kopia lustrzana https://github.com/Hamlib/Hamlib
1009 wiersze
27 KiB
C
1009 wiersze
27 KiB
C
/* -*- mode: c; c-basic-offset: 2; indent-tabs-mode: nil; -*-
|
|
*
|
|
* hamlib - (C) Frank Singleton 2000,2001 (vk3fcs@ix.netcom.com)
|
|
* (C) Stephane Fillod 2000-2009
|
|
*
|
|
* ft857.h - (C) Tomi Manninen 2003 (oh2bns@sral.fi)
|
|
*
|
|
* ...derived but heavily modified from:
|
|
*
|
|
* ft817.h - (C) Chris Karpinsky 2001 (aa1vl@arrl.net)
|
|
*
|
|
* This shared library provides an API for communicating
|
|
* via serial interface to an FT-857 using the "CAT" interface.
|
|
* The starting point for this code was Frank's ft847 implementation.
|
|
*
|
|
*
|
|
* $Id: ft857.c,v 1.13 2009-02-20 09:55:16 fillods Exp $
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Unimplemented features supported by the FT-857:
|
|
*
|
|
* - RIT ON/OFF without touching the RIT offset. This would
|
|
* need frontend support (eg. a new RIG_FUNC_xxx)
|
|
*
|
|
* - DCS encoder/squelch ON/OFF, similar to RIG_FUNC_TONE/TSQL.
|
|
* Needs frontend support.
|
|
*
|
|
* - RX status command returns info that is not used:
|
|
*
|
|
* - discriminator centered (yes/no flag)
|
|
* - received ctcss/dcs matched (yes/no flag)
|
|
*
|
|
* - TX status command returns info that is not used:
|
|
*
|
|
* - high swr flag
|
|
*
|
|
* The manual also indicates that CTCSS and DCS codes can be set
|
|
* separately for tx and rx, but this doesn't seem to work. It
|
|
* doesn't work from front panel either.
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h> /* String function definitions */
|
|
#include <unistd.h> /* UNIX standard function definitions */
|
|
|
|
#ifdef HAVE_SYS_TIME_H
|
|
#include <sys/time.h>
|
|
#endif
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "serial.h"
|
|
#include "yaesu.h"
|
|
#include "ft857.h"
|
|
#include "misc.h"
|
|
#include "tones.h"
|
|
#include "bandplan.h"
|
|
|
|
/* Native ft857 cmd set prototypes. These are READ ONLY as each */
|
|
/* rig instance will copy from these and modify if required . */
|
|
/* Complete sequences (1) can be read and used directly as a cmd sequence . */
|
|
/* Incomplete sequences (0) must be completed with extra parameters */
|
|
/* eg: mem number, or freq etc.. */
|
|
|
|
static const yaesu_cmd_set_t ncmd[] = {
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, /* lock on */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x80 } }, /* lock off */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x08 } }, /* ptt on */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x88 } }, /* ptt off */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x01 } }, /* set freq */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main LSB */
|
|
{ 1, { 0x01, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main USB */
|
|
{ 1, { 0x02, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main CW */
|
|
{ 1, { 0x03, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main CWR */
|
|
{ 1, { 0x04, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main AM */
|
|
{ 1, { 0x08, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main FM */
|
|
{ 1, { 0x88, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main FM-N */
|
|
{ 1, { 0x0a, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main DIG */
|
|
{ 1, { 0x0c, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main PKT */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x05 } }, /* clar on */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x85 } }, /* clar off */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0xf5 } }, /* set clar freq */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x81 } }, /* toggle vfo a/b */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x02 } }, /* split on */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x82 } }, /* split off */
|
|
{ 1, { 0x09, 0x00, 0x00, 0x00, 0x09 } }, /* set RPT shift MINUS */
|
|
{ 1, { 0x49, 0x00, 0x00, 0x00, 0x09 } }, /* set RPT shift PLUS */
|
|
{ 1, { 0x89, 0x00, 0x00, 0x00, 0x09 } }, /* set RPT shift SIMPLEX */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0xf9 } }, /* set RPT offset freq */
|
|
{ 1, { 0x0a, 0x00, 0x00, 0x00, 0x0a } }, /* set DCS on */
|
|
{ 1, { 0x0b, 0x00, 0x00, 0x00, 0x0a } }, /* set DCS decoder on */
|
|
{ 1, { 0x0c, 0x00, 0x00, 0x00, 0x0a } }, /* set DCS encoder on */
|
|
{ 1, { 0x2a, 0x00, 0x00, 0x00, 0x0a } }, /* set CTCSS on */
|
|
{ 1, { 0x3a, 0x00, 0x00, 0x00, 0x0a } }, /* set CTCSS decoder on */
|
|
{ 1, { 0x4a, 0x00, 0x00, 0x00, 0x0a } }, /* set CTCSS encoder on */
|
|
{ 1, { 0x8a, 0x00, 0x00, 0x00, 0x0a } }, /* set CTCSS/DCS off */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0b } }, /* set CTCSS tone */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0c } }, /* set DCS code */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xe7 } }, /* get RX status */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xf7 } }, /* get TX status */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x03 } }, /* get FREQ and MODE status */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, /* pwr wakeup sequence */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x0f } }, /* pwr on */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x8f } }, /* pwr off */
|
|
};
|
|
|
|
|
|
#define FT857_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_USB|\
|
|
RIG_MODE_LSB|RIG_MODE_RTTY|RIG_MODE_FM)
|
|
#define FT857_SSB_CW_RX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_USB|RIG_MODE_LSB)
|
|
#define FT857_AM_FM_RX_MODES (RIG_MODE_AM|RIG_MODE_FM)
|
|
|
|
#define FT857_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_USB|\
|
|
RIG_MODE_LSB|RIG_MODE_RTTY|RIG_MODE_FM)
|
|
#define FT857_AM_TX_MODES (RIG_MODE_AM)
|
|
|
|
#define FT857_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
|
|
#define FT857_ANTS 0
|
|
|
|
const struct rig_caps ft857_caps = {
|
|
.rig_model = RIG_MODEL_FT857,
|
|
.model_name = "FT-857",
|
|
.mfg_name = "Yaesu",
|
|
.version = "0.3",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_BETA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 4800,
|
|
.serial_rate_max = 38400,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 2,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = FT857_WRITE_DELAY,
|
|
.post_write_delay = FT857_POST_WRITE_DELAY,
|
|
.timeout = FT857_TIMEOUT,
|
|
.retry = 0,
|
|
.has_get_func = RIG_FUNC_NONE,
|
|
.has_set_func = RIG_FUNC_LOCK | RIG_FUNC_TONE | RIG_FUNC_TSQL,
|
|
.has_get_level = RIG_LEVEL_STRENGTH | RIG_LEVEL_RFPOWER,
|
|
.has_set_level = RIG_LEVEL_NONE,
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE,
|
|
.level_gran = {}, /* granularity */
|
|
.parm_gran = {},
|
|
.ctcss_list = static_common_ctcss_list,
|
|
.dcs_list = static_full_dcs_list, /* FIXME: only 104 supported */
|
|
.preamp = { RIG_DBLST_END, },
|
|
.attenuator = { RIG_DBLST_END, },
|
|
.max_rit = Hz(9990),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.transceive = RIG_TRN_OFF,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
.chan_list = { RIG_CHAN_END, },
|
|
.vfo_ops = RIG_OP_TOGGLE,
|
|
|
|
.rx_range_list1 = {
|
|
{kHz(100),MHz(56), FT857_ALL_RX_MODES,-1,-1},
|
|
{MHz(76), MHz(108),RIG_MODE_WFM, -1,-1},
|
|
{MHz(118),MHz(164),FT857_ALL_RX_MODES,-1,-1},
|
|
{MHz(420),MHz(470),FT857_ALL_RX_MODES,-1,-1},
|
|
RIG_FRNG_END,
|
|
},
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1,FT857_OTHER_TX_MODES, W(10),W(100),FT857_VFO_ALL,FT857_ANTS),
|
|
/* AM class */
|
|
FRQ_RNG_HF(1,FT857_AM_TX_MODES, W(2.5),W(25),FT857_VFO_ALL,FT857_ANTS),
|
|
FRQ_RNG_2m(1,FT857_OTHER_TX_MODES, W(5),W(50),FT857_VFO_ALL,FT857_ANTS),
|
|
/* AM class */
|
|
FRQ_RNG_2m(1,FT857_AM_TX_MODES, W(2.5),W(25),FT857_VFO_ALL,FT857_ANTS),
|
|
FRQ_RNG_70cm(1,FT857_OTHER_TX_MODES, W(2),W(20),FT857_VFO_ALL,FT857_ANTS),
|
|
/* AM class */
|
|
FRQ_RNG_70cm(1,FT857_AM_TX_MODES, W(0.5),W(5),FT857_VFO_ALL,FT857_ANTS),
|
|
RIG_FRNG_END,
|
|
},
|
|
|
|
|
|
.rx_range_list2 = {
|
|
{kHz(100),MHz(56), FT857_ALL_RX_MODES,-1,-1},
|
|
{MHz(76), MHz(108),RIG_MODE_WFM, -1,-1},
|
|
{MHz(118),MHz(164),FT857_ALL_RX_MODES,-1,-1},
|
|
{MHz(420),MHz(470),FT857_ALL_RX_MODES,-1,-1},
|
|
RIG_FRNG_END,
|
|
},
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2,FT857_OTHER_TX_MODES, W(10),W(100),FT857_VFO_ALL,FT857_ANTS),
|
|
/* AM class */
|
|
FRQ_RNG_HF(2,FT857_AM_TX_MODES, W(2.5),W(25),FT857_VFO_ALL,FT857_ANTS),
|
|
FRQ_RNG_2m(2,FT857_OTHER_TX_MODES, W(5),W(50),FT857_VFO_ALL,FT857_ANTS),
|
|
/* AM class */
|
|
FRQ_RNG_2m(2,FT857_AM_TX_MODES, W(2.5),W(25),FT857_VFO_ALL,FT857_ANTS),
|
|
FRQ_RNG_70cm(2,FT857_OTHER_TX_MODES, W(2),W(20),FT857_VFO_ALL,FT857_ANTS),
|
|
/* AM class */
|
|
FRQ_RNG_70cm(2,FT857_AM_TX_MODES, W(0.5),W(5),FT857_VFO_ALL,FT857_ANTS),
|
|
RIG_FRNG_END,
|
|
},
|
|
|
|
.tuning_steps = {
|
|
{FT857_SSB_CW_RX_MODES,10},
|
|
{FT857_SSB_CW_RX_MODES,100},
|
|
{FT857_AM_FM_RX_MODES,10},
|
|
{FT857_AM_FM_RX_MODES,100},
|
|
RIG_TS_END,
|
|
},
|
|
|
|
/* filter selection is not supported by CAT functions
|
|
* per testing by Rich Newsom, WA4SXZ
|
|
*/
|
|
.filters = {
|
|
// {RIG_MODE_SSB, kHz(2.2)},
|
|
// {RIG_MODE_CW, kHz(2.2)},
|
|
// {RIG_MODE_CWR, kHz(2.2)},
|
|
// {RIG_MODE_RTTY, kHz(2.2)},
|
|
// {RIG_MODE_AM, kHz(6)},
|
|
// {RIG_MODE_FM, kHz(15)},
|
|
// {RIG_MODE_PKTFM, kHz(15)},
|
|
// {RIG_MODE_FM, kHz(9)},
|
|
// {RIG_MODE_PKTFM, kHz(9)},
|
|
// {RIG_MODE_WFM, kHz(230)}, /* ?? */
|
|
RIG_FLT_END,
|
|
},
|
|
|
|
.priv = NULL,
|
|
.rig_init = ft857_init,
|
|
.rig_cleanup = ft857_cleanup,
|
|
.rig_open = ft857_open,
|
|
.rig_close = ft857_close,
|
|
.set_freq = ft857_set_freq,
|
|
.get_freq = ft857_get_freq,
|
|
.set_mode = ft857_set_mode,
|
|
.get_mode = ft857_get_mode,
|
|
.set_vfo = NULL,
|
|
.get_vfo = NULL,
|
|
.set_ptt = ft857_set_ptt,
|
|
.get_ptt = ft857_get_ptt,
|
|
.get_dcd = ft857_get_dcd,
|
|
.set_rptr_shift = ft857_set_rptr_shift,
|
|
.get_rptr_shift = NULL,
|
|
.set_rptr_offs = ft857_set_rptr_offs,
|
|
.get_rptr_offs = NULL,
|
|
.set_split_freq = NULL,
|
|
.get_split_freq = NULL,
|
|
.set_split_mode = NULL,
|
|
.get_split_mode = NULL,
|
|
.set_split_vfo = ft857_set_split_vfo,
|
|
.get_split_vfo = ft857_get_split_vfo,
|
|
.set_rit = ft857_set_rit,
|
|
.get_rit = NULL,
|
|
.set_xit = NULL,
|
|
.get_xit = NULL,
|
|
.set_ts = NULL,
|
|
.get_ts = NULL,
|
|
.set_dcs_code = ft857_set_dcs_code,
|
|
.get_dcs_code = NULL,
|
|
.set_ctcss_tone = ft857_set_ctcss_tone,
|
|
.get_ctcss_tone = NULL,
|
|
.set_dcs_sql = ft857_set_dcs_sql,
|
|
.get_dcs_sql = NULL,
|
|
.set_ctcss_sql = ft857_set_ctcss_sql,
|
|
.get_ctcss_sql = NULL,
|
|
.set_powerstat = NULL,
|
|
.get_powerstat = NULL,
|
|
.reset = NULL,
|
|
.set_ant = NULL,
|
|
.get_ant = NULL,
|
|
.set_level = NULL,
|
|
.get_level = ft857_get_level,
|
|
.set_func = ft857_set_func,
|
|
.get_func = NULL,
|
|
.set_parm = NULL,
|
|
.get_parm = NULL,
|
|
.vfo_op = ft857_vfo_op,
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
int ft857_init(RIG *rig)
|
|
{
|
|
struct ft857_priv_data *p;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft857:ft857_init called \n");
|
|
|
|
if ((p = calloc(1, sizeof(struct ft857_priv_data))) == NULL)
|
|
return -RIG_ENOMEM;
|
|
|
|
/* Copy complete native cmd set to private cmd storage area */
|
|
memcpy(p->pcs, ncmd, sizeof(ncmd));
|
|
|
|
rig->state.priv = (void*) p;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_cleanup(RIG *rig)
|
|
{
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft857:ft857_cleanup called \n");
|
|
|
|
if (rig->state.priv)
|
|
free(rig->state.priv);
|
|
rig->state.priv = NULL;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_open(RIG *rig)
|
|
{
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft857:ft857_open called \n");
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_close(RIG *rig)
|
|
{
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft857:ft857_close called \n");
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static inline long timediff(struct timeval *tv1, struct timeval *tv2)
|
|
{
|
|
struct timeval tv;
|
|
|
|
tv.tv_usec = tv1->tv_usec - tv2->tv_usec;
|
|
tv.tv_sec = tv1->tv_sec - tv2->tv_sec;
|
|
|
|
return ((tv.tv_sec * 1000L) + (tv.tv_usec / 1000L));
|
|
}
|
|
|
|
static int check_cache_timeout(struct timeval *tv)
|
|
{
|
|
struct timeval curr;
|
|
long t;
|
|
|
|
if (tv->tv_sec == 0 && tv->tv_usec == 0) {
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: cache invalid\n");
|
|
return 1;
|
|
}
|
|
|
|
gettimeofday(&curr, NULL);
|
|
|
|
if ((t = timediff(&curr, tv)) < FT857_CACHE_TIMEOUT) {
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: using cache (%ld ms)\n", t);
|
|
return 0;
|
|
} else {
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: cache timed out (%ld ms)\n", t);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
static int ft857_get_status(RIG *rig, int status)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
struct timeval *tv;
|
|
unsigned char *data;
|
|
int len;
|
|
int n;
|
|
|
|
switch (status) {
|
|
case FT857_NATIVE_CAT_GET_FREQ_MODE_STATUS:
|
|
data = p->fm_status;
|
|
len = YAESU_CMD_LENGTH;
|
|
tv = &p->fm_status_tv;
|
|
break;
|
|
case FT857_NATIVE_CAT_GET_RX_STATUS:
|
|
data = &p->rx_status;
|
|
len = 1;
|
|
tv = &p->rx_status_tv;
|
|
break;
|
|
case FT857_NATIVE_CAT_GET_TX_STATUS:
|
|
data = &p->tx_status;
|
|
len = 1;
|
|
tv = &p->tx_status_tv;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR, "ft857_get_status: Internal error!\n");
|
|
return -RIG_EINTERNAL;
|
|
}
|
|
|
|
serial_flush(&rig->state.rigport);
|
|
|
|
write_block(&rig->state.rigport, (char *) p->pcs[status].nseq, YAESU_CMD_LENGTH);
|
|
|
|
if ((n = read_block(&rig->state.rigport, (char *) data, len)) < 0)
|
|
return n;
|
|
|
|
if (n != len)
|
|
return -RIG_EIO;
|
|
|
|
gettimeofday(tv, NULL);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
int ft857_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
if (check_cache_timeout(&p->fm_status_tv))
|
|
if ((n = ft857_get_status(rig, FT857_NATIVE_CAT_GET_FREQ_MODE_STATUS)) < 0)
|
|
return n;
|
|
|
|
*freq = from_bcd_be(p->fm_status, 8) * 10;
|
|
|
|
return -RIG_OK;
|
|
}
|
|
|
|
int ft857_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
if (check_cache_timeout(&p->fm_status_tv))
|
|
if ((n = ft857_get_status(rig, FT857_NATIVE_CAT_GET_FREQ_MODE_STATUS)) < 0)
|
|
return n;
|
|
|
|
switch (p->fm_status[4]) {
|
|
case 0x00:
|
|
*mode = RIG_MODE_LSB;
|
|
break;
|
|
case 0x01:
|
|
*mode = RIG_MODE_USB;
|
|
break;
|
|
case 0x02:
|
|
case 0x82:
|
|
*mode = RIG_MODE_CW;
|
|
break;
|
|
case 0x03:
|
|
case 0x83:
|
|
*mode = RIG_MODE_CWR;
|
|
break;
|
|
case 0x04:
|
|
*mode = RIG_MODE_AM;
|
|
break;
|
|
case 0x06:
|
|
*mode = RIG_MODE_WFM;
|
|
break;
|
|
case 0x08:
|
|
case 0x88:
|
|
*mode = RIG_MODE_FM;
|
|
break;
|
|
case 0x0a:
|
|
case 0x8a:
|
|
*mode = RIG_MODE_RTTY;
|
|
break;
|
|
case 0x0c:
|
|
case 0x8c:
|
|
*mode = RIG_MODE_PKTFM;
|
|
break;
|
|
default:
|
|
*mode = RIG_MODE_NONE;
|
|
}
|
|
|
|
*width = RIG_PASSBAND_NORMAL;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
if (check_cache_timeout(&p->tx_status_tv))
|
|
if ((n = ft857_get_status(rig, FT857_NATIVE_CAT_GET_TX_STATUS)) < 0)
|
|
return n;
|
|
|
|
*split = ((p->tx_status & 0x20) == 0) ? RIG_SPLIT_ON : RIG_SPLIT_OFF;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
if (check_cache_timeout(&p->tx_status_tv))
|
|
if ((n = ft857_get_status(rig, FT857_NATIVE_CAT_GET_TX_STATUS)) < 0)
|
|
return n;
|
|
|
|
*ptt = ((p->tx_status & 0x80) == 0);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
static int ft857_get_pometer_level(RIG *rig, value_t *val)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
int n;
|
|
|
|
if (check_cache_timeout(&p->tx_status_tv))
|
|
if ((n = ft857_get_status(rig, FT857_NATIVE_CAT_GET_TX_STATUS)) < 0)
|
|
return n;
|
|
|
|
/* Valid only if PTT is on */
|
|
if ((p->tx_status & 0x80) == 0)
|
|
val->f = ((p->tx_status & 0x0F) / 15.0);
|
|
else
|
|
val->f = 0.0;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
static int ft857_get_smeter_level(RIG *rig, value_t *val)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
int n;
|
|
|
|
if (check_cache_timeout(&p->rx_status_tv))
|
|
if ((n = ft857_get_status(rig, FT857_NATIVE_CAT_GET_RX_STATUS)) < 0)
|
|
return n;
|
|
|
|
n = (p->rx_status & 0x0F) - 9;
|
|
|
|
val->i = n * ((n > 0) ? 10 : 6);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
|
|
{
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
switch (level) {
|
|
case RIG_LEVEL_STRENGTH:
|
|
return ft857_get_smeter_level(rig, val);
|
|
|
|
case RIG_LEVEL_RFPOWER:
|
|
return ft857_get_pometer_level(rig, val);
|
|
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
if (check_cache_timeout(&p->rx_status_tv))
|
|
if ((n = ft857_get_status(rig, FT857_NATIVE_CAT_GET_RX_STATUS)) < 0)
|
|
return n;
|
|
|
|
/* TODO: consider bit 6 too ??? (CTCSS/DCS code match) */
|
|
if (p->rx_status & 0x80)
|
|
*dcd = RIG_DCD_OFF;
|
|
else
|
|
*dcd = RIG_DCD_ON;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static int ft857_read_ack(RIG *rig)
|
|
{
|
|
#if (FT857_POST_WRITE_DELAY == 0)
|
|
char dummy;
|
|
int n;
|
|
|
|
if ((n = read_block(&rig->state.rigport, &dummy, 1)) < 0) {
|
|
rig_debug(RIG_DEBUG_ERR, "ft857: error reading ack\n");
|
|
return n;
|
|
}
|
|
|
|
rig_debug(RIG_DEBUG_TRACE,"ft857: ack received (%d)\n", dummy);
|
|
|
|
if (dummy != 0)
|
|
return -RIG_ERJCTED;
|
|
#endif
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* private helper function to send a private command sequence.
|
|
* Must only be complete sequences.
|
|
*/
|
|
static int ft857_send_cmd(RIG *rig, int index)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
|
|
if (p->pcs[index].ncomp == 0) {
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: Incomplete sequence\n");
|
|
return -RIG_EINTERNAL;
|
|
}
|
|
|
|
write_block(&rig->state.rigport, (char *) p->pcs[index].nseq, YAESU_CMD_LENGTH);
|
|
return ft857_read_ack(rig);
|
|
}
|
|
|
|
/*
|
|
* The same for incomplete commands.
|
|
*/
|
|
static int ft857_send_icmd(RIG *rig, int index, unsigned char *data)
|
|
{
|
|
struct ft857_priv_data *p = (struct ft857_priv_data *) rig->state.priv;
|
|
unsigned char cmd[YAESU_CMD_LENGTH];
|
|
|
|
if (p->pcs[index].ncomp == 1) {
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: Complete sequence\n");
|
|
return -RIG_EINTERNAL;
|
|
}
|
|
|
|
cmd[YAESU_CMD_LENGTH - 1] = p->pcs[index].nseq[YAESU_CMD_LENGTH - 1];
|
|
memcpy(cmd, data, YAESU_CMD_LENGTH - 1);
|
|
|
|
write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
|
|
return ft857_read_ack(rig);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
int ft857_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
|
|
{
|
|
unsigned char data[YAESU_CMD_LENGTH - 1];
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft857: requested freq = %"PRIfreq" Hz\n", freq);
|
|
|
|
/* fill in the frequency */
|
|
to_bcd_be(data, (freq + 5) / 10, 8);
|
|
|
|
return ft857_send_icmd(rig, FT857_NATIVE_CAT_SET_FREQ, data);
|
|
}
|
|
|
|
int ft857_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
|
|
{
|
|
int index; /* index of sequence to send */
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft857: generic mode = %x \n", mode);
|
|
|
|
switch(mode) {
|
|
case RIG_MODE_AM:
|
|
index = FT857_NATIVE_CAT_SET_MODE_AM;
|
|
break;
|
|
case RIG_MODE_CW:
|
|
index = FT857_NATIVE_CAT_SET_MODE_CW;
|
|
break;
|
|
case RIG_MODE_USB:
|
|
index = FT857_NATIVE_CAT_SET_MODE_USB;
|
|
break;
|
|
case RIG_MODE_LSB:
|
|
index = FT857_NATIVE_CAT_SET_MODE_LSB;
|
|
break;
|
|
case RIG_MODE_RTTY:
|
|
index = FT857_NATIVE_CAT_SET_MODE_DIG;
|
|
break;
|
|
case RIG_MODE_FM:
|
|
index = FT857_NATIVE_CAT_SET_MODE_FM;
|
|
break;
|
|
case RIG_MODE_WFM:
|
|
index = FT857_NATIVE_CAT_SET_MODE_FM;
|
|
break;
|
|
case RIG_MODE_CWR:
|
|
index = FT857_NATIVE_CAT_SET_MODE_CWR;
|
|
break;
|
|
case RIG_MODE_PKTFM:
|
|
index = FT857_NATIVE_CAT_SET_MODE_PKT;
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
if (width != RIG_PASSBAND_NORMAL)
|
|
return -RIG_EINVAL;
|
|
|
|
return ft857_send_cmd(rig, index);
|
|
}
|
|
|
|
int ft857_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
|
|
{
|
|
int index, n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: ft857_set_split_vfo called\n");
|
|
|
|
switch(split) {
|
|
case RIG_SPLIT_ON:
|
|
index = FT857_NATIVE_CAT_SPLIT_ON;
|
|
break;
|
|
case RIG_SPLIT_OFF:
|
|
index = FT857_NATIVE_CAT_SPLIT_OFF;
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
n = ft857_send_cmd(rig, index);
|
|
|
|
if (n < 0 && n != -RIG_ERJCTED)
|
|
return n;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
|
|
{
|
|
int index, n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: ft857_set_ptt called\n");
|
|
|
|
switch(ptt) {
|
|
case RIG_PTT_ON:
|
|
index = FT857_NATIVE_CAT_PTT_ON;
|
|
break;
|
|
case RIG_PTT_OFF:
|
|
index = FT857_NATIVE_CAT_PTT_OFF;
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
n = ft857_send_cmd(rig, index);
|
|
|
|
if (n < 0 && n != -RIG_ERJCTED)
|
|
return n;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
|
|
{
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
switch (func) {
|
|
case RIG_FUNC_LOCK:
|
|
if (status)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_LOCK_ON);
|
|
else
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_LOCK_OFF);
|
|
|
|
case RIG_FUNC_TONE:
|
|
if (status)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_ENC_ON);
|
|
else
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
|
|
case RIG_FUNC_TSQL:
|
|
if (status)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_ON);
|
|
else
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
|
|
#if 0
|
|
case RIG_FUNC_CODE: /* this doesn't exist */
|
|
if (status)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_DCS_ENC_ON);
|
|
else
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
|
|
case RIG_FUNC_DSQL: /* this doesn't exist */
|
|
if (status)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_DCS_ON);
|
|
else
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
#endif
|
|
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
}
|
|
|
|
int ft857_set_dcs_code(RIG *rig, vfo_t vfo, tone_t code)
|
|
{
|
|
unsigned char data[YAESU_CMD_LENGTH - 1];
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: set DCS code (%d)\n", code);
|
|
|
|
if (code == 0)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
|
|
/* fill in the DCS code - the rig doesn't support separate codes... */
|
|
to_bcd_be(data, code, 4);
|
|
to_bcd_be(data + 2, code, 4);
|
|
|
|
if ((n = ft857_send_icmd(rig, FT857_NATIVE_CAT_SET_DCS_CODE, data)) < 0)
|
|
return n;
|
|
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_DCS_ENC_ON);
|
|
}
|
|
|
|
int ft857_set_ctcss_tone(RIG *rig, vfo_t vfo, tone_t tone)
|
|
{
|
|
unsigned char data[YAESU_CMD_LENGTH - 1];
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: set CTCSS tone (%.1f)\n", tone / 10.0);
|
|
|
|
if (tone == 0)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
|
|
/* fill in the CTCSS freq - the rig doesn't support separate tones... */
|
|
to_bcd_be(data, tone, 4);
|
|
to_bcd_be(data + 2, tone, 4);
|
|
|
|
if ((n = ft857_send_icmd(rig, FT857_NATIVE_CAT_SET_CTCSS_FREQ, data)) < 0)
|
|
return n;
|
|
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_ENC_ON);
|
|
}
|
|
|
|
int ft857_set_dcs_sql(RIG *rig, vfo_t vfo, tone_t code)
|
|
{
|
|
unsigned char data[YAESU_CMD_LENGTH - 1];
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: set DCS sql (%d)\n", code);
|
|
|
|
if (code == 0)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
|
|
/* fill in the DCS code - the rig doesn't support separate codes... */
|
|
to_bcd_be(data, code, 4);
|
|
to_bcd_be(data + 2, code, 4);
|
|
|
|
if ((n = ft857_send_icmd(rig, FT857_NATIVE_CAT_SET_DCS_CODE, data)) < 0)
|
|
return n;
|
|
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_DCS_ON);
|
|
}
|
|
|
|
int ft857_set_ctcss_sql(RIG *rig, vfo_t vfo, tone_t tone)
|
|
{
|
|
unsigned char data[YAESU_CMD_LENGTH - 1];
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: set CTCSS sql (%.1f)\n", tone / 10.0);
|
|
|
|
if (tone == 0)
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_DCS_OFF);
|
|
|
|
/* fill in the CTCSS freq - the rig doesn't support separate tones... */
|
|
to_bcd_be(data, tone, 4);
|
|
to_bcd_be(data + 2, tone, 4);
|
|
|
|
if ((n = ft857_send_icmd(rig, FT857_NATIVE_CAT_SET_CTCSS_FREQ, data)) < 0)
|
|
return n;
|
|
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_CTCSS_ON);
|
|
}
|
|
|
|
int ft857_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t shift)
|
|
{
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: set repeter shift = %i\n", shift);
|
|
|
|
switch (shift) {
|
|
case RIG_RPT_SHIFT_NONE:
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_RPT_SHIFT_SIMPLEX);
|
|
case RIG_RPT_SHIFT_MINUS:
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_RPT_SHIFT_MINUS);
|
|
case RIG_RPT_SHIFT_PLUS:
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_RPT_SHIFT_PLUS);
|
|
}
|
|
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
int ft857_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs)
|
|
{
|
|
unsigned char data[YAESU_CMD_LENGTH - 1];
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: set repeter offs = %li\n", offs);
|
|
|
|
/* fill in the offset freq */
|
|
to_bcd_be(data, offs / 10, 8);
|
|
|
|
return ft857_send_icmd(rig, FT857_NATIVE_CAT_SET_RPT_OFFSET, data);
|
|
}
|
|
|
|
int ft857_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
|
|
{
|
|
unsigned char data[YAESU_CMD_LENGTH - 1];
|
|
int n;
|
|
|
|
if (vfo != RIG_VFO_CURR)
|
|
return -RIG_ENTARGET;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "ft857: set rit = %li)\n", rit);
|
|
|
|
/* fill in the RIT freq */
|
|
data[0] = (rit < 0) ? 255 : 0;
|
|
data[1] = 0;
|
|
to_bcd_be(data + 2, labs(rit) / 10, 4);
|
|
|
|
if ((n = ft857_send_icmd(rig, FT857_NATIVE_CAT_SET_CLAR_FREQ, data)) < 0)
|
|
return n;
|
|
|
|
/* the rig rejects if these are repeated - don't confuse user with retcode */
|
|
if (rit == 0)
|
|
ft857_send_cmd(rig, FT857_NATIVE_CAT_CLAR_OFF);
|
|
else
|
|
ft857_send_cmd(rig, FT857_NATIVE_CAT_CLAR_ON);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft857_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
|
|
{
|
|
switch (op) {
|
|
case RIG_OP_TOGGLE:
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_SET_VFOAB);
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* This doesn't seem to work on FT857. It might work with FT817 though.
|
|
*/
|
|
int ft857_set_powerstat(RIG *rig, powerstat_t status)
|
|
{
|
|
switch (status) {
|
|
case RIG_POWER_OFF:
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_PWR_OFF);
|
|
case RIG_POWER_ON:
|
|
return ft857_send_cmd(rig, FT857_NATIVE_CAT_PWR_ON);
|
|
case RIG_POWER_STANDBY:
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|