mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/yaesu/ft1000d.c

3961 wiersze
108 KiB
C
Czysty Wina Historia

/*
* hamlib - (C) Stephane Fillod 2002-2009 (fillods at users.sourceforge.net)
*
* ft1000d.c - (C) Berndt Josef Wulf (wulf at ping.net.au)
* (C) 2016 Sean Sharkey (g0oan at icloud.com)
*
* This shared library provides an API for communicating
* via serial interface to an FT-1000D using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Code separated out from ft990.c and ft990.h in December 2016. Added several
* extra functions to expand level of support for the FT1000/D. Sean G0OAN.
*
*/
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "ft1000d.h"
// FT1000D native commands
enum FT1000D_native_cmd_e
{
FT1000D_NATIVE_SPLIT_OFF = 0,
FT1000D_NATIVE_SPLIT_ON,
FT1000D_NATIVE_RECALL_MEM,
FT1000D_NATIVE_VFO_TO_MEM,
FT1000D_NATIVE_LOCK_OFF,
FT1000D_NATIVE_LOCK_ON,
FT1000D_NATIVE_VFO_A,
FT1000D_NATIVE_VFO_B,
FT1000D_NATIVE_MEM_TO_VFO,
FT1000D_NATIVE_VFO_STEP_UP,
FT1000D_NATIVE_VFO_STEP_UP_FAST,
FT1000D_NATIVE_VFO_STEP_DOWN,
FT1000D_NATIVE_VFO_STEP_DOWN_FAST,
FT1000D_NATIVE_RX_CLARIFIER_OFF,
FT1000D_NATIVE_RX_CLARIFIER_ON,
FT1000D_NATIVE_TX_CLARIFIER_OFF,
FT1000D_NATIVE_TX_CLARIFIER_ON,
FT1000D_NATIVE_CLEAR_CLARIFIER_OFFSET,
FT1000D_NATIVE_CLARIFIER_OPS,
FT1000D_NATIVE_FREQ_SET,
FT1000D_NATIVE_MODE_SET_LSB,
FT1000D_NATIVE_MODE_SET_USB,
FT1000D_NATIVE_MODE_SET_CW_W,
FT1000D_NATIVE_MODE_SET_CW_N,
FT1000D_NATIVE_MODE_SET_AM_W,
FT1000D_NATIVE_MODE_SET_AM_N,
FT1000D_NATIVE_MODE_SET_FM,
FT1000D_NATIVE_MODE_SET_RTTY_LSB,
FT1000D_NATIVE_MODE_SET_RTTY_USB,
FT1000D_NATIVE_MODE_SET_PKT_LSB,
FT1000D_NATIVE_MODE_SET_PKT_FM,
FT1000D_NATIVE_MODE_SUB_VFOB_SET_LSB, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_USB, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_CW_W, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_CW_N, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_AM_W, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_AM_N, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_FM, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_RTTY_LSB, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_RTTY_USB, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_PKT_LSB, /* Added December 2016 */
FT1000D_NATIVE_MODE_SUB_VFOB_SET_PKT_FM, /* Added December 2016 */
FT1000D_NATIVE_PACING,
FT1000D_NATIVE_PTT_OFF,
FT1000D_NATIVE_PTT_ON,
FT1000D_NATIVE_UPDATE_ALL_DATA,
FT1000D_NATIVE_UPDATE_MEM_CHNL,
FT1000D_NATIVE_UPDATE_OP_DATA,
FT1000D_NATIVE_UPDATE_VFO_DATA,
FT1000D_NATIVE_UPDATE_MEM_CHNL_DATA,
FT1000D_NATIVE_TUNER_OFF,
FT1000D_NATIVE_TUNER_ON,
FT1000D_NATIVE_TUNER_START,
FT1000D_NATIVE_RPTR_SHIFT_NONE,
FT1000D_NATIVE_RPTR_SHIFT_MINUS,
FT1000D_NATIVE_RPTR_SHIFT_PLUS,
FT1000D_NATIVE_VFO_TO_VFO,
FT1000D_NATIVE_SET_SUB_VFO_FREQ,
FT1000D_NATIVE_BANDWIDTH,
FT1000D_NATIVE_OP_FREQ_STEP_UP,
FT1000D_NATIVE_OP_FREQ_STEP_DOWN,
FT1000D_NATIVE_READ_METER,
FT1000D_NATIVE_DIM_LEVEL,
FT1000D_NATIVE_RPTR_OFFSET,
FT1000D_NATIVE_READ_FLAGS,
FT1000D_NATIVE_SIZE
};
static int ft1000d_init(RIG *rig);
static int ft1000d_cleanup(RIG *rig);
static int ft1000d_open(RIG *rig);
static int ft1000d_close(RIG *rig);
static int ft1000d_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int ft1000d_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
static int ft1000d_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
static int ft1000d_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode,
pbwidth_t *width);
static int ft1000d_set_vfo(RIG *rig, vfo_t vfo);
static int ft1000d_get_vfo(RIG *rig, vfo_t *vfo);
static int ft1000d_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
static int ft1000d_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
static int ft1000d_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t rptr_shift);
static int ft1000d_get_rptr_shift(RIG *rig, vfo_t vfo,
rptr_shift_t *rptr_shift);
static int ft1000d_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs);
static int ft1000d_set_split_freq(RIG *rig, vfo_t vfo,
freq_t tx_freq); /* Added December 2016 */
static int ft1000d_get_split_freq(RIG *rig, vfo_t vfo,
freq_t *tx_freq); /* Added December 2016 */
static int ft1000d_set_split_vfo(RIG *rig, vfo_t vfo, split_t split,
vfo_t tx_vfo);
static int ft1000d_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split,
vfo_t *tx_vfo);
static int ft1000d_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode,
pbwidth_t tx_width); /* Added December 2016 */
static int ft1000d_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode,
pbwidth_t *tx_width); /* Added December 2016 */
static int ft1000d_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit);
static int ft1000d_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit);
static int ft1000d_set_func(RIG *rig, vfo_t vfo, setting_t func, int status);
static int ft1000d_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status);
static int ft1000d_set_parm(RIG *rig, setting_t parm, value_t val);
static int ft1000d_set_xit(RIG *rig, vfo_t vfo, shortfreq_t xit);
static int ft1000d_get_xit(RIG *rig, vfo_t vfo, shortfreq_t *xit);
static int ft1000d_get_level(RIG *rig, vfo_t vfo, setting_t level,
value_t *value);
static int ft1000d_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op);
static int ft1000d_set_mem(RIG *rig, vfo_t vfo, int ch);
static int ft1000d_get_mem(RIG *rig, vfo_t vfo, int *ch);
static int ft1000d_set_channel(RIG *rig, vfo_t vfo, const channel_t *chan);
static int ft1000d_get_channel(RIG *rig, vfo_t vfo, channel_t *chan,
int read_only);
/* Private helper function prototypes */
static int ft1000d_get_update_data(RIG *rig, unsigned char ci,
unsigned short ch);
static int ft1000d_send_static_cmd(RIG *rig, unsigned char ci);
static int ft1000d_send_dynamic_cmd(RIG *rig, unsigned char ci,
unsigned char p1, unsigned char p2,
unsigned char p3, unsigned char p4);
static int ft1000d_send_dial_freq(RIG *rig, unsigned char ci, freq_t freq);
static int ft1000d_send_rit_freq(RIG *rig, unsigned char ci, shortfreq_t rit);
static const yaesu_cmd_set_t ncmd[] =
{
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x01 } }, /* Split (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x01 } }, /* Split (On) */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x02 } }, /* Recall Memory */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x03 } }, /* Memory Operations */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x04 } }, /* Lock (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x04 } }, /* Lock (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x05 } }, /* Select VFO (A) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x05 } }, /* Select VFO (B) */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x06 } }, /* Copy Memory Data to VFO A */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x07 } }, /* OP Freq Up 0.1MHz */
{ 1, { 0x00, 0x00, 0x01, 0x00, 0x07 } }, /* OP Freq Up 1MHz */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x08 } }, /* OP Freq Down 0.1MHz */
{ 1, { 0x00, 0x00, 0x01, 0x00, 0x08 } }, /* OP Freq Down 1MHz */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x09 } }, /* RX Clarifier (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x09 } }, /* RX Clarifier (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x80, 0x09 } }, /* TX Clarifier (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x81, 0x09 } }, /* TX Clarifier (ON) */
{ 1, { 0x00, 0x00, 0x00, 0xff, 0x09 } }, /* Clear Clarifier Offset */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x09 } }, /* Clarifier */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0a } }, /* Set Op Freq */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x0c } }, /* OP Mode Set LSB */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x0c } }, /* OP Mode Set USB */
{ 1, { 0x00, 0x00, 0x00, 0x02, 0x0c } }, /* OP Mode Set CW 2.4KHz */
{ 1, { 0x00, 0x00, 0x00, 0x03, 0x0c } }, /* OP Mode Set CW 500Hz */
{ 1, { 0x00, 0x00, 0x00, 0x04, 0x0c } }, /* OP Mode Set AM 6KHz */
{ 1, { 0x00, 0x00, 0x00, 0x05, 0x0c } }, /* OP Mode Set AM 2.4KHz */
{ 1, { 0x00, 0x00, 0x00, 0x06, 0x0c } }, /* OP Mode Set FM */
{ 1, { 0x00, 0x00, 0x00, 0x08, 0x0c } }, /* OP Mode Set RTTY LSB */
{ 1, { 0x00, 0x00, 0x00, 0x09, 0x0c } }, /* OP Mode Set RTTY USB */
{ 1, { 0x00, 0x00, 0x00, 0x0a, 0x0c } }, /* OP Mode Set PKT LSB */
{ 1, { 0x00, 0x00, 0x00, 0x0b, 0x0c } }, /* OP Mode Set PKT FM */
{ 1, { 0x00, 0x00, 0x00, 0x80, 0x0c } }, /* Sub VFOB OP Mode Set LSB Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x81, 0x0c } }, /* Sub VFOB OP Mode Set USB Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x82, 0x0c } }, /* Sub VFOB OP Mode Set CW 2.4KHz Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x83, 0x0c } }, /* Sub VFOB OP Mode Set CW 500Hz Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x84, 0x0c } }, /* Sub VFOB OP Mode Set AM 6KHz Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x85, 0x0c } }, /* Sub VFOB OP Mode Set AM 2.4KHz Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x86, 0x0c } }, /* Sub VFOB OP Mode Set FM Added December 2016*/
{ 1, { 0x00, 0x00, 0x00, 0x88, 0x0c } }, /* Sub VFOB OP Mode Set RTTY LSB Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x89, 0x0c } }, /* Sub VFOB OP Mode Set RTTY USB Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x8a, 0x0c } }, /* Sub VFOB OP Mode Set PKT LSB Added December 2016 */
{ 1, { 0x00, 0x00, 0x00, 0x8b, 0x0c } }, /* Sub VFOB OP Mode Set PKT FM Added December 2016 */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0e } }, /* Pacing */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x0f } }, /* PTT (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x0f } }, /* PTT (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x10 } }, /* Update All Data (1636 bytes) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x10 } }, /* Update Memory Ch Number */
{ 1, { 0x00, 0x00, 0x00, 0x02, 0x10 } }, /* Update Op Data */
{ 1, { 0x00, 0x00, 0x00, 0x03, 0x10 } }, /* Update VFO Data */
{ 0, { 0x00, 0x00, 0x00, 0x04, 0x10 } }, /* Update Memory Ch Data */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x81 } }, /* Tuner (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x81 } }, /* Tuner (ON) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x82 } }, /* Tuner (Start) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x84 } }, /* Repeater Mode (OFF) */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x84 } }, /* Repeater Mode (Minus) */
{ 1, { 0x00, 0x00, 0x00, 0x02, 0x84 } }, /* Repeater Mode (Plus) */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x85 } }, /* Copy displayed VFO (A=B || B=A) */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x8A } }, /* Set Sub VFO Frequency Added December 2016 */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x8C } }, /* Select Bandwidth */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x8E } }, /* Step Operating Frequency Up */
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x8E } }, /* Step Operating Frequency Down */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xf7 } }, /* Read Meter */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0xf8 } }, /* DIM Level */
{ 0, { 0x00, 0x00, 0x00, 0x00, 0xf9 } }, /* Set Offset for Repeater Shift */
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xfa } }, /* Read Status Flags */
};
/*
* Private data
*/
struct ft1000d_priv_data
{
unsigned char pacing; /* pacing value */
vfo_t current_vfo; /* active VFO from last cmd */
vfo_t split_vfo; /* TX VFO in split mode Added on 16 Dec 2016 to include FT1000D function */
split_t split; /* split active or not Added on 16 Dec 2016 to include FT1000D function */
unsigned char p_cmd[YAESU_CMD_LENGTH]; /* private copy of CAT cmd */
ft1000d_update_data_t update_data; /* returned data */
};
/*
* FT1000D rigs capabilities.
*/
#define FT1000D_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.rit = 1, \
.xit = 1, \
.rptr_shift = 1, \
.flags = 1, \
}
const struct rig_caps ft1000d_caps =
{
RIG_MODEL(RIG_MODEL_FT1000D),
.model_name = "FT-1000D",
.mfg_name = "Yaesu",
.version = "20211111.0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = FT1000D_WRITE_DELAY,
.post_write_delay = FT1000D_POST_WRITE_DELAY,
.timeout = 500,
.retry = 2,
.has_get_func = RIG_FUNC_LOCK | RIG_FUNC_TUNER | RIG_FUNC_MON,
.has_set_func = RIG_FUNC_LOCK | RIG_FUNC_TUNER,
.has_get_level = RIG_LEVEL_STRENGTH | RIG_LEVEL_SWR | RIG_LEVEL_ALC | \
RIG_LEVEL_RFPOWER | RIG_LEVEL_COMP,
.has_set_level = RIG_LEVEL_BAND_SELECT,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_BACKLIGHT,
.level_gran =
{
#include "level_gran_yaesu.h"
},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1200),
.vfo_ops = RIG_OP_CPY | RIG_OP_FROM_VFO | RIG_OP_TO_VFO |
RIG_OP_UP | RIG_OP_DOWN | RIG_OP_TUNE | RIG_OP_TOGGLE,
.targetable_vfo = RIG_TARGETABLE_ALL,
.transceive = RIG_TRN_OFF, /* Yaesus have to be polled, sigh */
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{1, 90, RIG_MTYPE_MEM, FT1000D_MEM_CAP},
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100), MHz(30), FT1000D_ALL_RX_MODES, -1, -1, FT1000D_VFO_ALL, FT1000D_ANTS}, /* General coverage + ham */
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FT1000D_OTHER_TX_MODES, W(5), W(100), FT1000D_VFO_ALL, FT1000D_ANTS),
FRQ_RNG_HF(1, FT1000D_AM_TX_MODES, W(2), W(25), FT1000D_VFO_ALL, FT1000D_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(100), MHz(30), FT1000D_ALL_RX_MODES, -1, -1, FT1000D_VFO_ALL, FT1000D_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FT1000D_OTHER_TX_MODES, W(5), W(100), FT1000D_VFO_ALL, FT1000D_ANTS),
FRQ_RNG_HF(2, FT1000D_AM_TX_MODES, W(2), W(25), FT1000D_VFO_ALL, FT1000D_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FT1000D_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FT1000D_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FT1000D_AM_RX_MODES, Hz(100)}, /* Normal */
{FT1000D_AM_RX_MODES, kHz(1)}, /* Fast */
{FT1000D_FM_RX_MODES, Hz(100)}, /* Normal */
{FT1000D_FM_RX_MODES, kHz(1)}, /* Fast */
{FT1000D_RTTY_RX_MODES, Hz(10)}, /* Normal */
{FT1000D_RTTY_RX_MODES, Hz(100)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{RIG_MODE_SSB, RIG_FLT_ANY}, /* Enable all filters for SSB */
{RIG_MODE_CW, RIG_FLT_ANY}, /* Enable all filters for CW */
{RIG_MODE_RTTY, RIG_FLT_ANY}, /* Enable all filters for RTTY */
{RIG_MODE_RTTYR, RIG_FLT_ANY}, /* Enable all filters for Reverse RTTY */
{RIG_MODE_PKTLSB, RIG_FLT_ANY}, /* Enable all filters for Packet Radio LSB */
{RIG_MODE_AM, kHz(6)}, /* normal AM filter */
{RIG_MODE_AM, kHz(2.4)}, /* narrow AM filter */
{RIG_MODE_FM, kHz(8)}, /* FM standard filter */
{RIG_MODE_PKTFM, kHz(8)}, /* FM standard filter for Packet Radio FM */
RIG_FLT_END,
},
.priv = NULL, /* private data FIXME: */
.rig_init = ft1000d_init,
.rig_cleanup = ft1000d_cleanup,
.rig_open = ft1000d_open, /* port opened */
.rig_close = ft1000d_close, /* port closed */
.set_freq = ft1000d_set_freq,
.get_freq = ft1000d_get_freq,
.set_mode = ft1000d_set_mode,
.get_mode = ft1000d_get_mode,
.set_vfo = ft1000d_set_vfo,
.get_vfo = ft1000d_get_vfo,
.set_ptt = ft1000d_set_ptt,
.get_ptt = ft1000d_get_ptt,
.set_rptr_shift = ft1000d_set_rptr_shift,
.get_rptr_shift = ft1000d_get_rptr_shift,
.set_rptr_offs = ft1000d_set_rptr_offs,
.set_split_freq = ft1000d_set_split_freq, /* Added December 2016 to expand range of FT1000D functions. */
.get_split_freq = ft1000d_get_split_freq, /* Added December 2016 to expand range of FT1000D functions. */
.set_split_mode = ft1000d_set_split_mode, /* Added December 2016 to expand range of FT1000D functions. */
.get_split_mode = ft1000d_get_split_mode, /* Added December 2016 to expand range of FT1000D functions. */
.set_split_vfo = ft1000d_set_split_vfo, /* Changed in December 2016 so that vfos toggle back and forth like pressing Split button on rig */
.get_split_vfo = ft1000d_get_split_vfo,
.set_rit = ft1000d_set_rit,
.get_rit = ft1000d_get_rit,
.set_xit = ft1000d_set_xit,
.get_xit = ft1000d_get_xit,
.set_func = ft1000d_set_func,
.get_func = ft1000d_get_func,
.set_parm = ft1000d_set_parm,
.get_level = ft1000d_get_level,
.set_mem = ft1000d_set_mem,
.get_mem = ft1000d_get_mem,
.vfo_op = ft1000d_vfo_op,
.set_channel = ft1000d_set_channel,
.get_channel = ft1000d_get_channel,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* ************************************
*
* Hamlib API functions
*
* ************************************
*/
/*
* rig_init
*/
static int ft1000d_init(RIG *rig)
{
struct ft1000d_priv_data *priv;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig->state.priv = (struct ft1000d_priv_data *) calloc(1,
sizeof(struct ft1000d_priv_data));
if (!rig->state.priv)
{
return -RIG_ENOMEM;
}
priv = rig->state.priv;
// Set default pacing value
priv->pacing = FT1000D_PACING_DEFAULT_VALUE;
// Set operating vfo mode to current VFO changed from RIG_VFO_MAIN to RIG_VFO_A December 2016
priv->current_vfo = RIG_VFO_A;
return RIG_OK;
}
/*
* rig_cleanup
*/
static int ft1000d_cleanup(RIG *rig)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
if (rig->state.priv)
{
free(rig->state.priv);
}
rig->state.priv = NULL;
return RIG_OK;
}
/*
* rig_open
*/
static int ft1000d_open(RIG *rig)
{
struct rig_state *rig_s;
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *)rig->state.priv;
rig_s = &rig->state;
rig_debug(RIG_DEBUG_TRACE, "%s: write_delay = %i msec\n",
__func__, rig_s->rigport.write_delay);
rig_debug(RIG_DEBUG_TRACE, "%s: post_write_delay = %i msec\n",
__func__, rig_s->rigport.post_write_delay);
rig_debug(RIG_DEBUG_TRACE,
"%s: read pacing = %i\n", __func__, priv->pacing);
err = ft1000d_send_dynamic_cmd(rig, FT1000D_NATIVE_PACING, priv->pacing, 0, 0,
0);
if (err != RIG_OK)
{
return err;
}
// Get current rig settings and status
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_UPDATE_OP_DATA, 0);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_close
*/
static int ft1000d_close(RIG *rig)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_set_freq*
*
* Set frequency for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* freq | input | 100000 - 30000000
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed freq = %"PRIfreq" Hz\n", __func__, freq);
// Frequency range sanity check
if (freq < 100000 || freq > 30000000)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *)rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n", __func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
err = ft1000d_send_dial_freq(rig, FT1000D_NATIVE_FREQ_SET, freq);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_freq*
*
* Get frequency for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* freq * | output | 100000 - 30000000
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
struct ft1000d_priv_data *priv;
unsigned char *p;
freq_t f;
int err;
int ci;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *)rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
p = priv->update_data.vfoa.basefreq;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = priv->update_data.vfob.basefreq;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
p = priv->update_data.current_front.basefreq;
ci = FT1000D_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
// Get update data structure to obtain get frequency
err = ft1000d_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
/* big endian integer */
f = ((((p[0] << 8) + p[1]) << 8) + p[2]) * 10;
rig_debug(RIG_DEBUG_TRACE, "%s: p0=0x%02x p1=0x%02x p2=0x%02x\n",
__func__, p[0], p[1], p[2]);
rig_debug(RIG_DEBUG_TRACE,
"%s: freq = %"PRIfreq" Hz for vfo 0x%02x\n", __func__, f, vfo);
// Frequency sanity check
if (f < 100000 || f > 30000000)
{
return -RIG_EINVAL;
}
*freq = f;
return RIG_OK;
}
/*
* rig_set_ptt*
*
* Control PTT for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* ptt | input | 0 = off, 1 = off
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
{
struct ft1000d_priv_data *priv;
int err;
unsigned char ci;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed ptt = 0x%02x\n", __func__, ptt);
priv = (struct ft1000d_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
switch (ptt)
{
case RIG_PTT_ON:
ci = FT1000D_NATIVE_PTT_ON;
break;
case RIG_PTT_OFF:
ci = FT1000D_NATIVE_PTT_OFF;
break;
default:
return -RIG_EINVAL;
}
err = ft1000d_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_ptt*
*
* Get PTT line status
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* ptt * | output | 0 = off, 1 = on
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the PTT status
* is independent from the VFO selection.
*/
static int ft1000d_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft1000d_priv_data *) rig->state.priv;
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
*ptt = ((priv->update_data.flag1 & FT1000D_SF_XMIT) != 0);
rig_debug(RIG_DEBUG_TRACE, "%s: set ptt = 0x%02x\n", __func__, *ptt);
return RIG_OK;
}
/*
* rig_set_rptr_shift*
*
* Set repeater shift for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* freq | input | - = negative repeater shift,
* | | + = positive repeater shift,
* | | any other character = simplex (is this a bug?)
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
* Repeater shift can only be set when in FM mode.
*/
static int ft1000d_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t rptr_shift)
{
struct ft1000d_priv_data *priv;
unsigned char ci;
char *p;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed rptr_shift = 0x%02x\n", __func__,
rptr_shift);
priv = (struct ft1000d_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
// Construct update query
switch (vfo)
{
case RIG_VFO_A:
p = (char *) &priv->update_data.vfoa.mode;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = (char *) &priv->update_data.vfob.mode;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_MEM:
p = (char *) &priv->update_data.current_front.mode;
ci = FT1000D_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO
err = ft1000d_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set mode = 0x%02x\n", __func__, *p);
// Shift mode settings are only valid in FM mode
if ((*p & FT1000D_MODE_FM) == 0)
{
return -RIG_EINVAL;
}
// Construct repeater shift command
switch (rptr_shift)
{
case RIG_RPT_SHIFT_NONE:
ci = FT1000D_NATIVE_RPTR_SHIFT_NONE;
break;
case RIG_RPT_SHIFT_MINUS:
ci = FT1000D_NATIVE_RPTR_SHIFT_MINUS;
break;
case RIG_RPT_SHIFT_PLUS:
ci = FT1000D_NATIVE_RPTR_SHIFT_PLUS;
break;
default:
return -RIG_EINVAL;
}
// Set repeater shift
err = ft1000d_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_rptr_shift*
*
* Get repeater shift setting for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* shift * | output | 0 = simplex
* | | 1 = negative repeater shift
* | | 2 = positive repeater shift
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
* Repeater shift can only be obtained when in FM mode.
*/
static int ft1000d_get_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t *rptr_shift)
{
struct ft1000d_priv_data *priv;
ft1000d_op_data_t *p;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
// Construct update query
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
p = &priv->update_data.vfoa;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = &priv->update_data.vfob;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
p = &priv->update_data.current_front;
ci = FT1000D_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO
err = ft1000d_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set mode = 0x%02x\n", __func__, p->mode);
// Shift mode settings are only valid in FM mode
if (p->mode & FT1000D_MODE_FM)
{
*rptr_shift = (p->status & FT1000D_RPT_MASK) >> 2;
}
else
{
rig_debug(RIG_DEBUG_TRACE, "%s: Rig not in FM mode = 0x%02x\n", __func__,
*rptr_shift);
}
return -RIG_EINVAL;
rig_debug(RIG_DEBUG_TRACE, "%s: set rptr shift = 0x%02x\n", __func__,
*rptr_shift);
return RIG_OK;
}
/*
* rig_set_rptr_offs*
*
* Set repeater frequency offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* off | input | 0 - 199999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* repeater frequency offset is independent from the VFO selection.
*/
static int ft1000d_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs)
{
unsigned char bcd[(int) FT1000D_BCD_RPTR_OFFSET / 2];
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed offs = %d\n", __func__, (int)offs);
// Check for valid offset
if (offs < 0 || offs > 199999)
{
return -RIG_EINVAL;
}
to_bcd(bcd, offs / 10, FT1000D_BCD_RPTR_OFFSET);
rig_debug(RIG_DEBUG_TRACE,
"%s: set bcd[0] = 0x%02x, bcd[1] = 0x%02x, bcd[2] = 0x%02x\n",
__func__, bcd[0], bcd[1], bcd[2]);
err = ft1000d_send_dynamic_cmd(rig, FT1000D_NATIVE_RPTR_OFFSET, 0,
bcd[2], bcd[1], bcd[0]);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_set_split_vfo*
*
* Set split operation for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* split | input | 0 = off, 1 = on
* tx_vfo | input | currVFO, VFOA, VFOB
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo or tx_vfo will use the currently
* selected VFO obtained from the priv->current_vfo data structure.
* Only VFOA and VFOB are valid assignments for the tx_vfo.
* The tx_vfo is loaded first when assigning MEM to vfo to ensure
* the correct TX VFO is selected by the rig in split mode.
* An error is returned if vfo and tx_vfo are the same.
*/
static int ft1000d_set_split_vfo(RIG *rig, vfo_t vfo, split_t split,
vfo_t tx_vfo)
{
struct ft1000d_priv_data *priv;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed split = 0x%02x\n", __func__, split);
rig_debug(RIG_DEBUG_TRACE, "%s: passed tx_vfo = 0x%02x\n", __func__, tx_vfo);
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: vfo = priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
if (tx_vfo == RIG_VFO_CURR)
{
tx_vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: tx_vfo = priv->current.vfo = 0x%02x\n",
__func__, tx_vfo);
}
// RX VFO and TX VFO cannot be the same, no support for MEM as TX VFO
if (vfo == tx_vfo || tx_vfo == RIG_VFO_MEM)
{
return -RIG_ENTARGET;
}
// Set TX VFO first if RIG_VFO_MEM selected for RX VFO
if (vfo == RIG_VFO_MEM)
{
err = ft1000d_set_vfo(rig, tx_vfo);
if (err != RIG_OK)
{
return err;
}
}
// Set RX VFO
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
switch (split)
{
case RIG_SPLIT_ON:
ci = FT1000D_NATIVE_SPLIT_ON;
break;
case RIG_SPLIT_OFF:
ci = FT1000D_NATIVE_SPLIT_OFF;
/* added below line to force VFOA in simplex operation */
// priv->current_vfo = RIG_VFO_A;
break;
default:
return -RIG_EINVAL;
}
err = ft1000d_send_static_cmd(rig, ci);
if (err != RIG_OK) /* ; */
{
return err;
}
return RIG_OK;
}
/*
* rig_get_split_vfo*
*
* Get split mode status for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* split * | output | 0 = on, 1 = off
* tx_vfo * | output | VFOA, VFOB
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored in order to
* preserve the current split vfo system settings.
*/
static int ft1000d_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split,
vfo_t *tx_vfo)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft1000d_priv_data *) rig->state.priv;
// Read status flags
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
// Get split mode status
*split = priv->update_data.flag1 & FT1000D_SF_SPLIT;
rig_debug(RIG_DEBUG_TRACE, "%s: set split = 0x%02x\n", __func__,
priv->update_data.flag1);
rig_debug(RIG_DEBUG_TRACE, "%s: set split = 0x%02x\n", __func__, *split);
// Added in December 2016 to ensure get split vfo only works if Spilt function is active.
// FT1000D_SF_VFOB which is data bit 4 of flag byte 1 on the FT1000D does not work. Added the code below
// to check that the Split function is active on the FT1000D.
if (priv->update_data.flag1 & FT1000D_SF_SPLIT) // Added 15 Dec 2016.
// Get transmit vfo
switch (priv->current_vfo)
{
case RIG_VFO_A:
*tx_vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
*tx_vfo = RIG_VFO_A;
break;
case RIG_VFO_MEM:
if (priv->update_data.flag1 & FT1000D_SF_SPLIT)
{
*tx_vfo = RIG_VFO_B;
}
else
{
*tx_vfo = RIG_VFO_A;
}
break;
default:
return -RIG_EINVAL;
rig_debug(RIG_DEBUG_TRACE, "%s: set tx_vfo = 0x%02x\n", __func__, *tx_vfo);
}
else
{
rig_debug(RIG_DEBUG_TRACE, "%s: Split not set on rig = 0x%02x\n", __func__,
*tx_vfo);
}
return RIG_OK;
}
/*
* rig_set_rit*
*
* Set receiver clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* rit | input | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*
* The following conditions are checked:
*
* rit = 0 && xit enabled -> disable rit
* rit = 0 && xit disabled -> disable rit and set frequency = 0
*/
static int ft1000d_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed rit = %d\n", __func__, (int)rit);
// Check for valid clarifier offset frequency
if (rit < -9999 || rit > 9999)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
// If rit = 0 disable RX clarifier
if (rit == 0)
{
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_UPDATE_OP_DATA, 0);
if (err != RIG_OK)
{
return err;
}
if ((priv->update_data.current_front.status & FT1000D_CLAR_TX_EN) == 0)
{
err = ft1000d_send_static_cmd(rig, FT1000D_NATIVE_CLEAR_CLARIFIER_OFFSET);
if (err != RIG_OK)
{
return err;
}
}
// Disable RX Clarifier
err = ft1000d_send_static_cmd(rig, FT1000D_NATIVE_RX_CLARIFIER_OFF);
if (err != RIG_OK)
{
return err;
}
}
else
{
// Enable RX Clarifier
err = ft1000d_send_static_cmd(rig, FT1000D_NATIVE_RX_CLARIFIER_ON);
if (err != RIG_OK)
{
return err;
}
// Set RX clarifier offset
err = ft1000d_send_rit_freq(rig, FT1000D_NATIVE_CLARIFIER_OPS, rit);
if (err != RIG_OK)
{
return err;
}
}
return RIG_OK;
}
/*
* rig_get_rit*
*
* Get receiver clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* rit * | output | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit)
{
struct ft1000d_priv_data *priv;
unsigned char ci;
ft1000d_op_data_t *p;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo = 0x%02x\n",
__func__, vfo);
}
// Construct update query
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
p = (ft1000d_op_data_t *) &priv->update_data.vfoa;
break;
case RIG_VFO_B:
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
p = (ft1000d_op_data_t *) &priv->update_data.vfob;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
ci = FT1000D_NATIVE_UPDATE_OP_DATA;
p = (ft1000d_op_data_t *) &priv->update_data.current_front;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO/MEM
err = ft1000d_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
// Clarifier offset is only returned when enabled
if (p->status & FT1000D_CLAR_RX_EN)
{
*rit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
else
{
*rit = 0;
}
rig_debug(RIG_DEBUG_TRACE, "%s: rit freq = %li Hz\n", __func__, *rit);
return RIG_OK;
}
/*
* rig_set_xit*
*
* Set transmitter clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* xit | input | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*
* The following conditions are checked:
*
* xit = 0 && rit enabled -> disable xit
* xit = 0 && rit disabled -> disable xit and set frequency = 0
*/
static int ft1000d_set_xit(RIG *rig, vfo_t vfo, shortfreq_t xit)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed rit = %d\n", __func__, (int)xit);
if (xit < -9999 || xit > 9999)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *) rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
// Disable TX clarifier and return if xit = 0
if (xit == 0)
{
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_UPDATE_OP_DATA, 0);
if (err != RIG_OK)
{
return err;
}
if ((priv->update_data.current_front.status & FT1000D_CLAR_RX_EN) == 0)
{
err = ft1000d_send_static_cmd(rig, FT1000D_NATIVE_CLEAR_CLARIFIER_OFFSET);
if (err != RIG_OK)
{
return err;
}
}
err = ft1000d_send_static_cmd(rig, FT1000D_NATIVE_TX_CLARIFIER_OFF);
if (err != RIG_OK)
{
return err;
}
}
else
{
// Enable TX Clarifier
err = ft1000d_send_static_cmd(rig, FT1000D_NATIVE_TX_CLARIFIER_ON);
if (err != RIG_OK)
{
return err;
}
// Set TX clarifier offset
err = ft1000d_send_rit_freq(rig, FT1000D_NATIVE_CLARIFIER_OPS, xit);
if (err != RIG_OK)
{
return err;
}
}
return RIG_OK;
}
/*
* rig_get_xit*
*
* Get transmitter clarifier offset for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* xit * | output | -9999 - 9999
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_get_xit(RIG *rig, vfo_t vfo, shortfreq_t *xit)
{
struct ft1000d_priv_data *priv;
unsigned char ci;
ft1000d_op_data_t *p;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo = 0x%02x\n",
__func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
case RIG_VFO_VFO:
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
p = (ft1000d_op_data_t *) &priv->update_data.vfoa;
break;
case RIG_VFO_B:
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
p = (ft1000d_op_data_t *) &priv->update_data.vfob;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
ci = FT1000D_NATIVE_UPDATE_OP_DATA;
p = (ft1000d_op_data_t *) &priv->update_data.current_front;
break;
default:
return -RIG_EINVAL;
}
err = ft1000d_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
// Clarifier offset is only returned when enabled
if (p->status & FT1000D_CLAR_TX_EN)
{
*xit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
else
{
*xit = 0;
}
rig_debug(RIG_DEBUG_TRACE, "%s: read freq = %li Hz\n", __func__, *xit);
return RIG_OK;
}
/*
* rig_set_func*
*
* Set rig function
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* func | input | LOCK, TUNER
* status | input | 0 = off, 1 = on
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* the status of rig functions are vfo independent.
*/
static int ft1000d_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed func = %s\n", __func__,
rig_strfunc(func));
rig_debug(RIG_DEBUG_TRACE, "%s: passed status = %d\n", __func__, status);
switch (func)
{
case RIG_FUNC_LOCK:
if (status)
{
ci = FT1000D_NATIVE_LOCK_ON;
}
else
{
ci = FT1000D_NATIVE_LOCK_OFF;
}
break;
case RIG_FUNC_TUNER:
if (status)
{
ci = FT1000D_NATIVE_TUNER_ON;
}
else
{
ci = FT1000D_NATIVE_TUNER_OFF;
}
break;
default:
return -RIG_EINVAL;
}
err = ft1000d_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_func*
*
* Get status of a rig function
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* func | input | LOCK, TUNER, MON
* status * | output | 0 = off, 1 = on
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* the status of rig function are vfo independent.
*/
static int ft1000d_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed func = %s\n", __func__,
rig_strfunc(func));
priv = (struct ft1000d_priv_data *)rig->state.priv;
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
switch (func)
{
case RIG_FUNC_LOCK:
*status = ((priv->update_data.flag2 & FT1000D_SF_LOCKED) != 0);
break;
case RIG_FUNC_TUNER:
*status = ((priv->update_data.flag3 & FT1000D_SF_TUNER_ON) != 0);
break;
case RIG_FUNC_MON:
*status = ((priv->update_data.flag3 & FT1000D_SF_XMIT_MON) != 0);
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_set_parm*
*
* Set rig parameters that are not VFO specific
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* parm | input | BACKLIGHT
* val | input | 0.0..1.0
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments:
*/
static int ft1000d_set_parm(RIG *rig, setting_t parm, value_t val)
{
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed parm = %s\n", __func__,
rig_strparm(parm));
rig_debug(RIG_DEBUG_TRACE, "%s: passed val = %f\n", __func__, val.f);
switch (parm)
{
case RIG_PARM_BACKLIGHT:
err = ft1000d_send_dynamic_cmd(rig, FT1000D_NATIVE_DIM_LEVEL,
(unsigned char)(0x0d * val.f), 0, 0, 0);
break;
default:
return -RIG_EINVAL;
}
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_set_mode*
*
* Set operating mode and passband for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* mode | input | USB, LSB, CW, AM, FM, RTTY, RTTYR, PKTLSB, PKTFM
* width | input | 2400, 2000, 500, 250 (USB)
* | | 2400, 2000, 500, 250 (LSB)
* | | 2400, 2000, 500, 250 (CW)
* | | 2400, 2000, 500, 250 (RTTY)
* | | 2400, 2000, 500, 250 (RTTYR)
* | | 2400, 2000, 500, 250 (PKTLSB)
* | | 6000, 2400 (AM)
* | | 8000 (FM)
* | | 8000 (PKTFM)
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
struct ft1000d_priv_data *priv;
unsigned char bw;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed mode = %s\n", __func__,
rig_strrmode(mode));
rig_debug(RIG_DEBUG_TRACE, "%s: passed width = %d Hz\n", __func__, (int)width);
priv = (struct ft1000d_priv_data *)rig->state.priv;
// Set to selected VFO
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current.vfo = 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
switch (mode)
{
case RIG_MODE_AM:
if (width == rig_passband_narrow(rig, mode))
{
ci = FT1000D_NATIVE_MODE_SET_AM_N;
}
else if (width == rig_passband_normal(rig, mode))
{
ci = FT1000D_NATIVE_MODE_SET_AM_W;
}
else
{
return -RIG_EINVAL;
}
break;
case RIG_MODE_CW:
ci = FT1000D_NATIVE_MODE_SET_CW_W;
break;
case RIG_MODE_USB:
ci = FT1000D_NATIVE_MODE_SET_USB;
break;
case RIG_MODE_LSB:
ci = FT1000D_NATIVE_MODE_SET_LSB;
break;
case RIG_MODE_RTTY:
ci = FT1000D_NATIVE_MODE_SET_RTTY_LSB;
break;
case RIG_MODE_RTTYR:
ci = FT1000D_NATIVE_MODE_SET_RTTY_USB;
break;
case RIG_MODE_FM:
ci = FT1000D_NATIVE_MODE_SET_FM;
break;
case RIG_MODE_PKTLSB:
ci = FT1000D_NATIVE_MODE_SET_PKT_LSB;
break;
case RIG_MODE_PKTFM:
ci = FT1000D_NATIVE_MODE_SET_PKT_FM;
break;
default:
return -RIG_EINVAL;
}
err = ft1000d_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
if (ci == FT1000D_NATIVE_MODE_SET_AM_N ||
ci == FT1000D_NATIVE_MODE_SET_AM_W ||
ci == FT1000D_NATIVE_MODE_SET_FM ||
ci == FT1000D_NATIVE_MODE_SET_PKT_FM)
{
return RIG_OK;
}
if (width <= 250) { bw = FT1000D_BW_F250; }
else if (width <= 500) { bw = FT1000D_BW_F500; }
else if (width <= 2000) { bw = FT1000D_BW_F2000; }
else { bw = FT1000D_BW_F2400; }
rig_debug(RIG_DEBUG_TRACE, "%s: set bw = 0x%02x\n", __func__, bw);
err = ft1000d_send_dynamic_cmd(rig, FT1000D_NATIVE_BANDWIDTH, bw, 0, 0, 0);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_mode*
*
* Get operating mode and passband for a given VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* mode | input | USB, LSB, CW, AM, FM, RTTY, RTTYR, PKTLSB, PKTFM
* width * | output | 2400, 2000, 500, 250 (USB)
* | | 2400, 2000, 500, 250 (LSB)
* | | 2400, 2000, 500, 250 (CW)
* | | 2400, 2000, 500, 250 (RTTY)
* | | 2400, 2000, 500, 250 (RTTYR)
* | | 2400, 2000, 500, 250 (PKTLSB)
* | | 6000, 2400 (AM)
* | | 8000 (FM)
* | | 8000 (PKTFM)
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode,
pbwidth_t *width)
{
struct ft1000d_priv_data *priv;
unsigned char *p;
unsigned char *fl;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, RIG_VFO_CURR);
priv = (struct ft1000d_priv_data *)rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE,
"%s: priv->current_vfo = 0x%02x\n", __func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
p = &priv->update_data.vfoa.mode;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
fl = &priv->update_data.vfoa.filter;
break;
case RIG_VFO_VFO:
p = &priv->update_data.vfoa.mode;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
fl = &priv->update_data.vfoa.filter;
break;
case RIG_VFO_B:
p = &priv->update_data.vfob.mode;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
fl = &priv->update_data.vfob.filter;
break;
case RIG_VFO_MEM:
case RIG_VFO_MAIN:
p = &priv->update_data.current_front.mode;
ci = FT1000D_NATIVE_UPDATE_OP_DATA;
fl = &priv->update_data.current_front.filter;
break;
default:
return -RIG_EINVAL;
}
// Get update for selected VFO
err = ft1000d_get_update_data(rig, ci, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: fl = 0x%02x\n", __func__, *fl);
rig_debug(RIG_DEBUG_TRACE, "%s: current mode = 0x%02x\n", __func__, *p);
switch (*p)
{
case FT1000D_MODE_LSB:
*mode = RIG_MODE_LSB;
break;
case FT1000D_MODE_USB:
*mode = RIG_MODE_USB;
break;
case FT1000D_MODE_CW:
*mode = RIG_MODE_CW;
break;
case FT1000D_MODE_AM:
*mode = RIG_MODE_AM;
break;
case FT1000D_MODE_FM:
*mode = RIG_MODE_FM;
break;
case FT1000D_MODE_RTTY:
if (*fl & FT1000D_BW_FMPKTRTTY)
{
*mode = RIG_MODE_RTTYR;
}
else
{
*mode = RIG_MODE_RTTY;
}
break;
case FT1000D_MODE_PKT:
if (*fl & FT1000D_BW_FMPKTRTTY)
{
*mode = RIG_MODE_PKTFM;
}
else
{
*mode = RIG_MODE_PKTLSB;
}
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: get mode = %s\n", __func__,
rig_strrmode(*mode));
// The FT1000D firmware appears to have a bug since the
// AM bandwidth for 2400Hz and 6000Hz are interchanged.
switch (*fl & (~FT1000D_BW_FMPKTRTTY))
{
case FT1000D_BW_F2400:
if (*mode == RIG_MODE_FM || *mode == RIG_MODE_PKTFM)
{
*width = 8000;
}
else if (*mode == RIG_MODE_AM) // <- FT1000D firmware bug?
{
*width = 6000;
}
else
{
*width = 2400;
}
break;
case FT1000D_BW_F2000:
*width = 2000;
break;
case FT1000D_BW_F500:
*width = 500;
break;
case FT1000D_BW_F250:
*width = 250;
break;
case FT1000D_BW_F6000:
*width = 2400; // <- FT1000D firmware bug?
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: get width = %li Hz\n", __func__, *width);
return RIG_OK;
}
/*
* rig_set_vfo*
*
* Set operational VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_set_vfo(RIG *rig, vfo_t vfo)
{
struct ft1000d_priv_data *priv;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *)rig->state.priv;
rig_debug(RIG_DEBUG_TRACE, "%s: MADE IT TO rig.state.priv = 0x%02x\n", __func__,
RIG_VFO_CURR);
// if (vfo == RIG_VFO_CURR) {
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE,
"%s: priv->current_vfo = 0x%02x\n", __func__, vfo);
}
switch (vfo)
{
case RIG_VFO_A:
ci = FT1000D_NATIVE_VFO_A;
rig_debug(RIG_DEBUG_TRACE, "%s: MADE IT TO VFO A = 0x%02x\n", __func__,
RIG_VFO_CURR);
break;
case RIG_VFO_B:
ci = FT1000D_NATIVE_VFO_B;
rig_debug(RIG_DEBUG_TRACE, "%s: MADE IT TO VFO B = 0x%02x\n", __func__,
RIG_VFO_CURR);
break;
case RIG_VFO_MEM:
ci = FT1000D_NATIVE_RECALL_MEM;
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set ci = %i\n", __func__, ci);
if (vfo == RIG_VFO_MEM)
{
err = ft1000d_send_dynamic_cmd(rig, ci,
priv->update_data.channelnumber + 1, 0, 0, 0);
rig_debug(RIG_DEBUG_TRACE, "%s: set mem channel = 0x%02x\n",
__func__, priv->update_data.channelnumber + 1);
}
else
{
err = ft1000d_send_static_cmd(rig, ci);
}
if (err != RIG_OK)
{
return err;
}
priv->current_vfo = vfo;
return RIG_OK;
}
/*
* rig_get_vfo*
*
* Get operational VFO
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo * | output | VFOA, VFOB, MEM
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
* The result is stored in the priv->current_vfo data structure
* for later retrieval.
*/
static int ft1000d_get_vfo(RIG *rig, vfo_t *vfo)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
*vfo = RIG_VFO_CURR;
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *)rig->state.priv;
/* Get flags for VFO status */
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
if (priv->update_data.flag2 & FT1000D_SF_MEM ||
priv->update_data.flag2 & FT1000D_SF_MTUNE)
{
priv->current_vfo = RIG_VFO_MEM;
}
else if (priv->update_data.flag1 & FT1000D_SF_VFOB_INUSE)
{
priv->current_vfo = RIG_VFO_B;
}
else
{
priv->current_vfo = RIG_VFO_A;
}
rig_debug(RIG_DEBUG_TRACE,
"%s: vfo status_1 = 0x%02x\n", __func__,
priv->update_data.flag1);
rig_debug(RIG_DEBUG_TRACE,
"%s: vfo status_2 = 0x%02x\n", __func__,
priv->update_data.flag2);
rig_debug(RIG_DEBUG_TRACE,
"%s: stat_vfo = 0x%02x\n", __func__, priv->current_vfo);
*vfo = priv->current_vfo;
return RIG_OK;
}
/*
* rig_get_level
*
* This function will read the meter level.The data
* is processed depending upon selection of the level
* parameter. The following are the currently supported
* levels and returned value range:
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, Main, VFO, VFOA, VFOB, MEM
* level | input | STRENGTH, ALC, COMP, RFPOWER, SWR
* value * | output | see table below
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* ----------------------------------------------------------
* level | Description | Returned Value | Units |
* ----------------------------------------------------------
* STRENGTH | Signal Strength | -54 .. +60 | db |
* COMP | Compression | 0.0 .. 1.0 | %/100 |
* RFPOWER | RF Power Output | 0.0 .. 1.0 | %/100 |
* SWR | Standing Wave Ratio | 0.0 .. 1.0 | %/100 |
* ----------------------------------------------------------
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_get_level(RIG *rig, vfo_t vfo, setting_t level,
value_t *value)
{
struct ft1000d_priv_data *priv;
unsigned char mdata[YAESU_CMD_LENGTH];
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed level %s\n", __func__,
rig_strlevel(level));
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
err = ft1000d_send_static_cmd(rig, FT1000D_NATIVE_READ_METER);
if (err != RIG_OK)
{
return err;
}
err = read_block(&rig->state.rigport, mdata, FT1000D_READ_METER_LENGTH);
if (err < 0)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: meter data %d\n", __func__, mdata[0]);
switch (level)
{
case RIG_LEVEL_STRENGTH:
value->i = mdata[0] / 2.246 - 54;
rig_debug(RIG_DEBUG_TRACE, "%s: meter level %d\n", __func__, value->i);
break;
case RIG_LEVEL_ALC:
case RIG_LEVEL_COMP:
case RIG_LEVEL_RFPOWER:
case RIG_LEVEL_SWR:
value->f = (float) mdata[0] / 255;
rig_debug(RIG_DEBUG_TRACE, "%s: meter level %f\n", __func__, value->f);
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_vfo_op*
*
* Perform vfo operations
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | VFOA, VFOB, MEM
* op | input | CPY = copy from VFO to VFO
* | | FROM_VFO = copy from VFO to MEM
* | | TO_VFO = copy from MEM to VFO
* | | UP = step dial frequency up
* | | DOWN = step dial frequency down
* | | TUNE = start antenna tuner
* | | TOGGLE = toggle between VFOA and VFOB
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing currVFO to vfo will use the currently selected VFO
* obtained from the priv->current_vfo data structure.
* In all other cases the passed vfo is selected if it differs
* from the currently selected VFO.
*/
static int ft1000d_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
{
struct ft1000d_priv_data *priv;
unsigned char ci;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed op %sn", __func__, rig_strvfop(op));
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo 0x%02x\n",
__func__, vfo);
}
else
{
if (vfo != priv->current_vfo)
{
err = ft1000d_set_vfo(rig, vfo);
if (err != RIG_OK)
{
return err;
}
}
}
switch (op)
{
case RIG_OP_CPY:
ci = FT1000D_NATIVE_VFO_TO_VFO;
break;
case RIG_OP_FROM_VFO:
ci = FT1000D_NATIVE_VFO_TO_MEM;
break;
case RIG_OP_TO_VFO:
ci = FT1000D_NATIVE_MEM_TO_VFO;
break;
case RIG_OP_UP:
ci = FT1000D_NATIVE_OP_FREQ_STEP_UP;
break;
case RIG_OP_DOWN:
ci = FT1000D_NATIVE_OP_FREQ_STEP_DOWN;
break;
case RIG_OP_TUNE:
ci = FT1000D_NATIVE_TUNER_START;
break;
case RIG_OP_TOGGLE:
switch (vfo)
{
case RIG_VFO_A:
ci = FT1000D_NATIVE_VFO_B;
vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
ci = FT1000D_NATIVE_VFO_A;
vfo = RIG_VFO_A;
break;
default:
return -RIG_EINVAL;
}
break;
default:
return -RIG_EINVAL;
}
if (op == RIG_OP_TO_VFO || op == RIG_OP_FROM_VFO)
err = ft1000d_send_dynamic_cmd(rig, ci,
priv->update_data.channelnumber + 1, 0, 0, 0);
else
{
err = ft1000d_send_static_cmd(rig, ci);
}
if (err != RIG_OK)
{
return err;
}
if (op == RIG_OP_TOGGLE)
{
priv->current_vfo = vfo;
}
return RIG_OK;
}
/*
* rig_set_mem*
*
* Set main vfo to selected memory channel number
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* ch | input | 1 - 90
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since the
* the channel selection is vfo independent.
*/
static int ft1000d_set_mem(RIG *rig, vfo_t vfo, int ch)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ch = %i\n", __func__, ch);
priv = (struct ft1000d_priv_data *) rig->state.priv;
// Check for valid channel number
if (ch < 1 || ch > 90)
{
return -RIG_EINVAL;
}
// Recall selected memory channel
err = ft1000d_send_dynamic_cmd(rig, FT1000D_NATIVE_RECALL_MEM, ch, 0, 0, 0);
if (err != RIG_OK)
{
return err;
}
priv->current_vfo = RIG_VFO_MEM;
priv->update_data.channelnumber = ch - 1;
return RIG_OK;
}
/*
* rig_get_mem*
*
* Get memory channel number used by main vfo
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* ch * | output | 1 - 90
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The passed value for the vfo is ignored since
* the channel selection is vfo independent.
*/
static int ft1000d_get_mem(RIG *rig, vfo_t vfo, int *ch)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (vfo == RIG_VFO_CURR)
{
vfo = priv->current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: priv->current_vfo = 0x%02x\n",
__func__, vfo);
}
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_UPDATE_MEM_CHNL, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: channel number %i\n", __func__,
priv->update_data.channelnumber + 1);
*ch = priv->update_data.channelnumber + 1;
// Check for valid channel number
if (*ch < 1 || *ch > 90)
{
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* rig_set_channel*
*
* Set memory channel parameters and attributes
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* chan * | input | channel attribute data structure
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*/
static int ft1000d_set_channel(RIG *rig, vfo_t vfo, const channel_t *chan)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
return -RIG_ENIMPL;
}
/*
* rig_get_channel*
*
* Get memory channel parameters and attributes
*
* Parameter | Type | Accepted/Expected Values
* -------------------------------------------------------------------------
* RIG * | input | pointer to private data
* chan * | input | (chan->vfo) currVFO, VFOA, VFOB, MEM
* | | (chan->channel_num) 0 - 90
* chan * | output | channel attributes data structure
* -------------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Passing a memory channel number of 0 returns information on
* the current channel or channel last in use.
*
* Status for split operation, active rig functions and tuning steps
* are only relevant for currVFO
*/
static int ft1000d_get_channel(RIG *rig, vfo_t vfo, channel_t *chan,
int read_only)
{
struct ft1000d_priv_data *priv;
ft1000d_op_data_t *p;
char ci;
int err;
channel_t _chan;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed chan->vfo = %i\n",
__func__, chan->vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed chan->channel_num = %i\n",
__func__, chan->channel_num);
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (chan->channel_num < 0 || chan->channel_num > 90)
{
return -RIG_EINVAL;
}
/*
* Get a clean slate so we don't have to assign value to
* variables that are not relevant to this equipment
*/
_chan.channel_num = chan->channel_num;
_chan.vfo = chan->vfo;
memset(chan, 0, sizeof(channel_t));
chan->channel_num = _chan.channel_num;
chan->vfo = _chan.vfo;
if (chan->channel_num == 0)
{
switch (chan->vfo)
{
// Current or last selected memory channel
case RIG_VFO_MEM:
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_UPDATE_MEM_CHNL, 0);
if (err != RIG_OK)
{
return err;
}
chan->channel_num = priv->update_data.channelnumber + 1;
p = (ft1000d_op_data_t *) &priv->update_data.channel[chan->channel_num];
ci = FT1000D_NATIVE_UPDATE_MEM_CHNL_DATA;
break;
case RIG_VFO_A:
p = (ft1000d_op_data_t *) &priv->update_data.vfoa;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_B:
p = (ft1000d_op_data_t *) &priv->update_data.vfob;
ci = FT1000D_NATIVE_UPDATE_VFO_DATA;
break;
case RIG_VFO_CURR:
p = (ft1000d_op_data_t *) &priv->update_data.current_front;
ci = FT1000D_NATIVE_UPDATE_OP_DATA;
break;
default:
return -RIG_EINVAL;
}
}
else
{
p = (ft1000d_op_data_t *) &priv->update_data.channel[chan->channel_num];
ci = FT1000D_NATIVE_UPDATE_MEM_CHNL_DATA;
chan->vfo = RIG_VFO_MEM;
}
/*
* Get data for selected VFO/MEM
*/
err = ft1000d_get_update_data(rig, ci, chan->channel_num);
if (err != RIG_OK)
{
return err;
}
// Blanked memory, nothing to report
if (p->bpf & FT1000D_EMPTY_MEM)
{
return RIG_OK;
}
/*
* Get RX frequency
*/
chan->freq = ((((p->basefreq[0] << 8) + p->basefreq[1]) << 8) +
p->basefreq[2]) * 10;
/*
* Get RX operating mode
*/
switch (p->mode)
{
case FT1000D_MODE_LSB:
chan->mode = RIG_MODE_LSB;
break;
case FT1000D_MODE_USB:
chan->mode = RIG_MODE_USB;
break;
case FT1000D_MODE_CW:
chan->mode = RIG_MODE_CW;
break;
case FT1000D_MODE_AM:
chan->mode = RIG_MODE_AM;
break;
case FT1000D_MODE_FM:
chan->mode = RIG_MODE_FM;
break;
case FT1000D_MODE_RTTY:
if (p->filter & FT1000D_BW_FMPKTRTTY)
{
chan->mode = RIG_MODE_RTTYR;
}
else
{
chan->mode = RIG_MODE_RTTY;
}
break;
case FT1000D_MODE_PKT:
if (p->filter & FT1000D_BW_FMPKTRTTY)
{
chan->mode = RIG_MODE_PKTFM;
}
else
{
chan->mode = RIG_MODE_PKTLSB;
}
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: mode = %s\n", __func__, rig_strrmode(p->mode));
rig_debug(RIG_DEBUG_TRACE, "%s: filter = 0x%02x\n", __func__, p->filter);
/*
* Get RX bandwidth selection
*
* The FT1000D firmware appears to have a bug since the
* AM bandwidth for 2400Hz and 6000Hz are interchanged.
*/
switch (p->filter & (~FT1000D_BW_FMPKTRTTY))
{
case FT1000D_BW_F2400:
if (chan->mode == RIG_MODE_FM || chan->mode == RIG_MODE_PKTFM)
{
chan->width = 8000;
}
else if (chan->mode == RIG_MODE_AM) // <- FT1000D firmware bug?
{
chan->width = 6000;
}
else
{
chan->width = 2400;
}
break;
case FT1000D_BW_F2000:
chan->width = 2000;
break;
case FT1000D_BW_F500:
chan->width = 500;
break;
case FT1000D_BW_F250:
chan->width = 250;
break;
case FT1000D_BW_F6000:
chan->width = 2400; // <- FT1000D firmware bug?
break;
default:
return -RIG_EINVAL;
}
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_READ_FLAGS, 0);
if (err != RIG_OK)
{
return err;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set status = %i\n", __func__,
priv->update_data.flag1);
/*
* Status for split operation, active rig functions and tuning steps
* are only relevant for currVFO
*/
if (chan->vfo & RIG_VFO_CURR)
{
chan->split = (priv->update_data.flag1 & FT1000D_SF_SPLIT);
if (priv->update_data.flag1 & FT1000D_SF_XMIT_MON)
{
chan->funcs |= RIG_FUNC_MON;
}
if (priv->update_data.flag1 & FT1000D_SF_TUNER_ON)
{
chan->funcs |= RIG_FUNC_TUNER;
}
if (priv->update_data.flag1 & FT1000D_SF_ANT_TUNER_ACTIVE)
{
if (chan->mode & (FT1000D_AM_RX_MODES | FT1000D_FM_RX_MODES))
{
chan->tuning_step = 1000;
}
else
{
chan->tuning_step = 100;
}
}
else
{
if (chan->mode & (FT1000D_AM_RX_MODES | FT1000D_FM_RX_MODES))
{
chan->tuning_step = 100;
}
else
{
chan->tuning_step = 10;
}
}
}
/*
* Get RIT frequencies
*/
if (p->status & FT1000D_CLAR_RX_EN)
{
chan->rit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
if (chan->split & RIG_SPLIT_ON)
{
// Get data for the transmit VFO
p = (ft1000d_op_data_t *) &priv->update_data.current_rear;
/* FT1000D */
if (RIG_MODEL_FT1000D == rig->caps->rig_model)
{
p = (ft1000d_op_data_t *) &priv->update_data.vfob;
}
chan->tx_freq = ((((p->basefreq[0] << 8) + p->basefreq[1]) << 8) +
p->basefreq[2]) * 10;
/*
* Get RX operating mode
*/
switch (p->mode)
{
case FT1000D_MODE_LSB:
chan->tx_mode = RIG_MODE_LSB;
break;
case FT1000D_MODE_USB:
chan->tx_mode = RIG_MODE_USB;
break;
case FT1000D_MODE_CW:
chan->tx_mode = RIG_MODE_CW;
break;
case FT1000D_MODE_AM:
chan->tx_mode = RIG_MODE_AM;
break;
case FT1000D_MODE_FM:
chan->tx_mode = RIG_MODE_FM;
break;
case FT1000D_MODE_RTTY:
if (p->filter & FT1000D_BW_FMPKTRTTY)
{
chan->tx_mode = RIG_MODE_RTTYR;
}
else
{
chan->tx_mode = RIG_MODE_RTTY;
}
break;
case FT1000D_MODE_PKT:
if (p->filter & FT1000D_BW_FMPKTRTTY)
{
chan->tx_mode = RIG_MODE_PKTFM;
}
else
{
chan->tx_mode = RIG_MODE_PKTLSB;
}
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: set tx mode = %s\n", __func__,
rig_strrmode(chan->mode));
rig_debug(RIG_DEBUG_TRACE, "%s: tx filter = 0x%02x\n", __func__, p->filter);
/*
* Get RX bandwidth selection
*
* The FT1000D firmware appears to have a bug since the
* AM bandwidth for 2400Hz and 6000Hz are interchanged.
*/
switch (p->filter & (~FT1000D_BW_FMPKTRTTY))
{
case FT1000D_BW_F2400:
if (chan->tx_mode == RIG_MODE_FM || chan->mode == RIG_MODE_PKTFM)
{
chan->tx_width = 8000;
}
else if (chan->tx_mode == RIG_MODE_AM) // <- FT1000D firmware bug?
{
chan->tx_width = 6000;
}
else
{
chan->tx_width = 2400;
}
break;
case FT1000D_BW_F2000:
chan->tx_width = 2000;
break;
case FT1000D_BW_F500:
chan->tx_width = 500;
break;
case FT1000D_BW_F250:
chan->tx_width = 250;
break;
case FT1000D_BW_F6000:
chan->tx_width = 2400; // <- FT1000D firmware bug?
break;
default:
return -RIG_EINVAL;
}
/* For now commented this out to better understand what's going on */
if (priv->update_data.flag1 & FT1000D_SF_DUAL)
{
if (chan->tx_vfo & (RIG_VFO_A | RIG_VFO_MEM))
{
chan->tx_vfo = RIG_VFO_B;
}
else if (chan->vfo & RIG_VFO_MEM)
{
chan->tx_vfo = RIG_VFO_A;
}
else
{
chan->tx_vfo = RIG_VFO_MEM;
}
}
else
{
if (chan->vfo & RIG_VFO_A)
{
chan->tx_vfo = RIG_VFO_MEM;
}
else
{
chan->tx_vfo = RIG_VFO_A;
}
}
/*
* Get XIT frequencies
*/
if (p->status & FT1000D_CLAR_TX_EN)
{
chan->xit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
}
else
{
/*
* RX/TX frequency, mode, bandwidth and vfo are identical in simplex mode
*/
chan->tx_freq = chan->freq;
chan->tx_mode = chan->mode;
chan->tx_width = chan->width;
chan->tx_vfo = chan->vfo;
/*
* Get XIT frequencies
*/
if (p->status & FT1000D_CLAR_TX_EN)
{
chan->xit = (short)((p->coffset[0] << 8) | p->coffset[1]) * 10;
}
}
rig_debug(RIG_DEBUG_TRACE, "%s: set status = %i\n", __func__, p->status);
/*
* Repeater shift only possible if transmit mode is FM
*/
if (chan->tx_mode & RIG_MODE_FM)
{
chan->rptr_shift = (p->status & FT1000D_RPT_MASK) >> 2;
}
/*
* Check for skip channel for memory channels
*/
if (chan->vfo & RIG_VFO_MEM)
{
chan->flags |= RIG_CHFLAG_SKIP;
}
if (!read_only)
{
// Set rig to channel values
rig_debug(RIG_DEBUG_ERR,
"%s: please contact hamlib mailing list to implement this\n", __func__);
rig_debug(RIG_DEBUG_ERR,
"%s: need to know if rig updates when channel read or not\n", __func__);
return -RIG_ENIMPL;
}
return RIG_OK;
}
/*
* Private helper function. Retrieves update data from rig.
* using pacing value and buffer indicated in *priv struct.
* Extended to be command agnostic as 990 has several ways to
* get data and several ways to return it.
*
* Need to use this when doing FT1000D_get_* stuff
*
* Arguments: *rig Valid RIG instance
* ci command index
* rl expected length of returned data in octets
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
static int ft1000d_get_update_data(RIG *rig, unsigned char ci,
unsigned short ch)
{
struct rig_state *rig_s;
struct ft1000d_priv_data *priv;
int n;
int err;
int rl;
int retry;
unsigned char temp[5];
unsigned char *p;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE, "%s: passed ch 0x%02x\n", __func__, ch);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *)rig->state.priv;
rig_s = &rig->state;
retry = rig_s->rigport.retry;
do
{
if (ci == FT1000D_NATIVE_UPDATE_MEM_CHNL_DATA)
// P4 = 0x01 to 0x5a for channel 1 - 90
{
err = ft1000d_send_dynamic_cmd(rig, ci, 4, 0, 0, ch);
}
else
{
err = ft1000d_send_static_cmd(rig, ci);
}
if (err != RIG_OK)
{
return err;
}
switch (ci)
{
case FT1000D_NATIVE_UPDATE_ALL_DATA:
p = (unsigned char *) &priv->update_data;
rl = FT1000D_ALL_DATA_LENGTH;
/* FT1000D */
if (RIG_MODEL_FT1000D == rig->caps->rig_model)
{
return RIG_OK;
}
break;
case FT1000D_NATIVE_UPDATE_MEM_CHNL:
p = (unsigned char *) &priv->update_data.channelnumber;
rl = FT1000D_MEM_CHNL_LENGTH;
break;
case FT1000D_NATIVE_UPDATE_OP_DATA:
p = (unsigned char *) &priv->update_data.current_front;
rl = FT1000D_OP_DATA_LENGTH;
/* FT1000D */
if (RIG_MODEL_FT1000D == rig->caps->rig_model)
{
rl = FT1000D_OP_DATA_LENGTH;
}
break;
case FT1000D_NATIVE_UPDATE_VFO_DATA:
p = (unsigned char *) &priv->update_data.vfoa;
rl = FT1000D_VFO_DATA_LENGTH;
break;
case FT1000D_NATIVE_UPDATE_MEM_CHNL_DATA:
p = (unsigned char *) &priv->update_data.channel[ch];
rl = FT1000D_MEM_CHNL_DATA_LENGTH;
break;
case FT1000D_NATIVE_READ_FLAGS:
p = temp;
rl = FT1000D_STATUS_FLAGS_LENGTH;
break;
default:
return -RIG_EINVAL;
}
n = read_block(&rig->state.rigport, p, rl);
}
while (n < 0 && retry-- >= 0);
if (n < 0)
{
return n; /* die returning read_block error */
}
rig_debug(RIG_DEBUG_TRACE, "%s: read %i bytes\n", __func__, n);
if (ci == FT1000D_NATIVE_READ_FLAGS)
{
memcpy(&priv->update_data, p, FT1000D_STATUS_FLAGS_LENGTH - 2);
}
return RIG_OK;
}
/*
* Private helper function to send a complete command sequence.
*
* TODO: place variant of this in yaesu.c
*
* Arguments: *rig Valid RIG instance
* ci Command index of the ncmd table
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
static int ft1000d_send_static_cmd(RIG *rig, unsigned char ci)
{
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
rig_debug(RIG_DEBUG_TRACE, "%s: ci = 0x%02x\n", __func__, ci);
if (!rig)
{
return -RIG_EINVAL;
}
if (!ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE,
"%s: Attempt to send incomplete sequence\n", __func__);
return -RIG_EINVAL;
}
err = write_block(&rig->state.rigport, ncmd[ci].nseq,
YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
hl_usleep(rig->state.rigport.write_delay * 1000);
return RIG_OK;
}
/*
* Private helper function to build and then send a complete command
* sequence.
*
* TODO: place variant of this in yaesu.c
*
* Arguments: *rig Valid RIG instance
* ci Command index of the ncmd table
* p1-p4 Command parameters
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
static int ft1000d_send_dynamic_cmd(RIG *rig, unsigned char ci,
unsigned char p1, unsigned char p2,
unsigned char p3, unsigned char p4)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci = 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE,
"%s: passed p1 = 0x%02x, p2 = 0x%02x, p3 = 0x%02x, p4 = 0x%02x,\n",
__func__, p1, p2, p3, p4);
priv = (struct ft1000d_priv_data *)rig->state.priv;
if (ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE,
"%s: Attempt to modify complete sequence\n", __func__);
return -RIG_EINVAL;
}
memcpy(&priv->p_cmd, &ncmd[ci].nseq, YAESU_CMD_LENGTH);
priv->p_cmd[3] = p1;
priv->p_cmd[2] = p2;
priv->p_cmd[1] = p3;
priv->p_cmd[0] = p4;
err = write_block(&rig->state.rigport, (unsigned char *) &priv->p_cmd,
YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
hl_usleep(rig->state.rigport.write_delay * 1000);
return RIG_OK;
}
/*
* Private helper function to build and send a complete command to
* change the display frequency.
*
* TODO: place variant of this in yaesu.c
*
* Arguments: *rig Valid RIG instance
* freq freq_t frequency value
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
static int ft1000d_send_dial_freq(RIG *rig, unsigned char ci, freq_t freq)
{
struct ft1000d_priv_data *priv;
int err;
// cppcheck-suppress *
char *fmt = "%s: requested freq after conversion = %"PRIll" Hz\n";
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci = 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE, "%s: passed freq = %"PRIfreq" Hz\n", __func__, freq);
priv = (struct ft1000d_priv_data *)rig->state.priv;
if (ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE,
"%s: Attempt to modify complete sequence\n", __func__);
return -RIG_EINVAL;
}
/* Copy native cmd freq_set to private cmd storage area */
memcpy(&priv->p_cmd, &ncmd[ci].nseq, YAESU_CMD_LENGTH);
/* store bcd format in in p_cmd */
to_bcd(priv->p_cmd, freq / 10, FT1000D_BCD_DIAL);
rig_debug(RIG_DEBUG_TRACE, fmt, __func__, (int64_t)from_bcd(priv->p_cmd,
FT1000D_BCD_DIAL) * 10);
err = write_block(&rig->state.rigport, (unsigned char *) &priv->p_cmd,
YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
hl_usleep(rig->state.rigport.write_delay * 1000);
return RIG_OK;
}
/*
* Private helper function to build and send a complete command to
* change the rit frequency.
*
* Arguments: *rig Valid RIG instance
* ci Command index of the ncmd table
* rit shortfreq_t frequency value
*
* Returns: RIG_OK if all called functions are successful,
* otherwise returns error from called function
*/
static int ft1000d_send_rit_freq(RIG *rig, unsigned char ci, shortfreq_t rit)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed ci = 0x%02x\n", __func__, ci);
rig_debug(RIG_DEBUG_TRACE, "%s: passed rit = %li Hz\n", __func__, rit);
priv = (struct ft1000d_priv_data *) rig->state.priv;
if (ncmd[ci].ncomp)
{
rig_debug(RIG_DEBUG_TRACE, "%s: Attempt to modify complete sequence\n",
__func__);
return -RIG_EINVAL;
}
// Copy native command into privat command storage area
memcpy(&priv->p_cmd, &ncmd[ci].nseq, YAESU_CMD_LENGTH);
// Reset current clarifier offset
priv->p_cmd[3] = FT1000D_CLAR_CLEAR;
// Check and set tuning direction - up or down
if (rit < 0)
{
priv->p_cmd[2] = FT1000D_CLAR_TUNE_DOWN;
}
else
{
priv->p_cmd[2] = FT1000D_CLAR_TUNE_UP;
}
// Store bcd format into privat command storage area
to_bcd(priv->p_cmd, labs(rit) / 10, FT1000D_BCD_RIT);
err = write_block(&rig->state.rigport, (unsigned char *) &priv->p_cmd,
YAESU_CMD_LENGTH);
if (err != RIG_OK)
{
return err;
}
hl_usleep(rig->state.rigport.write_delay * 1000);
return RIG_OK;
}
/* COMMANDS ADDED IN DECEMBER 2016 TO INCLUDE EXTRA FUNCTIONS OF THE FT1000D */
/* rig_set_split_freq*
*
* Set the FT1000D split TX freq
*
* Parameter | Type | Accepted/expected values
* ------------------------------------------------------------------
* *rig | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* tx_freq | input | split transmit frequency
* ------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: The FT1000D is capable of setting the Sub VFO's frequency
* regardless of whether or not the rig is in Split or Dual mode.
*
*/
static int ft1000d_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq)
{
int err;
// struct ft1000d_priv_data *priv;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed freq = %"PRIfreq" Hz\n", __func__,
tx_freq);
err = rig_set_split_vfo(rig, vfo, RIG_SPLIT_ON, RIG_VFO_B);
if (err != RIG_OK) { RETURNFUNC(err); }
// priv = (struct ft1000d_priv_data *)rig->state.priv;
err = ft1000d_send_dial_freq(rig, FT1000D_NATIVE_SET_SUB_VFO_FREQ, tx_freq);
if (err != RIG_OK)
{
return err;
}
// Get current rig settings and status
err = ft1000d_get_update_data(rig, FT1000D_NATIVE_UPDATE_OP_DATA, 0);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_split_freq*
*
* Get the 'FT1000D split TX freq
*
* Parameter | Type | Accepted/expected values
* ------------------------------------------------------------------
* *rig | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* *tx_freq | output | split transmit frequency
* ------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Checks to see if the FT1000D is in split mode, if so it
* checks which VFO is set for TX and then gets the
* frequency of that VFO and stores it into *tx_freq.
* If not in split mode returns 0 Hz.
*
*/
static int ft1000d_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *) rig->state.priv;
err = ft1000d_get_split_vfo(rig, vfo, &priv->split, &priv->split_vfo);
if (err != RIG_OK)
{
return err;
}
switch ((int)priv->split)
{
case TRUE: /* FT1000D is in split mode */
err = ft1000d_get_freq(rig, priv->split_vfo, tx_freq);
if (err != RIG_OK)
{
return err;
}
break;
default:
*tx_freq = 0;
break;
}
return RIG_OK;
}
/*
* rig_set_split_mode
*
* Set the FT1000D split TX mode
*
* Parameter | Type | Accepted/expected values
* ------------------------------------------------------------------
* *rig | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* tx_mode | input | supported modes
* tx_width | input | supported widths
* ------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Sends mode commands directly to Sub VFOB whether or not radio is in
* Split or Dual modes.
*
*/
static int ft1000d_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode,
pbwidth_t tx_width)
{
int err;
unsigned char bw;
unsigned char ci;
// struct ft1000d_priv_data *priv;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = %s\n", __func__, rig_strvfo(vfo));
rig_debug(RIG_DEBUG_TRACE, "%s: passed mode = %s\n", __func__,
rig_strrmode(tx_mode));
rig_debug(RIG_DEBUG_TRACE, "%s: passed width = %d Hz\n", __func__,
(int)tx_width);
// priv = (struct ft1000d_priv_data *)rig->state.priv;
switch (tx_mode)
{
case RIG_MODE_AM:
if (tx_width == rig_passband_narrow(rig, tx_mode))
{
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_AM_N;
}
else if (tx_width == rig_passband_normal(rig, tx_mode))
{
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_AM_W;
}
else
{
return -RIG_EINVAL;
}
break;
case RIG_MODE_CW:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_CW_W;
break;
case RIG_MODE_USB:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_USB;
break;
case RIG_MODE_LSB:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_LSB;
break;
case RIG_MODE_RTTY:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_RTTY_LSB;
break;
case RIG_MODE_RTTYR:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_RTTY_USB;
break;
case RIG_MODE_FM:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_FM;
break;
case RIG_MODE_PKTLSB:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_PKT_LSB;
break;
case RIG_MODE_PKTFM:
ci = FT1000D_NATIVE_MODE_SUB_VFOB_SET_PKT_FM;
break;
default:
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_TRACE, "%s: ci = 0x%02x\n", __func__, ci);
err = ft1000d_send_static_cmd(rig, ci);
if (err != RIG_OK)
{
return err;
}
if (ci == FT1000D_NATIVE_MODE_SUB_VFOB_SET_AM_N ||
ci == FT1000D_NATIVE_MODE_SUB_VFOB_SET_AM_W ||
ci == FT1000D_NATIVE_MODE_SUB_VFOB_SET_FM ||
ci == FT1000D_NATIVE_MODE_SUB_VFOB_SET_PKT_FM)
{
return RIG_OK;
}
if (tx_width <= 250) { bw = FT1000D_BW_F250; }
else if (tx_width <= 500) { bw = FT1000D_BW_F500; }
else if (tx_width <= 2000) { bw = FT1000D_BW_F2000; }
else { bw = FT1000D_BW_F2400; }
rig_debug(RIG_DEBUG_TRACE, "%s: set bw = 0x%02x\n", __func__, bw);
err = ft1000d_send_dynamic_cmd(rig, FT1000D_NATIVE_BANDWIDTH, bw, 0, 0, 0);
if (err != RIG_OK)
{
return err;
}
return RIG_OK;
}
/*
* rig_get_split_mode*
*
* Get the '920 split TX mode
*
* Parameter | Type | Accepted/expected values
* ------------------------------------------------------------------
* *rig | input | pointer to private data
* vfo | input | currVFO, VFOA, VFOB, MEM
* *tx_mode | output | supported modes
* *tx_width | output | supported widths
* ------------------------------------------------------------------
* Returns RIG_OK on success or an error code on failure
*
* Comments: Checks to see if the 920 is in split mode, if so it
* checks which VFO is set for TX and then gets the
* mode and passband of that VFO and stores it into *tx_mode
* and tx_width respectively. If not in split mode returns
* RIG_MODE_NONE and 0 Hz.
*
*/
static int ft1000d_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode,
pbwidth_t *tx_width)
{
struct ft1000d_priv_data *priv;
int err;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
{
return -RIG_EINVAL;
}
priv = (struct ft1000d_priv_data *)rig->state.priv;
err = ft1000d_get_split_vfo(rig, vfo, &priv->split, &priv->split_vfo);
if (err != RIG_OK)
{
return err;
}
switch ((int)priv->split)
{
case TRUE: /* FT1000D is in split mode */
err = ft1000d_get_mode(rig, priv->split_vfo, tx_mode, tx_width);
if (err != RIG_OK)
{
return err;
}
break;
default:
*tx_mode = RIG_MODE_NONE;
*tx_width = 0;
break;
}
return RIG_OK;
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik