Hamlib/icom/ic7100.c

409 wiersze
14 KiB
C

/*
* Hamlib CI-V backend - description of IC-9100 (HF/VHF/UHF All-Mode Tranceiver)
* Copyright (c) 2000-2011 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "idx_builtin.h"
#include "bandplan.h"
#define IC7100_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|\
RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|\
RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTAM|RIG_MODE_PKTFM)
#define IC7100_OTHER_TX_MODES ((IC7100_MODES) & ~(RIG_MODE_AM|RIG_MODE_PKTAM))
#define IC7100_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM)
#define IC7100_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM|RIG_SCAN_SLCT|RIG_SCAN_PRIO)
#define IC7100_VFO_OPS (RIG_OP_FROM_VFO| \
RIG_OP_TO_VFO| \
RIG_OP_CPY| \
RIG_OP_MCL| \
RIG_OP_XCHG| \
RIG_OP_TUNE)
#define IC7100_FUNC_ALL (RIG_FUNC_NB| \
RIG_FUNC_NR| \
RIG_FUNC_ANF| \
RIG_FUNC_TONE| \
RIG_FUNC_TSQL| \
RIG_FUNC_COMP| \
RIG_FUNC_VOX| \
RIG_FUNC_FBKIN| \
RIG_FUNC_AFC| \
RIG_FUNC_SATMODE| \
RIG_FUNC_VSC| \
RIG_FUNC_MN| \
RIG_FUNC_LOCK| \
RIG_FUNC_SCOPE| \
RIG_FUNC_TUNER)
#define IC7100_LEVEL_ALL (RIG_LEVEL_AF| \
RIG_LEVEL_RF| \
RIG_LEVEL_SQL| \
RIG_LEVEL_IF| \
RIG_LEVEL_NR| \
RIG_LEVEL_CWPITCH| \
RIG_LEVEL_RFPOWER| \
RIG_LEVEL_MICGAIN| \
RIG_LEVEL_KEYSPD| \
RIG_LEVEL_COMP| \
RIG_LEVEL_VOXGAIN| \
RIG_LEVEL_VOXDELAY| \
RIG_LEVEL_ANTIVOX| \
RIG_LEVEL_APF| \
RIG_LEVEL_AGC| \
RIG_LEVEL_PBT_IN| \
RIG_LEVEL_PBT_OUT| \
RIG_LEVEL_NOTCHF_RAW| \
RIG_LEVEL_ATT| \
RIG_LEVEL_PREAMP| \
RIG_LEVEL_RAWSTR| \
RIG_LEVEL_STRENGTH| \
RIG_LEVEL_SWR| \
RIG_LEVEL_ALC| \
RIG_LEVEL_RFPOWER_METER| \
RIG_LEVEL_COMP_METER| \
RIG_LEVEL_VD_METER| \
RIG_LEVEL_ID_METER| \
RIG_LEVEL_MONITOR_GAIN| \
RIG_LEVEL_NB)
#define IC7100_PARM_ALL (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
// IC-7100 S-meter calibration data based on manual
#define IC7100_STR_CAL { 14, \
{ \
{ 0, -54 }, \
{ 120, 0 }, \
{ 241, 60 } \
} }
#define IC7100_SWR_CAL { 5, \
{ \
{ 0, 1.0f }, \
{ 48, 1.5f }, \
{ 80, 2.0f }, \
{ 120, 3.0f }, \
{ 240, 6.0f } \
} }
#define IC7100_ALC_CAL { 2, \
{ \
{ 0, 0.0f }, \
{ 120, 1.0f } \
} }
#define IC7100_RFPOWER_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 143, 0.5f }, \
{ 213, 1.0f } \
} }
#define IC7100_COMP_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 130, 15.0f }, \
{ 241, 30.0f } \
} }
#define IC7100_VD_METER_CAL { 3, \
{ \
{ 0, 0.0f }, \
{ 13, 10.0f }, \
{ 241, 16.0f } \
} }
#define IC7100_ID_METER_CAL { 4, \
{ \
{ 0, 0.0f }, \
{ 97, 10.0f }, \
{ 146, 15.0f }, \
{ 241, 25.0f } \
} }
#define IC7100_HF_ANTS (RIG_ANT_1|RIG_ANT_2)
int ic7100_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
int ic7100_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
/*
* IC-7100 rig capabilities.
*/
static const struct icom_priv_caps ic7100_priv_caps =
{
0x88, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic7100_ts_sc_list, /* FIXME */
.agc_levels_present = 1,
.agc_levels = {
{ .level = RIG_AGC_FAST, .icom_level = 1 },
{ .level = RIG_AGC_MEDIUM, .icom_level = 2 },
{ .level = RIG_AGC_SLOW, .icom_level = 3 },
{ .level = -1, .icom_level = 0 },
},
};
const struct rig_caps ic7100_caps =
{
.rig_model = RIG_MODEL_IC7100,
.model_name = "IC-7100",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC7100_FUNC_ALL,
.has_set_func = IC7100_FUNC_ALL | RIG_FUNC_RESUME,
.has_get_level = IC7100_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC7100_LEVEL_ALL),
.has_get_parm = IC7100_PARM_ALL,
.has_set_parm = IC7100_PARM_ALL,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } },
[LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = {20, RIG_DBLST_END, },
.attenuator = {20, RIG_DBLST_END, },
.max_rit = kHz(9.999),
.max_xit = kHz(9.999),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC7100_VFO_OPS,
.scan_ops = IC7100_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 9, /* TODO */
.chan_list = { /* TBC */
{ 1, 396, RIG_MTYPE_MEM },
{ 397, 400, RIG_MTYPE_CALL },
{ 401, 424, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = { /* Europe */
{kHz(30), MHz(60), IC7100_MODES, -1, -1, IC7100_VFO_ALL, IC7100_HF_ANTS},
{kHz(136), MHz(174), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_3},
{MHz(420), MHz(480), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_4},
{MHz(1240), MHz(1320), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_5},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS),
FRQ_RNG_HF(1, RIG_MODE_AM, W(2), W(25), IC7100_VFO_ALL, IC7100_HF_ANTS), /* only HF */
FRQ_RNG_6m(1, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS),
FRQ_RNG_2m(1, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, RIG_ANT_3),
FRQ_RNG_70cm(1, IC7100_OTHER_TX_MODES, W(2), W(75), IC7100_VFO_ALL, RIG_ANT_4),
/* option */
FRQ_RNG_23cm_REGION1(IC7100_OTHER_TX_MODES, W(1), W(10), IC7100_VFO_ALL, RIG_ANT_5),
RIG_FRNG_END,
},
.rx_range_list2 = { /* USA */
{kHz(30), MHz(60), IC7100_MODES, -1, -1, IC7100_VFO_ALL, IC7100_HF_ANTS},
{kHz(136), MHz(174), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_3},
{MHz(420), MHz(480), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_4},
{MHz(1240), MHz(1320), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_5},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS),
FRQ_RNG_HF(2, RIG_MODE_AM, W(2), W(25), IC7100_VFO_ALL, IC7100_HF_ANTS), /* only HF */
/* USA only, TBC: end of range and modes */
{MHz(5.255), MHz(5.405), IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS}, /* USA only */
{MHz(5.255), MHz(5.405), RIG_MODE_AM, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS}, /* USA only */
FRQ_RNG_6m(2, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS),
FRQ_RNG_2m(2, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, RIG_ANT_3),
FRQ_RNG_70cm(2, IC7100_OTHER_TX_MODES, W(2), W(75), IC7100_VFO_ALL, RIG_ANT_4),
/* option */
FRQ_RNG_23cm_REGION2(IC7100_OTHER_TX_MODES, W(1), W(10), IC7100_VFO_ALL, RIG_ANT_5),
RIG_FRNG_END,
},
.tuning_steps = {
{RIG_MODE_SSB | RIG_MODE_CW, 1},
{RIG_MODE_SSB | RIG_MODE_CW, 10},
{RIG_MODE_SSB | RIG_MODE_CW, 50},
{RIG_MODE_SSB | RIG_MODE_CW, 100},
{RIG_MODE_FM, kHz(0.1)},
{RIG_MODE_FM, kHz(5)},
{RIG_MODE_FM, kHz(6.25)},
{RIG_MODE_FM, kHz(10)},
{RIG_MODE_FM, kHz(12.5)},
{RIG_MODE_FM, kHz(20)},
{RIG_MODE_FM, kHz(25)},
{RIG_MODE_FM, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(2.4)},
{RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(1.8)},
{RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(3)},
{RIG_MODE_FM | RIG_MODE_PKTFM, kHz(10)},
{RIG_MODE_FM | RIG_MODE_PKTFM, kHz(15)},
{RIG_MODE_FM | RIG_MODE_PKTFM, kHz(7)},
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(500)},
{RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(250)},
{RIG_MODE_CW | RIG_MODE_CWR, kHz(1.2)},
{RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_AM | RIG_MODE_PKTAM, kHz(6)},
{RIG_MODE_AM | RIG_MODE_PKTAM, kHz(3)},
{RIG_MODE_AM | RIG_MODE_PKTAM, kHz(9)},
RIG_FLT_END,
},
.str_cal = IC7100_STR_CAL,
.swr_cal = IC7100_SWR_CAL,
.alc_cal = IC7100_ALC_CAL,
.rfpower_meter_cal = IC7100_RFPOWER_METER_CAL,
.comp_meter_cal = IC7100_COMP_METER_CAL,
.vd_meter_cal = IC7100_VD_METER_CAL,
.id_meter_cal = IC7100_ID_METER_CAL,
.priv = (void *)& ic7100_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.get_freq = icom_get_freq,
.set_freq = icom_set_freq,
.get_mode = icom_get_mode_with_data,
.set_mode = icom_set_mode_with_data,
.get_vfo = NULL,
.set_vfo = icom_set_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.get_ts = icom_get_ts,
.set_ts = icom_set_ts,
.get_func = icom_get_func,
.set_func = icom_set_func,
.get_level = ic7100_get_level,
.set_level = ic7100_set_level,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.set_rit = icom_set_rit,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_code,
.get_dcs_sql = icom_get_dcs_code,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
.decode_event = icom_decode_event,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_get_split_vfo,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_powerstat = icom_set_powerstat,
.get_powerstat = icom_get_powerstat,
.send_morse = icom_send_morse
};
int ic7100_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
unsigned char cmdbuf[MAXFRAMELEN];
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_VOXDELAY:
cmdbuf[0] = 0x01;
cmdbuf[1] = 0x65;
return icom_set_level_raw(rig, level, C_CTL_MEM, 0x05, 2, cmdbuf, 1, val);
default:
return icom_set_level(rig, vfo, level, val);
}
}
int ic7100_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
unsigned char cmdbuf[MAXFRAMELEN];
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_VOXDELAY:
cmdbuf[0] = 0x01;
cmdbuf[1] = 0x65;
return icom_get_level_raw(rig, level, C_CTL_MEM, 0x05, 2, cmdbuf, val);
default:
return icom_get_level(rig, vfo, level, val);
}
}