSB)
* | | 2400, 2000, 500, 250 (CW)
* | | 2400, 2000, 500, 250 (RTTY)
* | | 2400, 2000, 500, 250 (RTTYR)
* | | 2400, 2000, 500, 250 (PKTLSB)
* | | 6000, 2400 (AM)
* | | 8000 (FM)
* | | 8000 (PKTFM)
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
struct ft990v12_priv_data *priv;
unsigned char *p;
unsigned char *fl;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *)rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE,
"%s: priv->current_vfo = 0x%02x\n", __func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
p = &priv->update_data.vfoa.mode;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
fl = &priv->update_data.vfoa.filter;
break;
case RIG_VFO_B:
p = &priv->update_data.vfob.mode;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
fl = &priv->update_data.vfob.filter;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
p = &priv->update_data.current_front.mode;
ci = FT990_NATIVE_UPDATE_OP_DATA;
fl = &priv->update_data.current_front.filter;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO
err = ft990v12_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: fl = 0x%02x\n", __func__, *fl);
rig_debug(RIG_DEBUG_TRACE, "%s: current mode = 0x%02x\n", __func__, *p);
switch (*p)
{
case FT990_MODE_LSB:
*mode = RIG_MODE_LSB;
break;
case FT990_MODE_USB:
*mode = RIG_MODE_USB;
break;
case FT990_MODE_CW:
*mode = RIG_MODE_CW;
break;
case FT990_MODE_AM:
*mode = RIG_MODE_AM;
break;
case FT990_MODE_FM:
*mode = RIG_MODE_FM;
break;
case FT990_MODE_RTTY:
if (*fl & FT990_BW_FMPKTRTTY)
{
*mode = RIG_MODE_RTTYR;
}
else
{
*mode = RIG_MODE_RTTY;
}
break;
case FT990_MODE_PKT:
if (*fl & FT990_BW_FMPKTRTTY)
{
*mode = RIG_MODE_PKTFM;
}
else
{
*mode = RIG_MODE_PKTLSB;
}
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: get mode = %s\n", __func__,
rig_strrmode(*mode));
// The FT990 firmware appears to have a bug since the
// AM bandwidth for 2400Hz and 6000Hz are interchanged.
switch (*fl & (~FT990_BW_FMPKTRTTY))
{
case FT990_BW_F2400:
if (*mode == RIG_MODE_FM || *mode == RIG_MODE_PKTFM)
{
*width = 8000;
}
else if (*mode == RIG_MODE_AM) // <- FT990 firmware bug?
{
*width = 6000;
}
else
{
*width = 2400;
}
break;
case FT990_BW_F2000:
*width = 2000;
break;
case FT990_BW_F500:
*width = 500;
break;
case FT990_BW_F250:
*width = 250;
break;
case FT990_BW_F6000:
*width = 2400; // <- FT990 firmware bug?
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: get width = %li Hz\n", __func__, *width);
return RIG_OK;
}
/*
* rig_set_vfo*
*
* Set operational VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_set_vfo(RIG *rig, vfo_t vfo)
{
struct ft990v12_priv_data *priv;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *)rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE,
"%s: priv->current_vfo = 0x%02x\n", __func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
ci = FT990_NATIVE_VFO_A;
break;
case RIG_VFO_B:
ci = FT990_NATIVE_VFO_B;
break;
case RIG_VFO_MEM:
ci = FT990_NATIVE_RECALL_MEM;
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set ci = %i\n", __func__, ci);
if (vfo == RIG_VFO_MEM)
{
err = ft990v12_send_dynamic_cmd(rig, ci,
priv->update_data.channelnumber + 1, 0, 0, 0);
rig_debug(RIG_DEBUG_TRACE, "%s: set mem channel = 0x%02x\n",
__func__, priv->update_data.channelnumber + 1);
}
else
{
err = ft990v12_send_static_cmd(rig, ci);
}
if (err != RIG_OK)
{
return err;
}
priv->current_vfo = vfo;
return RIG_OK;
}
/*
* rig_get_vfo*
*
* Get operational VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo * | output | VFOA, VFOB, MEM
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
* The result is stored in the priv->current_vfo data structure
* for later retrieval.
*/
int ft990v12_get_vfo(RIG *rig, vfo_t *vfo)
{
struct ft990v12_priv_data *priv;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft990v12_priv_data *)rig->state.priv;
/* Get flags for VFO status
err = ft990v12_get_update_data(rig, FT990_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
*/
if (priv->update_data.flag2 & FT990_SF_MEM ||
priv->update_data.flag2 & FT990_SF_MTUNE)
{
priv->current_vfo = RIG_VFO_MEM;
}
else if (priv->update_data.flag1 & FT990_SF_VFOB)
{
priv->current_vfo = RIG_VFO_B;
}
else
{
priv->current_vfo = RIG_VFO_A;
}
rig_debug(RIG_DEBUG_TRACE,
"%s: vfo status_1 = 0x%02x\n", __func__,
priv->update_data.flag1);
rig_debug(RIG_DEBUG_TRACE,
"%s: vfo status_2 = 0x%02x\n", __func__,
priv->update_data.flag2);
rig_debug(RIG_DEBUG_TRACE,
"%s: stat_vfo = 0x%02x\n", __func__, priv->current_vfo);
*vfo = priv->current_vfo;
return RIG_OK;
}
/*
* rig_get_level
*
* This function will read the meter level.The data
* is processed depending upon selection of the level
* parameter. The following are the currently supported
* levels and returned value range:
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* level | input | STRENGTH, ALC, COMP, RFPOWER, SWR
* value * | output | see table below
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* ----------------------------------------------------------
* level | Description | Returned Value | Units |
* ----------------------------------------------------------
* STRENGTH | Signal Strength | -54 .. +60 | db |
* COMP | Compression | 0.0 .. 1.0 | %/100 |
* RFPOWER | RF Power Output | 0.0 .. 1.0 | %/100 |
* SWR | Standing Wave Ratio | 0.0 .. 1.0 | %/100 |
* ----------------------------------------------------------
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *value)
{
struct ft990v12_priv_data *priv;
unsigned char mdata[YAESU_CMD_LENGTH];
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed level %s\n", __func__,
rig_strlevel(level));
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
err = ft990v12_send_static_cmd(rig, FT990_NATIVE_READ_METER);
if (err != RIG_OK)
{
return err;
}
err = read_block(&rig->state.rigport, mdata, FT990_READ_METER_LENGTH);
if (err < 0)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: meter data %d\n", __func__, mdata[0]);
switch (level)
{
case RIG_LEVEL_STRENGTH:
value->i = mdata[0] / 2.246 - 54;
rig_debug(RIG_DEBUG_TRACE, "%s: meter level %d\n", __func__, value->i);
break;
case RIG_LEVEL_ALC:
case RIG_LEVEL_COMP:
case RIG_LEVEL_RFPOWER:
case RIG_LEVEL_SWR:
value->f = (float) mdata[0] / 255;
rig_debug(RIG_DEBUG_TRACE, "%s: meter level %f\n", __func__, value->f);
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_vfo_op*
*
* Perform vfo operations
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | VFOA, VFOB, MEM
* op | input | CPY = copy from VFO to VFO
* | | FROM_VFO = copy from VFO to MEM
* | | TO_VFO = copy from MEM to VFO
* | | UP = step dial frequency up
* | | DOWN = step dial frequency down
* | | TUNE = start antenna tuner
* | | TOGGLE = toggle between VFOA and VFOB
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
int ft990v12_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
{
struct ft990v12_priv_data *priv;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed op %s\n", __func__, rig_strvfop(op));
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft990v12_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
switch (op)
{
case RIG_OP_CPY:
ci = FT990_NATIVE_VFO_TO_VFO;
break;
case RIG_OP_FROM_VFO:
ci = FT990_NATIVE_VFO_TO_MEM;
break;
case RIG_OP_TO_VFO:
ci = FT990_NATIVE_MEM_TO_VFO;
break;
case RIG_OP_UP:
ci = FT990_NATIVE_OP_FREQ_STEP_UP;
break;
case RIG_OP_DOWN:
ci = FT990_NATIVE_OP_FREQ_STEP_DOWN;
break;
case RIG_OP_TUNE:
ci = FT990_NATIVE_TUNER_START;
break;
case RIG_OP_TOGGLE:
switch (vfo)
{
case RIG_VFO_A:
ci = FT990_NATIVE_VFO_B;
vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
ci = FT990_NATIVE_VFO_A;
vfo = RIG_VFO_A;
break;
default:
return -RIG_EINVAL;
}
break;
default:
return -RIG_EINVAL;
}
if (op == RIG_OP_TO_VFO || op == RIG_OP_FROM_VFO)
err = ft990v12_send_dynamic_cmd(rig, ci,
priv->update_data.channelnumber + 1, 0, 0, 0);
else
{
err = ft990v12_send_static_cmd(rig, ci);
}
if (err != RIG_OK)
{
return err;
}
if (op == RIG_OP_TOGGLE)
{
priv->current_vfo = vfo;
}
return RIG_OK;
}
/*
* rig_set_mem*
*
* Set main vfo to selected memory channel number
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* ch | input | 1 - 90
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* the channel selection is vfo independent.
*/
int ft990v12_set_mem(RIG *rig, vfo_t vfo, int ch)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ch = %i\n", __func__, ch);
priv = (struct ft990v12_priv_data *) rig->state.priv;
// Check for valid channel number
if (ch < 1 || ch > 90)
{
return -RIG_EINVAL;
}
// Recall selected memory channel
err = ft990v12_send_dynamic_cmd(rig, FT990_NATIVE_RECALL_MEM, ch, 0, 0, 0);
if (err != RIG_OK)
{
return err;
}
priv->current_vfo = RIG_VFO_MEM;
priv->update_data.channelnumber = ch - 1;
return RIG_OK;
}
/*
* rig_get_mem*
*
* Get memory channel number used by main vfo
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* ch * | output | 1 - 90
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since
* the channel selection is vfo independent.
*/
int ft990v12_get_mem(RIG *rig, vfo_t vfo, int *ch)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo = 0x%02x\n",
__func__, vfo);
}
err = ft990v12_get_update_data(rig, FT990_NATIVE_UPDATE_MEM_CHNL, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: channel number %i\n", __func__,
priv->update_data.channelnumber + 1);
*ch = priv->update_data.channelnumber + 1;
// Check for valid channel number
if (*ch < 1 || *ch > 90)
{
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_set_channel*
*
* Set memory channel parameters and attributes
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* chan * | input | channel attribute data structure
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*/
int ft990v12_set_channel(RIG *rig, vfo_t vfo, const channel_t *chan)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
return -RIG_ENIMPL;
}
/*
* rig_get_channel*
*
* Get memory channel parameters and attributes
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* chan * | input | (chan->vfo) currVFO, VFOA, VFOB, MEM
* | | (chan->channel_num) 0 - 90
* chan * | output | channel attributes data structure
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing a memory channel number of 0 returns information on
* the current channel or channel last in use.
*
* Status for split operation, active rig functions and tuning steps
* are only relevant for currVFO
*/
int ft990v12_get_channel(RIG *rig, vfo_t vfo, channel_t *chan, int read_only)
{
struct ft990v12_priv_data *priv;
ft990v12_op_data_t *p;
char ci;
int err;
channel_t _chan;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed chan->vfo = %s\n",
__func__, rig_strvfo(chan->vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed chan->channel_num = %i\n",
__func__, chan->channel_num);
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (chan->channel_num < 0 || chan->channel_num > 90)
{
return -RIG_EINVAL;
}
/*
* Get a clean slate so we don't have to assign value to
* variables that are not relevant to this equipment
*/
_chan.channel_num = chan->channel_num;
_chan.vfo = chan->vfo;
memset(chan, 0, sizeof(channel_t));
chan->channel_num = _chan.channel_num;
chan->vfo = _chan.vfo;
if (chan->channel_num == 0)
{
switch (chan->vfo)
{
// Current or last selected memory channel
case RIG_VFO_MEM:
err = ft990v12_get_update_data(rig, FT990_NATIVE_UPDATE_MEM_CHNL, 0);
if (err != RIG_OK)
{
return err;
}
chan->channel_num = priv->update_data.channelnumber + 1;
p = (ft990v12_op_data_t *) &priv->update_data.channel[chan->channel_num];
ci = FT990_NATIVE_UPDATE_MEM_CHNL_DATA;
break;
case RIG_VFO_A:
p = (ft990v12_op_data_t *) &priv->update_data.vfoa;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = (ft990v12_op_data_t *) &priv->update_data.vfob;
ci = FT990_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_CURR:
p = (ft990v12_op_data_t *) &priv->update_data.current_front;
ci = FT990_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
}
else
{
p = (ft990v12_op_data_t *) &priv->update_data.channel[chan->channel_num];
ci = FT990_NATIVE_UPDATE_MEM_CHNL_DATA;
chan->vfo = RIG_VFO_MEM;
}
/*
* Get data for selected VFO/MEM
*/
err = ft990v12_get_update_data(rig, ci, chan->channel_num);
if (err != RIG_OK)
{
return err;
}
// Blanked memory, nothing to report
if (p->bpf & FT990_EMPTY_MEM)
{
return RIG_OK;
}
/*
* Get RX frequency
*/
chan->freq = ((((p->basefreq[0] << 8) + p->basefreq[1]) << 8) +
p->basefreq[2]) * 10;
/*
* Get RX operating mode
*/
switch (p->mode)
{
case FT990_MODE_LSB:
chan->mode = RIG_MODE_LSB;
break;
case FT990_MODE_USB:
chan->mode = RIG_MODE_USB;
break;
case FT990_MODE_CW:
chan->mode = RIG_MODE_CW;
break;
case FT990_MODE_AM:
chan->mode = RIG_MODE_AM;
break;
case FT990_MODE_FM:
chan->mode = RIG_MODE_FM;
break;
case FT990_MODE_RTTY:
if (p->filter & FT990_BW_FMPKTRTTY)
{
chan->mode = RIG_MODE_RTTYR;
}
else
{
chan->mode = RIG_MODE_RTTY;
}
break;
case FT990_MODE_PKT:
if (p->filter & FT990_BW_FMPKTRTTY)
{
chan->mode = RIG_MODE_PKTFM;
}
else
{
chan->mode = RIG_MODE_PKTLSB;
}
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: mode = 0x%02x\n", __func__, p->mode);
rig_debug(RIG_DEBUG_TRACE, "%s: filter = 0x%02x\n", __func__, p->filter);
/*
* Get RX bandwidth selection
*
* The FT990 firmware appears to have a bug since the
* AM bandwidth for 2400Hz and 6000Hz are interchanged.
*/
switch (p->filter & (~FT990_BW_FMPKTRTTY))
{
case FT990_BW_F2400:
if (chan->mode == RIG_MODE_FM || chan->mode == RIG_MODE_PKTFM)
{
chan->width = 8000;
}
else if (chan->mode == RIG_MODE_AM) // <- FT990 firmware bug?
{
chan->width = 6000;
}
else
{
chan->width = 2400;
}
break;
case FT990_BW_F2000:
chan->width = 2000;
break;
case FT990_BW_F500:
chan->width = 500;
break;
case FT990_BW_F250:
chan->width = 250;
break;
case FT990_BW_F6000:
chan->width = 2400; // <- FT990 firmware bug?
break;
default:
return -RIG_EINVAL;
}
err = ft990v12_get_update_data(rig, FT990_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set status = %i\n", __func__,
priv->update_data.flag1);
/*
* Status for split operation, active rig functions and tuning steps
* are only relevant for currVFO
*/
if (chan->vfo & RIG_VFO_CURR)
{
chan->split = (priv->update_data.flag1 & FT990_SF_SPLIT);
if (priv->update_data.flag1 & FT990_SF_XMIT_MON)
{
chan->funcs |= RIG_FUNC_MON;
}
if (priv->update_data.flag1 & FT990_SF_TUNER_ON)
{
chan->funcs |= RIG_FUNC_TUNER;
}
if (priv->update_data.flag1 & FT990_SF_FAST)
{
if (chan->mode & (FT990_AM_RX_MODES | FT990_FM_RX_MODES))
{
chan->tuning_step = 1000;
}
else
{
chan->tuning_step = 100;
}
}
else
{
if (chan->mode & (FT990_AM_RX_MODES | FT990_FM_RX_MODES))
{
chan->tuning_step = 100;
}
else
{
chan->tuning_step = 10;
}
}
}
/*
* Get RIT frequencies
*/
if (p->status & FT990_CLAR_RX_EN)
{
chan->rit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
if (chan->split & RIG_SPLIT_ON)
{
// Get data for the transmit VFO
p = (ft990v12_op_data_t *)
&priv->update_data.current_front; /* M0EZP: was current_rear */
/* FT1000D
* if (RIG_MODEL_FT1000D == rig->caps->rig_model)
* p = (ft990v12_op_data_t *) &priv->update_data.vfob;
* chan->tx_freq = ((((p->basefreq[0] << 8) + p->basefreq[1]) << 8) +
* p->basefreq[2]) * 10;
*
* THIS SECTION WAS REMOVED IN DECEMBER 2016. SEE SEPARATE ft1000d.c and .h FILES
*/
/* Get RX operating mode */
switch (p->mode)
{
case FT990_MODE_LSB:
chan->tx_mode = RIG_MODE_LSB;
break;
case FT990_MODE_USB:
chan->tx_mode = RIG_MODE_USB;
break;
case FT990_MODE_CW:
chan->tx_mode = RIG_MODE_CW;
break;
case FT990_MODE_AM:
chan->tx_mode = RIG_MODE_AM;
break;
case FT990_MODE_FM:
chan->tx_mode = RIG_MODE_FM;
break;
case FT990_MODE_RTTY:
if (p->filter & FT990_BW_FMPKTRTTY)
{
chan->tx_mode = RIG_MODE_RTTYR;
}
else
{
chan->tx_mode = RIG_MODE_RTTY;
}
break;
case FT990_MODE_PKT:
if (p->filter & FT990_BW_FMPKTRTTY)
{
chan->tx_mode = RIG_MODE_PKTFM;
}
else
{
chan->tx_mode = RIG_MODE_PKTLSB;
}
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set tx mode = %s\n", __func__,
rig_strrmode(chan->mode));
rig_debug(RIG_DEBUG_TRACE, "%s: tx filter = 0x%02x\n", __func__, p->filter);
/*
* Get RX bandwidth selection
*
* The FT990 firmware appears to have a bug since the
* AM bandwidth for 2400Hz and 6000Hz are interchanged.
*/
switch (p->filter & (~FT990_BW_FMPKTRTTY))
{
case FT990_BW_F2400:
if (chan->tx_mode == RIG_MODE_FM || chan->mode == RIG_MODE_PKTFM)
{
chan->tx_width = 8000;
}
else if (chan->tx_mode == RIG_MODE_AM) // <- FT990 firmware bug?
{
chan->tx_width = 6000;
}
else
{
chan->tx_width = 2400;
}
break;
case FT990_BW_F2000:
chan->tx_width = 2000;
break;
case FT990_BW_F500:
chan->tx_width = 500;
break;
case FT990_BW_F250:
chan->tx_width = 250;
break;
case FT990_BW_F6000:
chan->tx_width = 2400; // <- FT990 firmware bug?
break;
default:
return -RIG_EINVAL;
}
if (priv->update_data.flag1 & FT990_SF_VFOB)
{
if (chan->tx_vfo & (RIG_VFO_A | RIG_VFO_MEM))
{
chan->tx_vfo = RIG_VFO_B;
}
else if (chan->vfo & RIG_VFO_MEM)
{
chan->tx_vfo = RIG_VFO_A;
}
else
{
chan->tx_vfo = RIG_VFO_MEM;
}
}
else
{
if (chan->vfo & RIG_VFO_A)
{
chan->tx_vfo = RIG_VFO_MEM;
}
else
{
chan->tx_vfo = RIG_VFO_A;
}
}
/*
* Get XIT frequencies
*/
if (p->status & FT990_CLAR_TX_EN)
{
chan->xit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
}
else
{
/*
* RX/TX frequency, mode, bandwidth and vfo are identical in simplex mode
*/
chan->tx_freq = chan->freq;
chan->tx_mode = chan->mode;
chan->tx_width = chan->width;
chan->tx_vfo = chan->vfo;
/*
* Get XIT frequencies
*/
if (p->status & FT990_CLAR_TX_EN)
{
chan->xit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
}
rig_debug(RIG_DEBUG_TRACE, "%s: set status = %i\n", __func__, p->status);
/*
* Repeater shift only possible if transmit mode is FM
*/
if (chan->tx_mode & RIG_MODE_FM)
{
chan->rptr_shift = (p->status & FT990_RPT_MASK) >> 2;
}
/*
* Check for skip channel for memory channels
*/
if (chan->vfo & RIG_VFO_MEM)
{
chan->flags |= RIG_CHFLAG_SKIP;
}
if (!read_only)
{
// Set rig to channel values
rig_debug(RIG_DEBUG_ERR,
"%s: please contact hamlib mailing list to implement this\n", __func__);
rig_debug(RIG_DEBUG_ERR,
"%s: need to know if rig updates when channel read or not\n", __func__);
return -RIG_ENIMPL;
}
return RIG_OK;
}
/*
* Private helper function. Retrieves update data from rig.
* using pacing value and buffer indicated in *priv struct.
* Extended to be command agnostic as 990 has several ways to
* get data and several ways to return it.
*
* Need to use this when doing ft990_get_* stuff
*
* Arguments: *rig Valid RIG instance
* ci command index
* rl expected length of returned data in octets
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
int ft990v12_get_update_data(RIG *rig, unsigned char ci, unsigned short ch)
{
struct ft990v12_priv_data *priv;
int n;
int err = -RIG_EINTERNAL;
int rl;
unsigned char temp[5];
unsigned char *p;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE, "%s: passed ch 0x%02x\n", __func__, ch);
if (!rig)
{
return -RIG_EINVAL;
}
n = 0; // K1MMI: Initialise as the only time n will be updated is for the FT990_NATIVE_ALL_DATA AND FT990_READ_FLAGS
priv = (struct ft990v12_priv_data *)rig->state.priv;
switch (ci)
{
case FT990_NATIVE_UPDATE_ALL_DATA:
case FT990_NATIVE_UPDATE_MEM_CHNL:
case FT990_NATIVE_UPDATE_OP_DATA:
case FT990_NATIVE_UPDATE_VFO_DATA:
case FT990_NATIVE_UPDATE_MEM_CHNL_DATA:
if (ft990uni_get_freq_state < 2)
{
//
if (ci == FT990_NATIVE_UPDATE_MEM_CHNL_DATA)
// P4 = 0x01 to 0x5a for channel 1 - 90
{
/* err = ft990v12_send_dynamic_cmd(rig, ci, 4, 0, 0, ch);
M0EZP: dont send command, rely on the assignment from memory below*/
}
else
{
// err = RIG_OK; K1MMI
err = ft990v12_send_static_cmd(rig,
ci); // K1MMI: only send for ALL DATA 1492 bytes or READ FLAGS 5 bytes
}
if (err != RIG_OK)
{
return err;
}
switch (ci)
{
case FT990_NATIVE_UPDATE_ALL_DATA:
rl = FT990_ALL_DATA_LENGTH; // K1MMI: prepare to receive 1492 bytes back
p = (unsigned char *)
&priv->update_data; // K1MMI: This seems like 1492 will be saved here
n = read_block(&rig->state.rigport, p, rl); /* M0EZP: copied here from below */
return RIG_OK;
break;
case FT990_NATIVE_UPDATE_MEM_CHNL:
// we already have the channelnumber in the previously saved 1492 bytes
p = (unsigned char *) &priv->update_data.channelnumber;
rl = FT990_MEM_CHNL_LENGTH; // 1
break;
case FT990_NATIVE_UPDATE_OP_DATA:
// we already have the current OP and VFOA in the 1492 bytes
p = (unsigned char *) &priv->update_data.current_front;
rl = FT990_OP_DATA_LENGTH; // 32
break;
case FT990_NATIVE_UPDATE_VFO_DATA:
// we already have the VFOA and VFOB in the 1492 bytes
p = (unsigned char *) &priv->update_data.vfoa;
rl = FT990_VFO_DATA_LENGTH; // 32
break;
case FT990_NATIVE_UPDATE_MEM_CHNL_DATA:
// we already have the 16 structure for the memory channel number
p = (unsigned char *) &priv->update_data.channel[ch];
rl = FT990_MEM_CHNL_DATA_LENGTH; // 16
break;
default:
// M0EZP: shouldn't be here!
rig_debug(RIG_DEBUG_TRACE, "%s: Default clause ci 0x%02x\n", __func__,
ci); // M0EZP
return -RIG_EINVAL;
}
ft990uni_get_freq_state = ft990uni_get_freq_state + 1;
if (n < 0)
{
return n; /* die returning read_block error */
}
rig_debug(RIG_DEBUG_TRACE, "%s: read %i bytes\n", __func__, n);
memcpy(&priv->update_data, p, FT990_ALL_DATA_LENGTH);
return RIG_OK;
}
else
{
return RIG_OK;
}
case FT990_NATIVE_READ_FLAGS:
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci 0x%02x\n", __func__, ci);
err = ft990v12_send_static_cmd(rig,
ci); // K1MMI: only send for ALL DATA 1492 bytes
if (err != RIG_OK)
{
return err;
}
p = (unsigned char *)&priv->update_data;
rl = FT990_STATUS_FLAGS_LENGTH; // 5
n = read_block(&rig->state.rigport, (unsigned char *)&temp,
rl); /* M0EZP: copied here from below */
if (n < 0)
{
return n; /* die returning read_block error */
}
rig_debug(RIG_DEBUG_TRACE, "%s: read %i bytes\n", __func__, n);
memcpy(&priv->update_data, p,
FT990_STATUS_FLAGS_LENGTH - 2); /* just overwrite first 3 bytes */
return RIG_OK;
break;
default:
// M0EZP: shouldn't be here!
rig_debug(RIG_DEBUG_TRACE, "%s: Default clause ci 0x%02x\n", __func__,
ci); // M0EZP
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* Private helper function to send a complete command sequence.
*
* TODO: place variant of this in yaesu.c
*
* Arguments: *rig Valid RIG instance
* ci Command index of the ncmd table
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
int ft990v12_send_static_cmd(RIG *rig, unsigned char ci)
{
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
if (!ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE,
"%s: Attempt to send incomplete sequence\n", __func__);
return -RIG_EINVAL;
}
err = write_block(&rig->state.rigport, ncmd[ci].nseq, YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* Private helper function to build and then send a complete command
* sequence.
*
* TODO: place variant of this in yaesu.c
*
* Arguments: *rig Valid RIG instance
* ci Command index of the ncmd table
* p1-p4 Command parameters
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
int ft990v12_send_dynamic_cmd(RIG *rig, unsigned char ci,
unsigned char p1, unsigned char p2,
unsigned char p3, unsigned char p4)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci = 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE,
"%s: passed p1 = 0x%02x, p2 = 0x%02x, p3 = 0x%02x, p4 = 0x%02x,\n",
__func__, p1, p2, p3, p4);
priv = (struct ft990v12_priv_data *)rig->state.priv;
if (ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE,
"%s: Attempt to modify complete sequence\n", __func__);
return -RIG_EINVAL;
}
memcpy(&priv->p_cmd, &ncmd[ci].nseq, YAESU_CMD_LENGTH);
priv->p_cmd[3] = p1;
priv->p_cmd[2] = p2;
priv->p_cmd[1] = p3;
priv->p_cmd[0] = p4;
err = write_block(&rig->state.rigport, (unsigned char *) &priv->p_cmd,
YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* Private helper function to build and send a complete command to
* change the display frequency.
*
* TODO: place variant of this in yaesu.c
*
* Arguments: *rig Valid RIG instance
* ci Command index of the ncmd table
* freq freq_t frequency value
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
int ft990v12_send_dial_freq(RIG *rig, unsigned char ci, freq_t freq)
{
struct ft990v12_priv_data *priv;
int err;
// cppcheck-suppress *
char *fmt = "%s: requested freq after conversion = %"PRIll" Hz\n";
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci = 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE, "%s: passed freq = %"PRIfreq" Hz\n", __func__, freq);
priv = (struct ft990v12_priv_data *)rig->state.priv;
if (ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE,
"%s: Attempt to modify complete sequence\n", __func__);
return -RIG_EINVAL;
}
/* Copy native cmd freq_set to private cmd storage area */
memcpy(&priv->p_cmd, &ncmd[ci].nseq, YAESU_CMD_LENGTH);
/* store bcd format in in p_cmd */
to_bcd(priv->p_cmd, freq / 10, FT990_BCD_DIAL);
rig_debug(RIG_DEBUG_TRACE, fmt, __func__, (int64_t)from_bcd(priv->p_cmd,
FT990_BCD_DIAL) * 10);
err = write_block(&rig->state.rigport, (unsigned char *) &priv->p_cmd,
YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* Private helper function to build and send a complete command to
* change the rit frequency.
*
* Arguments: *rig Valid RIG instance
* ci Command index of the ncmd table
* rit shortfreq_t frequency value
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
int ft990v12_send_rit_freq(RIG *rig, unsigned char ci, shortfreq_t rit)
{
struct ft990v12_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci = 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE, "%s: passed rit = %li Hz\n", __func__, rit);
priv = (struct ft990v12_priv_data *) rig->state.priv;
if (ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE, "%s: Attempt to modify complete sequence\n",
__func__);
return -RIG_EINVAL;
}
// Copy native command into privat command storage area
memcpy(&priv->p_cmd, &ncmd[ci].nseq, YAESU_CMD_LENGTH);
// Reset current clarifier offset
priv->p_cmd[3] = FT990_CLAR_CLEAR;
// Check and set tuning direction - up or down
if (rit < 0)
{
priv->p_cmd[2] = FT990_CLAR_TUNE_DOWN;
}
else
{
priv->p_cmd[2] = FT990_CLAR_TUNE_UP;
}
// Store bcd format into privat command storage area
to_bcd(priv->p_cmd, labs(rit) / 10, FT990_BCD_RIT);
err = write_block(&rig->state.rigport, (unsigned char *) &priv->p_cmd,
YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik